Electrochemical deposition of indium: nucleation mode and diffusional limitation

the electrochemical deposition of indium metal from InCl₃ solutions was investigated. Cyclovoltammetric experiments showed that the initial hydrogen evolution reaction, observed together with the metal deposition on Pt surface, is blocked when the surface is covered by In. At large cathodic potentials, the current is diffusion-limited. The scan rate dependence of cyclovoltammograms allowed the determination of the diffusion coefficient of In³⁺ ions, 8.18 × 10^–6 cm²/s, using the Delahay equation. The activation energy of diffusion, determined from the temperature dependence of cyclovoltammograms, is about 0.3 eV (23 kJ/mol). Chrono-amperometric experiments are consistent with the cyclovoltammetry; the In³⁺ diffusion coefficient determined using the Cottrell law is in good agreement with the value determined by the Randles-?ev?ik equation. Moreover the use of the nucleation models developed by Scharifker and Hills showed a progressive nucleation mode. Electron microscopy observations and X-ray diffraction patterns confirmed the formation of crystalline indium deposits.     

Comparative Adsorption of Lead(II) on Flake and Bead‐Types of Chitosan

The adsorption of Pb(II) ions from aqueous solutions by chitosan flakes and beads was studied. The chitosan beads were prepared by casting an acidic chitosan solution into alkaline solution. Experiments were carried out as a function of pH, agitation period and initial concentration of Pb²⁺ ions. The uptake of Pb²⁺ ions from aqueous solution was determined from changes in concentration as measured by atomic absorption spectroscopy. The maximum uptake of Pb²⁺ ions on chitosan beads was greater than that on chitosan flakes. Adsorption isothermal data could be interpreted by the Langmuir equation. The experimental data of the adsorption equilibrium from Pb²⁺ ion solutions correlated well with the Langmuir isotherm equation. SEM analyses were also conducted for visual examination of the chitosan flakes and beads. Physical properties including surface area and average pore diameter were characterized by N₂ adsorption experiment.     

Adsorption kinetic, isotherm and thermodynamic studies of Sr2+ onto hexagonal tungsten oxide

Hexagonal tungsten oxide (hex-WO₃) with exchangeable sodium and ammonium cations located in hexagonal channel was synthesized by a facile hydrothermal treatment of sodium tungstate dihydrate in concentrated HCl solution in the presence of ammonium sulfate. An attempt was made to assess the potential of hex-WO₃ for the adsorption of Sr²⁺ ions from acidic radioactive waste solutions. Adsorption of Sr²⁺ reached equilibrium very quickly in 2 h in acidic aqueous solution. Maximum removal of Sr²⁺ ions occurred at pH 4. Equilibrium studies showed that the extent of Sr²⁺ ions uptake by hex-WO₃ was better described by the Freundlich isotherm in comparison with the Langmuir model. The thermodynamic parameters showed that the adsorption of Sr²⁺ ions onto hex-WO₃ was spontaneous and exothermic under the studied conditions.     

Study of the interaction of mono-, di-, and trisubstituted sodium orthophosphates with thermally activated dolomite

Interaction of dolomite thermally treated at 800°C with solutions of mono-, di-, and trisubstituted sodium phosphate was studied. It was shown that thermally treated dolomite binds 0.75 to 3.0 mmol g^–1 of phosphorus, depending on the nature of a phosphating reagent, and the interaction mostly occurs with magnesium oxide, which enables use of this kind of dolomite as a sorbent of phosphate ions. It was found that the nature of the phosphating reagent affects the chemical and phase composition of the materials obtained, as well as their sorption properties with respect to heavy metal ions. The products formed in acid-free phosphation of dolomite have high sorption capacity, from 1.5 to 6.8 mmol g^–1 for Pb²⁺, Zn²⁺, Cu²⁺, Cd²⁺, Ni²⁺, Sr²⁺, and Co²⁺ ions, which enables their use as effective sorbents for heavy metal ions.urning.     

The Kinetics of Indium Electroreduction from Chloride Solutions

The electroreduction of indium on indium electrode (99.98%) in perchlorate-containing chloride electrolytes is studied by the methods of linear sweep and cyclic voltammetry, impedance spectroscopy, and chronoamperometry. The indium electroreduction is limited by diffusion, the reaction rate constant is 1.3 10^–4 cm/s at the indium salt concentration of 0.1 M. The values of the apparent rate constant for the charge transfer stage found by linear sweep and cyclic voltammetry and also by impedance spectroscopy are 2.37 × 10^–3, 3.62 × 10^–3, 3.06 × 10^–3 cm/s, respectively. The values of diffusion coefficient of indium(III) ions calculated according to the Cottrell equation based on chronoamperametric measurements and from the Warburg impedance found by impedance spectroscopy are in good agreement. The presence of the Gerischer impedance is stated, which suggests that a homogeneous reaction of formation of indium chloride complexes proceeds and its mechanism is chemical-electrochemical.

     

Adsorption characteristics of traces of radium on membrane filters,glass and polyethylene

Adsorption of radium was studied on glass and polyethylene from aqueous solutions containing 8–40 pg·dm^{–3 224}Ra and on membrane filters, glass and polyethylene bottles from waste and river waters containing 2–170 pg·dm^{–3 226}Ra. The adsorption from aqueous solutions was determined as a function of pH and composition of the solutions and interpreted as due to ion exchange of Ra²⁺ ions for counter ions in the electric double layer on glass and polyethylene or due to chemisorption of RaSO₄ (RaCO₃) ion pairs on glass. Borosilicate glass adsorbed radium substantially more than polyethylene. The adsorption of dissolved forms of radium from the waste and river waters during storage and membrane filtration of the waters was negligible, but a significant loss of particulate forms of radium was sometimes observed during the storage. It has been recommended to separate dissolved and particulate forms of radium soon after the sampling and to prefer polyethylene to glass as container material for storage of dissolved forms of radium.     

Adsorption of Uranyl Ions into Poly(Acrylamide‐co‐Acrylic Acid) Hydrogels Prepared by Gamma Irradiation

Acrylamide (AAm)/Acrylic Acid (AAc) copolymers have been prepared by gamma irradiation of binary mixtures at three different compositions where the acrylamide/acrylic acid mole ratios varied around 15, 20, and 30%. Threshold dose for 100% conversion of monomers into hydrogels was found to be 8.0 kGy. Poly(Acrylamide‐co‐Acrylic Acid) (poly(AAm‐co‐AAc)) hydrogels have been considered for the removal of uranyl ions from aqueous solutions. Swelling behavior of these hydrogels was determined in distilled water at different pH values and in aqueous solutions of uranyl ions. The results of swelling tests at pH 8.0 indicated that poly(AAm‐co‐AAc) hydrogel, containing 15% acrylamide showed maximum % swelling. Diffusion of water and aqueous solutions of uranyl ion into hydrogels was found to be non‐Fickian in character and their diffusion coefficients were calculated. The effect of pH, composition of hydrogel, and concentration of uranyl ions on the adsorption process were studied at room temperature. It was found that one gram of dry poly(AAm‐co‐AAc) hydrogel adsorbed 70–320 mg and 70–400 mg uranyl ions from aqueous solutions of uranyl nitrate and uranyl acetate in the initial concentration range of 50–1500 mg UO₂ ²⁺L^?, depending on the amount of AAc in the hydrogels, respectively. Adsorption isotherms were constructed for poly(AAm‐co‐AAc)–uranyl ion system indicating an S type of adsorption in the Giles classification system. It is concluded that crosslinked poly(AAm‐co‐AAc) hydrogels can be successfully used for the removal of uranyl ions from their aqueous solutions.     

Separation of Cr ions from Co and mn ions by poly (bis(phenoxy) phosphazene) membranes

Poly(bis (phenoxy)phosphazene) was synthesized and cast by knife techniques into membranes supported on porous Inconel plates for separation testing. A solution of Cr³⁺, Co²⁺ and Mn^2/t+ nitrates was used as the feed solution in diffusion experiments conducted from 25 to 180°C. It was discovered that Co²⁺ and Mn²⁺ ions had much higher diffusion coefficients than Cr³⁺ ions through the membrane, with a maximum difference occurring near 100°C. The lower diffusion associated with Cr³⁺ ions is believed to be due to formation of polymerized hydrated Cr³⁺ ions that are too large to penetrate the membranes. Diffusion activation energies are reported.     

Highly Sensitive Spectrofluorimetric Determination of Trace Amounts of Indium with 5-Bromine-Salicylaldehyde Salicyloylhygrazone

The fluorescence reaction of 5-bromine-salicylaldehyde salicyloylhydrazone (5-Br-SASH) with indium was studied in detail. Based on this chelating reaction, a sensitive spectrofluorimetric method was developed for the determination of indium in a water–ethanol (63%) medium at PH 4.6. Under these conditions, the In-5-Br-SASH complex has excitation and emission maxima at 395 nm and 461 nm, respectively. The linear range of the method is from 0 to 1000 ng mL^–1and the detection limit is 2.4 ng mL^–1of indium. The molar ratio of indium to the reagent is 1 : 3. Interferences from other ions were studied. The method was successfully applied to the determination of indium in lead, tin, spelter, zinc sulfide using the standard additions method.     

Electrical conductivity of solutions of copper(II) nitrate crystalohydrate in dimethyl sulfoxide

Conductometry is used to investigate the electric conductivity of Cu(NO₃)₂ ? 3Н₂О solutions in dimethyl sulfoxide in the 0.01–2.82 M range of concentrations and at temperatures of 288–318 K. The limiting molar conductivity of the electrolyte and the mobility of Cu²⁺ and NO₃^- ions, the effective coefficients of diffusion of copper(II) ions and nitrate ions, and the degree and constant of electrolytic dissociation are calculated for different temperatures from the experimental results. It is established that solutions containing 0.1–0.6 M copper nitrate trihydrate in DMSO having low viscosity and high electrical conductivity can be used in electrochemical deposition.     

Preparation of guanidinylated carboxymethyl chitosan and its application in the diffusive gradients in thin films (DGT) technique for measuring labile trace metals in water

ABSTRACT

Guanidinylated carboxymethyl chitosan (GCMCS) was prepared via the guanidinylation of carboxymethyl chitosan (CMCS). A device employing the diffusive gradients for thin films (DGT) technique was made using a GCMCS aqueous solution as the binding agent and a cellulose acetate dialysis membrane (CADM) as the diffusion phase to measure labile Cu²⁺, Pb²⁺ and Cd²⁺ in water. The percentage uptake (U%) values of labile Cu²⁺, Pb²⁺ and Cd²⁺ in a synthetic water sample were almost consistent with the theoretical values at 101.6 ± 2.8%, 104.6 ± 6.1% and 95.9 ± 4.4%, respectively. The optimum pH ranges for the measurement of labile Cu²⁺, Pb²⁺ and Cd²⁺ were 3.0–7.0, 3.0–7.0 and 4.0–8.0, respectively. The ionic strength mainly affected the diffusion of metal ions in the CADM. The diffusion rates decreased with increasing concentrations of NaNO₃ solutions. The application of GCMCS-DGT in natural water and industrial wastewater showed that dissolved organic carbon (DOC) only affects metal species, and the accurate determination of labile Cu²⁺, Pb²⁺ and Cd²⁺ can be achieved when the diffusion coefficients of these metal ions in the diffusion phase have been determined. GCMCS is suitable for DGT application as a chelating agent for metal ions.     

Diffusion with hydrolysis and ion association in aqueous solutions of beryllium sulfate

Taylor dispersion is used to measure mutual diffusion coefficients for aqueous solutions of beryllium sulfate at concentrations from 0.005 to 1 mol-L^–1 at 25°C. Least-squares analysis of the dispersion profiles shows that diffusion of the partially hydrolyzed salt produces a small additional flow of sulfuric acid, about 0.04 mol sulfuric acid per mole of total beryllium sulfate. Ternary diffusion coefficients measured for the aqueous BeSO₄–H₂SO₄ system are qualitatively consistent with Nernst-Planck predictions based on the formation of beryllium sulfate ion pairs, bisulfate ions, and the hydrolysis equilibria 2Be²⁺+H₂O= Be₂OH³⁺+H⁺, 3Be²⁺+2H₂O=Be₃(OH) ₂ ⁴⁺ +2H⁺. Except for very dilute solutions, the predicted flow of sulfuric acid is small compared to the flow of beryllium sulfate because most of the beryllium ions are protected from hydrolysis by the formation of BeSO₄ ion pairs, and most of the hydrogen ions produced by hydrolysis are converted to less-mobile bisulfate ions.     

Synthesis of propyl aminopyridine modified magnetite nanoparticles for cadmium (II) adsorption in aqueous solutions

In this study, 2‐aminopyridine functionalized magnetite nanoparticles were chemically synthesized and used for removing Cd²⁺ ions from aqueous solutions. The synthesized nanoparticles were characterized by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive analysis of X‐rays (EDX), thermogravimetric analysis (TGA) and vibrating sample magnetometer (VSM). The SEM results showed the synthesized magnetite nanoparticles have particle size around 26 nm. The effects of several variables including solution pH and volume, adsorbent mass, ionic strength and contact time on the Cd²⁺ adsorption were studied in batch experiments and finally the optimum conditions for adsorption were obtained. The kinetic data were investigated by pseudo‐ first‐order, pseudo‐ second‐order, intraparticle diffusion and Elovich kinetic models and data were described reasonably by pseudo‐ second‐order model (R² = 0.9996) with q_e = 2.31 mg g^?1. Adsorption data were analyzed using Langmuir, Freundlich and Temkin isotherm models. The results indicated that the data were well fitted to the Freundlich isotherm model (R² = 0.9907). After study the possible interference effect of foreign ions on Cd²⁺ removal, the applicability of the proposed nanoparticles for adsorption from real samples confirmed the successfully removal of Cd²⁺ ions with removal efficiency higher than 92%. The obtained results showed that the synthesized nanoparticles as a reusable adsorbent can act as a good choice for Cd²⁺ removal with an easy procedure.     

(Sodium Alginate/Acrylamide) Semi‐Interpenetrating Polymer Networks and their Usability on Removal of Lead,Cadmium, Nickel Ions

In this study, (sodium alginate (NaAlg)/acrylamide (AAm)) interpenetrating polymer networks (IPN) have been prepared at three different compositions, where the sodium alginate composition varies 1, 2, and 3% (w/v) in 50% (w/v) acrylamide solutions. These solutions have been irradiated with a ⁶⁰Co‐γ source at different doses. The percent conversion was determined gravimetrically and 100% gelation was achieved at the 10.0 kGy dose. The swelling results at pH 7.0 and 9.0 indicated that (NaAlg/AAm)3IPN hydrogel, containing 3% NaAlg showed maximum % swelling in water, with swelling increasing in the order of Ni²⁺>Cd²⁺>Pb²⁺. Diffusion in aqueous solutions of metal ions within (NaAlg/AAm)IPN hydrogels was found to be Fickian character. Diffusion coefficients of (NaAlg/AAm)IPN hydrogels in water and aqueous solutions of metal ions were calculated. The maximum weight loss temperature and half life temperature for NaAlg, PAAm, (NaAlg/AAm)IPN and (NaAlg/AAm)IPN‐metal ion systems were found from thermal analysis studies. In the adsorption experiments, the efficiency of (NaAlg/AAm)IPN hydrogels to adsorb nickel, cadmium and lead ions from water was studied. (NaAlg/AAm)IPN hydrogels showed different adsorption for different aqueous solution of metal ion at pH 7.0. Adsorption isotherms were constructed for the (NaAlg/AAm)IPN‐metal ion systems. S type adsorption in the Giles classification system was found.     

Rapid Fluorometric Determination of Trace Indium(III) in Microemulsion Medium after Preconcentration and Separation by Sulphydryl Dextrane Gel

A new highly sensitive, stable, and accurate fluorometric method for the determination of indium(III) has been established in cetyltrimethylammonium bromide(CTMAB) microemulsion media. The excellent color-forming reagent 2,6,7-trihydroxy-9-(3,5-dibromo-4-hydroxyphenyl) fluorone (DBH-PF) reacts with indium(III) to form a purple complex with a 3 : 1 (ligand to metal) ratio in HAc-NaAc buffer solution at pH 4.94. The emission peak occurs at 556 nm with excitation at 525 nm. Indium(III) can be determined in the linear range of 0.005–0.30 μg mL⁻¹ with a detection limit of 0.0029 μg mL⁻¹. Foreign ions are eliminated by preconcentration and separation with sulfhydryl dextranegel (SDG). The proposed method has been satisfactorily examined for the determination of indium(III) in ore and sludge samples. The relative standard deviations are in all instances less than 3.0%, and the recoveries are between 94.7, and 99.5%. __________ From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 9, 2005, pp. 979–984. Original English Text Copyright ? 2005 by Wei Qin, Du Bin, Zhang Hui, Li Yan, Li Zaijun. The text was submitted by the authors in English.     

Electrochemical Study of Indium in a Water‐Stable 1‐Ethyl‐3‐Methylimidazolium Chloride/Tetrafluoroborate Room Temperature Ionic Liquid

The electrochemistry of indium species was investigated at glassy carbon, tungsten and nickel electrodes in a basic 1‐ethyl‐3‐methylimidazolium chloride/tetrafluoroborate ionic liquid. Amperometric titration experiments suggest that In(III) chloride is complexed as [InCl₅]^2? in this ionic liquid. The electrochemical reduction of [InCl₅]^2? to indium metal is preceded by overpotential driven nucleations. The effective anodic dissolution of indium to indium(III) requires, however, the presence of sufficient chloride ions at the electrode surface. The electrodeposition of indium at glassy carbon and tungsten electrodes proceeds via three‐dimensional instantaneous nucleation with diffusion‐controlled growth of the nuclei. At the nickel electrode, the deposition proceeds via three‐dimensional progressive nucleation with diffusion‐controlled growth of the nuclei. Raising the deposition temperature decreases the average radius of the individual nuclei, r. Scanning electron microscopic and x‐ray diffraction data indicated that bulk crystalline indium electrodeposits could be prepared on nickel substrates within a temperature range between 30 and 120 °C.     

Ternary mutual diffusion coefficients of KCl-LaCl3-water mixtures from taylor dispersion profiles

The Taylor dispersion (peak-broadening) method is used to measure ternary mutual diffusion coefficients at 25°C for fifteen different compositions of the system KCl–LaCl ₃ -water at ionic strengths from 0.02 to 0.24 mol-dm^–3. The diffusion coefficients are evaluated by least-squares analysis of the refractive index profiles across the dispersed solute peaks. Diffusing LaCl ₃ is found to cotransport significant amounts of KCl. Monte Carlo simulations are used to estimate the precision of ternary diffusion coefficients determined by the dispersion method. Tracer diffusion coefficients are also reported for La ³⁺ ions in aqueous KCl solutions and for K⁺ ions in aqueous LaCl ₃ solutions.     

Reduction of Cd(II) and Mn(II) at the Dropping Mercury Electrode in the Presence of 1,3,5-Trihydroxybenzene in Aqueous Sodium Perchlorate

Reduction of Cd²⁺ at the dropping mercury electrode in solutions of 1, 3, 5-trihydroxybenzene was carried out in nonbuffer solutions of 0.1 M NaClO₄. The polarogram consists of two waves, the first wave can be taken in quantitative determination of Cd²⁺ in solutions containing 3.5 mM 1, 3, 5-trihydroxybenzene in 0.1 M NaClO₄. Mn²⁺ produces single well-defined diffusion controlled irreversible wave whose half-wave potential shifts to a more negative value with increasing 1, 3, 5-trihydroxybenzene. Me(II) forms two weak complexes, MX₁ and MX₂ at 25°. The behaviour of this metal ions is summarized.     

Adsorption of Pb(2+) ions on nanosized gamma-Fe(2)O(3): formation of surface ternary complexes on ligand complexation

Adsorption of Pb²⁺ ions on the combustion derived nanosized γ-Fe₂O₃ and its thiourea complex composite is reported. The adsorbents upon adsorption of Pb²⁺ ions are characterised by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray microanalysis and infrared spectroscopy techniques. The eluent is characterised by atomic absorption spectroscopy for the estimation of Pb²⁺ ions. The reduction in the amount of lead after adsorption was estimated to be around 50% in case of complex composite adsorbent and around 15% in case of the γ-Fe₂O₃ adsorbents. Orthorhombic PbSO₄ precipitated out from the eluent and is reported with a model reaction. Adsorption of lead onto the complex composite is explained through the formation of a surface tertiary complex. The advantage of employing a thiourea-γ-Fe₂O₃ complex composite as solid adsorbent for the adsorption of heavy metal pollutants is envisaged in the present investigation.     

Fragmentation of protonated O,O-dimethyl O-aryl phosphorothionates in tandem mass spectral analysis

A study was carried out on the fragmentation of 12 protonated O,O-dimethyl O-aryl phosphorothionates by tandem quadrupole mass spectrometry. Some of the studied compounds are used in agriculture as pesticides. Energy-resolved and pressure-resolved experiments were performed on the [M + H]⁺ ions to investigate the dissociation behavior of the ions with various amounts of internal energy. On collisionally activated dissociation, the [M + H]⁺ ions decompose to yield the [M + H ? CH₃OH]⁺, (CH₃O)₂PS⁺ (m/z 125), and (CH₃O)₂PO⁺ (m/z 109) ions as major fragments. The ions [M + H ? CH₃OH]⁺ and (CH₃O)₂PS⁺ probably arise from the [M + H]⁺ ions of the O,O-dimethyl O-aryl phosphorothionates with the proton on the sulfur or on the oxygen of the phenoxy group. The origin of the hydroxy proton of the methanol fragment was in many cases, surprisingly, the phenyl group and not the reagent gas. This was confirmed by using deuterated isobutane, C₄D₁₀, as reagent gas in Cl. The fragment ions (CH₃O)₂PO⁺ and [ZPhS]⁺ are the results of thiono-thiolo rearrangement reaction. The precursor ion for the ion (CH₃O)₂PO⁺ arises from most compounds upon chemical ionization, whereas the precursor ion for the ion [ZPhS]⁺ arises only from a few compounds upon chemical ionization. The observed fragments imply that several sites carry the extra proton and that these sites get the proton usually upon ionization. The stability order and some characteristics of three protomers of O,O-dimethyl O-phenyl phosphorothionate were investigated by ab initio calculations at the RHF/3-21G* level of theory.