Closed solutions of boundary-value problems of coupled thermoelasticity

Coupled equations of thermoelasticity take into account the effect of nonuniform heating on the medium deformation and that of the dilatation rate on the temperature distribution. As a rule, the coupling coefficients are small and it is assumed, sometimes without proper justification, that the effect of the dilatation rate on the heat conduction process can be neglected. The aim of the present paper is to construct analytical solutions of some model boundary-value problems for a thermoelastic bounded body and to determine the body characteristic dimensions and the medium thermomechanical moduli forwhich it is necessary to take into account that the temperature and displacement fields are coupled. We consider some models constructed on the basis of the Fourier heat conduction law and the generalized Cattaneo-Jeffreys law in which the heat flux inertia is taken into account. The solution is constructed as an expansion in a biorthogonal system of eigenfunctions of the nonself-adjoint operator pencil generated by the coupled equations of motion and heat conduction. For the model problem, we choose a special class of boundary conditions that allows us to exactly determine the pencil eigenvalues.     

一维半无限压电杆的广义的热冲击问题

采用具有两个热松驰时间的G－L广义热弹性理论，研究了一维无限无限长杆在其端部受到热冲击时的边值问题，借助于拉普拉斯正、反变换技术，在所考虑时间非常短的情况下，对问题进行了求解。得到了位移及温度分布的近似妥析角，发现位移及温度分布中分别存在两上阶跃点，并通过数值计算，把温度的分布规律用图形反映了出来，从温度的分布图上可以看出，当任何x的值大于第二个阶跃点的位置值时，温度值都是零，也即在当前所绘定的时刻，热以波的形式沿压电杆仅传播到第二阶跃点的位置，而在第二个阶跃点之后，压电杆上的温度分布保持初始温度；定不同时刻，热波波前的位置也将相应的在压电杆上移动，也即热波波前在压电杆上的位置随考虑时刻不同而不同，这与经典的热传导是完全不同的，它说明热是以波的形式以有限的速度，而不是以无限的速度在介质中进行传播的。     

瞬态热冲击下层合材料板界面的热弹性行为

基于带有两个热松弛时间的G-L广义热弹性理论, 利用有限元方法研究了零阻抗理想界面层合板在瞬态热冲击诱导的位移、应力和温度等通过界面时的热弹性行为. 通过比较不同层中材料的比热容、热导系数、热松弛时间和密度等对界面处的位移、应力和温度的影响, 研究了不同材料参数对复合材料热力学行为影响, 发现不同材料参数将导致热穿过界面时界面处温度、位移和应力发生突变, 研究结果可以为由热引起的层合板挠曲变形提供理论依据.      

Thermoelastic solutions for thermal distributions moving over thin slim rod under memory-dependent three-phase lag magneto-thermoelasticity

Abstract

Enlightened by the Caputo fractional derivative, the present study deals with a novel mathematical model of generalized thermoelasticity to investigate the transient phenomena due to the influence of magnetic field and moving heat source in a rod in the context of three-phase lag (TPL) theory of thermoelasticity. Both ends of the rod are fixed and heat insulated. Employing Laplace transform as a tool, the problem has been transformed into the space-domain and solved analytically. Finally, solutions in the real-time domain are obtained by applying the inverse Laplace transform. Numerical calculation for stress, displacement, and temperature within the rod is carried out and displayed graphically. The effect of moving heat source speed on temperature, stress, and temperature is studied. It is found from the distributions that the temperature, thermally induced displacement and stress of the rod are found to decrease at large source speed. For the better understanding of the effect of moving heat source on all the distributions, three animations are added.     

On the nature of the relaxation time,the Maxwell–Cattaneo and Fourier law in the thermodynamics of a continuous medium,and the scale effects in thermal conductivity

We present the theory of space–time elasticity and demonstrate that it is the extended reversible thermodynamics and gives the coupled model of thermoelasticity and heat conductivity and involves traditional thermoelasticity. We formulate the generally covariant variational model’s dynamic thermoelasticity and heat conductivity in which the basic kinematic and static variables are unified tensor objects (subject, matter). Variation statement defines the whole set of the initial-boundary problems for the 4D vector governing equation (Euler equation), the spatial projections of which define motion equations and the time projection gives the heat conductivity equation. We show that space–time elasticity directly implies the Fourier and the Maxwell–Cattaneo laws of heat conduction. However, space–time elasticity is richer than classical thermoelasticity, and it advocates its own equations of motion for coupled thermoelasticity. Moreover, we establish that the Maxwell–Cattaneo law and Fourier law can be defined for the reversible processes as compatibility equations without introducing dissipation. We argue that the present framework of space–time elasticity should prove adequate to describe the thermoelastic phenomena at low temperatures for interpreting the results of molecular simulations of heat conduction in solids and for the optimal heat and stress management in the microelectronic components and the thermoelectric devices.     

Thermoelasticity without energy dissipation

This paper deals with thermoelastic material behavior without energy dissipation; it deals with both nonlinear and linear theories, although emphasis is placed on the latter. In particular, the linearized theory of thermoelasticity discussed possesses the following properties: (a) the heat flow, in contrast to that in classical thermoelasticity characterized by the Fourier law, does not involve energy dissipation; (b) a constitutive equation for an entropy flux vector is determined by the same potential function which also determines the stress; and (c) it permits the transmission of heat as thermal waves at finite speed. Also, a general uniqueness theorem is proved which is appropriate for linear thermoelasticity without energy dissipation.     

RESTUDY OF COUPLED FIELD THEORIES FOR MICROPOLAR CONTINUA (Ⅰ)──MICROPOLAR THERMOELASTICITY

ＩｎｔｒｏｄｕｃｔｉｏｎＳｏｍｅａｕｔｈｏｒｓｓｔｕｄｉｅｄｔｈｅｃｏｕｐｌｅｄｆｉｅｌｄｐｒｏｂｌｅｍｓｆｏｒｍｉｃｒｏｐｏｌａｒｃｏｎｔｉｎｕａ .Ｅｓｐｅｃｉａｌｌｙ ,Ｗ .Ｎｏｗａｃｋｉｐｕｂｌｉｓｈｅｄａｓｅｒｉｅｓｏｆａｂｏｕｔ 4 0ｓｃｉｅｎｔｉｆｉｃｐａｐｅｒｓｄｅａｌｉｎｇｗｉｔｈｔｈｅｍｉｃｒｏｐｏｌａｒｔｈｅｒｍｏｅｌａｓｔｉｃｉｔｙａｓｗｅｌｌａｓｔｈｅｐｒｏｂｌｅｍｓｏｆｄｉｓｔｏｒｔｉｏｎ ,ｔｈｅｒｍｏｄｉｆｆｕｓｉｏｎ ,ｔｈｅｒｍｏｐｉｅｚｏｅｌｅｃｔｒｉｃｉｔｙａｎｄｍ…     

Generalized thermoelastic infinite transversely isotropic body with a cylindrical cavity due to moving heat source and harmonically varying heat

In this paper, the induced temperature, displacement, and stress fields in an infinite transversely isotropic unbounded medium with cylindrical cavity due to a moving heat source and harmonically varying heat are investigated. This problem is solved in the context of the linear theory of generalized thermoelasticity with dual phase lag model. The governing equations are expressed in Laplace transform domain. Based on Fourier series expansion technique the inversion of Laplace transform is done numerically. The numerical estimates of the displacement, temperature and stress are obtained and presented graphically. The theories of coupled thermoelasticity, generalized thermoelasticity with one relaxation time, and thermoelasticity without energy dissipation can extracted as special cases. Some comparisons have been shown in figures to present the effect of the heat source, dual phase lags parameters and the angular frequency of thermal vibration on all the studied fields.     

Thermal and mechanical analysis of material response to non-steady ramp and steady shock wave loading

Ramp wave experiments on the Sandia Z accelerator provide a new approach to study the rapid compression response of materials at pressures, temperatures and stress or strain rates not attainable in conventional shock experiments. Due to its shockless nature, the ramp wave experiment is often termed as an isentropic (or quasi-isentropic) compression experiment (ICE). However, in reality there is always some entropy produced when materials are subjected to large amplitude compression even under shockless loading. The entropy production mechanisms that cause deformation to deviate from the isentropic process can be attributed to mechanical and thermal dissipations. The former is due to inelasticity associated with various deformation mechanisms and the rate effect that is inherent in all the deformation processes and the latter is due to irreversible heat conduction. The main purpose of the current study is to gain insights into the effects of ramp and shock loading on the entropy production and thermomechanical responses of materials. Another purpose is to investigate the role of heat conduction in the material response to both the non-steady ramp wave and steady shock.Numerical simulations are used to address the aforementioned research objectives. The thermomechanical response associated with a steady shock wave is investigated first by solving a set of nonlinear ordinary differential equations. Using the steady wave solutions as the reference, the material responses under non-steady ramp waves are then studied with numerical wave propagation simulation. It is demonstrated that the material response to ramp and shock loading is essentially a manifestation of the interaction between the time scale associated with the loading and the intrinsic time scales associated with mechanical deformation and heat transfer. At lower loading rates as encountered in ramp loading, the loading path is closer to an isentrope and results in lower entropy production. The reasonable ramp rate to obtain a quasi-isentropic state depends on the intrinsic time scales of the dissipation mechanisms which are strongly material dependent. Thus shockless loading does not necessarily produce an isentropic response. Between two equilibrium states, heat conduction was shown to have significant effect on the temperature history but it contributes little to the overall temperature change if the specific heat remains constant. It also affects the history of entropy, but only the irreversible part of heat conduction contributes to the net entropy change. The various types of thermomechanical responses of materials would manifest themselves more significantly in terms of the thermal history than the mechanical history. Thus temperature measurement appears to be an important experimental tool in distinguishing the various mechanisms for the thermomechancial responses of the materials.     

Uniqueness theorems in the theory of thermoelasticity for solids with double porosity

In this paper the coupled linear theory of thermoelasticity for solids with double porosity is considered. The governing system of field equations of this theory is based on motion equations, conservation of fluid mass, constitutive equations, extended Darcy’s law for materials with double porosity and Fourier’s law for heat conduction. A wide class of the basic internal and external boundary value problems (BVPs) of steady vibrations is formulated and uniqueness theorems for regular (classical) solutions of these BVPs are proved.     

Fractional order theory in thermoelastic solid with three-phase lag heat transfer

In this work, the field equations of the linear theory of thermoelasticity have been constructed in the context of a new consideration of Fourier law of heat conduction with time-fractional order and three-phase lag. A uniqueness and reciprocity theorems are proved. One-dimensional application for a half-space of elastic material in the presence of heat sources has been solved using Laplace transform and state space techniques Ezzat (Canad J Phys Rev 86:1241–1250, 2008). According to the numerical results and its graphs, conclusion about the new theory has been established.     

半无限长压电杆的瞬态热冲击问题

采用具有一个热松弛时间的L－S广义热弹性理论，研究了一维半无限长压电杆在一端受到热冲击时的边值问题。借助拉普拉斯正，反变换技术，在所考虑时间非常短的情况下，对问题进行了求解，得到了压电杆上的位移，压力及温度分布的近似解析解，发现应力及温度分布中分别存在两个阶跃点，并给出了算例。     

Uniaxial wave propagation in a nonlinear thermoviscoelastic medium with temperature dependent properties

The problem of finite wave propagation in a nonlinearly thermoviscoelastic thin rod whose viscoelastic properties are temperature dependent is considered. The rod is subjected to mechanical or thermal time-dependent loading. The coupled equations of motion and heat conduction are based on a constitutive theory of nonisothermal nonlinear viscoelasticity which is described by single-integral terms only. This theory is reformulated here for the uniaxial motion of a compressible rubbery material. The solution of the field equations is obtained by a numerical procedure which is developed for the present case and is able to handle successfully shock waves whenever they built up in the nonlinear material.     

Restudy of coupled field theories for micropolar continua (I)—Micropolar thermoelasticity

Problems of micropolar thermoelasticity have been presented and discussed by some authors in the traditional framework of micropolar continuum field theory. In this paper the theory of micropolar thermoelasticity is restudied. The reason why it was restricted to a linear one is analyzed. The rather general principle of virtual work and the new formulation for the virtual work of internal forces as well as the rather complete Hamilton principle in micropolar thermoelasticity are established. From this new Hamilton principle not only the equations of motion, the balance equation of entropy, the boundary conditions of stress, couple stress and heat, but also the boundary conditions of displacement, microrotation and temperature are simultaneously derived. Contributed by DAI Tian-min Foundation item: the National Natural Science Foundation of China (10072024); the International Cooperation Project of the NSFC (10011130235) and the DFG (51520001); the Research Foundation of Liaoning Education Committee (990111001) Biography: DAI Tian-min (1931-)     

Investigation on the influence of nonuniform initial temperature on the transient heat transfer measurement of film cooling

Numerical and experimental investigations on the influence of nonuniform initial temperature on the transient heat transfer measurements are presented in this paper. The case of film cooling is investigated. When the initial wall temperature is nonuniform, the results of heat transfer coefficient and film cooling effectiveness, which are calculated by the equations derived with constant initial temperature, could deviate from the true values badly, especially in the condition of short test duration. Using initial wall temperature which is higher than the real values causes the results of heat transfer coefficient and film cooling effectiveness lower than the true values. And lower initial wall temperature produces higher results of heat transfer coefficient and film cooling effectiveness. However, when the initial temperature distribution in the region where conduction plays more influence on the wall surface temperature than the convection is well fitted by the cubic polynomial, accurate results can be obtained by the new equation which is derived from 1-D unsteady conduction model with nonuniform initial wall temperature. Some suggestions are also introduced to reduce the influence of nonuniform initial temperature when the initial temperature distribution is difficult to obtain and the equation derived from constant initial temperature has to be employed.     

GUIDED THERMOELASTIC WAVE PROPAGATION IN LAYERED PLATES WITHOUT ENERGY DISSIPATION

In this paper, the propagation of guided thermoelastic waves in laminated orthotropic plates subjected to stress-free, isothermal boundary conditions is investigated in the context of the Green-Naghdi (GN) generalized thermoelastic theory (without energy dissipation). The coupled wave equations and heat conduction equation are solved by the Legendre orthogonal polynomial series expansion approach. The validity of the method is confirmed through a comparison. The dispersion curves of thermal modes and elastic modes are illustrated simultaneously. Dispersion curves of the corresponding pure elastic plate are also shown to analyze the influence of the thermoelasticity on elastic modes. The displacement and temperature distributions are shown to discuss the differences between the elastic modes and thermal modes.     

Thermoconductivity and thermoelasticity of thin isotropic shells heated by a moving heat pulse

The paper presents a solution to the problem of thermal conduction and thermoelasticity for a thin shallow spherical shell heated by a concentrated or local impulsive heat source moving over the shell surface. It is assumed that temperature is linearly distributed across the shell thickness and that the shell, on its sides, exchanges heat with the environment in accordance with Newton’s law of cooling. The Fourier and Laplace transforms are used to find an analytic solution. The dependence of the temperature field and stress/strain components on the type of heating and the form of heat source is studied __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 11, pp. 85–92, November 2006.     

功能梯度材料微梁的热弹性阻尼研究

基于Euler-Bernoulli梁理论和单向耦合的热传导理论,研究了功能梯度材料(functionally graded material,FGM)微梁的热弹性阻尼(thermoelastic damping,TED).假设矩形截面微梁的材料性质沿厚度方向按幂函数连续变化,忽略了温度梯度在轴向的变化,建立了单向耦合的变系数一维热传导方程.热力耦合的横向自由振动微分方程由经典梁理论获得.采用分层均匀化方法将变系数的热传导方程简化为一系列在各分层内定义的常系数微分方程,利用上下表面的绝热边界条件和界面处的连续性条件获得了微梁温度场的分层解析解.将温度场代入微梁的运动方程,获得了包含热弹性阻尼的复频率,进而求得了代表热弹性阻尼的逆品质因子.在给定金属-陶瓷功能梯度材料后,通过数值计算结果定量分析了材料梯度指数、频率阶数、几何尺寸以及边界条件对TED的影响.结果表明:(1)若梁长固定不变,梁厚度小于某个数值时,改变陶瓷材料体积分数可以使得TED取得最小值;(2)固有频率阶数对TED的最大值没有影响,但是频率阶数越高对应的临界厚度越小;(3)不同的边界条件对应的TED的最大值相同,但是随着支座约束刚度增大对应的临界厚度减小;(4)TED的最大值和对应的临界厚度随着金属组分的增大而增大.     

机械荷载与热荷载共同作用下变厚度梁的热弹性力学解

本文研究了两端简支变厚度梁受机械荷载与热荷载共同作用下的热弹性力学解.温度场用调和级数展开,通过求解热传导方程可首先确定温度沿梁厚度方向的非线性分布情况.从二维热弹性力学理论的基本方程出发,导出满足控制微分方程和两端简支边界条件的位移函数的一般解,对上下表面的边界方程作傅立叶正弦级数展开确定待定系数,数值结果与商业有限元软件ANSYS进行了比较,显示出很高的精度.本文方法可直接应用于对应力和位移分析要求较高的工程问题,如航空航天和微型机械的设计.