Synthesis and characterization of calcium complexes containing eta 2-pyrazolato ligands

Treatment of calcium bromide with 3,5-di-tert-butylpyrazolatopotassium (2 equiv) in tetrahydrofuran afforded Ca(tBu2pz)2(THF)2 (69%). The reaction of this compound with pyridine (3 equiv), tetramethylethylenediamine (TMEDA, 1 equiv), N,N,N',N',N"-pentamethyldiethylenetriamine (PMDETA, 1 equiv), triglyme (1 equiv), and tetraglyme (1 equiv) yielded Ca(tBu2pz)2(py)3 (51%), Ca(tBu2pz)2(TMEDA) (74%), Ca(tBu2pz)2(PMDETA) (50%), Ca(tBu2pz)2(triglyme) (73%), and Ca(tBu2pz)2(tetraglyme) (57%), respectively. Treatment of the tetrahydrofuran adduct of Ca(Me2pz)2, generated in situ, with PMDETA (1 equiv), triglyme (1 equiv), and tetraglyme (1 equiv) afforded Ca(Me2pz)2(PMDETA) (65%), Ca(Me2pz)2(triglyme) (54%), and Ca(Me2pz)2(tetraglyme) (40%), respectively. The X-ray crystal structures of Ca(tBu2pz)2(py)3, Ca(tBu2pz)2(TMEDA), Ca(tBu2pz)2(PMDETA), Ca(tBu2pz)2(triglyme), and Ca(Me2pz)2(PMDETA) revealed six-, seven-, or eight-coordinate calcium centers with eta 2-pyrazolato ligands. Ca(tBu2pz)2(triglyme) sublimes at 160 degrees C (0.1 mmHg). The potential utility of these complexes as source compounds for chemical vapor deposition processes is discussed.     

Weak carbon-hydrogen-nitrogen interactions affect the heterocyclic ligand bonding modes in barium complexes containing eta2-tetrazolato and eta2-pentazolato ligands

Treatment of Ba[N(SiMe3)2]2(THF)2 with 2 equiv of dimethylaminotetrazole or diisopropylaminotetrazole and 1 equiv of 18-crown-6 afforded Ba[CN4(NMe2)]2(18-crown-6) (87%) and Ba[CN4(NiPr2)]2(18-crown-6) (79%) as colorless crystalline solids. Ba[CN4(NMe2)]2(18-crown-6) contains two 1,2-eta2-tetrazolato ligands and one eta6-18-crown-6 ligand. The molecular structure of Ba[CN4(NiPr2)]2(18-crown-6) is similar to that of Ba[CN4(NMe2)]2(18-crown-6), except that the tetrazolato ligands exhibit the isomeric 2,3-eta2-coordination mode and the tetrazolato ligand CN4 cores are bent significantly toward the 18-crown-6 ligands. Molecular orbital calculations were carried out on the model complexes Ba(azolate)2(18-crown-6) (azolate = 1,2-eta2-CHN4, 2,3-eta2-CHN4, and eta2-N5) and demonstrate that the ligand coordination modes are influenced by intramolecular interactions between filled nitrogen orbitals on the azolato ligands and empty C-H sigma* orbitals on the 18-crown-6 ligands.     

Synthesis and characterization of cyclometalated iridium(III) complexes containing pyrimidine-based ligands

New pyrimidine derivatives (pyr) have been synthesized using palladium-catalyzed Suzuki coupling reaction. These compounds can undergo cyclometalation with iridium trichloride to form bis-cyclometalated iridium complexes, (pyr)₂Ir(acac) (acac = acetylacetonate; pyr = cyclometalated pyr). The substituents at the both cyclometalated phenyl ring and pyrimidine ring were found to affect both electrochemical and photophysical properties of the complexes. Computation results on these complexes are consistent with the electrochemical and photophysical data. The complexes are green-emitting with good solution quantum yields at ∼0.30. Light-emitting devices using these complexes as dopants were fabricated, and the device performance at 100 mA/cm² are moderate: 9 (17 481 cd/m², 4.8%, 18 cd/A, 5.1 lm/W); 10 (18 704 cd/m², 4.9%, 18.9 cd/A, 4.7 lm/W); 13 (20 942 cd/m², 5.4%, 21.0 cd/A, 6.1 lm/W).     

Synthesis, characterization, and electrochemistry of diruthenium(III,II) and monoruthenium(III) complexes containing pyridyl-substituted 2-anilinopyridinate ligands

Reaction of the metal-metal bonded complex Ru(2)(O2CCH3)4Cl with 2-anilino-4-methylpyridine leads to the (3,1) isomer of the diruthenium(III,II) complex Ru2(ap-4-Me)4Cl, 1 while the same reaction with 2-anilino-6-methylpyridine gives the monoruthenium(III) derivative Ru(ap-6-Me)3, 2. Both compounds were examined as to their structural, electrochemical, and UV-visible properties, and the data were then compared to that previously reported for (4,0) Ru2(2-Meap)4Cl and other (3,1) isomers of Ru2(L)4Cl with similar anionic bridging ligands. ESR spectroscopy indicates that the monoruthenium derivative 2 contains low-spin Ru(III), and the presence of a single ruthenium atom is confirmed by an X-ray structure of the compound. The combined electrochemical and UV-vis spectroelectrochemical data indicate that the diruthenium complex 1 is easily converted to its Ru2(4+) and Ru2(6+) forms upon reduction or oxidation by one electron while the monoruthenium derivative 2 also undergoes metal-centered redox processes to give Ru(II) and Ru(IV) complexes under the same solution conditions. The reactivity of 1 with CO and CN- was also examined.     

Synthesis, structural characterization, and properties of heavier alkaline earth complexes containing bis(pyrazolyl)borate or bis(3,5-diisopropylpyrazolyl)borate ligands

Treatment of a solid mixture of KBH₄ with six equivalents of 3,5-diisopropylpyrazole (iPr₂pzH) at 180 °C afforded KTp^iPr2(iPr₂PzH)₃ in 53% yield. KBp^iPr2 was synthesized in 56% yield by treatment of a 1:2 M ratio of KBH₄ and iPr₂PzH in refluxing dimethylacetamide. Treatment of MI₂ (M = Ca, Sr, Ba) with two equivalents of KBp or KBp^iPr2 in tetrahydrofuran afforded MBp₂(THF)₂ (M = Ca, 64%, M = Sr, 81%), BaBp₂(THF)₄ (32%), and M(Bp^iPr2)₂(THF)₂ (M = Ca, 63%; M = Sr, 61%, M = Ba, 48%) as colorless crystalline solids upon workup. These complexes were characterized by spectral and analytical techniques and by X-ray crystal structure determinations of all complexes except KBp^iPr2. KTp^iPr2(iPr₂PzH)₃ contains one κ³-N,N,N-Tp^iPr2 ligand and three κ¹-iPr₂pzH ligands, with overall distorted octahedral geometry about the K ion. The iPr₂PzH nitrogen-hydrogen bonds are engaged in intramolecular hydrogen bonding to the 2-nitrogen atoms of the Tp^iPr2 ligand. The solid state structures of MBp₂(THF)₂, BaBp₂(THF)₄, and M(Bp^iPr2)₂(THF)₂ contain κ³-N,N,H Bp and Bp^iPr2 ligands, which form through metal-nitrogen bond formation to the 2-nitrogen atoms of the pyrazolyl fragments and metal-hydrogen bond formation to one boron-bound hydrogen atom per Bp ligand. SrBp₂(THF)₂has the shortest metal-hydrogen interactions among the series. A combination of preparative sublimations, solid state decomposition temperatures, and thermogravimetric analysis demonstrated that MBp₂(THF)₂, BaBp₂(THF)₄, and M(Bp^iPr2)₂(THF)₂ undergo solid state decomposition at moderate temperatures.     

Synthesis,structural characterization and anticancer properties of p-cymene Ru(II) complexes with 2-(N-methyl-1H-1,2,4-triazol-3-yl)pyridines

Transition Metal Chemistry - The structures of new p-cymene Ru(II) complexes with 2-(1-methyl-1H-1,2,4-triazol-3-yl)pyridine and 2-(1-methyl-1H-1,2,4-triazol-5-yl)pyridine were established based on...     

Synthesis and structural characterization of 1,2,4-diazaphospholide complexes of titanium(IV) and titanium(III)

Two 1,2,4-diazaphospholide complexes of [Ti(η(2)-3,5-Ph(2)dp)(4)] and paramagnetic [Ti(η(2)-3,5-tBu(2)dp)(3)] were prepared by the reaction of tetrakis(dimethylamido)titanium(IV) with 3,5-diphenyl-1,2,4-diazaphophole, H[3,5-Ph(2)dp], or by the treatment of 3,5-tert-butyl-1,2,4-diazaphopholide potassium, K[3,5-tBu(2)dp], with titanium trichloride. Complexes can be viewed as the core of P(σ(2)λ(3))-functionalized metallodendrimers, in which the metal atoms are exclusively η(2)(N,N) bonding to the 1,2,4-diazaphospholides while P atoms (σ(2)λ(3)) with electron lone pairs are located on the periphery of the molecules.     

Synthesis,characterization, and catalytic properties of some new ruthenium(II)/(III) complexes containing N,N-donor ligands

This article describes the preparation and characterization of cis-[Ru(bipy)₂L](ClO₄)₂ and trans-[RuCl₂L₂]?·?Cl (bipy?=?2,2′-bipyridyl and L?=?ortho-phenylenediamine (o-phd), 2-aminopyridine (2-apy) and 2-aminobenzonitrile (2-abn), and examines the catalytic oxidations of benzyl alcohol, benzohydrol and pipronyl alcohol by cis-[Ru(bipy)₂ (o-phd)](ClO₄)₂ and trans-[RuCl₂(o-phd)₂]?·?Cl complexes at room temperature and in the presence of N-methyl morpholine-N-oxide (NMO) as co-oxidant.     

Synthesis and characterization of cobalt(III) tetraaza macrocyclic complexes containing chloro and azido ligands

The complexes [Co(L)Cl₂]Cl · 4H₂O (1) and [Co(L)(N₃)₂]N₃ · 2H₂O (2) (L = 3,14-dimethyl-2,6,13,17-tetraazatricyclo [14,4,0^1.18,0^7.12]docosane) have been synthesized, and structurally characterized by X-ray crystallography, spectroscopy and cyclic voltammetry. The crystal structure of (1) is centrosymmetric and the cobalt(III) atom has an axially elongated octahedral geometry with four nitrogen atoms of the macrocycle and two chloride ligands. The cobalt(III) ion in (2) is coordinated to four nitrogen atoms from the macrocycle, and two azide ligands in an octahedral environment, which forms the 1D polymer through hydrogen bonding contacts involving the cation, azide anion and solvent water molecules. Electronic spectra of the complexes also exhibit a low-spin octahedral environment. Cyclic voltammetry of the complexes undergoes a one-electron wave corresponding to Co(III)/Co(II) processes. The electronic spectra and electrochemical behaviors of the complexes are significantly affected by the nature of the axial ligands.     

Synthesis and structural characterization of tris (methacrylato)chromium(III)

A straightforward synthetic route to produce tris(methacrylato)chromium(III), Cr(O₂C(CH₃)C=CH₂)₃, by reacting sodium methacrylate with an aqueous solution of CrCl₃ gave a blue microcrystalline powder, insoluble in most common solvents. Electronic spectroscopy (UV-Vis), electron paramagnetic resonance (EPR), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS), were employed to characterize Cr(O₂C(CH₃)C=CH₂)₃. Morphology and elemental composition of this compound were determined using scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX), respectively. Spherical particles of approximately 2.5 µm in diameter were obtained. Thermal stability of the product was investigated via thermogravimetric analysis (TGA). The spectroscopic studies revealed that the coordination sphere around the chromium ion corresponds to a chelating bidentate carboxylate-Cr(III) complex. Thermal stability above 350°C, and spherical shape particles of few micrometers in diameter, suggest a potential application of this novel compound as a catalyst in oxidation reactions.     

Synthesis, structural characterization, and photophysical properties of palladium and platinum(II) complexes containing 7,8-benzoquinolinate and various phosphine ligands

A series of mononuclear cyclometalated benzo[h]quinolinate platinum and palladium(II) complexes with phosphine ligands, namely, [M(bzq)ClL] (L=PPh2H, Pt 1, Pd 2; PPh2CCPh, Pt 3, Pd 4), [Pt(bzq)(PPh2H)(PPh2CCPh)]ClO4 5, [Pt(bzq)(PPh2C(Ph)=C(H)PPh2)]ClO4 6, and [Pt(bzq)(CCPh)(PPh2CCPh)] (7a, 7b), were synthesized. The X-ray crystal structures of 1, 6.CH3COCH3.1/2CH3(CH2)4CH3, and 7b.CH3COCH3 have been determined. In 1, the metalated carbon atom and the P atom are mutually cis, whereas in 7b they are trans located. For complex 6, C and N are crystallographically indistinguishable. Reaction of [Pt(bzq)(mu-Cl)]2 with PPh2H and excess of NEt3 leads to the phosphide-bridge platinum dimer [Pt(bzq)(mu-PPh2)]2 8 (X-ray). Moderate pi-pi intermolecular interactions and no evident Pt-Pt interactions are found in 1, 7b, and in 8. All of the complexes exhibit absorption bands at high energy due to the intraligand transitions (1IL pi --> pi) and absorptions at lower energy which are attributed to MLCT (5d) pi --> pi (CLambdaN) transition. Platinum complexes show strong luminescence in both solid state and frozen solutions. The influence of the coligands on the photophysics of the platinum complexes has been examined by absorption and emission spectroscopy.     

Aluminum compounds containing eta1- and/or eta5-bidentate dianionic pyrrolyl-methylamide ligands

A series of dialuminum compounds have been synthesized and their reactivity and application for lactide polymerization have been studied. The reaction of AlH3 x NMe3 with [C4H3NH(2-CH2NHtBu)] in diethyl ether generated a dimeric aluminum hydride compound, [[[C4H3N(2-CH2NtBu)]AlH]2] (1). The structure of 1 was confirmed by spectroscopy of a deuterated analogue of 1 with an Al--D function. Direct treatment of [C4H3NH(2-CH2NHtBu)] with LiAlH4 in diethyl ether resulted in colorless crystals of [[Li[micro-eta1:eta5-C4H3N(2-CH2NtBu)]2Al]2] (2) in 80 % yield after recrystallization from a toluene solution. The micro-eta1:eta5-pyrrolyl protons exhibit high-field shifts at delta=5.73, 6.15, and 6.72 comparable to a similar eta5-bonding mode in the literature. Treatment of 1 with 1 equiv acetone oxime or acetone in dichloromethane gave [[[C4H3N(2-CH2NtBu)]Al[varkappaO,varkappaN-(ON==CMe2)]]2] (3) and [[[C4H3N(2-CH2NtBu)]Al(O--CHMe2)]2] (4) in 67 % and 60 % yield, respectively. Compounds 1-4 have been characterized by X-ray diffractometry and were used as catalysts for epsilon-caprolactone polymerization.     

Synthesis, structural characterization, and electrophosphorescent properties of rhenium(I) complexes containing carrier-transporting groups

Two novel diimine rhenium(I) carbonyl complexes with the formula [Re(CO)(3)(L)Br], where L = 1-(4-5'-phenyl-1,3,4-oxadiazolylbenzyl)-2-pyridinylbenzoimidazole (1) and 1-(4-carbazolylbutyl)-2-pyridinylbenzoimidazole (2), have been successfully synthesized and characterized by elemental analysis, (1)H NMR, and IR spectra. Their electrochemical, photophysical, and electroluminescent behaviors, along with the X-ray crystal structure analysis of 2, are also described. White electrophosphorescent devices were fabricated using 1 and 2 as emitters. The devices based on carbazole-containing (hole-transporting group) 2 with the structure ITO/m-MTDATA (30 nm)/NPB (20 nm)/2:CBP (8%, 30 nm)/Bphen (20 nm)/Alq(3) (20 nm)/LiF (0.8 nm)/Al (200 nm) exhibit Commission Internationale de L'Eclairage coordinates of x = 0.34, y = 0.33 with a maximum brightness of 2300 cd/m(2) at 580 mA/cm(2). When a brightness of 1500 cd/m(2) appears at 230 mA/cm(2), the devices based on 10 wt % 2 still possess 56% of the maximum efficiency which appeared at 2.7 mA/cm(2). These performances are among the best reported for devices using Re(I) complexes as emitters. By comparison of the electroluminescent properties of the devices based on 1 and 2, we conclude that the introduction of the carbazole group into the ligand improves the performance of 1-doped devices.     

Synthesis and structural characterization of manganese(III,IV) and ruthenium(III) complexes derived from 2-hydroxy-1-naphthaldehydebenzoylhydrazone

Reaction of 2-hydroxy-1-naphthaldehydebenzoylhydrazone(napbhH₂) with manganese(II) acetate tetrahydrate and manganese(III) acetate dihydrate in methanol followed by addition of methanolic KOH in molar ratio (2 : 1 : 10) results in [Mn(IV)(napbh)₂] and [Mn(III)(napbh)(OH)(H₂O)], respectively. Activated ruthenium(III) chloride reacts with napbhH₂ in methanolic medium yielding [Ru(III)(napbhH)Cl(H₂O)]Cl. Replacement of aquo ligand by heterocyclic nitrogen donor in this complex has been observed when the reaction is carried out in presence of pyridine(py), 3-picoline(3-pic) or 4-picoline(4-pic). The molar conductance values in DMF (N,N-dimethyl formamide) of these complexes suggest non-electrolytic and 1 : 1 electrolytic nature for manganese and ruthenium complexes, respectively. Magnetic moment values of manganese complexes suggest Mn(III) and Mn(IV), however, ruthenium complexes are paramagnetic with one unpaired electron suggesting Ru(III). Electronic spectral studies suggest six coordinate metal ions in these complexes. IR spectra reveal that napbhH₂ coordinates in enol-form and keto-form to manganese and ruthenium metal ions in its complexes, respectively. ESR studies of the complexes are also reported.     

Synthesis and characterization of cyclometalated iridium(III) complexes containing benzoxazole derivatives and different ancillary ligands

The synthesis, structures, electrochemistry, and photophysics of a series of cyclometalated iridium(III) complexes based on benzoxazole derivatives and different β-diketonate ligands are reported. These complexes have a general formula C^∧N₂Ir(LL′) [where C^∧N is a monoanionic cyclometalating ligand; 2-phenylbenzoxazolato (pbo), 2-(4-chlorophenyl)benzoxazolato (cpbo), 2-phenyl-5-chlorobenzoxazolato (pcbo), 2-(3,5-difluorophenyl)benzoxazole (fpbo), or 2-(2-naphthyl)benzoxazolato (nbo), and LL′ is an ancillary ligand; acetylacetonate (acac), dibenzoylmethanate (dbm), or 1,1,1,5,5,5-hexafluoroacetylacetonate (hfacac)]. The complexes (pcbo)₂Ir(acac) (3), (dfpbo)₂Ir(acac) (4), (cpbo)₂Ir(dbm) (7), (dfpbo)₂Ir(dbm) (8), and (dfpbo)₂Ir(hfacac) (9) have been structurally characterized by X-ray crystallography. All of the complexes show reversible oxidation between 0.45 and 1.07 V, versus Fc/Fc⁺, and have short luminescence lifetime (τ = 0.1-1.3 μs) at room temperature. Except complex 9, the radiative decay rate (k_r) and nonradiative decay rate (k_nr) of the (C^∧N)₂Ir(LL′) complexes have been determined by using the lifetime and quantum efficiency. The k_r ranges between 2.0 × 10³ and 3.0 × 10⁵ s⁻¹ and k_nr spans a narrower range of values (5.0 × 10⁵ to 7.0 × 10⁶ s⁻¹).     

Synthesis, reactivity, and structural characterization of sodium and ytterbium complexes containing new imidazolidine-bridged bis(phenolato) ligands

A new imidazolidine-bridged bis(phenol) [ONNO]H2 ([ONNO]H2=1,4-bis(2-hydroxy-3,5-di-tert-butyl-benzyl)imidazolidine) was prepared in relatively high yield by Mannish reaction of 2,4-di-tert-butylphenol, formaldehyde, and ethylenediamine in a 2:3:1 molar ratio. Reaction of the bis(phenol) with NaH in THF, after workup, afforded the sodium bis(phenolate) {[ONNO]Na2(THF)2}2.2THF (1) as a dimeric tetranuclear complex in an almost quantitative yield. Reaction of YbCl3 with complex 1 in a 2:1 molar ratio in THF, in the presence of HMPA, produced the desired bis(phenolate) ytterbium dichloride as bimetallic complex [ONNO]{YbCl2(HMPA)}2.2.5C7H8 (2). Complex 2 can be used as a precursor for the synthesis of ytterbium derivatives by salt metathesis reactions. Reaction of complex 2 with NaOiPr in a 1:2 molar ratio in THF led to the formation of bimetallic alkoxide [ONNO]{Yb(mu-OiPr)Cl(HMPA)}2.THF (3). However, the residual chlorine atoms in complex 3 are inactive for the further substituted reaction. Further study revealed that the bulkiness of the reagent has profound effect on the outcome of the reaction. Complex 2 reacted with bulky NaOAr (ArO=2,6-di-tert-butyl-4-methylphenoxo) or NaNPh2 in a 1:2 molar ratio under the same reaction conditions, after workup, to give the ligand redistributed products, (ArO)2YbCl(HMPA)2 (4) and [ONNO]YbCl(HMPA)2 (5) for the former and complexes 5 and (Ph2N)2YbCl(HMPA)2 (6) for the latter. If the molar ratio of complex 2 to NaNPh2 decreased to 1:4, the expected ligand redistributed products [ONNO]YbNPh2(HMPA) (7) and (Ph2N)3Yb(HMPA)2.C7H8 (8) can be isolated in high yields. All of the complexes were well characterized, and the definitive molecular structures of complexes 1-4, 7, and 8 were provided by single-crystal X-ray analysis.     

Synthesis and properties of some chromium(III) β-diketonate complexes

Summary Equimolar quantities of CrCl₃ · 3THF and-diketones, -dkH, react to yield CrCl₂(-dk) · 2THF and CrCl₂(-dk) · THF complexes in coordinating and noncoordinating solvents respectively. For 1 : 2 and 1 : 3 molar ratios of reactants, derivatives of general formulae CrCl(-dk)₂ and Cr(-dk)₃ (where-dkH = acerylacetrrnc, benzoylacetonc and dibenzoylmethane) have been isolated. All complexes have been characterized by elemental analysis, molecular weights and by i.r. spectra.     

Synthesis,spectral characterization,properties and structures of copper(I) complexes containing novel bidentate iminopyridine ligands

Four new ligands, (4-methyl-phenyl)-pyridin-2-ylmethylene-amine (A), (2,3-dimethyl-phenyl)-pyridin-2-ylmethylene-amine (B), (2,4-dimethyl-phenyl)-pyridin-2-ylmethylene-amine (C) and (2,5-dimethyl-phenyl)-pyridin-2-ylmethylene-amine (D), and their corresponding copper(I) complexes, [Cu(A)₂]ClO₄ (1a), [Cu(B)₂]ClO₄ (1b), [Cu(C)₂]ClO₄ (1c), [Cu(D)₂]ClO₄ (1d), [Cu(A)(PPh₃)₂]ClO₄ (2a), [Cu(B)(PPh₃)₂]ClO₄ (2b), [Cu(C)(PPh₃)₂]ClO₄ (2c) and [Cu(D)(PPh₃)₂]ClO₄ (2d), have been synthesized and characterized by CHN analyses, ¹H and ¹³C NMR, IR and UV–Vis spectroscopy. The crystal structures of [Cu(B)₂]ClO₄ (1b), [Cu(C)₂]ClO₄ (1c) and [Cu(A)(PPh₃)₂]ClO₄ · 1/2CH₃CN (2a) were determined from single crystal X-ray diffraction. The coordination polyhedron about the copper(I) center in the three complexes is best described as a distorted tetrahedron. A quasireversible redox behavior is observed for the complexes.     

Synthesis,physicochemical properties and voltammetric characterization of some new Fe(III) complexes with semicarbazone-based ligands

Several bis(ligand) octahedral complexes of iron(III) with salicylaldehyde semi-, thiosemi-, and S-methylthiosemi- carbazones have been synthesized and characterized by elemental analysis, conductivity and magnetic measurements, electronic and IR spectra, as well as by linear sweep and cyclic voltammetry. General procedures for the syntheses of all types of complexes have been established, giving better defined reaction conditions. Physicochemical properties of the novel complexes have been related to those of the already known compounds of the same type.