Identification of 3-chloro-1,2-propandiol using molecularly imprinted composite solid-phase extraction materials

A novel molecularly imprinted material based on silica microparticles was synthesized by surface polymerization with 3-chloro-1,2-propandiol (3-MCPD) as a template molecule. The molecularly imprinted polymer (MIP) was characterized by infrared spectroscopy and scanning electron microscopy. The adsorption of 3-MCPD by MIP was measured by gas chromatography with electron capture detection (GC-ECD) and an equilibrium binding experiment. Scatchard analysis revealed that the maximum apparent binding capacities of the MIP and non-imprinted polymer (NIP) were 67.64 and 23.31 μmol/g, respectively. The new adsorbent was successfully used in solid-phase extraction (SPE) to selectively enrich and determine 3-MCPD in soy sauce samples. The MIP-SPE column achieves recoveries higher than 92.7 % with a relative standard deviation of less than 1.83 %. The MIP-SPE-GC protocol improved the selectivity and eliminated the effects of template leakage on quantitative analysis and could be used for the determination of 3-MCPD in other complex food samples. Graphical Abstract

The MIP-SPE column developed by us achieves recoveries higher than 92.7 % with a relative standard deviation of less than 1.83 % for determining the 3-MCPD in the soy sauce matrix (mixed with 3-MCPD, 2-MPCD and 1,3-DCP).      

Coupled electrochemical-chemical procedure used in construction of molecularly imprinted polymer-based electrode: a highly sensitive impedimetric melamine sensor

A novel molecularly imprinted sensor was fabricated and used for the impedimetric detection of melamine. Considering the identity of polymeric film and the pK _a of a melamine template, an effective procedure was established to construct the MIP-based melamine sensor. The proposed method is based on the electropolymerization of pyrrole (Py) in the presence of melamine on the electrochemically reduced graphene oxide modified glassy carbon electrode (ERGO/GCE), followed by treatment with the solution of 1% H₂O₂ in alkaline water/CH₃CN-mixed solvents. The surface morphology and the electrical feature of molecularly imprinted polymer (MIP) were characterized by scanning electron microscopy (SEM), Fourier transformation infrared spectroscopy (FTIR), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The EIS was also utilized to transduce the change of charge transfer resistance (R _ct) at the interface of polymer film-electrolyte, after subsequent incubation of electrode in the solution containing different concentrations of analyte, and consequently, a linear response was obtained over the range of 4.0 to 240 nM with a detection limit of 0.83 nM (S/N = 3). The effect of possible interferences on the response of sensor was studied, and the results confirmed the good selectivity of the proposed device for melamine assay. The MIP sensor was successfully applied to determine melamine in a multiple concentration-spiked milk sample.     

Experimental and computational studies on molecularly imprinted solid-phase extraction for gonyautoxins 2,3 from dinoflagellate <Emphasis Type="Italic">Alexandrium minutum</Emphasis>

An innovative and effective extraction procedure based on molecularly imprinted solid-phase extraction (MISPE) was developed for the isolation of gonyautoxins 2,3 (GTX2,3) from Alexandrium minutum sample. Molecularly imprinted polymer microspheres were prepared by suspension polymerization and and were employed as sorbents for the solid-phase extraction of GTX2,3. An off-line MISPE protocol was optimized. Subsequently, the extract samples from A. minutum were analyzed. The results showed that the interference matrices in the extract were obviously cleaned up by MISPE procedures. This outcome enabled the direct extraction of GTX2,3 in A. minutum samples with extraction efficiency as high as 83 %, rather significantly, without any need for a cleanup step prior to the extraction. Furthermore, computational approach also provided direct evidences of the high selective isolation of GTX2,3 from the microalgal extracts.     

Chitosan-Based Surface Molecularly Imprinted Polymer Microspheres for Sustained Release of Sinomenine Hydrochloride in Aqueous Media

The surface molecular imprinting technique has been proposed as a prospective strategy for template molecule recognition and separation by devising the recognition sites on the surface of imprinted materials. The purpose of this study was to establish a novel drug delivery system which was developed by surface molecular imprinting method using β-cyclodextrin (β-CD)-grafted chitosan (CS) (CS-g-β-CD) microspheres as matrix and sinomenine hydrochloride (SM) as the template molecule. By adjusting the amount of functional monomer and cross-linking agent, we got the more excellent adsorption of CS-g-β-CD molecularly imprinted polymers (MIPs-CS-g-β-CD). When the amount of functional monomer was 6 mmol and cross-linking agent was 20 mmol, the maximum binding capacity of MIPs and non-imprinted polymers (NIPs) was 55.9 mg/g and 37.2 mg/g, respectively. The results indicated that the recognition of SM with MIPs was superior to NIPs. The adsorption isotherms of MIPs-CS-g-β-CD indicated that the adsorption behavior fitted better to the Langmuir model, which showed that the adsorption process of polymer was monomolecular layer. In in vitro drug release studies, the accumulative release amount of MIPs-CS-g-β-CD was up to 78% within 24 h. MIPs exhibited an excellent controlled SM release profile without burst release and the mechanism of SM release was shown to conform to non-Fick diffusion. Therefore, MIPs-CS-g-β-CD were successfully applied to extraction of SM and used as the materials for drug delivery system.     

Extraction of tributyltin by magnetic molecularly imprinted polymers

We have prepared core-shell magnetic molecularly imprinted polymer nanoparticles for recognition and extraction of tributyl tin (TBT). The use of particles strongly improves the imprinting effect and leads to fast adsorption kinetics and high adsorption capacities. The functional monomer acrylamide was grafted to the surface of Fe₃O₄ nanospheres in two steps, and MIP layers were then formed on the surface by creating a MIP layer on the surface consisting of poly(ethyleneglycol dimethacrylate) with a TBT template. The particles were characterized in terms of morphological, magnetic, adsorption, and recognition properties. We then have developed a method for the extraction of TBT from spiked mussel (Mytilidae), and its determination by liquid chromatography-tandem mass spectrometry. The method has a limit of detection of 1.0 ng?g^?1 (n?=?5) of TBT, with a linear response between 5.0 and 1,000 ng?g^?1. The proposed method was successfully applied to the determination of trace TBT in marine food samples with recoveries in the range of 78.3–95.6 %.

Polymer matrices with molecular memory as affine adsorbents for the determination of myoglobin as a cardiac marker of acute myocardial infarction by voltammetry

A possibility of myoglobin determination using screen-printed graphite electrodes modified with a poly(o-phenylenediamine)-based molecularly imprinted polymer (MIP) obtained by the electropolymerization of o-phenylenediamine monomer molecules on the surface of a screen-printed graphite electrode in the presence of myoglobin template molecules is considered. It is shown that the conjugation of MIP with multiwall carbon nanotubes (MWCNT) results in an increase in the sensitivity of the MIP-biosensor in the electrochemical determination of myoglobin by the direct registration of the reduction peak of hemoprotein Fe³⁺ by square wave voltammetry on screen-printed graphite electrodes modified with MWCNT/MIP and MIP. Equilibrium dissociation constants K _d for the interaction of myoglobin with MWCNT/MIP- and MIP-electrodes, which equaled (9.8 ± 2.6) × 10^–11 and (2.4 ± 0.5) × 10^–8 M, respectively, are calculated. It is shown that the sensitivity of the electrochemical MWCNT/MIP-biosensor for myoglobin determination (1.5 × 10^–2 A/nmol of myoglobin) is higher than that of the MIP-biosensor (2.0 × 10^–4 A/nmol of myoglobin).     

Preparation of MIP grafts for quercetin by tandem aryl diazonium surface chemistry and photopolymerization

The food antioxidant quercetin was used as a template in an ultrathin molecularly imprinted polymer (MIP) film prepared by photopolymerization. Indium tin oxide (ITO) plates were electrografted with aryl layers via a diazonium salt precursor bearing two terminal hydroxyethyl groups. The latter act as hydrogen donors for the photosensitizer isopropylthioxanthone and enabled the preparation of MIP grafts through radical photopolymerization of methacrylic acid (the functional monomer) and ethylene glycol dimethacrylate (the crosslinker) in the presence of quercetin (the template) on the ITO. The template was extracted, and the remaining ITO electrode used for the amperometric determination of quercetin at a working potential of 0.26 V (vs. SCE). The analytical range is from 5.10^?8 to 10^?4 mol L^?1, and the detection limit is 5.10^?8 mol L^?1.

Hydrophilic molecularly imprinted polymers for bisphenol A prepared in aqueous solution

We have prepared a hydrophilic molecularly imprinted polymer (MIP) for the hydrophobic compound bisphenol A (BPA) in aqueous solution using 3-acrylamido-N,N,N-trimethylpropan-1-aminium chloride (AMTC) as the functional monomer. Under redox-polymerization conditions, BPA forms an ion-pair with AMTC, which was confirmed by ¹H-NMR titration. The imprinting effect in aqueous solution was evaluated by comparison of this material with the corresponding non-imprinted polymer (NIP) and with a control polymer (CP) bearing no AMTC. The MIP showed the highest activity among the three polymers, and the imprinting factors as calculated from the amount of BPA bound to the MIP divided by the amounts bound to NIP and CP, respectively, are 1.8 and 6.0. The MIP was selective for BPA in aqueous solution, while structurally related compounds are not recognized. Such a selectivity for a hydrophobic compound is rarely observed in aqueous medium because non-specific binding of BPA inevitably leads to hydrophobic interaction.

Molecularly imprinted dispersive solid-phase microextraction for determination of sulfamethazine by capillary electrophoresis

We have developed a rapid, selective and efficient method for dispersive solid-phase microextraction (DSPME) using microbeads of a molecularly imprinted polymer (MIP). It enables the pre-concentration of sulfamethazine and sample clean-up prior to capillary electrophoresis with UV detection. The microbeads were synthesized via precipitation polymerization using sulfamethazine, methacrylic acid and ethylene glycol dimethacrylate (EGDMA) as the template molecule, the functional monomer and the cross-linking monomer, respectively. Characterization by SEM displayed the high uniformity and dispersibility of the MIP microbeads. The adsorption and desorption of sulfamethazine and the parameters for CE were optimized to result in a limit of detection of 1.1?μg?L^?1, which is 373-fold lower than that of direct CE detection. The equilibration time of extraction was reduced to 5?min, and the selectivity of the microbeads was significantly improved compared to the non-imprinted polymer. The method was successfully applied to the determination of trace sulfamethazine in several milk samples, with recoveries in the range of 89?% to 110?%.

Preparation of guanidinium terminus-molecularly imprinted polymers for selective recognition and solid-phase extraction (SPE) of [arginine]-microcystins

About 70 % of microcystin (MC) congeners reported in literature consist of l-arginine amino acid (R) with its guanidinium terminal extending out of the cyclic moiety of these MCs. Molecularly imprinted polymer (MIP) bearing guanidinium terminus cavities was successfully synthesised using l-arginine as a template. Non-imprinted polymer (NIP; without template) was also synthesised for control purposes. The surface area, total pore volume and average pore diameter of MIP and NIP were 267.13 m²/g, 0.63 cm³/g and 88.39 Å; 249.39 m²/g; 0.54 cm³/g and 87.14 Å, respectively. The polymers were investigated for selective recognition and extraction of [arginine]-MCs in water using solid-phase extraction/liquid chromatography-electrospray ionisation–mass spectrometry (SPE/LC-ESI-MS) method. Representative model standard solutions (0.5–10.0 μg/L) of MC-LR and MC-LY were spiked in distilled water, recovered by SPE and quantified by LC-ESI-MS. In this study, Oasis Waters? HLB cartridges served as positive control SPE sorbents. The MIP recognised MC-LR with high recoveries (70.8–91.4 %; r ² ?=?0.9962) comparable to HLB cartridges (71.0–91.85 %; r ² ?=?0.9993), whereas the NIP did not recognise or retain MC-LR. Also, neither MIP nor NIP recognised or retained MC-LY. Extracts of environmental toxic Microcystis aeruginosa were subjected to SPE procedure employing MIP, NIP and HLB cartridges. Microcystin-LR, -YR, -RR, -WR, -(H₄)YR and (D-Asp³, Dha⁷)MC-RR were extracted by MIP and HLB cartridges only as confirmed by LC-ESI-MS. This study demonstrated that the prepared MIP have potential applications for the removal in water and LC-ESI-MS identifications of MCs consisting the guanidinium moiety, i.e.[arginine]-MCs, and in particular targeting commonly encountered toxic congeners, MC-LR, -YR and -RR.

Chiral separation of racemic mandelic acids by use of an ionic liquid-mediated imprinted monolith with a metal ion as self-assembly pivot

A new chiral stationary phase based on molecularly imprinted polymers (MIP) was prepared in ionic liquid by use of the metal pivot concept. Imprinted monoliths were synthesized by use of a mixture of R-mandelic acid (template), 4-vinylpyridine, ethylene glycol dimethacrylate, and several metal ions as pivot between the template and functional monomer. A ternary mixture of dimethyl sulfoxide–dimethylformamide–[BMIM]BF₄ containing metal ions was used as the porogenic system. Separation of the enantiomers of rac-mandelic acid was successfully achieved on the MIP thus obtained, with resolution of 1.87, whereas no enantiomer separation was observed on the imprinted monolithic column in the absence of metal ions. The effects of polymerization conditions, including the nature of the metal ion and the ratios of template to metal ions and template to functional monomer, on the chiral separation of mandelic acid were investigated. The results reveal that use of metal ions as a pivot, in combination with ionic liquid, is an effective method for preparation of a highly efficient MIP stationary phase for chiral separation.

A molecularly imprinted polymer for solid phase extraction of allantoin

We describe a molecularly imprinted polymer (MIP) for the solid-phase extraction of the skin protectant allantoin. The MIP was deposited on the surface of monodisperse silica microspheres possessing acroyl groups on the surface (MH-SiO₂). The resulting MIP microspheres (MH-SiO₂@MIP) showed a 3.4-fold higher adsorption capacity and a 1.9-fold better selectivity for allantoin than the respective non-imprinted polymer (MH-SiO₂@NIP). The monolayer adsorption capacities of the MH-SiO₂@MIP and the MH-SiO₂@NIP were calculated with the help of the Langmuir model and found to be 6.8 and 1.9 mg?g^?1, respectively. Adsorption kinetics fit a pseudo-second order rate mechanism, with an initial adsorption rate of 1.44 for the MH-SiO₂@MIP, and of 0.07 mg?g^?1?min^?1 for the MH-SiO₂@NIP. The material can be regenerated, and its adsorption capacity for allantoin remains stable for at least five regeneration cycles. It was successfully used as a sorbent for the selective solid-phase extraction of allantoin from Rhizoma dioscoreae.

Determination of t,t-muconic acid in urine samples using a molecular imprinted polymer combined with simultaneous ethyl chloroformate derivatization and pre-concentration by dispersive liquid–liquid microextraction

The present communication describes the preparation and evaluation of a molecularly imprinted polymer (MIP) as a solid-phase extraction (SPE) sorbent and simultaneous ethyl chloroformate (ECF) derivatization and pre-concentration by dispersive liquid–liquid microextraction (DLLME) for the analysis of t,t-muconic acid (t,t-MA) in urine samples using gas chromatography–mass spectrometry. The imprinting polymer was prepared using methacrylic acid as a functional monomer, ethylene glycol dimethacrylate as a cross-linker, 2,2-azobisisobutyronitrile as the initiator and t,t-MA as a template molecule. The imprinted polymer was evaluated for its use as a SPE sorbent by comparing both imprinted and non-imprinted polymers in terms of the recovery of t,t-MA from urine samples. Molecular modelling studies were performed in order to estimate the binding energy and efficiency of the MIP complex formed between the monomer and the t,t-MA. Various factors that can affect the extraction efficiency of MIP, such as the loading, washing and eluting conditions, were optimized; other factors that can affect the derivatization and DLLME pre-concentration were also optimized. MIP in combination with ECF derivatization and DLLME pre-concentration for t,t-MA exhibits good linearity, ranging from 0.125 to 2 μg?mL^?1 (R ²?=?0.9971), with limit of detection of 0.037 μg?mL^?1 and limit of quantification of 0.109 μg?mL^?1. Intra- and inter-day precision was found to be <6 %. The proposed method has been proven to be effective and sensitive for the selective pre-concentration and determination of t,t-MA in urine samples of cigarette smokers.

Determination of sulfamethoxazole in milk using molecularly imprinted polymer monolith microextraction coupled to HPLC

We report on a new method for the selective extraction of the antibiotic sulfamethoxazole (SMO) in milk that is making use of a molecularly imprinted polymer (MIP) monolith as the sorbent. The monolith was synthesized in the tip of a micropipette using SMO as the template and a combination of acrylamide and 4-vinylpyridine as the co-functional monomers. The monolith was connected to syringes in different sizes and used for microextraction without any other treatment and showed high selectivity and enrichment ability for SMO. It was applied to the selective extraction and sensitive determination of SMO in milk. The linear range is from 5–600?μg?L^?1, the correlation coefficient (r²) is 0.9984, and the detection limit (at S/N?=?3) is 1?μg?L^?1. Recoveries range from 93.6 to 101.7?%, with relative standard deviations of <6.1?%.

Preparation of monodisperse curcumin-imprinted polymer by precipitation polymerization and its application for the extraction of curcuminoids from Curcuma longa L.

A monodisperse molecularly imprinted polymer (MIP) for curcumin was first prepared by precipitation polymerization using methacrylamide (MAM) and 4-vinylpyridine as functional co-monomers, divinylbenzene as a crosslinker, and a mixture of acetonitrile and toluene as a porogen. The use of MAM as the co-monomer resulted in the formation of a monodisperse MIP and non-imprinted polymer (NIP). MIP and NIP, respectively, were monodispersed with a narrow particle size distribution (3.3?±?0.09 and 3.5?±?0.10 μm). In addition to shape recognition, hydrophobic and hydrogen-bonding interactions affected the retention and molecular-recognition of curcumin on the MIP. The MIP for curcumin could extract curcuminoids (curcumin, demethoxycurcumin, and bisdemethoxycurcumin) in Curcuma longa L.

Development of a molecularly imprinted polymer-matrix solid-phase dispersion method for selective determination of β-estradiol as anabolic growth promoter in goat milk

A simple, fast, and sensitive method for determination of 17 β-estradiol (E2) in goat milk samples has been developed by combining selective molecularly imprinted matrix solid-phase dispersion (MIP–MSPD) and liquid chromatography with diode-array detection (DAD). The molecularly imprinted polymer was synthesized by use of 17β-estradiol as template molecule, methacrylic acid as functional monomer, ethylene glycol dimethacrylate as crosslinker monomer, azobisisobutyronitrile as initiator, and acetonitrile as porogen, and was used as selective solid support for matrix solid-phase dispersion. The selected dispersant had high affinity for E2 in the goat milk matrix and the extract obtained was sufficiently clean for direct injection for HPLC analysis without any interferences from the matrix. The proposed MIP–MSPD method was validated for linearity, precision, accuracy, decision limit (CCα) and detection capability (CCβ), in accordance with European Commission Decision 2002/657/EC criteria. Linearity ranged from 0.3–10 μg g^?1 (correlation coefficient r ²?>?0.999). Mean recovery of E2 from goat milk samples at different spiked levels was between 89.5 and 92.2%, with RSD values within 1.3–2%. CCα and CCβ values were 0.36 and 0.39 μg g^?1, respectively. The developed MIP–MSPD method was successfully applied to direct determination of E2 in goat milk samples.

Transport and physicochemical parameters of polypentenamer

Physicochemical properties of a cis-polypentenamer—a hydrocarbon polymer with a low glass transition temperature (T _g = 168.8 K)—have been studied. Measurements of permeability coefficients P in rubbery material for a wide range of gases (He, H₂, O₂, N₂, CO₂, CH₄, C₂H₆, C₃H₈, and n-C₄H₁₀) indicate a high permeability of this polymer for which the values of P are only slightly lower than those of the most permeable rubber—poly(dimethylsiloxane). The method of inverse gas chromatography has been employed to estimate solubility coefficients S for n alkanes C₃–C₁₀ and cycloalkanes in cis-polypentenamer in the range from 25 to 150°C. It has been shown that the solubility coefficients linearly increase in lnS-T _cr ² coordinates, where T _cr is the critical temperature of a solute. In terms of the above correlation, the solubility coefficients of light gases have been estimated and the diffusion coefficients D of gases in the same polymer have been calculated via the formula P=DS. The free volume in cis-polypentenamer has been studied by positron annihilation lifetime spectroscopy. The temperature dependence of the positronium lifetime τ ₃ that characterizes the size of the free volume element in a polymer demonstrates saturation at temperatures above 250 K. This effect is probably related to a rapid migration of fluctuation holes in the rubbery polymer at temperatures remote enough from its glass transition temperature.     

First example of a molecularly imprinted polymer incorporating a difunctionalized alloxazine flavin isomer

High-quality alloxazine (a flavin isomer) imprinted polymers have been made for the first time. A molecularly imprinted polymer (MIP) for the N1,N3-di-functionalized alloxazine template 2 was made. The MIP prepared for 2 exhibited excellent, highly selective molecular recognition for template 2, as determined by HPLC analysis using columns prepared with the MIP. This has also demonstrated that the core flavin structure can survive the imprinting process.     

Reaction of Imidazoles and Triazoles with 1-(Benzotriazol-1-yl)-2-iodoethanone

Reactions of 2-methyl-1H-imidazole, 1H-benzimidazole, 4H-1,2,4-triazole, and 1H-benzotriazole with 1-(1H-benzotriazol-1-yl)-2-iodoethan-1-one in the absence of a base gave the corresponding N-mono- and N,N′-disubstituted derivatives. 4H-1,2,4-Triazole-3-thiol reacted with 1-(1H-benzotriazol-1-yl)-2-iodoethan-1- one to afford 1-([1,3]thiazolo[2,3-c][1,2,4]triazol-5-yl)-1H-benzotriazolium triiodide.     

Regioselectivity of the thermal van Alphen–Hüttel rearrangement of 4- and 5-mono- and 4,5-disubstituted 3,3-diphenyl-3<Emphasis Type="Italic">H</Emphasis>-pyrazoles

Thermal van Alphen–Hüttel rearrangement of methyl 3,3-diphenyl-3H-pyrazole-4-carboxylate, 3,3-diphenyl-3H-pyrazole-4-carbonitrile, and methyl 5-methyl-3,3-diphenyl-3H-pyrazole-4-carboxylate involves completely regioselective migration of one phenyl group from the 3-position to N² with formation of aromatic 1H-pyrazole system. Thermal rearrangement of methyl 3,3-diphenyl-3H-pyrazole-5-carboxylate leads to the formation of methyl 4,5-diphenyl-1H-pyrazole-3-carboxylate as a result of migration of the 3-phenyl group exclusively to the C⁴ atom and subsequent prototropic isomerization. Under analogous conditions, methyl 4-methyl-3,3-diphenyl-3H-pyrazole-5-carboxylate, methyl 5-(methanesulfonyl)-3,3-diphenyl-3H-pyrazole-4-carboxylate, methyl 5-(benzenesulfonyl)-3,3-diphenyl-3H-pyrazole-4-carboxylate, and dimethyl 3,3-diphenyl-3H-pyrazole-4,5-dicarboxylate have been regioselectively converted into the corresponding 4H-pyrazoles. Thermolysis of 5-(4-methylbenzenesulfonyl)-3,3-diphenyl-3H-pyrazole-4-carbonitrile gives rise to a mixture of 1H- and 4H-pyrazoles, the former considerably prevailing, whereas the corresponding 1H-pyrazoles are formed as the only product from 5-(methanesulfonyl)- and 5-(benzenesulfonyl)-3,3-diphenyl-3H-pyrazole-4-carbonitriles.