Accurate heats of formation of the "Arduengo-type" carbene and various adducts including H2 from ab initio molecular orbital theory

The heats of formation of saturated and unsaturated diaminocarbenes (imadazol(in)-2-ylidenes) have been calculated by using high levels of ab initio electronic structure theory. The calculations were done at the coupled cluster level through noniterative triple excitations with augmented correlation consistent basis sets up through quadruple. In addition, four other corrections were applied to the frozen core atomization energies: (1) a zero point vibrational correction; (2) a core/valence correlation correction; (3) a scalar relativistic correction; (4) a first-order atomic spin-orbit correction. The value of DeltaHf( 298) for the unsaturated carbene 1 is calculated to be 56.4 kcal/mol. The value of DeltaHf( 298) for the unsaturated triplet carbene (3)1 is calculated to be 142.8 kcal/mol, giving a singlet-triplet splitting of 86.4 kcal/mol. Addition of a proton to 1 forms 3 with DeltaHf( 298)(3) = 171.6 kcal/mol with a proton affinity for 1 of 250.5 kcal/mol at 298 K. Addition of a hydrogen atom to 1 forms 4 with DeltaHf( 298)(4) = 72.7 kcal/mol and a C-H bond energy of 35.8 kcal/mol at 298 K. Addition of H- to 1 gives 5 with DeltaHf( 298)(5) = 81.2 kcal/mol and 5 is not stable with respect to loss of an electron to form 4. Addition of H2 to the carbene center forms 6 with DeltaHf( 298)(6) = 41.5 kcal/mol and a heat of hydrogenation at 298 K of -14.9 kcal/mol. The value of DeltaHf( 298) for the saturated carbene 7 (obtained by adding H2 to the C=C bond of 1) is 47.4 kcal/mol. Hydrogenation of 7 to form the fully saturated imidazolidine, 8, gives DeltaHf( 298)(8) = 14.8 kcal/mol and a heat of hydrogenation at 298 K of -32.6 kcal/mol. The estimated error bars for the calculated heats of formation are +/-1.0 kcal/mol.     

Thermochemical property estimation of hydrogenated silicon clusters

The thermochemical properties for selected hydrogenated silicon clusters (Si(x)H(y), x = 3-13, y = 0-18) were calculated using quantum chemical calculations and statistical thermodynamics. Standard enthalpy of formation at 298 K and standard entropy and constant pressure heat capacity at various temperatures, i.e., 298-6000 K, were calculated for 162 hydrogenated silicon clusters using G3//B3LYP. The hydrogenated silicon clusters contained ten to twenty fused Si-Si bonds, i.e., bonds participating in more than one three- to six-membered ring. The hydrogenated silicon clusters in this study involved different degrees of hydrogenation, i.e., the ratio of hydrogen to silicon atoms varied widely depending on the size of the cluster and/or degree of multifunctionality. A group additivity database composed of atom-centered groups and ring corrections, as well as bond-centered groups, was created to predict thermochemical properties most accurately. For the training set molecules, the average absolute deviation (AAD) comparing the G3//B3LYP values to the values obtained from the revised group additivity database for standard enthalpy of formation and entropy at 298 K and constant pressure heat capacity at 500, 1000, and 1500 K were 3.2%, 1.9%, 0.40%, 0.43%, and 0.53%, respectively. Sensitivity analysis of the revised group additivity parameter database revealed that the group parameters were able to predict the thermochemical properties of molecules that were not used in the training set within an AAD of 3.8% for standard enthalpy of formation at 298 K.     

Thermochemical properties, rotation barriers, and group additivity for unsaturated oxygenated hydrocarbons and radicals resulting from reaction of vinyl and phenyl radical systems with O2

Oxidation of unsaturated and aromatic hydrocarbons in atmospheric and combustion processes results in formation of linear and cyclic unsaturated, oxygenated-hydrocarbon intermediates. The thermochemical parameters delatafH degrees 298, S degrees 298, and C(p)(f298)(T) for these intermediates are needed to understand their stability and reaction paths in further oxidation. These properties are not available for a majority of these unsaturated oxy-hydrocarbons and their corresponding radicals, even via group additivity methods. Enthalpy, entropy, and heat capacity of a series of 40 oxygenated and non-oxygenated molecules, or radicals corresponding to hydrogen atom loss from the parent stable molecules are determined in this study. Enthalpy (delatafH degrees 298 in kcal mol(-1)) is derived from the density function calculations at the B3LYP/6-311g(d,p) calculated enthalpy of reaction (delatafH degrees rxn,298) and by use of isodesmic (work) reactions. Estimation of error in enthalpy delatafH degrees 298, from use of computational chemistry coupled with work reactions analysis, is presented using comparisons between the calculated and literature enthalpies of reaction. Entropies (S degrees 298) and heat capacities (C(p)(f298)(T)) were calculated using the B3LYP/6-311G(d,p) determined frequencies and geometries. Potential barriers for internal rotors in each molecule were determined and used (in place of torsion frequencies) to calculate contributions to S and C(p)(T) from the hindered rotors. Twenty-six groups for use in group additivity (GA) are also developed.     

Thermochemical properties and group values for nitrogen-containing molecules

Gas-phase thermochemical group additivity values were derived from CBS-QB3 computational chemistry calculations for 105 noncyclic C/H/O/N molecules. The molecules contain nitrile, nitro, nitroso, nitrite, nitrate, amine, imino, and azo functional groups. The enthalpy of formation, entropy, and heat capacity values for 49 atom-centered groups were derived. The effect of hindered internal rotations was included via rotor potential energy scans and solution of the one-dimensional Schrodinger equation. The average 95% confidence intervals across all derived groups are 1.4 kcal mol(-1) for the enthalpy, 1.3 cal mol(-1) K(-1) for the entropy, and 1.0 cal/mol K for the heat capacity. The presented group values will be useful when employing automatic reaction mechanism generation tools to examine the role of fuel-bound or molecular nitrogen in energy-related or atmospheric processes.     

Composition and thermochemistry of silver bromide vapor

The mole fractions of AgBr and Ag3Br3 in the saturated vapor at 840 K have been evaluated from the vapor mass spectrum, by comparison with the corresponding spectrum of AgCl vapor, where the monomer/trimer ratio is known accurately from vapor molecular weight measurements. Combination of these results with new measurements of the vapor pressure of molten AgBr by the torsion-effusion method in the range 805-936 K yielded the third law enthalpies of vaporization and the standard enthalpies of formation DeltafH degrees 298(AgBr, g) = 27.8 +/- 0.3 kcal mol(-1) and DeltafH degrees 298(Ag3Br3, g) = -19.0 +/- 1 kcal mol(-1). The dissociation energy, D degrees 0(AgBr), is found to be 66.4 +/- 0.3 kcal mol(-1), or 2.88 +/- 0.01 eV, some 3.5-5 kcal mol(-1) lower than previous literature values. Approximate thermochemical stabilities of the dimer species Ag2Cl2 and Ag2Br2 have also been evaluated.     

The correlation consistent composite approach (ccCA): an alternative to the Gaussian-n methods

An alternative to the Gaussian-n (G1, G2, and G3) composite methods of computing molecular energies is proposed and is named the "correlation consistent composite approach" (ccCA, ccCA-CBS-1, ccCA-CBS-2). This approach uses the correlation consistent polarized valence (cc-pVXZ) basis sets. The G2-1 test set of 48 enthalpies of formation (DeltaHf), 38 adiabatic ionization potentials (IPs), 25 adiabatic electron affinities (EAs), and 8 adiabatic proton affinities (PAs) are computed using this approach, as well as the DeltaHf values of 30 more systems. Equilibrium molecular geometries and vibrational frequencies are obtained using B3LYP density functional theory. When applying the ccCA-CBS method with the cc-pVXZ series of basis sets augmented with diffuse functions, mean absolute deviations within the G2-1 test set compared to experiment are 1.33 kcal mol(-1) for DeltaHf,0.81 kcal mol(-1) for IPs, 1.02 kcal mol(-1) for EAs, and 1.51 kcal mol(-1) for PAs, without including the "high-level correction" (HLC) contained in the original Gn methods. Whereas the HLC originated in the Gaussian-1 method as an isogyric correction, it evolved into a fitted parameter that minimized the error of the composite methods, eliminating its physical meaning. Recomputing the G1 and G3 enthalpies of formation without the HLC reveals a systematic trend where most DeltaHf values are significantly higher than experimental values. By extrapolating electronic energies to the complete basis set (CBS) limit and adding G3-like corrections for the core-valence and infinite-order electron correlation effects, ccCA-CBS-2 often underestimates the experimental DeltaHf, especially for larger systems. This is desired as inclusion of relativistic and atomic spin-orbit effects subsequently improves theoretical DeltaHf values to give a 0.81 kcal mol(-1) mean absolute deviation with ccCA-CBS-2. The ccCA-CBS method is a viable "black box" method that can be used on systems with at least 10-15 heavy atoms.     

Theoretical prediction of the heats of formation of C2H5O* radicals derived from ethanol and of the kinetics of beta-C-C scission in the ethoxy radical

Thermochemical parameters of three C(2)H(5)O* radicals derived from ethanol were reevaluated using coupled-cluster theory CCSD(T) calculations, with the aug-cc-pVnZ (n = D, T, Q) basis sets, that allow the CC energies to be extrapolated at the CBS limit. Theoretical results obtained for methanol and two CH(3)O* radicals were found to agree within +/-0.5 kcal/mol with the experiment values. A set of consistent values was determined for ethanol and its radicals: (a) heats of formation (298 K) DeltaHf(C(2)H(5)OH) = -56.4 +/- 0.8 kcal/mol (exptl: -56.21 +/- 0.12 kcal/mol), DeltaHf(CH(3)C*HOH) = -13.1 +/- 0.8 kcal/mol, DeltaHf(C*H(2)CH(2)OH) = -6.2 +/- 0.8 kcal/mol, and DeltaHf(CH(3)CH(2)O*) = -2.7 +/- 0.8 kcal/mol; (b) bond dissociation energies (BDEs) of ethanol (0 K) BDE(CH(3)CHOH-H) = 93.9 +/- 0.8 kcal/mol, BDE(CH(2)CH(2)OH-H) = 100.6 +/- 0.8 kcal/mol, and BDE(CH(3)CH(2)O-H) = 104.5 +/- 0.8 kcal/mol. The present results support the experimental ionization energies and electron affinities of the radicals, and appearance energy of (CH(3)CHOH+) cation. Beta-C-C bond scission in the ethoxy radical, CH(3)CH2O*, leading to the formation of C*H3 and CH(2)=O, is characterized by a C-C bond energy of 9.6 kcal/mol at 0 K, a zero-point-corrected energy barrier of E0++ = 17.2 kcal/mol, an activation energy of Ea = 18.0 kcal/mol and a high-pressure thermal rate coefficient of k(infinity)(298 K) = 3.9 s(-1), including a tunneling correction. The latter value is in excellent agreement with the value of 5.2 s(-1) from the most recent experimental kinetic data. Using RRKM theory, we obtain a general rate expression of k(T,p) = 1.26 x 10(9)p(0.793) exp(-15.5/RT) s(-1) in the temperature range (T) from 198 to 1998 K and pressure range (p) from 0.1 to 8360.1 Torr with N2 as the collision partners, where k(298 K, 760 Torr) = 2.7 s(-1), without tunneling and k = 3.2 s(-1) with the tunneling correction. Evidence is provided that heavy atom tunneling can play a role in the rate constant for beta-C-C bond scission in alkoxy radicals.     

Thermochemistry of the gaseous vanadium chlorides VCl, VCl2, VCl3, and VCl4

Gaseous equilibria in the V-Ag-Cl system were studied at elevated temperatures by effusion-beam mass spectrometry, where the pertinent species were generated by reaction of Cl 2(g) with V + Ag granules in the effusion cell source. Reaction enthalpies were derived from the equilibrium data, and the standard enthalpies of formation at 298 K of gaseous VCl, VCl2, and VCl3 were found to be +49.7, -34.8, and -85.6 kcal mol(-1), respectively. The corresponding bond dissociation energies at 298 K are D(V-Cl) = 102.9 kcal, D(ClV-Cl) = 113.5 kcal, D(Cl2V-Cl) = 79.8 kcal, and D(Cl3V-Cl) = 69.5 kcal. From these data, the dissociation energy D degrees 0(VCl) = 101.9 kcal mol(-1) or 4.42 eV is obtained. An alternate value, Delta(f)H(o)298(VCl 3,g) = -87.0 kcal mol (-1) was derived from third-law analysis of literature sublimation data for VCl3(s). In addition, literature thermochemical data on VCl4(g) were re-evaluated, leading to Delta(f)H(o)298 = -126.1 kcal mol (-1). The results are compared with various estimates in the literature.     

Enthalpy of the gas-phase CO2 + Mg reaction from ab initio total energies

Various highly accurate ab initio composite methods of Gaussian-n (G1, G2, G3), their variations (G2(MP2), G3(MP2), G3//B3LYP, G3(MP2)//B3LYP), and complete basis set (CBS-Q, CBS-Q//B3LYP) series of models were applied to compute reaction enthalpies of the ground-state reaction of CO2 with Mg. All model chemistries predict highly endothermic reactions, with DeltaH(298) = 63.6-69.7 kcal x mol(-1). The difference between the calculated reaction enthalpies and the experimental value, evaluated with recommended experimental standard enthalpies of formation for products and reactants, is more than 20 kcal x mol(-1) for all methods. This difference originates in the incorrect experimental enthalpy of formation of gaseous MgO given in thermochemical databases. When the theoretical formation enthalpy for MgO calculated by a particular method is used, the deviation is reduced to 1.3 kcal x mol(-1). The performance of the methodologies used to calculate the heat of this particular reaction and the enthalpy of formation of MgO are discussed.     

Reliable predictions of the thermochemistry of boron-nitrogen hydrogen storage compounds: BxNxHy, x = 2, 3

Thermochemical data calculated using ab initio molecular orbital theory are reported for 16 BxNxHy compounds with x = 2, 3 and y > or = 2x. Accurate gas-phase heats of formation were obtained using coupled cluster with single and double excitations and perturbative triples (CCSD(T)) valence electron calculations extrapolated to the complete basis set (CBS) limit with additional corrections including core/valence, scalar relativistic, and spin-orbit corrections to predict the atomization energies and scaled harmonic frequencies to correct for zero point and thermal energies and estimate entropies. Computationally cheaper calculations were also performed using the G3MP2 and G3B3 variants of the Gaussian 03 method, as well as density functional theory (DFT) using the B3LYP functional. The G3MP2 heats of formation are too positive by up to approximately 6 kcal/mol as compared with CCSD(T)/CBS values. The more expensive G3B3 method predicts heats of formation that are too negative as compared with the CCSD(T)/CBS values by up to 3-4 kcal/mol. DFT using the B3LYP functional and 6-311+G** basis set predict isodesmic reaction energies to within a few kcal/mol compared with the CCSD(T)/CBS method so isodesmic reactions involving BN compounds and the analogous hydrocarbons can be used to estimate heats of formation. Heats of formation of c-B3N3H12 and c-B3N3H6 are -95.5 and -115.5 kcal/mol at 298 K, respectively, using our best calculated CCSD(T)/CBS approach. The experimental value for c-B3N3H6 appears to be approximately 7 kcal/mol too negative. Enthalpies, entropies, and free energies are calculated for many dehydrocoupling and dehydrogenation reactions that convert BNH6 to alicyclic and cyclic oligomers and H2(g). Generally, the reactions are highly exothermic and exergonic as well because of the release of 1 or more equivalents of H2(g). For c-B3N3H12 and c-B3N3H6, available experimental data for sublimation and vaporization lead to estimates of their condensed phase 298 K heats of formation: DeltaHf degrees [c-B3N3H12(s)] = -124 kcal/mol and DeltaHf degrees [c-B3N3H6(l)] = -123 kcal/mol. The reaction thermochemistries for the dehydrocoupling of BNH6(s) to c-B3N3H12(s) and the dehydrogenation of c-B3N3H12(s) to c-B3N3H6(l) are much less exothermic compared with the gas-phase reactions due to intermolecular forces which decrease in the order BNH6 > cyclo-B3N3H12 > cyclo-B3N3H6. The condensed phase reaction free energies are less negative compared with the gas-phase reactions but are still too favorable for BNH6 to be regenerated from either c-B3N3H12 or c-B3N3H6 by just an overpressure of H2.     

Modeling the gas-phase thermochemistry of organosulfur compounds

Key to understanding the involvement of organosulfur compounds in a variety of radical chemistries, such as atmospheric chemistry, polymerization, pyrolysis, and so forth, is knowledge of their thermochemical properties. For organosulfur compounds and radicals, thermochemical data are, however, much less well documented than for hydrocarbons. The traditional recourse to the Benson group additivity method offers no solace since only a very limited number of group additivity values (GAVs) is available. In this work, CBS‐QB3 calculations augmented with 1D hindered rotor corrections for 122 organosulfur compounds and 45 organosulfur radicals were used to derive 93 Benson group additivity values, 18 ring‐strain corrections, 2 non‐nearest‐neighbor interactions, and 3 resonance corrections for standard enthalpies of formation, standard molar entropies, and heat capacities for organosulfur compounds and organosulfur radicals. The reported GAVs are consistent with previously reported GAVs for hydrocarbons and hydrocarbon radicals and include 77 contributions, among which 26 radical contributions, which, to the best of our knowledge, have not been reported before. The GAVs allow one to estimate the standard enthalpies of formation at 298 K, the standard entropies at 298 K, and standard heat capacities in the temperature range 300–1500 K for a large set of organosulfur compounds, that is, thiols, thioketons, polysulfides, alkylsulfides, thials, dithioates, and cyclic sulfur compounds. For a validation set of 26 organosulfur compounds, the mean absolute deviation between experimental and group additively modeled enthalpies of formation amounts to 1.9 kJ mol^?1. For an additional set of 14 organosulfur compounds, it was shown that the mean absolute deviations between calculated and group additively modeled standard entropies and heat capacities are restricted to 4 and 2 J mol^?1 K^?1, respectively. As an alternative to Benson GAVs, 26 new hydrogen‐bond increments are reported, which can also be useful for the prediction of radical thermochemistry.     

Heats of formation of boron hydride anions and dianions and their ammonium salts [BnHmy-][NH4+]y with y=1-2

Thermochemical parameters of the closo boron hydride BnHn2- dianions, with n=5-12, the B3H8- and B11H14- anions, and the B5H9 and B10H14 neutral species were predicted by high-level ab initio electronic structure calculations. Total atomization energies obtained from coupled-cluster CCSD(T)/complete basis set (CBS) extrapolated energies, plus additional corrections were used to predict the heats of formation of the simplest BnHmy- species in the gas phase in kcal/mol at 298 K: DeltaHf(B3H8-)=-23.1+/-1.0; DeltaHf(B5H52-)=119.4+/-1.5; DeltaHf(B6H62-)=64.1+/-1.5; and DeltaHf(B5H9)=24.1+/-1.5. The heats of formation of the larger species were evaluated by the G3 method from hydrogenation reactions (values at 298 K, in kcal/mol with estimated error bars of+/-3 kcal/mol): DeltaHf(B7H72-)=51.8; DeltaHf(B8H82-)=46.1; DeltaHf(B9H92-)=24.4; DeltaHf(B10H102-)=-12.5; DeltaHf(B11H112-)=-11.8; DeltaHf(B12H122-)=-86.3; DeltaHf(B11H14-)=-57.3; and DeltaHf(B10H14)=18.7. A linear correlation between atomization energies of the dianions and energies of the BH units was found. The heats of formation of the ammonium salts of the anions and dianions were predicted using lattice energies (UL) calculated from an empirical expression based on ionic volumes. The UL values (0 K) of the BnHn2- dianions range from 319 to 372 kcal/mol. The values of UL for the B3H8- and B11H14- anions are 113 and 135 kcal/mol, respectively. The calculated lattice energies and gas-phase heats of formation of the constituent ions were used to predict the heats of formation of the ammonium crystal salts [BnHmy-][NH4+]y. These results were used to evaluate the thermodynamics of the H2 release reactions from the ammonium hydro-borate salts.     

Thermochemical data and additivity group values for ten species of o-xylene low-temperature oxidation mechanism

o-Xylene could be a good candidate to represent the family of aromatic hydrocarbons in a surrogate fuel. This study uses computational chemistry to calculate standard enthalpies of formation at 298 K, Δ(f)H°(298 K), standard entropies at 298 K, S°(298 K), and standard heat capacities C(p)°(T) over the temperature range 300 K to 1500 K for ten target species present in the low-temperature oxidation mechanism of o-xylene: o-xylene (1), 2-methylbenzyl radical (2), 2-methylbenzylperoxy radical (3), 2-methylbenzyl hydroperoxide (4), 2-(hydroperoxymethyl)benzyl radical (5), 2-(hydroperoxymethyl)benzaldehyde (6), 1-ethyl-2-methylbenzene (7), 2,3-dimethylphenol (8), 2-hydroxybenzaldehyde (9), and 3-hydroxybenzaldehyde (10). Δ(f)H°(298 K) values are weighted averages across the values calculated using five isodesmic reactions and five composite calculation methods: CBS-QB3, G3B3, G3MP2, G3, and G4. The uncertainty in Δ(f)H°(298 K) is also evaluated. S°(298 K) and C(p)°(T) values are calculated at B3LYP/6-311G(d,p) level of theory from molecular properties and statistical thermodynamics through evaluation of translational, rotational, vibrational, and electronic partition functions. S°(298 K) and C(p)°(300 K) values are evaluated using the rigid-rotor-harmonic-oscillator model. C(p)°(T) values at T ≥ 400 K are calculated by treating separately internal rotation contributions and translational, external rotational, vibrational, and electronic contributions. The thermochemical properties of six target species are used to develop six new additivity groups taking into account the interaction between two substituents in ortho (ORT/CH2OOH/ME, ORT/ET/ME, ORT/CHO/OH, ORT/CHO/CH2OOH) or meta (MET/CHO/OH) positions, and the interaction between three substituents (ME/ME/OH123) located one beside the other (positions numbered 1, 2, 3) for two- or three-substituted benzenic species. Two other additivity groups are also developed using the thermochemical properties of benzenic species taken from the literature: the C/CB/H2/OO and the CB/CO groups. These groups extend the capacities of the group additivity method to deal with substituted benzenic species.     

An Extended Group Additivity Method for Polycyclic Thermochemistry Estimation

Automatic kinetic mechanism generation, virtual high‐throughput screening, and automatic transition state search are currently trending applications requiring exploration of a large molecule space. Large‐scale search requires fast and accurate estimation of molecules' properties of interest, such as thermochemistry. Existing approaches are not satisfactory for large polycyclic molecules: considering the number of molecules being screened, quantum chemistry (even cheap density functional theory methods) can be computationally expensive, and group additivity, though fast, is not sufficiently accurate. This paper provides a fast and moderately accurate alternative by proposing a polycyclic thermochemistry estimation method that extends the group additivity method with two additional algorithms: similarity match and bicyclic decomposition. It significantly reduces H_f(298 K) estimation error from over 60 kcal/mol (group additivity method) to around 5 kcal/mol, C_p(298 K) error from 9 to 1 cal/mol/K, and S(298 K) error from 70 to 7 cal/mol/K. This method also works well for heteroatomic polycyclics. A web application for estimating thermochemistry by this method is made available at http://rmg.mit.edu/molecule_search .     

Thermochemistry of methyl and ethyl nitro, RNO2, and nitrite, RONO, organic compounds

Computational quantum theory is employed to determine the thermochemical properties of n-alkyl nitro and nitrite compounds: methyl and ethyl nitrites, CH3ONO and C2H5ONO, plus nitromethane and nitroethane, CH3NO2 and C2H5NO2, at 298.15 K using multilevel G3, CBS-QB3, and CBS-APNO composite methods employing both atomization and isodesmic reaction analysis. Structures and enthalpies of the corresponding aci-tautomers are also determined. The enthalpies of formation for the most stable conformers of methyl and ethyl nitrites at 298 K are determined to be -15.64 +/- 0.10 kcal mol-1 (-65.44 +/- 0.42 kJ mol-1) and -23.58 +/- 0.12 kcal mol-1 (-98.32 +/- 0.58 kJ mol-1), respectively. DeltafHo(298 K) of nitroalkanes are correspondingly evaluated at -17.67 +/- 0.27 kcal mol-1 (-74.1 +/- 1.12 kJ mol-1) and -25.06 +/- 0.07 kcal mol-1 (-121.2 +/- 0.29 kJ mol-1) for CH3NO2 and C2H5NO2. Enthalpies of formation for the aci-tautomers are calculated as -3.45 +/- 0.44 kcal mol-1 (-14.43 +/- 0.11 kJ mol-1) for aci-nitromethane and -14.25 +/- 0.44 kcal mol-1 (-59.95 +/- 1.84 kJ mol-1) for the aci-nitroethane isomers, respectively. Data are evaluated against experimental and computational values in the literature with recommendations. A set of thermal correction parameters to atomic (H, C, N, O) enthalpies at 0 K is developed, to enable a direct calculation of species enthalpy of formation at 298.15 K, using atomization reaction and computation outputs.     

Thermochemistry of the hypobromous and hypochlorous acids, HOBr and HOCl

The enthalpies of formation of HOBr and HOCl have been estimated by employing coupled cluster theory in conjunction with the correlation consistent basis sets and corrections for core-valence, relativistic, and anharmonic effects. We have employed three different reactions to estimate the DeltaH(o)(f,298)(HOBr), namely, the atomization reaction and two homodesmic reactions. Our best estimation is DeltaH(o)(f,298) (HOBr) = -15.3 +/- 0.6 kcal/mol and is very likely to lie toward the more negative values. The present value is 1.4 kcal/mol lower than the widely used experimental determination of Ruscic and Berkowitz (J. Chem. Phys. 1994, 101, 7795), DeltaH(o)(f,298)(HOBr) > -13.93 +/- 0.42 kcal/mol. However, it is closer to the more recent measurement of Lock et al. (J. Phys. Chem. 1996, 100, 7972), DeltaH(o)(f,298)(HOBr) = -14.8 +/- 1 kcal/mol. In the case of HOCl we have determined DeltaH(o)(f,298)(HOCl) = -18.1 +/- 0.3 kcal/mol, just in the middle of the two experimental values proposed, -17.8 +/- 0.5 kcal/mol (JANAF), obtained from equilibrium constant measurements, and -18.36 +/- 0.03 kcal/mol (Joens, J. A. J. Phys. Chem. A 2001, 105, 11041), determined from the measurements of the Cl-OH bond energy. If our conclusions are correct, several enthalpies of formation that have been determined by experimental chemists, Orlando and Burholder (J. Phys. Chem. 1995, 99, 1143), and theoretical chemists, Lee (J. Phys. Chem. 1995, 99, 15074), need to be revised, since a larger value was used for DeltaH(o)(f,298)(HOBr). Employing the results obtained by Orlando and Burkholder for Br(2)O we propose DeltaH(o)(f,298)(Br(2)O) = 24.9 +/- 0.6 kcal/mol, and employing Lee's enthalpies of reaction we propose the following DeltaH(o)(f,298): for BrBrO, HBrO, ClOBr, ClBrO, BrClO, BrCN, BrNC, BrNO, BrON, FOBr, and FBrO, 39.5 +/- 1, 41.0 +/- 1, 22.7 +/- 1.5, 34.2 +/- 1.5, 40.9 +/- 1.5, 43.7 +/- 1.5, 80.1 +/- 1.5, 22.3 +/- 1, 46.2 +/- 1, 17.3 +/- 1.5, and 6.3 +/- 1.5 kcal/mol, respectively. We expect that this work will stimulate new experimental measurements of the thermodynamic properties of HOBr and HOCl.     

Modified calculations of hydrocarbon thermodynamic properties

A test set of 65 hydrocarbons was examined to elucidate theoretically their thermodynamic properties by performing the density-functional theory (DFT) and ab initio calculations. All the calculated data were modified using a three-parameter calibration equation and the least-squares approach, to determine accurately enthalpies of formation (DeltaH(f)), entropies (S), and heat capacities (C(p)). Calculation results demonstrated that the atomization energies of all compounds exhibited an average absolute relative error ranging between 0.11- 0.13%, and an DeltaH(f) of formation with a mean absolute absolute error (M.|A.E.|) ranging from only 5.7-6.8 kJ/mol (1.3-1.6 kcal/mol) (i.e., those results correlated with those of Dr. Herndon's 1.1 kcal/mol). Additionally, the entropy ranged from 3.5-4.2 J/mol K (0.8-1.0 cal/mol K) M.|A.E.|; a heat capacity between 2.3-2.9 J/mol K (0.5-0.7 cal/mol K) M.|A.E.| was obtained as well.     

The influence of substituent groups on the resonance stabilization of benzene. An ab initio computational study

Accurate G3(MP2) calculations of the enthalpies of formation (Delta(f)H298) of organic molecules permit replication and extension of calculations that were formerly dependent on experimental thermochemical results. A case in point is Kistiakowski's classical calculation of the total stabilization enthalpy of benzene relative to that of cyclohexene, called for many years the "resonance energy". This paper investigates extension of the classical calculation to substituted benzenes. Slight modification of the usual procedure for Delta(f)H298 determination permits exclusion of all empirical information, leaving a purely ab initio result. Stabilization enthalpies relative to the corresponding 4-substituted cyclohexenes are presented for benzene, toluene, aniline, phenol, phenylacetylene, styrene, ethylbenzene, and phenylhydrazine. In the process of calculating these stabilization enthalpies, we have also obtained 42 values of Delta(f)H298 for monosubstituted benzenes, cyclohexenes, and cyclohexanes, 24 of which are not in the standard reference literature. For the remaining 18 G3(MP2) results, the unsigned mean difference between calculated Delta(f)H298 values and experimental results is +/-0.91 kcal x mol(-1).     

Spectral and theoretical studies on effective and selective non-covalent interaction between tetrahexylporphyrins and fullerenes

The host-guest interaction of zinc(II) 5,10,15,20-tetrahexylporphyrin (Zn-THP) and its free base (H2-THP) with fullerenes (C60 and C70) has been studied in toluene medium. Binding constants (K) for H2- and Zn-THP complexes of fullerenes were determined by UV-vis, fluorescence and NMR spectroscopic techniques. Large K values of C70/THP complexes (KC70 ) were obtained in the range of 1.4-2.5 x 10(4)M(-1), while those of C60/THP complexes (KC60) were smaller (1.0-3.2 x10(3)M(-1)). These results show that the KC70 is about 10 times as large as KC60 in both THPs (KC70/KC60 = 10). Enthalpies of formation (DeltaHf degrees) for various fullerene/THP complexes were estimated by ab initio calculations; DeltaHf degrees for C60/H2-THP, C70/H2-THP, C60/Zn-THP and C70/Zn-THP complexes are 5.82, 2.80, 2.31 and 1.54 kcal mol(-1), respectively. The trends in DeltaHf degrees support the experimental results of selective complexation of THPs towards C70 over C60 and fullerenes towards Zn-THP over H2-THP.