含节理岩体爆生裂纹扩展的动焦散模型实验研究

应用动态焦散线测试系统,模拟含节理岩体断裂爆破过程,进行了PMMA模型透射式动态焦散线实验,着重研究了爆炸初始裂纹与节理面不同夹角的情况下,裂纹尖端动态应力强度因子的变化规律,裂纹穿过节理面的扩展规律,以及裂纹扩展速度的变化规律。实验结果分析表明,爆生裂纹穿过节理面时,裂纹尖端的动态应力强度因子和裂纹扩展速度显著下降,穿过节理面后,应力强度因子又有所增强;裂纹穿过节理面时,裂纹会沿节理面偏离一段距离后沿初始裂纹方向继续扩展。研究结果可以为节理岩体的断裂爆破提供理论依据。     

线性规律功能梯度材料断裂行为实验研究

焦散线方法与高速摄影技术结合,对线性规律功能梯度材料的I型静、动态断裂特性进行实验研究,并利用有限元软件进行数值模拟. 首先推导了线性规律功能梯度材料静、动态裂尖的焦散线初始曲线方程和参数方程,提出通过迭代方法根据功能梯度材料的复杂焦散线方程求解应力强度因子. 为对比材料梯度对断裂行为的影响,利用重力沉降法制备了3种梯度变化规律的试件. 然后对功能梯度材料试件进行三点弯曲实验,通过CCD和高速摄影装置采集试件焦散线图像,提取各种静、动态断裂参数. 最后通过与有限元模拟结果进行对比,证明在功能梯度材料断裂实验中焦散线方法的有效性,并详细分析了不同梯度变化规律对材料静、动态断裂性能的影响.      

不同耦合介质爆破裂纹动态扩展特性研究

不耦合装药结构能有效改善爆破效果。为探究不同耦合介质对爆破效果的影响，利用透射式数字激光焦散线实验系统，对有机玻璃板(polymethyl methacrylate, PMMA)试件开展水、空气、沙土3种耦合介质的不耦合爆破试验，研究不同耦合介质爆后裂纹形貌，计算裂纹分形维数，定量评价岩石破坏程度。分析裂纹扩展速度与动态应力强度因子变化规律，对比不同耦合介质下爆生裂纹的动态力学行为。结合数值模拟进行辅助分析，解释不同耦合介质对数值模拟中爆破损伤范围、孔壁压力时间曲线和岩石模型的总能量曲线的影响规律。结果表明：水耦合爆后裂纹分形维数最大，炮孔周围裂纹数量众多，主裂纹扩展长度最大，爆破效果最佳。沙土耦合爆破需要更多的能量使裂尖起裂，其动态应力强度因子最大。模拟得到的损伤云图与实验结果一致，水耦合损伤范围最大，空气耦合次之，沙土耦合损伤范围集中在炮孔周围。而孔壁压力时程曲线、能量时程曲线则验证爆破实验结果，表明水耦合爆破能更好地利用爆炸能量，提高试件的破坏效果。     

节理岩体爆生裂纹扩展动态焦散线模型实验研究

应用动态焦散线测试系统，模拟含节理岩体断裂爆破过程，进行了PMMA模型透射式动态焦散线实验，着重研究了爆炸初始裂纹与节理面夹角不同的情况下，裂纹尖端动态强度因子的变化规律、裂纹穿过节理面的扩展规律、以及炮孔与节理距离不同时裂纹穿过节理扩展的规律。实验结果分析表明，爆生裂纹穿过节理面时，裂纹尖端的动态强度因子和裂纹扩展速度显著下降，穿过节理面后，强度因子又增强；裂纹穿过节理面时，裂纹会沿节理面偏离一段距离后沿原方向继续扩展。实验结果还表明，炮孔与节理间距适宜的情况下，裂纹才会穿过节理继续扩展，间距太小和过大都不利于裂纹的扩展。     

爆炸载荷下板条边界斜裂纹的动态扩展行为

为了研究爆炸应力波作用下板条边界斜裂纹的动态扩展行为,首先分析了爆炸应力波在含边界斜裂纹板条中的传播,其次采用动态焦散线实验方法,进行了爆炸载荷下板条边界斜裂纹扩展规律的实验研究.研究结果表明,爆炸应力波作用下,板条试件边界斜裂纹的扩展过程中,裂纹扩展速度、扩展加速度和裂尖动态应力强度因子随时间波动变化,扩展速度最大值...     

缺陷介质切槽爆破断裂行为的动焦散线实验

利用数字激光动态焦散线实验系统,对含缺陷介质在切槽爆破和普通炮孔爆破中爆生裂纹的断裂行为进行对比研究。结果表明,切槽爆破中沿切槽方向起裂的主裂纹比非切槽方向早10 μs,有利于能量优先沿切槽方向释放;切槽方向主裂纹的起裂韧度为0.58 MN/m3/2,其裂纹扩展的平均速度为277 m/s,分别是普通爆破时主裂纹相应值的54%和86%;当切槽方向主裂纹与缺陷介质贯通后,为爆生气体提供了足够的膨胀空间,诱导爆生气体向预制裂纹两端释放,翼裂纹起裂以Ⅰ型拉伸破坏为主,并在裂纹扩展的60~250 μs内,Ⅰ型动态应力强度因子保持在0.6~0.8 MN/m3/2,形成了明显的平台,延缓了翼裂纹扩展速度的衰减,最终较普通炮孔翼裂纹扩展时间和扩展长度分别增加了22.7%和17.8%。     

爆炸应力波作用下裂纹与孔洞的动态焦散线分析

将高速摄影技术与动态焦散线方法相结合，研究了爆炸应力波对裂纹、空孔的作用历史，记录了环绕它们的动态焦散斑图，给出了爆炸应力场中裂纹尖端复合应力强度因子的时间依赖关系以及空孔周围应力场分布的瞬态变化过程，为固体介质的爆破机理研究提供了新方法。     

动静荷载对邻近巷道裂纹缺陷扰动的模拟实验

为了探究动静组合应力场作用下邻近巷道背爆侧裂纹缺陷的扩展规律,采用动静加载透射式动态焦散线方法进行了模拟实验,并结合裂纹尖端的动态应力强度因子和能量释放率进行了分析。实验结果表明:在动静荷载作用下,邻近巷道背爆侧裂纹缺陷处也成为巷道主要扰动区,且爆炸荷载对背爆侧预制裂纹的起裂起主导作用;p=0.2 MPa时的相同动静组合应力场中,背爆侧预制裂纹的扩展位移差异与裂纹的倾角有关,当θ=75°时,爆炸应力波无法驱动裂纹起裂;在相同爆炸荷载作用下,θ=30°时,较小竖向荷载对裂纹的扩展具有抑制作用,且抑制作用随所施加的竖向荷载增加而增大,当p=0.4 MPa时,裂纹无法起裂;裂纹最终扩展位移,与裂纹尖端动态应力强度因子在极大值上下振荡变化的持续时间,或在裂纹扩展阶段能量释放率积累量,呈正相关。     

确定裂纹尖端形状及张开位移的焦散线—伪焦散线法实验研究

本文根据反射式焦散线－伪焦散线法和弹塑性断裂力学的基本原理，推导出裂纹尖端形状方程，为测量裂纹尖端的张开位移，提供一种全新的实验方法，本文还引用实例来进行验证．     

定向断裂控制爆破的空孔效应实验分析

采用新型数字激光动态焦散线实验系统, 对爆炸荷载作用下空孔周围的动应力场分布及空孔对爆生主裂纹扩展行为的影响进行了研究。研究结果表明, 在空孔周围强应力场的影响下, 2条相向扩展的爆生主裂纹逐渐向空孔处偏转, 并在空孔处贯通; 空孔附近的主应力方向与炮孔连心线夹角基本稳定在约12°, 增大空孔尺寸对空孔附近的主应力方向影响不明显; 爆炸应力波与空孔相互作用, 产生反射拉伸波, 改变了主裂纹尖端的应力场, 降低了主裂纹的扩展速度, 且空孔直径越大, 主裂纹的扩展速度越低; 当爆生主裂纹扩展到空孔附近时, 主裂纹尖端动态应力强度因子再次出现上升的趋势。     

The 7th International Conference on Fluid Mechanics May 24-27,2015,Qingdao,China

正http://www.icfm7.org First Announcement and Call for PapersThe objective of International Conference on Fluid Mechanics(ICFM)is to provide a forum for researchers to exchange new ideas and recent advances in the fields of theoretical,experimental,computational Fluid Mechanics as well as interdisciplinary subjects.It was successfully convened by the Chinese Society of Theoretical and Applied Mechanics(CSTAM)in Beijing(1987,     

INFORMATION FOR CONTRIBUTORS

Contributions： The Journal, Acta Mechanica Solida Sinica, is pleased to receive papers from engineers and scientists working in various aspects of solid mechanics. All contributions are subject to critical review prior to acceptance and publication.     

Preface

This special issue of PARTICUOLOGY is devoted to the first UK-China Particle Technology Forum taking place in Leeds, UK, on 1-3 April 2007. The forum was initiated by a number of UK and Chinese leading academics and organised by the University of Leeds in collaboration with Chinese Society of Particuology, Particle Technology Subject Group （PTSG） of the Institution of Chemical Engineers （IChemE）, Particle Characterisation Interest Group （PCIG） of the Royal Society of Chemistry （RSC） and International Fine Particle Research Institute （IFPRI）. The forum was supported financially by the Engineering and Physics Sciences Research Council （EPSRC） of United Kingdom,     

基于鲁棒滤波的捷联导引头视线角速度估计方法

针对捷联导引头无法直接获取视线角速度等信息的问题,研究了鲁棒滤波在大气层外飞行器捷联导引头视线角速度估计中的应用。为了建立非线性滤波估计模型,考虑目标视线角速度的慢变特性,采用一阶马尔科夫模型建立了状态方程;推导了视线角速度的解耦模型,并建立了量测方程;考虑到实际应用中存在系统噪声统计特性失准的问题,基于Huber-Based鲁棒滤波方法,设计了视线角速度滤波器,并完成了基于Huber-Based滤波方法和扩展卡尔曼滤波方法的数学仿真。仿真结果表明Huber-Based滤波方法的视线角、视线角速度及视线角加速度估计精度分别达到0.1140'、0.1423'/s、0.0203'/s2,而扩展卡尔曼滤波方法的视线角、视线角速度及视线角加速度估计精度仅分别为0.6577'、0.6415'/s、0.0979'/s~2。仿真结果证明了该方法可以有效地估计出相对视线角速度等信息,并且在非高斯噪声的条件下,依然可获得较高的估计精度,具有一定的鲁棒性。     

Guide for authors

正Each of the sections below provides essential information for authors.We recommend that you take the time to read them before submitting a contribution to Acta Mechanica Sinica.We hope our guide to authors may help you navigate to the appropriate section.How to prepare a submission This document provides an outline of the editorial process involved in publishing a scientific paper in Acta Mechanica     

Use specification of multiscale materials for life spanned over macro-, micro-, nano-, and pico-scale

Multiscale material intends to enhance the strength and life of mechanical systems by matching the transmitted spatiotemporal energy distribution to the constituents at the different scale, say—macro, micro, nano, and pico,—, depending on the needs. Lower scale entities are, particularly, critical to small size systems. Large structures are less sensitive to microscopic effects. Scale shifting laws will be developed for relating test data from nano-, micro-, and macro-specimens. The benefit of reinforcement at the lower scale constituents needs to be justified at the macroscopic scale. Filling the void and space in regions of high energy density is considered.Material inhomogeneity interacts with specimen size. Their combined effect is non-equilibrium. Energy exchange between the environment and specimen becomes increasingly more significant as the specimen size is reduced. Perturbation of the operational conditions can further aggravate the situation. Scale transitional functions and/or f_j/j+1 are introduced to quantify these characteristics. They are represented, respectively, by , and (f_mi/ma,f_na/mi,f_pi/na). The abbreviations pi, na, mi, and ma refer to pico, nano, micro and macro.Local damage is assumed to initiate at a small scale, grows to a larger scale, and terminate at an even larger scale. The mechanism of energy absorption and dissipation will be introduced to develop a consistent book keeping system. Compaction of mass density for constituents of size 10⁻¹², 10⁻⁹, 10⁻⁶, 10⁻³ m, will be considered. Energy dissipation at all scales must be accounted for. Dissipations at the smaller scale must not only be included but they must abide by the same physical and mathematical interpretation, in order to avoid inconsistencies when making connections with those at the larger scale where dissipations are eminent.Three fundamental Problems I, II, and III are stated. They correspond to the commonly used service conditions. Reference is made to a Representative Tip (RT), the location where energy absorption and dissipation takes place. The RT can be a crack tip or a particle. At the larger size scales, RT can refer to a region. Scale shifting of results from the very small to the very large is needed to identify the benefit of using multiscale materials.