Synthesis,characterization and antimalarial activity of new iridium–chloroquine complexes

Chloroquine base (CQ) reacts with [Ir(COD)Cl]₂ and IrCl₃ · 3H₂O to yield of Ir(CQ)Cl(COD) (1) and Ir₂Cl₆(CQ) · 3H₂O (2), respectively. Reaction of [Ir(COD)Cl]₂ with CQ in the presence of NH₄PF₆ leaded to [Ir(CQ)(Solv)₂]PF₆ (3). The three new iridium–CQ complexes were characterized by a combination of elemental analysis, IR and NMR spectroscopies and evaluated in vitro against Plasmodium beghei. Comparison of the IC₅₀ values obtained with the experimental compounds with that determined for chloroquine diphosphate indicated a higher activity for complex 2, while complexes 1 and 3 showed a similar and lower activity, respectively.     

Comparison of Ta–MCM-41 and Ti–MCM-41 as catalysts for the enantioselective epoxidation of styrene with TBHP

Chiral Ti–MCM-41 and Ta–MCM-41 catalysts have been prepared by grafting of Ti(OⁱPr)₄ and Ta(OEt)₅ and the modification with R-(+)-diethyl l-tartrate or R-(+)-diisopropyl l-tartrate. In general, the solid catalysts are more active and selective than their homogeneous counterparts in the epoxidation of styrene with tert-butyl hydroperoxide. The enantioselectivities depend on both the nature of the chiral ligand and the calcination temperature of the support, as it is supposed this controls the type of surface species that are formed. The best result of 71% ee is obtained with DIPT–Ta–MCM₅₅₀ and is the first example of the use of a Ta catalyst for the enantioselective epoxidation of unfunctionalized alkenes. Nonetheless, the recovered Ta catalysts are less active and selective.     

Preparation, characterization and pharmacodynamic activity of supramolecular and colloidal systems of rosuvastatin–cyclodextrin complexes

In the present study influence of nature of selected cyclodextrins (CDs) and of methods of preparation of drug–CD complexes on the oral bioavailability, in vitro dissolution studies and pharmacodynamic activity of a sparingly water soluble drug rosuvastatin (RVS) was investigated. Phase solubility studies were conducted to find the interaction of RVS with β-CD and its derivatives, which indicated the formation of 1:1 stoichiometric inclusion complex. The apparent stability constant (K_1:1) calculated from phase solubility diagram were in the rank order of β-CD < hydroxypropyl-β-cyclodextrin (HP-β-CD) < randomly methylated-β-cyclodextrin (RM-β-CD). Equimolar drug–CD solid complexes prepared by different methods were characterized by the Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and X-ray diffractometry (XRD). FTIR study demonstrated the presence of intermolecular hydrogen bonds and ordering of the molecule between RVS and CDs in inclusion complexes. DSC and XRD analysis confirmed formation of inclusion complex by freeze dried method with HP-β-CD and RM-β-CD. Aqueous solubility and dissolution studies indicated improved dissolution rates of prepared complexes in comparison with drug alone. Moreover, CD complexes demonstrated of significant improvement in reducing total cholesterol and triglycerides levels as compared to pure drug. However the in vivo results only partially agreed with those obtained from phase solubility studies.     

Synthesis and characterization of Sibunit-supported Pd–Ga,Pd–Zn,and Pd–Ag catalysts for liquid-phase acetylene hydrogenation

Pd/Sibunit and Pd–M/Sibunit (M = Ga, Zn, or Ag) catalysts have been synthesized, and their catalytic properties in liquid-phase acetylene hydrogenation have been investigated. Doping of the palladium catalyst with a metal M leads to the formation of the Pd₂Ga, PdZn, or Pd_0.46Ag_0.54 bimetallic compound. The bimetallic particles are much smaller (1.6–2.0 nm) than the monometallic palladium particles (4.0 nm). Doping with zinc raises the ethylene selectivity by 25% without affecting the activity of the catalyst. Specific features of the effect of each of the dopants on palladium are reported.     

Preparation and characterization of Ru?Pb supported catalysts

Decomposition of Mn₃Mo₂TeO₁₂ during oxidation of toluene to benzaldehyde was observed. Depending on the surface composition of the initial catalyst, the decomposition leads to less active but highly selective MnMoTeO₆ or to MnMoO₄ which is not selective in toluene oxidation.

---

Mn₃Mo₂TeO₁₂ . , MnMoTeO₆, MnMoO₆.

     

Preparation,characterization and activity evaluation of p–n junction photocatalyst p-NiO/n-ZnO

In this paper, p–n junction photocatalyst NiO/ZnO was prepared by the sol–gel method using Ni (NO₃)₂ and zinc acetate as the raw materials. The structural and optical properties of the p–n junction photocatalyst NiO/ZnO were characterized by X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) analysis, UV–Vis diffuse reflection spectrum (DRS) and the fluorescence emission spectra. The photocatalytic activity of the photocatalyst was evaluated by photocatalytic reduction of Cr₂O₇ ²⁻ and photocatalytic oxidation of methyl orange (MO). The results showed that the photocatalytic activity of the p–n junction photocatalyst NiO/ZnO is much higher than that of ZnO on the photocatalytic reduction of Cr₂O₇ ²⁻. However, the photocatalytic activity of the photocatalyst is much lower than that of ZnO on the photocatalytic oxidation of methyl orange. Namely, the p–n junction photocatalyst NiO/ZnO has higher photocatalytic reduction activity, but lower photocatalytic oxidation activity. The heat treatment condition also influences the photocatalytic activity strongly, and the best preparation condition is about 400 °C for 2 h. Effect of the heat treatment condition on the photocatalytic activity of the photocatalyst was also investigated. The mechanisms of influence on the photocatalytic activity were discussed by the p–n junction principle.     

Sol–gel synthesis,characterization and catalytic activity of mesoporous γ-alumina prepared from boehmite sol by different methods

In this study, boehmite sols were used as alumina precursors for preparing mesoporous γ-aluminas by two different methods. In one case polyethylenimine was used as a structure-directing agent, and in another case ultrasound treatment was applied. Nitrogen physisorption showed that aluminas that had been prepared by these methods demonstrated different porous structures. The sample obtained without additional treatment had closely packed spherical particles and pores had ink-bottle neck morphology. Ultrasound treatment led to the transformation of ink-bottle pores into cylindrical form and to the increase in surface area and pore volume. Aluminas prepared using polyethylenimine as a template showed larger cylindrical wormhole-like mesopores with a broader pore size distribution, high surface area and pore volume. Catalytic tests showed that textural properties as well as crystallite size were very important parameters of synthesized samples which affected the catalytic activity in the methanol dehydration reaction. It was found that γ-Al₂O₃ prepared by ultrasound treatment had large crystallite size and demonstrated high catalytic activity.     

Preparation and Sensitivity of SnO2 Grafted MCM-41 Sensor

Tin dioxide is one of the most widely used semiconductor gas sensor to detect reducing gases1-3. The sensing mechanism of SnO2 is usually based on the change of the resistance of the sensor in different gas environment. In air, the surface-adsorbed oxygen species on the surface of SnO2 act as surface acceptors of electrons, hence diminishing the conductivity of SnO2. However, when reducing gases such as H2, CO, or CH4 are introduced in the air stream, the resistance of the SnO2 sensor is …     

Preparation of ecological catalysts derived from Zn hyperaccumulating plants and their catalytic activity in Diels–Alder reaction

Zn hyperaccumulating plants Noccaea caerulescens and Anthyllis vulneraria were used as the starting material for preparation of novel Lewis ecological catalysts. Those catalysts efficiently mediate the Diels–Alder reaction. High yields, very good regio- and diastereoselectivity, low catalyst loading and the possibly of its recovery and reuse, along with mild reaction conditions, eco-friendly treatment and short reaction time, are the key advantages of the presented approach.     

Preparation, characterization and catalytic activity of Bi−Mo-based catalysts for the oxidative dehydrogenation ofn-butene to 1,3-butadiene

Multicomponent bismuth molybdates were prepared by a co-precipitation method for use in the oxidative dehydrogenation ofn-butene to 1,3-butadiene. The effect of divalent and trivalent metals on the catalytic performance of multicomponent bismuth molybdate catalysts was investigated. It was found that the metal ratio of Fe/Bi/Mo=3∶1∶12 was favorable for the reaction. The successful formation of Ni _X Co_8?X Fe₃Bi₁Mo₁₂O₅₀ (X=0?8) catalysts was well confirmed by XRD and ICP-AES measurements. The multicomponent bismuth molybdate catalysts showed a better catalytic performance than the pure γ-Bi₂MoO₆ catalyst. Among the Ni _X Co_8?X Fe₃Bi₁Mo₁₂O₅₀ (X=0?8) catalysts, Ni₃Co₅Fe₃Bi₁Mo₁₂O₅₀ showed the highest yield of 1,3-butadiene.     

Preparation and characterization of acrylic polymer–nanogold nanocomposites from 3-mercaptopropyltrimethoxysilane encapsulated gold nanoparticles

In this study, acrylic polymer–nanogold nanocomposites and their cast films were prepared from an acrylic copolymer and 3-mercaptopropyltrimethoxysilane (MPS) stabilized gold nanoparticles by a sol–gel reaction. The acrylic copolymer was synthesized from methyl methacrylate (MMA) and 3-(trimethoxysilyl)propyl methacrylate (MSMA). The Si–OMe groups of MPS on the surface of gold nanoparticles (MPS–Au) provided the further reaction with the same groups of MSMA, hence the covalent bonds between polymers and MPS–Au nanoparticles were formed. FE-SEM images show MPS–Au nanoparticles are dispersed well in the prepared nanocomposites, and no large aggregation is occurred. TGA results indicate that the decomposed temperatures (T_d) of low Au-content (0.1 wt.%) nanocomposites are higher than these of the acrylic copolymer and high Au-content (1.0 wt.%) nanocomposites. The temperature of maximum decomposed rate (T_p) of each prepared nanocomposite is higher than that of the acrylic copolymer. The hardness of the cast film increases with increasing the Au content. The results show the improved thermal stability and application potentials of the prepared acrylic polymer–nanogold nanocomposites.     

Preparation, characterization, and catalysis of mecro-catalysts

Because catalysis by metals is a surface phenomenon, many technological catalysts contain small (typically nanometre-sired) supported metal particles with a large fraction of the atoms exposed. Many reactions, such as hydrocarbon hydrogenations, are structure-insensitive, proceeding at approximately the same rates on metal particles of various sizes provided that they are larger than 1 nm and show bulk-like metallic behavior. But the catalytic properties are not known when metal particles become so small that their sizes are indium clusters consisting of several indium atoms. Here the catalytic behavior of precisely defined clusters of just four and six indium atoms on solid supports is shown. It is found that the Ir4 and Ir6 clusters differ in catalytic activity both from each other and from metallic Ir particles.     

Preparation and characterization of polyacrylamide–silver nanocomposites

Polyacrylamide–silver nanocomposites are successfully prepared by irradiating the aqueous solution of AgNO₃ and acrylamide monomer with ⁶⁰Co γ-ray. The composites are found to contain nanometer silver particles with a narrow size distribution and a homogeneous dispersion. The existing of isopropanol (as a hydroxyl radical scavenger and chain transfer agent) in system affects the properties of both the dispersed phase and matrix of the nanocomposites. The fast-formed polymer chains probably play a key role in preventing the aggregation of silver particles which are reduced later.     

Synthesis,characterization and electrocatalytic activity for ethanol oxidation of carbon supported Pt,Pt–Rh,Pt–SnO2 and Pt–Rh–SnO2 nanoclusters

Nanoclusters of Pt, Pt–Rh, Pt–SnO₂ and Pt–Rh–SnO₂ were successfully synthesized by polyol method and deposited on high-area carbon. HRTEM and XRD analysis revealed two phases in the ternary Pt–Rh–SnO₂/C catalyst: solid solution of Rh in Pt and SnO₂. The activity of Pt–Rh–SnO₂/C for ethanol oxidation was found to be much higher than Pt/C and Pt–Rh/C and also superior to Pt–SnO₂/C. Quasi steady-state measurements at various temperatures (30–60 °C), ethanol concentrations (0.01–1 M) and H₂SO₄ concentrations (0.02–0.5 M) showed that Pt–Rh–SnO₂/C is about 20 times more active than Pt/C in the potential range of interest for the fuel cell application.     

Preparation and characterization of W/γ-Al2O3 and Pd–W/γ-Al2O3 catalysts from organometallic precursors. The catalytic activity for NO decomposition

The photochemical reaction of W(CO)₆ with triphenylphosphine (PPh₃) in the presence of γ-Al₂O₃ and Pd/γ-Al₂O₃ has been used to prepare W/γ-Al₂O₃ and Pd–W/γ-Al₂O₃ catalysts. Adsorbed mono- and disubstituted W species have been identified by FTIR spectroscopy. There is evidence of the adsorption of W(CO)_6−x L_x species on both the alumina and the Pd surface. After thermal decomposition and reduction at 573 K the catalysts have been characterized by FTIR spectroscopy of adsorbed NH₃, CO and NO. The retention of W and P suppresses the Lewis acidity of the alumina support. On Pd–W/γ-Al₂O₃, the W is present in a partially reduced state in close association with Pd. This interaction modifies the chemisorptive properties of NO relative to those of the monometallic Pd and W catalysts. In line with these observations the Pd–W/γ-Al₂O₃ catalyst presents an enhanced activity for NO decomposition at 473 K.     

Formation at low surfactant concentrations and characterization of mesoporous MCM-41

At low concentrations of cetyltrimethylammonium bromide,all silica-based mesoporous materials with hexagonal phase have been synthesized via interactions between self-assembled surfactant molecule aggregates and aniomc silicate polymers.The resulting materials are characterized by XRD,FT-IR,solid state 29Si MAS NMR,thermal analysis and N2 adsorption-desorption measurements.After soluble ions are removed,the interactors between surfactant micelles and silicate polymers are reorganized and then form mesostructures 1 he hexagonal framework is sonsistent with amorphous silica gel.The structures of materials depend on the synthesis conditions Hydrothermal process improves the interactions between molecules and increases the degree of framework silicon atom polymerization The.surface area and the mesopore volume of the material prepared at 100℃ increase by 87% and 71 %,respectively,compared with those obtained at room temperature.     

Preparation and characterization of core-shell structured TiO2–BaCO3 particles

Preparation of core-shell structured TiO₂–BaCO₃ particles as precursor of BaTiO₃ genesis, proceeds using a two step procedure, by first coating the TiO₂ core by Ba(OH)₂ shell followed by conversion of the shell region with CO₂ gas by the formation of BaCO₃. Straightforward experimental results reveal environmental scanning electron microscopy (ESEM) and scanning transmission electron microscopy (STEM) as suitable methods for analytical characterization of the core and shell regions from individual TiO₂–BaCO₃ grains. Evidence of coating the whole ensemble of TiO₂ particles is possible using Photo Electro Motive Force (Photo EMF, PEMF) measurements. This method is able to indicate very sensitively changes of surface properties of TiO₂ after coating with Ba(OH)₂ and BaCO₃, respectively. PEMF measurements were used for the first time with concern to this topic.     

Easily prepared,high activity Ir–Ni oxide catalysts for water oxidation

Ir–Ni oxide nanoparticles were simply prepared by stirring IrCl₃ and NiCl₂ precursors in aqueous base under air. The activities of a series of IrNi_yO_x nanoparticles with different Ir-to-Ni ratios were measured toward water oxidation in 0.1 M H₂SO₄. The Ir-to-Ni ratio was 1:0.125 in the most active catalyst (mass normalized > 140 A g^− 1 Ir, electrochemically active surface area normalized > 203 A mmol^− 1Ir). The stabilized potential for the galvanostatic oxidation (1 mA cm^− 2_geometric) was as low as 1.51 V_RHE, corresponding to 0.28 V in overpotential.     

Comparison of catalytic pyrolysis of biomass with MCM-41 and CaO catalysts by using TGA–FTIR analysis

Pyrolysis of corncob with and without catalyst was investigated using thermogravimetry analyzer coupled with Fourier transform infrared spectroscopy (TGA–FTIR). The effects of two completely different catalysts, acid catalyst (MCM-41) and base catalyst (CaO), on the formation characteristics and composition of pyrolysis vapor were studied. The results show that these two catalysts give different product distributions. For catalytic run with MCM-41, the molality of carbonyl compounds decreases 10.2%, while that of phenols, hydrocarbons and CH₄ increases 15.32%, 4.29% and 10.16% compared with non-catalytic run, respectively. The increase of phenols exhibits in a wide temperature range from about 295 °C to 790 °C in the catalytic run with MCM-41 catalyst. However, the use of CaO in pyrolysis of corncob leads to a huge change of product distribution. The molality of acids decreases 75.88%, while the molality of hydrocarbons and CH₄ increases 19.83% and 51.05% compared with non-catalytic run, respectively. CaO is very effective in deacidification and the conversion of acids promotes the formation of hydrocarbons and CH₄. Catalytic pyrolysis of corncob with CaO shows two main weight-loss stages. The first stage is from 235 °C to 310 °C with a weight loss of 31%. The second stage is from 650 °C to 800 °C with a weight loss of 21%.