Effect of field emission property of carbon‐like nanofiber treated by using a fluorocarbon/oxygen plasma

Carbon‐like nanofiber (CNF) is synthesized using microwave plasma‐enhanced chemical vapor deposition. We present the effects of fluorocarbon and oxygen (CF₄/O₂) plasma‐treated on the microstructural, crystal, and field emission (FE) characteristics of CNF by SEM, transmission electron microscopy, micro‐Raman, and FE system. Results showed that the presence of the damaged CNF occurs at 2 min CF₄/O₂ plasma treatment and some amorphous carbon particles after 10 min CF₄/O₂ plasma treatment. One can also observe that turn‐on fields were enhanced (2.75 uA/cm²) at 2 min CF₄/O₂ plasma treatment; this indicates a remarkable FE enhancement of the local emission region in CNFs. Complementary information was obtained by thermal desorption atmospheric pressure ionization mass spectrometry and XPS. It can be found that the broken surface morphologies could be attributed to the chemical reaction exchanged via plasma excitation; a large number of bonding (C–F and C–O) in the CNF was detected. In addition, it is observed that the CNF has higher fluorine desorbed at 277.5 and 427 °C after CF₄/O₂ plasma treatment. Copyright © 2012 John Wiley & Sons, Ltd.     

Carbon monofluorides derived from sponge and shot cokes

Carbon fluoride compounds, CF _x , are used as cathode materials in commercially important primary Li/CF _x electrochemical power sources. New CF _x compounds were prepared, apparently for the first time, from sponge and shot cokes by direct fluorination. The carbon starting materials and CF _x products were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, and elemental analysis for total fluorine. The discharge capacity of shot coke CF _x was unexpectedly low and is probably related to the heterogeneous nature of that form of coke. CF _x prepared from sponge coke that had been heated to 1930 °C exhibited the highest capacity, exceeding the capacity of a commercially available, battery grade CF _x . The discharge results show that CF _x from heated sponge coke has favorable electrochemical properties that render it attractive for lithium electrochemical power sources. Electronic Publication     

New synthesis methods for fluorinated carbon nanofibres and applications

Several new synthesis methods of fluorinated carbon nanofibres, such as controlled fluorination using fluorinating agent (TbF₄ or XeF₂), or assisted fluorination under UV and gamma irradiation, are reviewed and compared with the direct fluorination using undiluted fluorine gas. The results highlight the different fluorination mechanisms for the direct fluorination and the new methods. The other advantage of those alternative fluorination routes is the possibility to provide fine tuning of the fluorination level, i.e. from F/C atomic ratio close to zero, as a functionalization, to the unity (CF₁) according to the required application, electrochemical or tribological. Two applications are described in this paper as a function of the fluorine content: protection against ozonation and use as solid lubricants.     

Determination of the kinetic parameters in magnesium alloy using TEM and DSC techniques

The effects of ageing treatment on phase transformations in Mg–Al alloy have been assessed. The techniques of scanning and transmission electron microscopy, microhardness and differential scanning calorimetric tests were used to characterize the materials obtained after application of artificial ageing. An ageing treatment at 175 °C causes the β-Mg₁₇Al₁₂ precipitation to become evenly distributed along the grain boundary and within the grain together with precipitation of the Al₆Mn and the Τ-Mg₃₂(Al,Zn)₄₉ phases. The transformation processes are associated with increased hardness values. The hardness value increases with the ageing time and attains maximum value after 10 h of ageing time. The presence of the β-Mg₁₇Al₁₂ phase acts as an effective barrier to dislocation motion, thus improving the mechanical properties of the alloy. Analysing the DSC data it is found a shift of peak temperatures to higher temperatures with increasing heating rates, which suggests that the solid state reactions are thermally activated and kinetically controlled. The fraction and the rate of transformation, the transformation function and the kinetic parameters such as activation energy and frequency factor for the alloy in artificial ageing conditions were determined.     

Kinetics of Na|CF<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> and Li|CF<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> systems

Properties of CF _x /Li and CF _x /Na cells were examined while using galvanostatic charging/discharging, electrochemical impedance spectroscopy and scanning electron microscopy (SEM). The capacity during the first cycle was as high as ca. 1000 mAh g^?1. Such an electrode is suitable for primary CF _x /Li and CF _x /Na batteries. SEM images of CF _x cathode showed that during discharging it was transformed into amorphous carbon and LiF or NaF crystals (of diameter of ca. 5–20 μm). These systems (C?+?LiF or C?+?NaF) cannot be reversibly converted back into CF _x /Li or CF _x /Na, respectively. Exchange current densities are between 10^?7 Acm^?2 and 10^?9 Acm^?2 when working with LiPF₆ and NaPF₆ electrolytes (1.12?×?10^?7 Acm^?2 and 6.82?×?10^?9 Acm^?2, respectively). Those values are low and indicate that the charge transfer process may be the rate-determining step. Activation energies for the charge transfer process were 57 and 72 kJ mol^?1 for CF _x /LiPF₆ and CF _x /NaPF₆ systems, respectively. Higher activation energy barrier for the CF/Na⁺?+?e^??→?C?+?NaF reaction results in lower observed exchange current density in comparison to the system with lithium ions.     

A composite made from palladium nanoparticles and carbon nanofibers for superior electrocatalytic oxidation of formic acid

We report on a novel type of nanocomposite for use in the electrooxidation of formic acid in fuel cells. The material is composed of palladium nanoparticles (Pd-NPs) and carbon nanofibers (CNFs) and was prepared by electrospinning of the precursors Pd(acac)₂ and polyacrylonitrile, respectively, followed by thermal treatment to generate in-situ Pd-NPs that are well dispersed within the CNF framework. The nanocomposite was characterized by TEM, high-resolution TEM, SEM, XRD, Raman spectroscopy, and XPS. The size of the Pd-NPs ranges from 12 to 82 nm, depending on the temperature for carbonization (700–1,000 °C). The length and width of the CNF is in the order of tens of micrometers and 300 to 500 nm, respectively. TEM and XPS studies indicate that the Pd-NPs are firmly embedded in the CNF, resulting in a good electrochemical stability of the composite. The electrocatalytic properties of the composite with respect to the oxidation of formic acid were studied by cyclic voltammetry and chronoamperometry. They showed a distinctly improved electrocatalytic activity and stability compared to a commercial Pd-on-carbon catalyst. The Pd/CNF composite carbonized at 900 °C was found to display the best performance.

Effects of Pressure and Electrode Length on the Abatement of N<Subscript>2</Subscript>O and CF<Subscript>4</Subscript> in a Low-Pressure Plasma Reactor

The emission of greenhouse gases, such as N₂O and fluorinated gases, has been increasingly regulated in the semiconductor industry. Pressure effects on the abatement of N₂O and CF₄ were investigated in a low-pressure plasma reactor by using Fourier transform infrared (FTIR) spectroscopy. The destruction and removal efficiency (DRE) of N₂O and CF₄ was significantly lowered below 0.2 Torr. When the pressure was increased, the DRE of CF₄ with H₂O as the reactant gas increased continuously, but that with O₂ or without any reactant gas first increased and then decreased. A larger electrode length yielded a higher DRE of N₂O and CF₄, especially at lower pressures. To understand this phenomenon, the electrical waveforms for the discharge in N₂O were analyzed in conjunction with its optical emission profiles, and the rotational temperatures for different electrode lengths were compared using the N₂ ⁺ ion band (λ = 391.4 nm). They provided insights into the mechanism involved in terms of plasma property and gas residence time.     

Study on the interaction of three structurally related cationic Pt(II) complexes with human serum albumin: importance of binding affinity and denaturing properties

Human serum albumin (HSA) primarily functions as a transport carrier for a vast variety of natural ligands and pharmaceutical drugs. In the present study, three structurally related cationic Pt(II) complexes ([Pt(ppy)(dppe)]CF₃CO₂: 1, Pt(bhq)(dppe)]CF₃CO₂: 2, and [Pt(bhq)(dppf)]CF₃CO₂: 3) were used to evaluate their interaction with HSA under different experimental setups, using UV–Vis absorption spectroscopy, fluorescence and circular dichroism techniques. The spectroscopic results suggest that upon binding to HSA, the Pt(II) complexes could effectively induce structural alteration of the protein. The complexes can bind to HSA with the binding affinities of the following order: 3 > 2 > 1. Also, thermodynamic parameters of binding between these complexes and HSA indicated the existence of entropy-driven spontaneous interaction which primarily dominated with the hydrophobic forces. Also, docking simulation study revealed the binding details of these complexes on HSA. Complex 3 with highest binding affinity for HSA indicates lowest denaturing effect on this protein. The low denaturation properties of 3 appear important in the terms of lower susceptibility of this platinum complex for possible development of deleterious side effects.     

Photo-switchable spin-crossover iron(III) compound based on intermolecular interactions

Iron(III) spin-crossover compounds, [Fe(qnal)₂]CF₃SO₃·MeOH (1·MeOH) and [Fe(qnal)₂]CF₃SO₃·acetone (1·acetone) were prepared and their spin transition properties were characterized by magnetic susceptibility measurement, Mössbauer spectroscopy and single crystal analysis. Two iron(III) compounds exhibited abrupt spin transition with thermal hysteresis loop (T _1/2?? = 115 K and T _1/2?? = 104 K for 1·MeOH, and T _1/2?? = 133 K and T _1/2?? = 130 K for 1·acetone). Single crystal analysis revealed both of the structures in high-spin (HS) and low-spin (LS) states for 1·acetone. The difference of bond length between the HS and LS states for 1·acetone was ~0.10 Å, which was corresponding to that of typical iron(III) SCO compounds. Specially, it showed strong intermolecular interactions by ???C?? stacking formed between the neighbor complexes leading to 2-D sheet. Both 1·MeOH and 1·acetone exhibited LIESST effect when it was illuminated at 1000 nm. We also confirmed that the introduction of strong intermolecular interactions, such as ???C?? stacking, can play an important role in LIESST effect.     

Hydrogen abstraction from CF3CF2CFH2 and CF3CFHCF2H by OH radicals and Cl atoms: theoretical enthalpies and rate constants

The hydrogen abstraction reactions of CF₃CF₂CFH₂ and CF₃CFHCF₂H with OH radicals and Cl atoms have been studied theoretically by a dual-level direct dynamics method. Two stable conformers of CF₃CF₂CFH₂ with C _s and C ₁ symmetries and all possible abstraction channels for each reaction are all taken into consideration. Optimized geometries and frequencies of all the stationary points and extra points along minimum-energy path (MEP) have been computed at the BB1K/6-31+G(d, p) level of theory. To refine the energy profile of each reaction channel, single point energy calculations have been performed by the BMC-CCSD method. The rate constants are evaluated by canonical variational transition state theory (CVT) with the small-curvature tunneling correction method (SCT) over a wide temperature range of 200–1,000 K. The detailed branching ratios of four reactions are discussed. The good agreement found between our theoretical rate constants and the available experimental data suggests that the present approach could provide a reliable prediction for the CF₃CFHCF₂H + Cl reaction about which there is little experimental information. The kinetic calculations show that the SCT effect plays an important role in all channels. In addition, in order to further reveal the thermodynamic properties, the enthalpies of formation of the reactants (CF₃CF₂CFH₂ and CF₃CFHCF₂H) and the product radicals (CF₃CF₂CFH, CF₃CFCF₂H, and CF₃CFHCF₂) are evaluated by applying isodesmic reactions at both BMC-CCSD//BB1K/6-31+G(d, p) and MC-QCISD//BB1K/6-31+G(d, p) levels of theory.     

Co-precipitation spray-drying synthesis and electrochemical performance of stabilized LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> cathode materials

In this paper, the LiNi_0.5Mn_1.5O₄ cathode materials of lithium-ion batteries are synthesized by a co-precipitation spray-drying and calcining process. The use of a spray-drying process to form particles, followed by a calcination treatment at the optimized temperature of 750 °C to produce spherical LiNi_0.5Mn_1.5O₄ particles with a cubic crystal structure, a specific surface area of 60.1 m² g^?1, a tap density of 1.15 g mL^?1, and a specific capacity of 132.9 mAh g^?1 at 0.1 C. The carbon nanofragment (CNF) additives, introduced into the spheres during the co-precipitation spray-drying period, greatly enhance the rate performance and cycling stability of LiNi_0.5Mn_1.5O₄. The sample with 1.0 wt.% CNF calcined at 750 °C exhibits a maximum capacity of 131.7 mAh g^?1 at 0.5 C and a capacity retention of 98.9% after 100 cycles. In addition, compared to the LiNi_0.5Mn_1.5O₄ material without CNF, the LiNi_0.5Mn_1.5O₄ with CNF demonstrates a high-rate capacity retention that increases from 69.1% to 95.2% after 100 cycles at 10 C, indicating an excellent rate capability. The usage of CNF and the synthetic method provide a promising choice for the synthesis of a stabilized LiNi_0.5Mn_1.5O₄ cathode material.

Open image in new window

Graphical Abstract Micro/nanostructured LiNi_0.5Mn_0.5O₄ cathode materials with enhanced electrochemical performances for high voltage lithium-ion batteries are synthesized by a co-precipitation spray-drying and calcining routine and using carbon nanofragments (CNFs) as additive.

     

Facile Synthesis of Amino Shell-Magnetic Core Nanoparticles and Application for Direct Electrochemistry

This paper reports a core-shell nanoparticle system coated on the carbon paste electrode (CPE) for determination of hydrogen peroxide. The amino-functionalized shell-magnetic core nanoparticles have been proven to be an effective material for Hb immobilization. The core-shell nanoparticle system was constructed by immobilizing hemoglobin (Hb) on amino-functionalized shell@magnetic core composite nanoparticles (NH₂-SiO₂-CoFe₂O₄) with the bridge of gold nanoparticles (AuNPs). Electrochemical impedance spectroscopy, cyclic voltammetry, and chronoamperometry were used to characterize the obtained biosensor. The Hb/AuNPs/NH₂-SiO₂-CoFe₂O₄/CPE showed a linear range from 1.9 × 10^?6 to 4.6 × 10^?3 M, with a detection limit of 6.3 × 10^?7 M (S/N = 3) under the optimized experimental conditions. A good affinity was shown due to the small apparent Michaelis–Menten constant of 2.68 mM.     

Effect of MeV protons on the phase behaviour and thermal stability of polytetrafluoroethylene

Thermomechanical spectroscopy analysis was used to study the influence of accelerated protons on the molecular-topological properties of polytetrafluoroethylene (PTFE). The study showed changes in a wide number of polymer parameters as a result of bombardment with 1, 2 and 4 MeV protons at fluences up to 2 × 10¹⁵ protons/cm². The basic topological process occurring under proton bombardment is amorphicity, as found for γ-irradiation of PTFE. The flow temperature of bombarded PTFE significantly decreases with increasing the fluxes and energy of the accelerated protons. The general process resulting from proton bombardment is cleavage of C-F bonds, leading to formation of “centered” radicals ～CF₂CF · CF₂～ and HF. The thermal stability of bombarded PTFE is below than that of virgin polymer. The rate of thermal destruction noticeably increases and the temperature of the initiation of effective thermal decomposition decreases after bombardment. The gaseous products generated during thermal destruction of the bombarded and virgin PTFE are similar.     

Creating cellulose fibres with excellent UV protective properties using moist CF4 plasma and ZnO nanoparticles

Weakly ionised gaseous plasma created in a moist tetrafluoromethane gas at a low pressure with an electrodeless radiofrequency discharge was applied to modify the surface properties of cellulose fibres. The plasma was used to increase the adsorption of zinc oxide (ZnO) nanoparticles such that cellulose fibres with good ultraviolet (UV) protective properties could be created. The UV protection factor (UPF) values of the ZnO-functionalised fibres were determined as a function of the plasma treatment time. The chemical and physical surface properties of the plasma-treated fibres were examined using scanning electron microscopy, X-ray photoelectron spectroscopy, and wettability tests. The quantity of zinc on the fibres was determined using inductively coupled plasma mass spectroscopy. The results indicated that 30 s of plasma treatment resulted in ZnO-functionalised samples with lower UPF values than samples without plasma treatment due to the creation of fluorine-rich functional groups on cellulose fibres and the agglomeration of ZnO nanoparticles. The highest UPF values (50+) were obtained when samples were treated with plasma for 10 s. These high UPF values were a result of the increased adsorption of uniformly distributed ZnO nanoparticles caused by fibres surface functionalization and roughening upon plasma treatment. Furthermore, the mechanical properties of textiles treated with moist CF₄ plasma for 10 s were slightly improved.     

A new photoluminescent silica aerogel based on N-hydroxysuccinimide–Tb(III) complex

The paper describes the preparation of a new photoluminescent silica aerogel by embedding a new Tb(III) complex in a silica matrix by using N-hydroxysuccinimide as ligand. The Tb(III) complex prepared at a metal to ligand ratio of 1:3 (mol%) exhibits strong photoluminescence as a result of specific radiative transitions within the Tb(III) cation with the most intense peak located at 543 nm due to ⁵D₄ → ⁷F₅ transition. The synthesized complex was doped in the silica matrix through a catalyzed sol–gel process. After ageing in ethanol, the alcogel was dried under supercritical regime by exchanging the ethanol with liquid carbon dioxide followed by supercritical evaporation. The leaching of the free complex from the alcogel during ageing and solvent exchange phases was found to be minimal most likely due to the interactions between chemical groups of complex with those specific to silica matrix. The obtained regular shaped monolithic aerogel preserved the remarkable photoluminescent properties and also improved the thermal stability of the free complex. Both, the free complex and doped aerogel were characterized through thermal analysis, FT-IR, powder X-ray diffraction, Scanning electron microscopy and fluorescence spectroscopy. For comparison purposes, an undoped silica aerogel was also prepared and investigated through FT-IR, BET analysis and powder X-ray diffraction. The excellent photoluminescent properties might recommend the prepared aerogel for applications in optoelectronic devices where photonic conversion materials are required.     

Calorimetric investigation of order–disorder transition in Cu0.6Pd0.4 and Cu0.85Pd0.15 alloys

Order–disorder phase transitions in Cu_0.6Pd_0.4 and Cu_0.85Pd_0.15 alloys have been investigated using differential scanning calorimetry and drop calorimetry. The differential scanning calorimetry measurements show that the transition in both these alloys are reversible in nature and the enthalpy increment measurements reveal that these transitions are first order in nature. The transition temperature of first-order phase transition in Cu_0.6Pd_0.4 and Cu_0.85Pd_0.15 alloys have been evaluated to be 884(±2) and 799(±2) K, respectively, from drop calorimetric measurements. The latent heat of first-order phase transition in Cu_0.6Pd_0.4 alloy were evaluated to be 31.2(±0.6) and 28.9(±0.5) J g^?1, by enthalpy increment and differential scanning calorimetry measurements, respectively. Similarly, the latent heat of first-order phase transition in Cu_0.85Pd_0.15 alloy were evaluated to be 23.1(±0.6) and 21.3(±0.5) J g^?1, by enthalpy increment and differential scanning calorimetry measurements, respectively. The solidus temperatures of Cu_0.6Pd_0.4 and Cu_0.85Pd_0.15 alloys were found to be 1,457(±2) and 1,360 K, respectively.     

Pyrolysis of pine needles: effects of process parameters on products yield and analysis of products

Pyrolysis of pine needles was carried out in a semi-batch reactor. The effects of pyrolysis parameters such as temperature (350–650 °C), heating rate (10 and 50 °C min^?1), nitrogen flow rate (50–200 cm³ min^?1) and biomass particle size (0.25–1.7 mm) were examined on products yield. Maximum bio-oil yield of 43.76% was obtained at pyrolysis temperature of 550 °C with a heating rate of 50 °C min^?1, nitrogen flow rate of 100 cm³ min^?1 for biomass particle size of 0.6 < d _p < 1 mm. The characterization of pyrolysis products (bio-oil, bio-char) has been made through different instrumental methods like Fourier transform infrared spectroscopy, gas chromatography–mass spectrometry, nuclear magnetic resonance spectroscopy (¹H NMR), X-ray powder diffraction, field emission scanning electron microscope and Brunauer–Emmett–Teller surface area analysis. The empirical formula of the bio-oil and bio-char was found as CH_1.47O_0.36N_0.005 and CH_0.56O_0.28N_0.013 with heating value of 26.25 and 25.50 MJ kg^?1, respectively. Results show that bio-oil can be potentially valuable as a renewable fuel after upgrading and can be used as a feedstock for valuable chemicals production. The properties of bio-char reveal that it can be used as solid fuels, as a cheap adsorbent and as a feedstock for activated carbon production.     

Mechanism of the initiation of low-temperature radiation telomerization of tetrafluoroethylene in hexafluoroisopropanol

ESR and IR spectroscopy and scanning calorimetry are used to investigate the mechanism of low-temperature radiation telomerization of tetrafluoroethylene (TFE) in hexafluoroisopropanol (HFIP). It is found that the low-temperature telomerization of TFE in HFIP proceeds via an ion-radical mechanism. This process is initiated by the radical anions (CF₃)₂C^·-O^? formed during the deprotonation of OH groups of primary hydroxyl radicals (CF₃)₂C^·-OH exhibiting strong acidic properties. An interpretation of ESR spectra of irradiated HFIP recorded at 230–240 K is proposed with regard to the anisotropy on β-fluorine atoms and estimates of the angles between the corresponding C-F bonds and the axis of the unpaired electron orbital.     

Gas-Phase Chemistry of 1,1,2,3,3,4,4-Heptafluorobut-1-ene Initiated by Chlorine Atoms

The possibility of mitigating climate change by switching to materials with low global warming potentials motivates a study of the spectroscopic and kinetic properties of a fluorinated olefin. The relative rate method was used to determine the rate constant for the reaction of heptafluorobut-1-ene (CF₂=CFCF₂CF₂H) with chlorine atoms in air. A mercury UV lamp was used to generate atomic chlorine, which initiated chemistry monitored by FTIR spectroscopy. Ethane was used as the reference compound for kinetic studies. Oxidation of heptafluorobut-1-ene initiated by a chlorine atom creates carbonyl difluoride (CF₂=O) and 2,2,3,3 tetrafluoropropanoyl fluoride (O=CFCF₂CF₂H) as the major products. Anharmonic frequency calculations allowing for several low-energy conformations of 1,1,2,3,3,4,4 heptafluorobut-1-ene and 2,2,3,3 tetrafluoropropanoyl fluoride, based on density functional theory, are in good accord with measurements. The global warming potentials of these two molecules were calculated from the measured IR spectra and estimated atmospheric lifetimes and found to be small, less than 1.     

Cellulose and chitin nanomaterials for capturing silver ions (Ag+) from water via surface adsorption

The study explores the potential of cellulose nanocrystals (CNC), cellulose nanofibers (CNF) and chitin nanocrystals (ChNC) isolated from bioresidues to remove silver ions from contaminated water. Zeta sizer studies showed negatively charged surfaces for CNC and CNF isolated from cellulose sludge in the acidic and alkaline pHs, whereas ChNC isolated from crab shell residue showed either positive or negative charges depending on pH conditions. Model water containing silver ions showed a decrease in Ag⁺ ion concentration (measured by inductively coupled plasma-optical emission spectrometer; inductively coupled plasma mass spectrometry), after treatment with CNC, CNF and ChNC suspensions. The highest Ag⁺ ion removal was measured near neutral pH for CNC, being 34.4 mg/g, corresponding to 64 % removal. ChNC showed 37 % and CNF showed 27 % removal of silver ions. The WDX (wavelength dispersive X-ray analysis) and XPS (X-ray photoelectron spectroscopy) analysis confirmed the presence of silver ions on the surface of the nanocellulose and nanochitin after adsorption. Surface adsorption on the nanoparticles via electrostatic interactions is considered to be the prominent mechanism of heavy metal ion capture from aqueous medium, with CNC with negative surface charge and negatively charged functional groups being most favourable for the adsorption of positively charged Ag⁺ ions compared to other native bionanomaterials.