Immobilization and electrochemistry of cytochrome c on amino-functionalized mesoporous silica thin films

The immobilization and electrochemistry of cytochrome c (cyt c) on amino-functionalized mesoporous silica thin films are described. The functionalized silica films with an Im3m cubic phase structure were deposited on conducting ITO substrate by co-condensation of tetraethoxysilane (TEOS) and 3-aminopropyltriethoxysilane (APTES) in the presence of Pluronic F127 under acidic conditions. The high specific surface area, large pore size and functional inner surface of mesoporous silica thin films result in a high cyt c loading, and the cyt c immobilization on this silicate framework is stable. After adsorption of cyt c, the ordered cubic structure of mesoporous silica and the redox activity of immobilized cyt c are retained as demonstrated by X-ray diffraction (XRD), Transmission electron microscope (TEM) and cyclic voltammetry. The redox behavior of the cyt c/silica film-modified ITO electrode is a surface-controlled quasi-reversible process for the experimental conditions used in this work and the electron transfer rate constant is calculated is 1.33 s⁻¹. The ITO electrode modified by cyt c/silica film possesses a high stability; even cyt c retains its redox activity following immobilization for several months. Furthermore, the electrocatalytic activities of the modified ITO electrode to hydrogen peroxide and ascorbic acid have been studied. Since these behaviors are quite pronounced, the modified electrode can be used for detection of hydrogen peroxide and ascorbic acid.     

Simple one-step process for immobilization of biomolecules on polymer substrates based on surface-attached polymer networks

For the miniaturization of biological assays, especially for the fabrication of microarrays, immobilization of biomolecules at the surfaces of the chips is the decisive factor. Accordingly, a variety of binding techniques have been developed over the years to immobilize DNA or proteins onto such substrates. Most of them require rather complex fabrication processes and sophisticated surface chemistry. Here, a comparatively simple immobilization technique is presented, which is based on the local generation of small spots of surface attached polymer networks. Immobilization is achieved in a one-step procedure: probe molecules are mixed with a photoactive copolymer in aqueous buffer, spotted onto a solid support, and cross-linked as well as bound to the substrate during brief flood exposure to UV light. The described procedure permits spatially confined surface functionalization and allows reliable binding of biological species to conventional substrates such as glass microscope slides as well as various types of plastic substrates with comparable performance. The latter also permits immobilization on structured, thermoformed substrates resulting in an all-plastic biochip platform, which is simple and cheap and seems to be promising for a variety of microdiagnostic applications.     

Development and Characterization of Nickel‐NTA‐Polyaniline Modified Electrodes

The engineered addition of hexa‐histidine sequences to biomolecules such as antibody fragments has been found to be an excellent means of purifying these materials. This tagging methodology has also been extended to its use as a tool for immobilization and orientation of antibodies on transducer surfaces. Polyvinyl sulfonate‐doped polyanilne (PANI/PVS) can be used as a mediator in amperometric biosensors. This short communication looks at the effect of nickel chelate materials and nickel chelation on this conducting polymer and evaluates it as a potential surface for the immobilization of his‐tagged biomolecules. N‐nitrilotriacetic acid (NTA) was doped into the electropolymerized PANI/PVS at a screen‐printed carbon paste electrode. The resulting NTA‐PANI/PVS film was shown to have comparable electrochemical properties of polymer without the chelating agent. When Ni²⁺ was applied to the electrode, the incorporated NTA was found to efficiently chelate the metal ions at the electrode surface.     

Biorecognition on Graphene: Physical,Covalent, and Affinity Immobilization Methods Exhibiting Dramatic Differences

The preparation of biorecognition layers on the surface of a sensing platform is a very crucial step for the development of sensitive and selective biosensors. Different protocols have been used thus far for the immobilization of biomolecules onto various electrode surfaces. In this work, we investigate how the protocol followed for the immobilization of a DNA aptamer affects the performance of the fabricated thrombin aptasensor. Specifically, the differences in selectivity and optimum amount of immobilized aptamer of the fabricated aptasensors adopting either physical, covalent, or affinity immobilization were compared. It was discovered that while all three methods of immobilization uniformly show a similar optimum amount of immobilized aptamer, physical, and covalent immobilization methods exhibit higher selectivity than affinity immobilization. Hence, it is believed that our findings are very important in order to optimize and improve the performance of graphene‐based aptasensors.     

Molecular bilayer-based superstructures of a fullerene-carrying ammonium amphiphile: structure and electrochemistry

The synthesis of a water-soluble C60-carrying single-chain ammonium amphiphile, 10- (N-methyl-2-fulleropyrrolidyl)decyltrimethylammonium bromide (1) as well as the characterization of aqueous solutions and cast films of 1 are described. X-ray diffraction study suggests that cast films of 1 form a multilayer structure based on biomembrane-like molecular bilayers. Electron microscopy has revealed that 1 produces both fibrous and disk-like aggregates with 10-12 nm of thickness through self-organization of 1 in aqueous solution. Differential scanning calorimetry, dynamic light scattering, FTIR, and UV-visible absorption studies were also carried out to characterize aqueous solutions and cast films of 1. Electrochemistry for an aqueous solution and for cast films of just 1 and 1 incorporated in lipid films on electrodes was conducted. It was found that films of just 1 and of 1/lipid cast on electrodes showed electron transfer reactions leading to the generation of the fullerene dianion or trianion. In contrast, electrochemistry of aqueous solution of 1 at a bare electrode gives a cathodic current near -0.5 to -0.6 V against SCE; however, an anodic current for the solution did not appear.     

Aldehyde-functionalized benzenediazonium cation for multiprobe immobilization on microelectrode array surfaces

We report in situ generation of aldehyde-functionalized benzenediazonium cation (ABD) and its use as a suitable linker molecule for fast and selective immobilization of biomolecules on indium-tin-oxide (ITO) electrode surfaces. We prepared ABD through a new reaction procedure, a simultaneous diazotation of the amine group and deprotection of the aldehyde group from an aniline derivative, 2-(4-aminophenyl)-1,3-dithiane, which was revealed on the ITO electrode surfaces through the electrodeposition of the reaction product and the characterization of the resulting surfaces with cyclic voltammetry, X-ray photoelectron spectroscopy, and protein immobilization. We also showed that successive electrodeposition of ABD and probe molecules on individually addressable microarray electrode surfaces can provide a useful platform for efficient detection of multianalyte. The usage of ABD has been demonstrated by the patterning of three different probe molecules on a single substrate and the simultaneous detection of two target molecules.     

DNA纳米网络修饰碳纤维盘电极及其分子传感应用

DNA immobilization on electrode surfaces has been widely used for fabricating sensors since DNA can interact with a wide variety of biomolecules. Recendy, DNA has been demonstrated as an electronic super conductor and become the most promising biomolecule for application of chemical sensing in biological system. Calf thymus DNA (ct-DNA) is a most popularly used native DNA in many applications. An electrochemical deposition on carbon fiber micro electrode can provide sensitive detection of dopamine in presence of large amount of ascorbic acid.     

Novel synthetic route for covalent coupling of biomolecules on super‐paramagnetic hybrid nanoparticles

The immobilization of biomolecules on magnetic nanoparticles is an issue with high potential in different fields. We describe herein a new strategy to immobilize biomolecules on super‐paramagnetic nanoparticles based on the reactivity of vinyl sulfone groups with naturally occurring functional groups present in biomolecules (amine and thiol). A new monomer containing a polymerizable methacryloyl group and a secondary amine group was synthesized and used to prepare super‐paramagnetic hybrid nanoparticles (SP‐HNPs) by two‐step miniemulsion polymerization. The Michael addition reaction of divinyl sulfone (DVS) to the secondary amine groups localized on the nanoparticles surface allows the introduction of the vinyl sulfone function in the SP‐HNPs (SP‐HNPs‐VS). The morphology of the functionalized SP‐HNPs was characterized by transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), dynamic light scattering, and magnetic susceptibility. The capacity of SP‐HNPs‐VS for the immobilization of biomolecules was evaluated with three model proteins: avidin, invertase, and horseradish peroxidase (HRP). The model proteins were successfully immobilized in mild aqueous conditions compatible with the biological nature of the enzymes. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Micro- to nanostructured poly(pyrrole-nitrilotriacetic acid) films via nanosphere templates: applications to 3D enzyme attachment by affinity interactions

We report the combination of latex nanosphere lithography with electropolymerization of N-substituted pyrrole monomer bearing a nitrilotriacetic acid (NTA) moiety for the template-assisted nanostructuration of poly(pyrrole-NTA) films and their application for biomolecule immobilization. The electrodes were modified by casting latex beads (100 or 900 nm in diameter) on their surface followed by electropolymerization of the pyrrole-NTA monomer and the subsequent chelation of Cu²⁺ ions. The dissolution of the nanobeads leads then to a nanostructured polymer film with increased surface. Thanks to the versatile affinity interactions between the (NTA)Cu²⁺ complex and histidine- or biotin-tagged proteins, both tyrosinase and glucose oxidase were immobilized on the modified electrode. Nanostructuration of the polypyrrole via nanosphere lithography (NSL) using 900- and 100-nm latex beads allows an increase in surface concentration of enzymes anchored on the functionalized polypyrrole electrode. The nanostructured enzyme electrodes were characterized by fluorescence microscopy, 3D laser scanning confocal microscopy, and scanning electron microscopy. Electrochemical studies demonstrate the increase in the amount of immobilized biomolecules and associated biosensor performances when achieving NSL compared to conventional polymer formation without bead template. In addition, the decrease in nanobead diameter from 900 to 100 nm provides an enhancement in biosensor performance. Between biosensors based on films polymerized without nanobeads and with 100-nm nanobeads, maximum current density values increase from 4 to 56 μA cm^?2 and from 7 to 45 μA cm^?2 for biosensors based on tyrosinase and glucose oxidase, respectively.     

Application of Nanoparticles in Electrochemical Sensors and Biosensors

The unique chemical and physical properties of nanoparticles make them extremely suitable for designing new and improved sensing devices, especially electrochemical sensors and biosensors. Many kinds of nanoparticles, such as metal, oxide and semiconductor nanoparticles have been used for constructing electrochemical sensors and biosensors, and these nanoparticles play different roles in different sensing systems. The important functions provided by nanoparticles include the immobilization of biomolecules, the catalysis of electrochemical reactions, the enhancement of electron transfer between electrode surfaces and proteins, labeling of biomolecules and even acting as reactant. This minireview addresses recent advances in nanoparticle‐based electrochemical sensors and biosensors, and summarizes the main functions of nanoparticles in these sensor systems.     

An enzyme electrode based on electromagnetic entrapment of the biocatalyst bound to magnetic beads

A new type of biosensor is described. It is based on the use of a Clark-type oxygen electrode placed in an electromagnetic field. The biomolecules used in this sensor are immobilized on small magnetic beads which are added to the system when needed and removed as required. By varying the strength of the magnetic field, a homogeneous distribution of particles at the electrode tip is achieved. The electrode is used for the determination of glucose with immobilized glucose oxidase as well as cells of Saccharomyces cerevisiae.     

Electrochemical Sensitive Determination of Nanomolar Guanine from ZnO Nanorods Coated on Platinum Electrode

The crystalline ZnO nanorods, grown on Si‐substrate (100) at a low temperature using a hydrothermal process were used for modification of platinum electrode using PVC and THF for in order to test their chemosensor activity. The modified electrode can be used for selective nanomolar determination of guanine in aqueous media without any interference from other biomolecules. The prepared chemosensor has a lower detection limit of 40 nM for guanine, and a modification of the electrodes with ZnO nanorods increases the reproducibility by reducing the fouling effect caused by the oxidation of biomolecules on the electrode surface as the prepared electrode can be used for more than 30 consecutive scans and can be used for 5 days without any change in current intensity or sensitivity.     

Protein patterning based on electrochemical activation of bioinactive surfaces with hydroquinone-caged biotin

We report a protein attachment and patterning method based on a hydroquinone-caged biotin surface that generates bioactive biotin by mild electrochemical perturbation. The electrochemical activation proceeds under the buffered aqueous environment at neutral pH. It also allows site-selective generation of bioactive biotin for the immobilization of target protein by using prepatterned electrode arrays.     

电聚吡咯固定化酪氨酸酶电极的制备及性能

在应用恒电位法电化学聚合吡咯的同时 ,将酪氨酸酶固定在导电聚吡咯膜内 ,制成一种灵敏、稳定的酪氨酸电极 .讨论了溶液 pH值和聚合电位对酶固定化的影响 ,对酶分子嵌入吡咯膜前后的SEM图和CV曲线进行了分析、比较 .该电极对甲苯酚响应的线性范围为 5 .0× 10 -8～ 1.0× 10 -6mol/L ,最适 pH值为 6 .6 ,酶反应表观上遵循Michaelis_Menten动力学 ,表观米氏常数为 2 .2× 10 -5mol/L .     

In-situ grafting hydrophilic polymer on chitosan modified poly(dimethylsiloxane) microchip for separation of biomolecules

In this paper, a simple and green modification method is developed for biomolecules analysis on poly(dimethylsiloxane) (PDMS) microchip with successful depression of nonspecific biomolecules adsorption. O-[(N-succinimdyl)succiny]-o'-methyl-poly(ethylene glycol) was explored to form hydrophilic surface via in-situ grafting onto pre-coated chitosan (Chit) from aqueous solution in the PDMS microchannel. The polysaccharide chains backbone of Chit was strongly attracted onto the surface of PDMS via hydrophobic interaction combined with hydrogen bonding in an alkaline medium. The methyl-poly(ethylene glycol) (mPEG) could produce hydrophilic domains on the mPEG/aqueous interface, which generated brush-like coating in this way and revealed perfect resistance to nonspecific adsorption of biomolecules. This strategy could greatly improve separation efficiency and reproducibility of biomolecules. Amino acids and proteins could be efficiently separated and successfully detected on the coated microchip coupled with end-channel amperometric detection at a copper electrode. In addition, it offered an effective means for preparing biocompatible and hydrophilic surface on microfluidic devices, which may have potential use in the biological analysis.     

Surface characterization of 3-glycidoxypropyltrimethoxysilane films on silicon-based substrates

Silane coupling agents are commonly used to activate surfaces for subsequent immobilization of biomolecules. The homogeneity and surface morphology of silane films is important for controlling the structural order of immobilized single-stranded DNA probes based on oligonucleotides. The surfaces of silicon wafers and glass slides with covalently attached 3-glycidoxypropyltrimethoxysilane (GOPS) have been characterized by using angularly dependent X-ray photoelectron spectroscopy (XPS), time-of-flight secondary-ion mass spectrometry (ToF–SIMS), atomic force microscopy (AFM), scanning electron microscopy (SEM), and monochromatic and spectroscopic ellipsometry. XPS and ToF–SIMS data provided evidence of complete surface coverage by GOPS. Data from angularly resolved XPS and ellipsometry methods suggested that the GOPS films were of monolayer thickness. AFM and SEM data indicated the presence of films that consisted of nodules approximately 50–100 nm in diameter. Modeling suggested that the nodules may lead to a nanoscale structural morphology that might influence the hybridization kinetics and thermodynamics of immobilized oligonucleotides.     

Amperometric detection of pyridine nucleotides via immobilized viologen-accepting pyridine nucleotide oxidoreductase or immobilized diaphorase

The immobilization and electrical connection of a viologen-accepting pyridine nucleotide oxidoreductase (VAPOR) on an electrode surface by coadsorption with an amphiphilic pyrrole viologen and electropolymerization of this pyrrole monomer are described. The immobilized VAPOR catalyzes the reduction of NAD(P)(+) to NAD(P)H by the viologen redox couple (V(2+2+)). The sensitivity of this biosensor is 1.4 and 2.5 mA M(-1) cm(-2) for NAD(+) and NADP(+) respectively. The immobilization of diaphorase within a laponite gel adsorbed on an electrode surface is described. The incorporation and electropolymerization of Methylene Blue in the biolayer allows an electron transfer communication between diaphorase molecules and the electrode surface. The diaphorase electrode thus obtained responds to NADH at 0 V. The sensitivity and detection limit of this biosensor are 11.2 mA M(-1) cm(-2) and 1 muM respectively.     

Facile immobilization of biomolecules onto various surfaces using epoxide-containing antibiofouling polymers

The surface modifications of plastic or glass substrate and the subsequent immobilization of biomolecules onto the surfaces has been a central feature of the fabrication of biochips. To this end, we designed and synthesized new epoxide-containing random copolymers that form stable polymer adlayers on plastic or glass surface and subsequently react with amine or sulfhydryl functional groups of biomolecules under aqueous conditions. Epoxide-containing random copolymers were synthesized by radical polymerization of three functional monomers: a monomer acting as an anchor to the surfaces, a PEG group for preventing nonspecific protein adsorption, and an epoxide group for conjugating to biomolecules. Polymer coating layers were facilely formed on cyclic olefin copolymer (COC) or glass substrate by simply dipping each substrate into a solution of each copolymer. The polymer-coated surfaces characterized by a contact angle analyzer and X-ray photoelectron spectroscopy (XPS) showed very low levels of nonspecific immunoglobulin G (IgG) adsorption compared to the uncoated bare surface (control). Using a microcontact printing (μCP) method, antibodies as representative biomolecules could be selectively attached onto the copolymers-coated glass or COC surface with high signal-to-noise ratios.     

In-situ synthesis of poly(dimethylsiloxane)-gold nanoparticles composite films and its application in microfluidic systems

We presented a simple approach for in-situ synthesis of poly(dimethylsiloxane) (PDMS)-gold nanoparticles composite film based on the special characteristics of PDMS itself. It is an environmentally safe synthesis method without the requirement of additional reducing/stabilizing agents. The region where the resulting gold nanoparticles distribute (in the matrix or on the surface of the polymer) and the size of the nanoparticles, as well as the colour of the free-standing films, can be simply controlled by adjusting the ratio of curing agent and the PDMS monomer. The chemical and optical properties of these composite films were studied. Using such a method, gold nanoparticle micropatterns on PDMS surfaces can be performed. And based on the gold nanoparticles micropattern, further modification with antibodies, antigens, enzymes and other biomolecules can be achieved. To verify this ability, an immobilized glucose oxidase (GOx) reactor in microchannels was built and its performance was studied. The experiments have shown that the resulting composite film may have a lot of potential merits in protein immobilization, immunoassays and other biochemical analysis on PDMS microchips.     

Determination of underivatized amino acids by high-performance liquid chromatography and electrochemical detection at an amino acid oxidase immobilized CuPtCI6 modified electrode

An amperometric sensor for amino acids based on the immobilization of amino acid oxidase on the surface of a CuPtCl(6)/GC is described. The amperometric current is due to the oxidation of H2O2 liberated during the enzyme reaction on the surface of the enzyme electrode. The electrode response characteristics as well as kinetic parameters have been evaluated. The enzyme electrode was characterized as an electrochemical biosensor, which was used as detector in high performance liquid chromatography (HPLC) for the determination of a mixture of amino acids with satisfactory results.