Growth and optical properties of Hf,Ce co-doped lithium niobate crystals

In this paper, a series of Hf,Ce co-doped lithium niobate crystals with various HfO₂ concentrations were grown by Czochralski method. The ultraviolet-visible absorption spectra and the infrared transmittance spectra were measured to study defect structure of the crystals. The optical damage resistance was measured by the transmitted facula distortion method. The results showed that the optical damage resistance of Hf:Ce:LiNbO₃ was greatly improved when the Hf-doping concentration was above 4 mol%.     

Investigation of the phase transitions of ferroelectric KIO3 and KNbO3 crystals by optical diffraction

Optical diffraction is reviewed as a technique for investigation of the phase transitions in crystals with a multidomain structure. It has been used to study the phase transitions in KIO₃ and KNbO₃ single crystals. Strong optical diffraction bands resulted from electric domains in KNbO₃ crystals and their change with temperature were observed when a laser beam passed through the crystals. The diffraction patterns observed changed abruptly at 427°C, 223°C, and -50°C respectively, at which KNbO₃ crystals undergo structural phase transitions. It is considered that the change of the diffraction patterns with temperature is due to change of the electric domains in the crystals.     

Defect structure and optical damage resistance of Hf:Fe:LiNbO3 crystals

A series of Hf:Fe:LiNbO₃ crystals were grown by the Czochralski technique with various doping concentrations of HfO₂. Their defect structures were analyzed by the UV-visible absorption spectra and infrared absorption spectra. The optical damage resistance of Hf:Fe:LiNbO₃ crystals was measured by the photo-induced birefringence change and the transmitted light spot distortion method. The results show that the optical damage resistance ability of Hf:Fe:LiNbO₃ crystals enhances remarkably with the HfO₂ concentration increasing when the HfO₂ concentration is lower than its threshold concentration (4 mol%). However, when the HfO₂ concentration exceeds its threshold concentration, the optical damage resistance ability of the crystals returns to decrease. This unusual behavior is explained by using the photovoltaic field produced in the crystals.     

A model for the transition in the oxidation of zirconium-base alloys

At a weight gain of approximately 20 to 30 mg/dm² during the oxidation of zirconium-base alloys at reactor operating temperatures the oxidation rate accelerates. This is the so-called transition. A mechanistic model has been developed to describe the transition based on the growth and interconnection of small pores along the oxide-metal interface. Once the pores interconnect, coolant can reach the oxide-metal interface and oxidation accelerates. The model has been programmed and incorporated into the previously reported oxidation model. Good agreement has been obtained between the model predictions and experimental data.     

Thermoluminescence and opitical absorption of BaF2 crystals

Abstract

Nominally pure and Dy-doped BaF₂ crystals were investigated concerning their optical absorption (OA) and thermoluminescence (TL) properties. Peaks at 120—150 and 200°C were observed for a heating rate of 1.7°C/s. The TL response for γ-rays and the TL emission spectra were obtained for these peaks. Except for the purest crystal, all BaF₂ crystals produced OA bands before irradiation typical of Ce³⁺ ions. After irradiation, Dy doped crystals showed bands due to Dy²⁺ ions. A nominally pure sample gave bands related to Ce²⁺ ions and photochromic centers of Ce³⁺ ions. and photochromic centres of Ce³⁺ ions. The correlation between some OA bands and TL peaks is discussed.     

Effects of forming gas annealing on LiNbO3 single crystals

Z-cut congruent LiNbO₃ single crystals were annealed in 95%N₂+5%H₂ at high temperatures. X-ray diffraction showed that 2θ of (0 0 0 6) peak is obviously reduced by 0.6° and 1.0° for the samples annealed at 600 and 900 °C, respectively. A new peak appears at the high-energy side of O 1s spectrum in X-ray photoelelectron spectroscopy (XPS) analyses, and the leakage current is greatly increased. It is proposed that hydrogen is incorporated in LiNbO₃ single crystals through forming gas annealing at temperatures up to 900 °C and exists in LiNbO₃ as a proton bound to an oxygen ion through O-H bond with its electron donated.     

Wavelength conversion in a Ti:PPSMgLN channel waveguide

A periodically poled titanium (Ti)-diffusion waveguide in near-stoichiometric MgO:LiNbO₃ (SMgLN) was fabricated that exhibits a second harmonic generation (SHG) efficiency of 63%. The device shows very high resistance to photorefractive damage at room temperature. All optical wavelength conversion by difference frequency generation (DFG) has been demonstrated in a periodically poled SMgLN (PPSMgLN) with Ti-diffusion channel waveguides. The wavelength conversion efficiency was measured to be −7.3 dB with the pump power of 150 mW and the signal power of 50 mW at room temperature.     

应用多光路主动差分光学吸收光谱仪观测大气污染物的空间分布

研制了一套具有4条测量光路的主动差分光学吸收光谱仪(DOAS)系统,以一盏短孤氙灯为4台集成一体的发射/接收望远镜提供光源,可同时发射4条相互独立的测量光路,4台望远镜的角度可分别独立调整以对准不同位置的角反射镜,光路之间的最大发散角可达28°.为测试仪器性能,使4条光路测量同一区域内的NO₂浓度. 对4条光路的测量结果进行相互对比,任意两条光路的相关系数均在0.97以上,测得NO₂的体积分数平均差异小于10^-9, 表明结果具有良好的一致性 关键词： 差分光学吸收光谱 2')" href="#">NO₂ 2')" href="#">SO₂ 大气污染     

近化学计量组分掺铒铌酸锂晶体光学特性研究

用气相输运平衡技术成功地制备出了近化学计量组分的Er∶LiNbO₃晶体,系统 地研究了该 晶体的吸收边移动、可见—红外透射谱、荧光光谱的物理特性.与同成分Er∶LiNbO_{3晶体 相比, 近化学计量组分Er∶LiNbO3晶体的吸收边出现了“蓝移”;OH^{-吸收带明显减弱 ;在可见—近红外波段呈现出更高的透过率;同时Er3+离子的发光强度也明显 提高. 这些结果表明近化学组分的Er∶LiNbO关键词： 近化学组分掺铒铌酸锂晶体 -}吸收带')" href="#">OH^-吸收带 透射谱 荧光光谱}     

Terahertz absorption spectra of nitromethane

Nitromethane, with its heavy frame and internal rotator, readily evaporates into the atmosphere making it an ideal candidate for remote sensing. Here we present the absorption spectra of gas-phase nitromethane between 9 and 50 cm⁻¹. Measurements were taken using a Bruker IFS 66v Fourier transform far-infrared (FTIR) spectrometer at a resolution of 0.12 cm⁻¹ (0.0036 THz) from 9 to 40 cm⁻¹ and a Bruker Vertex 80v FTIR spectrometer with a resolution of 0.0075 cm⁻¹ (0.00226 THz) from 10 to 50 cm⁻¹. The absorption spectra were measured at multiple pathlengths ranging from 2 to 6 m. These measurements were used to calculate the absorption coefficient of nitromethane as a function of wavenumber.     

Influence of post-growth treatment on the optical properties of In:Ce:Cu:LiNbO3 crystals

Congruent In (3 mol%):Ce:Cu:LiNbO₃ crystals have been grown by the Czochralski method in air. Some crystal samples were reduced in Li₂CO₃ power, and others were oxidized in Nb₂O₅ power. The structure of crystals was studied by an infrared transmittance spectrum. The resistance ability to optical damage and the photorefractive properties were measured by light-induced scattering experiments and two-beam coupling, respectively. It has been found that the reduction treatment increased the photoconductivity , which resulted in decreased erasure time and diffraction efficiency, but higher light-induced scattering resistance ability. The oxidation treatment caused the inverse affect. Finally, the nonvolatile holographic recording in In:Ce:Cu:LiNbO3 crystals is realized.     

Studies of the optical spectra and spin-Hamiltonian parameters for the trivalent ytterbium ions in lithium yttrium fluoride crystals

In this paper, the crystal field (CF) levels and spin-Hamiltonian (SH) parameters (g factors g _∥ and g _⊥ and hyperfine structure constants A _∥ and A _⊥) of the rare-earth ion Yb³⁺ in lithium yttrium fluoride crystals are calculated under D _2d point symmetry assumption. Two main methods are used in the calculation to study the SH parameters: one is the perturbation theory method and the other is the complete diagonalization (energy matrix) method (CDM). Comparing the calculated results with the experimental data, we can see that the CDM is more effective to calculate the SH parameters. In addition, the CF J-mixing of all excited-state multiplets into the ground-state multiplet ²F_7/2 is considered. The validity of the calculated results is discussed.     

Theoretical expression for change of extraordinary refractive index in annealed proton exchanged LiNbO3 optical waveguides

A general expression for the change in extraordinary refractive index of the annealed proton exchanged LiNbO₃ waveguide has been deduced. The expression deduced explains the experimental results of decrease in change of extraordinary refractive index with annealing. The effect of annealing time has also been incorporated following Cao's model (Cao, Ramaswamy, Srivastava, J. Lightwave Technol. 10 (1992) 1302–1313). The concentration profile of protons in the annealed waveguide has been deduced theoretically, which is consistent with the previous results. The spontaneous polarization has been considered as the central mechanism for change in extraordinary refractive index due to proton exchange with annealing.     

Implantation as a tool for performing selective materials (application to solar energy conversion)

A selective solar material must absorb most of the solar spectrum, principally the visible light, and reflect the IR light.

Insulators are generally transparent in a wide part of the optical spectrum and the defects are revealed in these crystals by strong absorption bands. On the other hand, metals absorb much of the IR and near IR light and have a large reflection coefficient in the same region of the spectrum. In previous papers^1,2 it has been shown that metallic colloids, formed by precipitation of impurities in insulators, are responsible for a strong absorption band. Such metallic inclusions may be easily produced in most insulators by implantation. According to the nature of the implanted metal a selective absorption can be obtained. So a composite material (cermet) may be performed combining a colloidal absorption in the visible and a metallic reflection. We will discuss the different ways to achieve these properties using direct ion beam implantation.

Various cermets (LiF: Na, Au; MgO: Na, Au) have been studied as function of energy (0.1-1 MeV) and dose (10¹⁶-10¹⁷ ions/cm²). Colloids are completely developed by consecutive annealing.⁴

The modelization of these cermets requires a careful characterization by optical methods (spectrophotometry) and microscopic investigation (TEM, SEM, RBS, SIMS).⁷ These techniques are used to determine the filling factor and the concentration profile of metal in the insulating matrix.

With the help of the Maxwell-Garnett theory and using a single or multilayer model it is possible to suggest an interpretation of the optical properties.     

Assessment of damage ranges by measurements of the refractive index in ion implanted LiNbO3 and LiTaO3

Ion implantation in LiNbO₃ and LiTaO₃ produces radiation damage by nuclear collisions. The amorphisation of the lattice reduces the refractive index of the material. In the case of fast ion bombardment with helium this damage layer is buried below the surface. The refractive index profile which then exists is suitable for an optical waveguide on the surface which supports several modes. Analysis of the refractive index profile yields the damage distribution in the crystal and this in turn can be compared with theoretical estimates of the damage production and ion ranges.

Our analyses show that in the high energy range from 0.5 to 2.0 MeV the depth of the damage is predominantly controlled by the electronic stopping.     

会聚激光扫描铌酸锂晶体写入光波导时的最佳曝光间距

对利用激光精细加工技术在铌酸锂(LiNbO₃)晶体中写入光波导时的最佳曝光间距进行了详细地理论分析和实验研究.通过数值求解简化后的光折变动力学方程组，对会聚激光束沿不同方向扫描晶体时的最佳曝光间距进行了详细的数值模拟.结果表明：最佳曝光间距的选取与写入光束的扫描方向无关；当聚焦激光束平行于光轴扫描晶体时，得不到波导结构，但可以采用“三明治”辐照方式得到对称的折射率分布.采用会聚的绿激光束扫描掺铁铌酸锂(LiNbO₃：Fe)晶体进行了实验研究，晶体中的光致折射率变 关键词： 激光精细加工 最佳曝光间距 光波导 3晶体')" href="#">LiNbO₃晶体     

Anomalous energy loss distributions of alpha particles in heavily implanted thin aluminium films

Anomalous energy loss distributions of ^l48Gd alpha particles have been observed in heavily implanted thin aluminium films. It is surmised that thin film micro-wrinkling is responsible for the observed effect and that the novel technique of energy loss spectral analysis (ELSA) should be useful in studies of the topography of such films.     

Point,linear and extended defect structures in nonstoichiometric rutile

TiO_2-x crystals (0 < x ≤ 0.0035) prepared at 1323 K and given controlled thermomechanica treatment were examined by high-resolution electron microscopy (HREM). Crystallographic shear planes (CSP) were not present in non-deformed specimens quenched from 1323 K but appeared, mostly as closely-spaced pairs, in slowly-cooled or deformed and reduced specimens. Lateral and longitudinal disorder in the fine structure of the CSP, which was strongly dependent upon cooling rate was observed. Platelet defects, approximately parallel to {100}, formed at about 400–600°C. Defects intermediate in size between point defects and CSP were also discovered. In situ observations revealed some details of the mechanisms of formation and dissolution of CSP and platelets.

New interstitial cation structural models were derived using the above observations and electrostatic energy arguments. Linear defects, consisting of two face-shared pairs of octahedra containing trivalent cations are proposed. These have very much lower formation and migration energies than the traditional model. Diffusion mechanisms were derived which allow the linear defects to aggregate and readily form pairs of CSP or platelets without the necessity to nucleate dislocation loops.     

Theoretical explanation of g factors for Ti ions in LiNbO3 and LiTaO3 crystals

The EPR g factors g_// and g_⊥ for Ti³⁺ ions at the trigonal octahedral Li⁺ sites of LiNbO₃ and LiTaO₃ crystals are calculated from the third-order perturbation formulas of g factors for 3d¹ ion in trigonal symmetry. In the calculations, the crystal-field parameters are obtained from the structural data by using the superposition model. The calculated values are in reasonable agreement with the observed values. The results are discussed.     

Application of solid state track recorders for neutron spectra measurements in a reactor irradiation facility

Abstract

In connection with the IAEA-neutron seed irradiation Programme, a standard neutron irradiation facility has been constructed. The application of solid state track recorders for fast neutron spectra measurements inside this facility is discussed. Fissionable targets of ²³⁵U, ²³⁹Pu, ²³⁷Np, ²³⁸W and ²³²Th will be used, an approximative solution for the incident neutron spectrum will be obtained by a five-group method.