Determination and analysis of dispersive optical constants of CuIn3S5 thin films

CuIn₃S₅ thin films were prepared from powder by thermal evaporation under vacuum (10⁻⁶ mbar) onto glass substrates. The glass substrates were heated from 30 to 200 °C. The films were characterized for their optical properties using optical measurement techniques (transmittance and reflectance). We have determined the energy and nature of the optical transitions of films. The optical constants of the deposited films were determined in the spectral range 300-1800 nm from the analysis of transmission and reflection data. The Swanepoel envelope method was employed on the interference fringes of transmittance patterns for the determination of variation of refractive index with wavelength. Wemple-Di Domenico single oscillator model was applied to determine the optical constants such as oscillator energy E₀ and dispersion energy E_d of the films deposited at different substrate temperatures. The electric free carrier susceptibility and the ratio of the carrier concentration to the effective mass were estimated according to the model of Spitzer and Fan.     

Thin films of molecular materials synthesized from C32H20N10M (M = Co, Pb, Fe): Film formation, electrical and optical properties

In this work, the synthesis of molecular materials formed from metallic phthalocyanines and 1,4-phenylenediamine is reported. The powder and thin film (∼80-115 nm thickness) samples of the synthesized materials, deposited by vacuum thermal evaporation, show the same intra-molecular bonds in the IR spectroscopy studies, which suggests that the thermal evaporation process does not alter these bonds. The morphology of the deposited films was studied using scanning electron microscopy (SEM) and atomic force microscopy (AFM) and their optical and electrical properties were studied as well. The optical parameters have been investigated using spectrophotometric measurements of transmittance in the wavelength range 200-1200 nm. The absorption spectra recorded in the UV-vis region for the deposited samples showed two bands, namely the Q and Soret bands. The optical activation energy was calculated and found to be 3.41 eV for the material with cobalt, 3.34 eV for the material including lead and 3.5 eV for the material with iron. The effect of temperature on conductivity was measured for the thin films and the corresponding conduction processes are discussed in this work.     

Enhanced luminescence from spontaneously ordered Gd2O3:Eu based nanostructures

Nanostructured Gd₂O₃:Eu³⁺ and Li⁺ doped Gd₂O₃:Eu³⁺ thin films were prepared by pulsed laser ablation technique. The effects of annealing and Li⁺ doping on the structural, morphological, optical and luminescent properties are discussed. X-ray diffraction and Micro-Raman investigations indicate a phase transformation from amorphous to nanocrystalline phase and an early crystallization was observed in Li⁺ doped Gd₂O₃:Eu³⁺ thin films on annealing. AFM images of Li⁺ doped Gd₂O₃:Eu³⁺ films annealed at different temperatures especially at 973 K show a spontaneous ordering of the nanocrystals distributed uniformly all over the surface, with a hillocks (or tips) like self-assembly of nanoparticles driven by thermodynamic and kinetic considerations. Enhanced photoemission from locations corresponding to the tips suggest their use in high resolution display devices. An investigation on the photoluminescence of Gd_2−xEu_xO₃ (x=0.10) and Gd_2−x−yEu_xLi_yO₃ (x=0.10, y=0.08) thin films annealed at 973 K reveals that the enhancement in luminescence intensity of about 3.04 times on Li⁺ doping is solely due to the increase in oxygen vacancies and the flux effect of Li⁺ ions. The observed decrease in the values of asymmetric ratio from the luminescence spectra of Li⁺ doped Gd₂O₃:Eu³⁺ films at high temperature region is discussed in terms of increased EuO bond length as a result of Li⁺ doping.     

Electrical and optical properties of thermally-evaporated thin films from A2[TiO(C2O4)2] (A = K, PPh4) and 1,8-dihydroxyanthraquinone

In this work, the synthesis of molecular materials formed from A₂[TiO(C₂O₄)₂] (A = K, PPh4) and 1,8 dihydroxyanthraquinone is reported. The synthesized materials were characterized by atomic force microscopy (AFM), infrared (IR) and ultraviolet-visible (UV-vis) spectroscopy. IR spectroscopy showed that the molecular-material thin-films, deposited by vacuum thermal evaporation, exhibit the same intra-molecular vibration modes as the starting powders, which suggests that the thermal evaporation process does not alter the initial chemical structures. Electrical transport properties were studied by dc conductivity measurements. The electrical activation energies of the complexes, which were in the range of 0.003-1.16 eV, were calculated from Arrhenius plots. Optical absorption studies in the wavelength range of 190-1090 nm at room temperature showed that the optical band gaps of the thin films were around 1.9-2.3 eV for direct transitions Eg_d. The cubic NLO effects were substantially enhanced for materials synthesized from K₂[TiO(C₂O₄)₂], where χ⁽³⁾ (−3ω; ω, ω, ω) values in the promising range of 10⁻¹² esu have been evaluated.     

Spectroscopic investigations of a novel push-pull azo compound embedded in rigid polymer

A new heterocyclic push-pull azo compound-in-poly(methymethacrylate) (PMMA) film has been made by means of the spin-coating method. The spectroscopic properties of the films have been investigated with the steady-state absorption spectra, and steady-state fluorescence and femtosecond time-resolved fluorescence spectra in the first time, which is an important characteristic for the application of the film. The excited singlet (S₁) state lifetimes for trans and cis isomers of the film at room temperature have been measured. The excited triplet (T₁) state lifetime of cis isomer of the film has been obtained. The electronic structure of the film has been explained. The results show that the aggregate state of the azo molecules greatly influences its absorption spectra.     

Optical inhomogeneity of ZnS films deposited by thermal evaporation

Zinc sulfide (ZnS) films with optical thickness (reference wavelength is 620 nm) ranging from 310 to 1240 nm were deposited on quartz substrates at room temperature by a thermal evaporation system. The structure and morphology of the films were investigated by X-ray diffraction, atomic force microscopy, respectively. The optical properties of the films were determined by in situ transmittance measurements and wideband spectra photometric measurements, respectively. The experimental results show that the films exhibit cubic structure, and the intensity of the (2 2 0) diffraction peak enhances with the increase of optical thickness. Surface grain size and surface roughness increase monotonously with increasing film thickness. Refractive indices and extinction coefficients calculated by in situ transmittance measurements are well consistent with those calculated by wideband spectra photometric measurements. Both the refractive index and packing density of the film increase as the increase of film thickness, which confirms the film is positive inhomogeneous and has an expanding columnar structure. Extinction coefficients of the films increase with increasing film thickness, which results from the increase of surface roughness.     

Effect of some preparative parameters on optical properties of spray deposited iridium oxide thin films

Optical properties of iridium oxide films fabricated by the spray pyrolysis technique (SPT) have been investigated. The transmission and reflection spectra of the sprayed films were measured by using a double-beam spectrophotometer in the wavelength range from 200 to 2500 nm. Influences of the preparative parameters; namely, substrate temperature (350-500 °C) and solution molarity (0.005-0.03 M), on the optical characteristics were examined. The solution molarity of the iridium chloride solution was varied so as to prepare iridium oxide thin films with thicknesses ranging from 160 to 325 nm. Some important characteristics of optical absorption, such as optical dispersion energies, the dielectric constant, the ratio of the number of charge carriers to the effective mass, the single oscillator wavelength, and the average value of the oscillator strength, were evaluated. The value of the refractive index was found to depend on the chemical composition as well as the degree of stoichiometry of IrO₂. The values obtained for the high frequency dielectric constant through two procedures are in the range of 2.8-3.9 and 3.3-4.6 over the relevant ranges of the substrate temperature and solution molarity, respectively. Analysis of the energy dispersion curve of the absorption coefficient indicated a direct optical transition with the bandgap energy ranging between 2.61 and 2.51 eV when the substrate temperature increases from 350 to 500 °C.     

Derivation of the optical constants of spin coated CeO2-TiO2-ZrO2 thin films prepared by sol-gel route

Ternary thin films of cerium titanium zirconium mixed oxide were prepared by the sol-gel process and deposited by a spin coating technique at different spin speeds (1000-4000 rpm). Ceric ammonium nitrate, Ce(NO₃)₆(NH₄)₂, titanium butoxide, Ti[O(CH₂)₃CH₃]₄, and zirconium propoxide, Zr(OCH₂CH₂CH₃)₄, were used as starting materials. Differential calorimetric analysis (DSC) and thermogravimetric analysis (TGA) were carried out on the CeO₂-TiO₂-ZrO₂ gel to study the decomposition and phase transition of the gel. For molecular, structural, elemental, and morphological characterization of the films, Fourier Transform Infrared (FTIR) spectral analysis, X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), cross-sectional scanning electron microscopy (SEM), and atomic force microscopy (AFM) were carried out. All the ternary oxide thin films were amorphous. The optical constants (refractive index, extinction coefficient, band gap) and thickness of the films were determined in the 350-1000 nm wavelength range by using an nkd spectrophotometer. The refractive index, extinction coefficient, and thickness of the films were changed by varying the spin speed. The oscillator and dispersion energies were obtained using the Wemple-DiDomenico dispersion relationship. The optical band gap is independent of the spin speed and has a value of about E_g≈2.82±0.04 eV for indirect transition.     

Terahertz surface plasmon excitation over a bismuth thin film by an electron beam

The excitation of terahertz surface plasma wave (SPW) over bismuth thin film-glass structure by a parallel propagating electron beam is studied. The SPW phase velocity is sensitive to the thickness of bismuth film and it is driven via the Cerenkov resonance. The growth rate for terahertz radiation generation by an electron beam is obtained under small signal approximation.     

Planar quarter wave stacks prepared from chalcogenide Ge-Se and polymer polystyrene thin films

Planar quarter wave stacks based on amorphous chalcogenide Ge-Se alternating with polymer polystyrene (PS) thin films are reported as Bragg reflectors for near-infrared region. Chalcogenide films were prepared using a thermal evaporation (TE) while polymer films were deposited using a spin-coating technique. The film thicknesses, d∼165 nm for Ge₂₅Se₇₅ (n=2.35) and d∼250 nm for polymer film (n=1.53), were calculated to center the reflection band round 1550 nm, whose wavelengths are used in telecommunication. Optical properties of prepared multilayer stacks were determined in the range 400-2200 nm using spectral ellipsometry, optical transmission and reflection measurements. Total reflection for normal incidence of unpolarized light was observed from 1530 to 1740 nm for 8 Ge-Se+7 PS thin film stacks prepared on silicon wafer. In addition to total reflection of light with normal incidence, the omnidirectional total reflection of TE-polarized light from 8 Ge-Se+7 PS thin film stacks was observed. Reflection band maxima shifted with varying incident angles, i.e., 1420-1680 nm for 45° deflection from the normal and 1300-1630 nm for 70° deflection from the normal.     

Optical parameters of epitaxial GaN thin film on Si substrate from the reflection spectrum

A method has been proposed for determining the optical properties of a thin film layer on absorbing substrates. The film optical parameters such as thickness, refractive index, absorption coefficient, extinction coefficient and the optical energy gap of an absorbing film are retrieved from the interference fringes of the reflection spectrum at normal incidence. The envelopes of the maxima of the spectrum E_M and of the minima E_m are introduced in analytical forms to find the reflectance amplitudes at the interfaces and approximate values of the thin film refractive index. Then, the interference orders and film thickness are calculated to get accurate values of the needed optical parameters. There are no complex fitting procedures or assumed theoretical refractive index dispersion relations. The method is applied to calculate the optical properties of an epitaxial gallium nitride thin film on a silicon (1 1 1) substrate. Good agreement between our results and the published data are obtained.     

Consequence of oxidant to monomer ratio on optical and structural properties of Polypyrrole thin film deposited by oxidation polymerization technique

This paper reports the effect of oxidant to monomer (O/M) ratio on optical and structural properties of Polypyrrole (PPy) thin film deposited by chemical oxidation polymerization technique. Noticeable changes have observed in the properties of PPy thin films with O/M ratio. Cauliflower structure have been observed in FE-SEM images, wherein grain size is observed to decrease with increase in O/M ratio. AFM results are in good agreement with FE-SEM results. From FTIR spectra it is found that, PPy is in highly oxidized form at low O/M ratio but oxidation decreased with increase in O/M ratio. Also C–C stretching vibrations of PPy ring is decreased whereas C=C stretching is increased with ratio. Absorption peak around 450 nm corresponds to π–π^⁎ transition and around 800 nm for polarons and bipolarons. The intensity of such peaks confirms the conductivity of PPy, which is observed maximum at low O/M ratio and found to decrease with increase in ratio. Optical band gap (BG) is found to increase from 2.07 eV to 2.11 eV with increase in the O/M ratio.     

Electrospinning fabrication and oxygen sensing properties of Cu(I) complex-polystyrene composite microfibrous membranes

In this paper, a phosphorescent Cu(I) complex of [Cu(POP)(ECI-Phen)]BF₄, where POP=bis[2-(diphenylphosphino)phenyl]ether, and ECI-Phen=1-ethyl-2-(N-ethyl-carbazole-yl-4-)imidazo[4,5-f]1,10-phenanthroline, is incorporated into a polystyrene matrix of polystyrene (PS) to form microfibers membranes. The possibility of using the resulted composite microfibrous membranes as an optical oxygen sensor is explored. Good linearity and short response time are obtained with a sensitivity of 9.8. These results suggest that phosphorescent [Cu(POP)(ECI-Phen)]BF₄ is a promising candidate for oxygen-sensors and PS is an excellent matrix for oxygen sensing material because it owns a large surface-area-to-volume ratio and can supply a homogeneous matrix for probe molecules. Further analysis suggests that the molecular structure of diamine ligand in Cu(I) complexes is critical for sensitivity due to the characteristic electronic structure of excited state Cu(I) complexes.     

Clay induced aggregation of a tetra-cationic metalloporphyrin in Layer by Layer self assembled film

Porphyrins have a general tendency to form aggregates in ultrathin films. Also electrostatic adsorption of cationic porphyrins onto anionic nano clay platelets results in the flattening of porphyrin moieties. The flattening is evidenced by the red-shifting of Soret band with respect to the aqueous solution. In the present communication, we have studied the clay induced aggregation behaviour of a tetra-cationic metalloporphyrin Manganese (III) 5, 10, 15, 20-tetra (4 pyridyl)-21 H, 23 H-porphine chloride tetrakis (methochloride) (MnTMPyP) in Layer-by-Layer (LbL) self assembled film. The adsorption of dye molecules onto nano clay platelets resulted in the flattening of the meso substituent groups of the dye chromophore. In Layer-by-Layer ultrathin film, the flattened porphyrin molecules tagged nano clay platelets were further associated to form porphyrin aggregates. This has been clearly demonstrated from the UV–vis absorption spectroscopic studies. Atomic Force Microscopic (AFM) studies gave visual evidence of the association of organo-clay hybrid molecules in the LbL film.     

Dependence of intermediated noble metals on the optical and electrical properties of ITO/metal/ITO multilayers

Sn doped In₂O₃ (ITO) single layer and a sandwich structure of ITO/metal/ITO (IMI) multilayer films were deposited on a polycarbonate substrate using radio-frequency and direct-current magnetron sputtering process without substrate heating. The intermediated metal films in the IMI structure were Au and Cu films and the thickness of each layer in the IMI films was kept constant at 50 nm/10 nm/40 nm. In this study, the ITO/Au/ITO films show the lowest resistivity of 5.6 × 10⁻⁵ Ω cm.However the films show the lower optical transmission of 71% at 550 nm than that (81%) of as deposited ITO films. The ITO/Cu/ITO films show an optical transmittance of 54% and electrical resistivity of 1.5 × 10⁻⁴ Ω cm. Only the ITO/Au/ITO films showed the diffraction peaks in the XRD pattern. The figure of merit indicated that the ITO/Au/ITO films performed better in a transparent conducting electrode than in ITO single layer films and ITO/Cu/ITO films.     

Effect of environment and heat treatment on the optical properties of RF-sputtered SnO2 thin films

Thin films of SnO₂ were deposited by RF-magnetron sputtering on quartz substrates at room temperature in an environment of Ar and O₂. The XRD pattern shows amorphous nature of the as-deposited films. The optical properties were studied using the reflectance and transmittance spectra. The estimated optical band gap (E_g) values increase from 4.15 to 4.3 eV as the Ar gas content decreases in the process gas environment. The refractive index exhibits an oscillatory behavior that is strongly dependent on the sputtering gas environment. The Urbach energy is found to decrease with increase in band gap. The band gap is found to decrease on annealing the film. The role of oxygen defects is explored in explaining the variation of optical parameters.     

Synthesis and characterisations of Au-nanoparticle-doped TiO2 and CdO thin films

In the present study, pure and gold nanoparticle (Au NP)-doped titanium dioxide (TiO₂) and cadmium oxide (CdO) thin film were prepared by the sol–gel method, and the effect of Au NP doping on the optical, structural and morphological properties of these thin films was investigated. The prepared thin films were characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM) and ultraviolet–visible–near infrared (UV–Vis–NIR) spectra. While the optical band increases from 3.62 to 3.73 for TiO₂ thin films, it decreases from 2.20 to 1.55 for CdO thin films with increasing Au doping concentration. Analysis of XRD indicates that the intensities of peaks of the crystalline phase have increased with the increasing Au NP concentrations in all thin films. SEM images demonstrate that the surface morphologies of the samples were affected by the incorporation of Au NPs. Consequently, the most significant results of the present study are that the Au NPs can be used to modify the optical, structural and morphological properties of TiO₂ and CdO thin films.     

Structural and optical properties of CuSe2 nanocrystals formed in thin solid Cu–Se film

This paper describes the structural and optical properties of Cu–Se thin films. The surface morphology of thin films was investigated by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Formation of Cu–Se thin films is concluded to proceed unevenly, in the form of islands which later grew into agglomerates. The structural characterization of Cu–Se thin film was investigated using X-ray diffraction pattern (XRD). The presence of two-phase system is observed. One is the solid solution of Cu in Se and the other is low-pressure modification of CuSe₂. The Raman spectroscopy was used to identify and quantify the individual phases present in the Cu–Se films. Red shift and asymmetry of Raman mode characteristic for CuSe₂ enable us to estimate nanocrystal dimension. In the analysis of the far-infrared reflection spectra, numerical model for calculating the reflectivity coefficient of layered system, which includes film with nanocrystalite inclusions (modeled by Maxwell-Garnett approximation) and substrate, has been applied.     

Multilayer thin film thickness measurement using sensitivity separation method

This paper, for the first time, proposed a new sensitivity separation (SS) method for measuring thicknesses of multilayer thin-film stack with high efficiency and accuracy. Through the analysis of the relationship between the film parameters and the mean misfit error (MSE), a parameter called sensitivity is defined. With this parameter, an estimated rational thickness is assigned to a layer with lower sensitivity first, and then the layer thickness with high sensitivity is further obtained by optimization techniques. This method will greatly reduce the searching range and increase the iterating efficiency. It is a pretreatment method and it can be used with other optimization methods. Both theory and simulation results are provided in detail. The uncertainty problems are discussed and examples are given to verify the effectiveness of this method.     

Substrate-dependent structure, microstructure, composition and properties of nanostructured TiN films

Titanium nitride films of a thickness of ∼1.5 μm were deposited on amorphous and crystalline substrates by DC reactive magnetron sputtering at ambient temperature with 100% nitrogen in the sputter gas. The growth of nanostructured, i.e. crystalline nano-grain sized, films at ambient temperature is demonstrated. The microstructure of the films grown on crystalline substrates reveals a larger grain size/crystallite size than that of the films deposited on amorphous substrates. Specular reflectance measurements on films deposited on different substrates indicate that the position of the Ti-N 2s band at 2.33 eV is substrate-dependent, indicating substrate-mediated stoichiometry. This clearly demonstrates that not only structure and microstructure, but also chemical composition of the films is substrate-influenced. The films deposited on amorphous substrates display lower hardness and modulus values than the films deposited on crystalline substrates, with the highest value of hardness being 19 GPa on a lanthanum aluminate substrate.