Gelation properties of poly(aryl ether)dendrons bearing long alkyl chains

Poly(aryl ether) dendrons (2) bearing long alkyl chains can undergo physical gelation in various organic solvents, especially alkanes and alcoholic solvents. In contrast, 3,4,5-trialkoxyphenyl derivatives (1), which are the building blocks of the dendrons (2), do not exhibit any gelation properties; thus, revealing the key role of the dendron structure in the aggregation/gelation process. Hansen solubility parameters allow us to gain a detailed understanding of the role of solvent in gelation. Critical gel concentrations, FT-IR spectroscopy, NMR spectroscopy, T _gel measurements, and scanning electron microscopy are used to characterize the gel structures.     

Crystal structure and crystallinity of poly(aryl ether biphenyl ether ketone ketone)

The crystal structure of poly(aryl ether biphenyl ether ketone ketone) (PEDEKK) was determined to comprise a two-chain orthorhombic unit cell with dimensions a = 0.778 nm, b = 0.606 nm and c = 2.375 nm by using wide-angle X-ray diffraction (WAXD). According to the orthorhombic system, the 12 reflections of this polymer were indexed. The crystallite size increases with increasing the crystallization temperature. The results of the degree of crystallinity (W_c,x) calculated from WAXD were compatible with those from density (W_c,d) and calorimetry (W_c,h) measurements.     

Novel poly(aryl ether phthalazinium) ionomers and their properties

The synthesis of N-phenyl phthalazinium salts by condensation of a 1,2-diaroylbenzene with phenylhydrazine is described. This reaction was utilized to prepare novel poly(aryl ether phthalazinium) ionomers by the direct condensation of poly(aryl ether ketone)s with phenylhydrazine. The preparation of poly(aryl ether phthalazinium) ionomers by methylation of poly(aryl ether phthalazine)s is also described. Most of the ionomers are amorphous, thermally stable, and soluble in organic solvents. They can be cast into flexible and strong films. The glass transition temperature of the ionomers ranges from 297 to 363°C, an increase of 12 to 100°C over the corresponding neutral polymers. © 1996 John Wiley & Sons, Inc.     

Poly(oxanorbornenedicarboximide)s dendronized with amphiphilic poly(alkyl ether) dendrons

Attaching dendritically branched side chains to each repeat unit of a linear polymer produces molecular building blocks of nanometer‐sized dimensions called dendronized polymers. The structure of these complex molecular architectures is highly tunable and, therefore, of interest for a wide range of potential applications. The first examples of dendronized polymers prepared by living ring‐opening metathesis polymerization of oxanorbornenedicarboximide macromonomers with poly(alkyl ether) dendrons are reported. Small‐angle X‐ray scattering experiments on bulk samples confirm that the diameter of the individual cylindrical polymers can be tailored by the choice of dendron generation or the length of the hydrocarbon peripheral group. Analysis of the SAXS data based on a core‐shell model indicates that although the diameter of the cylinder increases with generation, the size of the core does not change; this suggests that these dendrons only loosely encapsulate the polymer backbone. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3221–3239     

Polyamido amine dendrimers functionalized with poly(phenylenevinylene) dendrons at their periphery

A series of polyamido amine (PAMAM) dendrimers (Generations 2, 3, 4, and 6) fully functionalized at their periphery with first‐ and second‐generation poly (phenylenevinylene) (PPV) dendrons have been efficiently prepared. MALDI‐TOF mass spectrometry proved to be particularly useful for the characterization of the new hybrid dendrimers as well as for the estimation of the average number of PPV dendrons attached to the surface. The optical absorption and emission properties of these systems were studied. The materials display extremely high molar extinction coefficients and emit blue light with only slightly lower fluorescence quantum yields than the corresponding free dendrons. Self‐quenching interactions between PPV units were not observed in THF. However, the luminescence properties underwent a dramatic change when toluene was used as the solvent. The lower polarity of toluene caused shrinkage of the PAMAM structure and brought the PPV chromophores closer together, leading to self‐quenching interactions and excimer formation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6409–6419, 2009     

A convergent route to poly(phenyl ketone ether) dendrons

A series of poly(phenyl ketone) dendrons have been constructed using a convergent strategy. An aryl fluoro-substituent is deactivated towards nucleophilic substitution by protection of a para-ketone as an acetal. This allows coupling to an activated aryl fluoride.Subsequent deprotection of the acetyl group then activates the first fluoro-substituent and allows the next generation of the dendron to be added. The synthesis of higher generations is complicated by a scrambling reaction, which lowers the yields.     

Thermal chemistry of poly(aryl ether phthalazine)s and the synthesis of poly(aryl ether quinazoline)s

Poly(aryl ether phthalazine)s were found to undergo an exothermic reaction at a temperature range of 360–440°C. We elucidated the origin of the exothermic reaction and the physiochemical phenomena associated with it, based on thermal analyses, model compound studies, and ¹³C solid-state NMR studies. At elevated temperatures, polymers containing a diphenylphthalazine moiety 4 underwent extensive thermal crosslinking reactions as a result of a nitrogen elimination reaction of the phthalazine moiety. However, polymers containing the tetraphenyl or hexaphenyl phthalazine moiety 5 and 6 were found to undergo principally a backbone rearrangement reaction, in which the phthalazine moiety rearranged to a quinazoline. Utilizing this efficient thermal rearrangement of polyphenylated phthalazines, we have prepared a novel activated difluoride, 2,4-bis(4-fluorophenyl)-,5,6,7,8-tetraphenylquinazoline 9d, which underwent high-temperature solution polycondensation with BPA to give the quinazoline containing poly(aryl ether) 14. Polymer 14 is amorphous, has a glass transition temperature of 264°C, and has high thermooxidative stability with 5% weight loss being recorded at 514°C in nitrogen. © 1996 John Wiley & Sons, Inc.     

Polymer-polymer miscibility in blends of a new poly(aryl ether ketone) with poly(ether imide)

Polymer miscibility was found for a blend system comprising of a new poly(aryl ether ketone) and a poly(ether imide). Phase homogeneity was preliminarily confirmed using optical and scanning electron microscopy, indicating that the scales of phase homogeneity in the blends were beyond the resolution limits of either microscopy. A composition-dependent, single glass transition temperature (T_g) in the PAEK/PEI blends within the full range of composition was observed using differential scanning calorimetry (DSC). The thermal transition breadth also suggests that the scales of mixing are fine and uniform.     

Synthesis of poly(alkyl aryl ether) dendrimers

Poly(alkyl aryl ether) dendrimers of up to four generations composed of a phloroglucinol core, branching components, and pentamethylene spacers are synthesized by a divergent growth methodology. A repetitive synthetic sequence of phenolic O-alkylation and O-benzyl deprotection reactions are adopted for the synthesis of these dendrimers. The peripheries of the dendrimers contain 6, 12, 24, and 48 phenolic hydroxyl groups, either in the protected or unprotected form, for the first, second, third, and fourth generations, respectively. Because of the presence of hydrophilic exterior and relatively hydrophobic interior regions, alkaline aqueous solutions of these dendrimers are able to solubilize an otherwise insoluble pyrene molecule and these supramolecular complexes precipitate upon neutralization of the aqueous solutions.     

Designing poly(amido amine) dendrimers containing core diversities by click chemistry of the propargyl focal point poly(amido amine) dendrons

General, fast, efficient, and inexpensive methods for the synthesis of poly (amido amine) (PAMAM) dendrimers having core diversities were elaborated. In all syntheses, the major step involved an inexpensive 1,3‐dipolar cycloaddition reaction between an alkyne and an azide in the presence of Cu(I) species, which is known as the best example of click chemistry. The propargyl‐functionalized PAMAM dendrons are obtained by the divergent approach using propargylamine as an alkyne‐focal point. Three core building blocks, 1,3,5‐tris(azidomethyl)benzene, N,N,N′,N′‐tetra(azidopropylamidoethyl)‐1,2‐diaminoethane, and 4,4′‐(3,5‐bis(azidopropyloxy)benzyloxy)bisphenyl, were designed and synthesized to serve as the azide functionalities for dendrimer growth via click reactions with the alkyne‐dendrons. These three building blocks were employed together with the propargyl‐functionalized PAMAM dendrons in a convergent strategy to synthesize three kinds of PAMAM dendrimers with different core units. This novel and pivotal strategy using an efficient click methodology provides the fast and efficient synthesis of the PAMAM dendrimers with the tailed made core units. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1083–1097, 2008     

Novel fluorinated poly(aryl ether ketone)s

Two novel fluorinated monomers were prepared and polymerized with biphenols to produce amorphous, thermally stable poly(aryl ether ketone)s. The properties of the fluorinated polymers are compared to those of unfluorinated, amorphous poly(aryl ether ketone)s. The presence of fluorine in the polymers was found to cause a decrease in glass transition temperature and Young's moduli, however, no increase in thermal stability was observed. The fluorinated polymers are soluble in common organic solvents such as chloroform and methylene chloride at room temperature, and also show solubility in solvents containing a ketonic moiety, such as acetone. Evidence of polymer branching through fluorines considered to be unreactive under the polymerization conditions was found. Efforts were made to evaluate the reactivity of fluorine atoms under the polymerization conditions using both molecular modeling and ¹⁹F-NMR to ascertain if such branching could be avoided. © 1995 John Wiley & Sons, Inc.     

Highly phenylated poly(aryl ether phthalazine)s

Two series of novel amorphous poly(aryl ether phthalazine)s have been prepared via an intramolecular ring closure reaction of poly(aryl ether ketone)s (PAEKs) with hydrazine monohydrate. Fluorinated PAEKs, which display solubility in solvents incorporating a ketone functionality such as acetone or ethyl acetate, were converted to poly(aryl ether phthalazine)s to observe if these polymers would display similar solubility characteristics. The poly(aryl ether phthalazine)s have glass transition temperatures in the range of 278–320°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. The fluorinated poly(aryl ether phthalazine)s were not soluble in ketonic solvents. A series of poly(aryl ether phthalazine)s incorporating pendant 2-naphthalenyl moieties has been prepared in an attempt to produce amorphous, thermally stable polymers with high glass transition temperatures. The polymers have glass transition temperatures in the range of 287–334°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. Poly(aryl ether phthalazine)s undergo an exothermic reaction above the glass transition temperature. The major product of this reaction is a rearrangement of the phthalazine moieties to quiazoline moieties, however some crosslinking of the polymers occurs. Cured samples of the poly(aryl ether phthalazine)s show a small increase in the polymer T_g and are insoluble in all solvents tested. © 1996 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 34:1897–1905, 1996     

New accelerated strategy for the synthesis of poly(ether ketone) dendrons

A new AB(4)-type hypermonomer with four activated aromatic fluorines was prepared and converted to hyperbranched poly(ether ketones) by nucleophilic aromatic substitution of these fluorine atoms with phenolates. The preparation and application of the AB(4) hypermonomer for the accelerated synthesis of a family of poly(ether ketone) dendrons G2-G4 in good yield are described.     

Thermal behavior and phase behavior in blends of liquid crystalline poly(aryl ether ketone) and poly(aryl ether ether ketone) containing thioether units

Thermal behavior and phase behavior in blends of liquid crystalline poly(aryl ether ketone) with lateral methoxy groups (M-PAEK) and poly(aryl ether ether ketone) containing thioether units (S-PEEK) have been investigated by differential scanning calorimetry (DSC) and polarized light microscopy (PLM) techniques. The results indicate that the composition of the blends has great effect on the phase behavior and morphology. Thin films of pure M-PAEK and S-PEEK crystallized from the melts exhibit typical mosaic and spherulitic structures, respectively. For the blends with higher M-PAEK contents (> 50%), an unusual ring-banded spherulite with structural discontinuity is formed. The bright core and rings of the ring-banded spherulites under PLM are composed of M-PAEK phase, while the dark rings consist mainly of S-PEEK phase. For the 50:50 M-PAEK/S-PEEK blend, the ring-banded spherulites and S-PEEK spherulites coexist, which implies that a partial phase separation between the two components takes place in the melting state. In S-PEEK-rich blends, a volume-filled spherulite is produced. In addition, the effect of isothermal crystallization temperature on the phase behavior, especially the ring-banded spherulite formation in the blends, is discussed.     

Isomorphic behavior of poly(aryl ether ketone) blends

Blends of various poly(aryl ether ketones) have been found to exhibit a range of miscibility and isomorphic behavior. This range is dependent on molecular weight; however, for poly(aryl ether ketones) with number-average molecular weight of 20,000, this range is about ±25% difference in ketone content. All miscible blends exhibit isomorphism, and all immiscible blends exhibit no evidence of isomorphism. The dependence of the glass transition temperature T_g versus composition exhibits a minimum deviation from linearity whereas the melting temperature T_m versus composition exhibits a pronounced maximum deviation from linear behavior. The crystalline melting point versus composition for isomorphic blends is considerably different than for random copolymers with isomorphic units. Homopolymers and random copolymers exhibit a melting point that is a linear function of ketone content (increasing ketone content increases T_m). For blends, the melting point is essentially the same as that of the higher melting constituent until high levels of the lower melting constituent are present. The observed melting point versus composition behavior will be interpreted using classical theory to calculate the components of the liquid and crystalline phase compositions. As a miscible blend is cooled from the melt, essentially pure component of the highest melting point crystallizes out of solution, as predicted by calculated solid-liquid phase diagrams. This occurs until the crystallization is complete owing to spherulitic impingement. At high concentrations of the lower melting constituent, lower melting points will be observed because the highest melting constituent will be depleted before the crystallization is complete. In many miscible blends involving addition of an amorphous polymer to a crystalline polymer, the degree of crystallinity of the crystalline polymer has been shown to increase. On the basis of evidence presented here, it is hypothesized that dilution by a miscible, amorphous polymer allows for a higher level of crystallinity.     

Stress-enhanced transport of toluene in poly aryl ether ether ketone (PEEK)

The transport of fluids in the semicrystalline polymer, poly(aryl ether ether ketone) (PEEK), was investigated. Both solubility and rate of penetration of toluene into PEEK are markedly increased by the application of an external stress. The induction period (i.e., the time for the sorption to begin) is a function of applied stress as well as temperature and crystallinity. At 22°C in 29% crystalline PEEK the induction period was reduced from more than 2000 h to approximately 10 h whereas the solubility of toluene was increased from 9 to 44 wt % upon the application of an external tensile stress of 30 MPa. A critical stress (i.e., a stress value below which the stress-enhanced effects are not observed) was determined. The critical stress is a strong function of crystallinity and temperature. © 1996 John Wiley & Sons, Inc.     

Synthesis of azide-functionalized PAMAM dendrons at the focal point and their application for synthesis of PAMAM-like dendrimers

For the first time, the divergent synthesis of azide-functionalized PAMAM dendrons using azidopropyl amine as an azide focal point and convergent synthesis of symmetric PAMAM-like dendrimers containing 1,2,3-triazole rings as connectors via click chemistry with a dialkyne core is described.     

Syntheses and structures of bowl-shaped triarylphosphines and their palladium(II) complexes

Novel bowl-shaped triarylphosphines, tris(2,2″,6,6″-tetraalkyl[1,1′:3′,1″-terphenyl]-5′-yl)phosphines (TRMP: alkyl = methyl; TRIP: alkyl = isopropyl), were prepared by lithiation of the corresponding m-terphenyl bromides followed by reaction with PCl₃. X-ray crystallographic analysis revealed that the phosphorus center of TRMP is embedded in the shallow bowl-shaped cavity of 16 Å diameter and 2.1 Å depth formed by three radially extended m-terphenyl units. Its cone angle was estimated to be as large as 174°. In the crystal structure of TRIP, the depth of the cavity and cone angle increased to 3.3 Å and 206°, respectively, because of the different arrangement of the m-terphenyl units. In contrast with TRMP, which can form the mononuclear complex, PdCl₂(TRMP)₂ (6), in the reaction with PdCl₂, treatment of TRIP (1 or 3 eq.) with PdCl₂ produced the trinuclear palladium(II) chloride complex, [(PdCl₂)₃(TRIP)₂] (8), as a single product. X-ray crystallography established the structure of 8, where the trimer of PdCl₂ is terminated by two TRIP ligands. The formation of the different types of PdCl₂ complexes was explained in terms of the difference in the cavity shape of TRMP and TRIP.     

Synthesis and properties of poly(aryl ether ether ketone) copolymers with pendant methyl groups

Polyether ether ketone and polyether ether ketone copolymers were prepared by the nucleophilic substitution reaction of 4,4′-difluorobenzophenone with hydroquinone and with varying mole proportions of hydroquinone and methyl hydroquinone using sulfolane solvent in the presence of anhydrous K₂CO₃. The polymers were characterised by different physico-chemical techniques. The crystallinity of the polymers was found to decrease with increase in concentration of the methyl hydroquinone units in the polymer. Thermogravimetric studies showed that all the polymers were stable upto 430 °C with a char yield above 49% at 900 °C in N₂ atmosphere. The glass transition temperature was found to increase and the crystalline melting temperature and activation energy were found to decrease with increase in concentration of the methyl hydroquinone units in the polymer.