Mixed Monolayers of Amphiphilic Cyclodextrins and Phospholipids: I. Miscibility under Dynamic Conditions of Compression

The miscibility of per-(6-amino-2,3-di-O-hexyl) β-CD hydrochloride salt abbreviated NH₃-β-CD-OC6 with 1,2 dipalmitoyl, 3-sn-phosphatidyl choline (DPPC) and 1,2 dipalmitoyl, 3-sn-phosphatidic acid (DPPA) and of per-(6-dodecanoylamino-6-deoxy) β-CD abbreviated C₁₁CONH-β-CD with DPPC has been assessed by surface pressure–area experiments under dynamic conditions. The determination of their mixing behavior has been approached by thermodynamic characterization derived from a comparison of the composition dependence of collapse pressure, for various contents of two components in monolayers, with that predicted from a model of ideal mixing. Component miscibility has additionally been addressed by the use of the Smaby–Brockman state equation for liquid-expanded monolayers which characterizes interaction between monolayer components using the water activity coefficient. While for both NH₃-β-CD-OC6–DPPC and NH₃-β-CD-OC6–DPPA systems the average surface areas followed the additivity rule, for the latter system surface pressures at collapse significantly deviated from ideality. The occurrence of an interaction at the level of oppositely charged polar groups of NH₃-β-CD-OC6 and DPPA was also demonstrated by the nonideal composition dependence of the water activity coefficient (f₁) characterizing the interfacial water. The mixing energies and interaction parameters at collapse pressures were calculated using the Joos approach. Positive values of these factors indicated that NH₃-β-CD-OC6 and DPPA mixed films were thermodynamically less stable than the films in which ideal mixing of components occurred. The mixing of NH₃-β-CD-OC6 with DPPC appeared to be almost ideal. In the case of the C₁₁CONH-β-CD–DPPC system, analysis according to both the Joos and Goodrich approaches showed the occurrence of an important interaction which resulted in negative mixing energies characteristic of thermodynamically stable mixed films.     

Molecular Interactions in Mixed Monolayers of Octadecanoic Acid and Three Related Amphiphiles

Binary mixed monolayers of octadecanoic acid and three related amphiphilic compounds (octadecanamide, octadecylamine, octadecylurea) have been investigated at the air/water interface by surface pressure–area (Π–Â) isotherms and their resistances to water evaporation (r). In addition, the excess free energies of mixing (ΔG^E) were calculated using the Goodrich method. Both the ln r vs x and ΔG^E vs x plots exhibit marked deviations from linearity, indicating a high degree of miscibility and nonideal behavior of the components in the mixed films. For all of these binary systems the excess free energies of mixing have been found to be minimum for a certain composition corresponding almost to a maximum in evaporation resistances. Weak interactions were detected in octadecanoic acid/octadecanamide monolayers, whereas significant condensation effects were observed in 1 : 1 mixed films containing octadecanoic acid and octadecylamine. This is attributed to an acid–base equilibrium followed by the formation of a well-ordered arrangement of COO⁻ and NH₃⁺ head groups bound to each other by electrostatic forces. The unusual polymorphism of octadecylurea monolayers could be influenced by adding small amounts of octadecanoic acid. The formation of the low-temperature phase (β-phase) is completely suppressed, if the acid content exceeds 8 mol%. The octadecanoic acid seems to induce the formation of the high-temperature phase (α-phase), which is characterized by a vertical orientation of the hydrocarbon chains.     

The stereochemistry of the dichlorocobalt(III) complexes with (2S,5S,9S)- and (2S,5R,9S)-trimethyltriethylenetetraamines

Dichlorocobalt(III) complexes of (2S,5S,9S)-trimethyltriethylenetetraamine (L₁) and (2S,5R,9S)-trimethyltriethylenetetraamine (L₂) have been prepared. Both L₁ and L₂ coordinate to the cobalt(III) ion to give three isomers: Λ-cis-α, Δ-cis-β, trans isomers for L₁ and Δ-cis-α, Δ-cis-β, trans isomers for L₂. Each of the trans-dichloro complexes of the two ligands have been isomerized stereospecifically to the cis-α-dichloro complex in methanol, and each of the cis-α-dichloro complexes stereospecifically to the trans-diaqua complex in water. Both the geometrical and optical inversions took place at the same time in the observed stereospecific isomerizations.     

Characterization of anomeric differences of ammonium-bound monomeric and dimeric complex ions of 1α- and 1β-azido-pentofuranosyl derivates by kinetic method

Relative stabilities (ΔG^c) of ammonium-bound monomers and dimers of anomeric β- -pentofuranosyl 1α- and 1β-azide derivates are determinate using the kinetic method by measuring relative rates of competitive collision-induced dissociations of dimeric [ANH₄B]⁺ and trimeric [A₂NH₄B]⁺ or [ANH₄B₂]⁺ cluster ions. Comparison between calculated ammonium affinities (AAs) and relative stabilities (ΔG^c) of ammonium-bound monomers shows qualitative correlations between both thermochemical quantities, but in two examples the activation barrier differences of competitive fragmentation channels cause a large disparity between both thermochemical data. Therefore, the most stable ammonium-bound monomers of the anomeric lα- and lβ-2,3,5-tri-O-benzyl-β- -arabino-pento-furanosyl azides possess the lowest ammonium affinities and the highest relative stabilities. Two different relative stabilities measured for the same ammonium-bound homo- or hetero-dimers indicate dissimilar activated barriers of trimers transition states for dimer formations. The activated barriers of trimers depend on the relative stabilities of ammonium-bound monomer within the trimeric cluster ions.     

Synthesis of [(μ-RS)(μ-S){Fe2(CO)6}2(μ4-S)] and their reactivity toward electrophiles

Reaction of the Et₃NH⁺ salts of the [(μ-RS)(μ-CO)Fe₂(CO)₆]⁻ anions (R=Bu^t, Ph or PhCH₂) with (μ-S₂)Fe₂(CO)₆ gives reactive intermediates [(μ-RS)(μ-S){Fe₂(CO)₆}₂(μ₄-S)]⁻. Reactions of the latter with alkyl halides, acid chlorides and Cp(CO)₂FeI have been studied. X-Ray structure of (μ-Bu^tS)(μ-PhCH₂S)[Fe₂(CO)₆]₂(μ₄-S) was determined.     

Polymerisations of -caprolactone and β-butyrolactone with Zn-, Al- and Mg-based organometallic complexes

The reaction of EtAlCl₂ with 1,2-{LiN(PMes₂)}₂C₆H₄ (Mes = 2,4,6-Me₃C₆H₂) and of butyloctylmagnesium with 1,2-{NH(PPh₂)}₂C₆H₄ gave [AlEt(1,2-{N(PMes₂)}₂C₆H₄-κ²N,N′)(THF)] (1) and [Mg(1,2-{N(PPh₂)}₂C₆H₄-κ²N,N′)(THF)₂] (2), respectively. Complexes 1 and 2 were fully characterised by NMR (¹H, ¹³C, ³¹P) and IR spectroscopy and mass spectrometry. Complexes 1 and 2 were employed as catalysts in the polymerisation of -caprolactone, which produced polymers with a narrow molecular weight distribution. For comparison the polymerisations of -caprolactone and β-butyrolactone were carried out with the Zn complex [ZnPr{1-N(PMes₂)-2-N(PHMes₂)C₆H₄-κ²N,N′}] (3) as catalyst, which produced polymers with narrow molecular weight distributions and high molecular weights.     

A platina-allenyl ligand coordinated to a triosmium cluster: X-ray structure of the acetylide complex Os3Pt(μ-H)(μ4-η-CCPh)(CO)10(PCy3)

The spiked triangular triosmium-platinum cluster complex Os₃Pt(μ-H)(μ₄-η²-CCPh)(CO)₁₀(PCy₃) has been synthesised by treatment of the unsaturated Os₃Pt(μ-H)₂(CO)₁₀(PCy₃) with LiCCPh followed by protonation. Crystallographic analysis reveals an unusual twisted configuration of the μ₄-η²-CCPh ligand about the triosmium framework such that the complex may be regarded as a platina-allenyl moiety coordinated to an Os₃(μ-H)(CO)₉ unit.     

A novel method for the synthesis of (Z)-α-selenyl-α,β-unsaturated ketones via acylation of (E)-α-selanylvinylstannanes

The (E)-α-selenylvinylstannanes react with acyl halides in presence of a catalytic amount of Pd(PPh₃)₄ to give the corresponding (Z)-α-selenyl-α,β-unsaturated ketones in good yield.     

Reactivity modes of bridged bimetallic [(η-C5H5)Fe(CO)]2-μ-dppe with electrophiles. Preparation and reactions of bimetallic hydride complexes

The complex [(η⁵-C₅H₅)Fe(CO)]₂-μ-dppe (dppe = ethane-1,2-bisdiphenylphosphide) (I) reacts with electrophiles through a η-CO and forms Lewis acid O-Adducts with alkylating reagents (giving cationic μ₂-alkoxycarbyne compounds) or with alkulaluminum compounds. Treatment of I with acid affords a stable μ₂-hydride salt (IV), [CpFe(CO)]₂(μ₂-dppe)⁺, which serves as an intermediate in the stepwise hydrogenation (reversibly) of I to a bridged bimetallic dihydride, [CpFe(CO)H]₂-μ₂-dppe. This dihydride serves as a hydride donor, regenerating IV, towards Ph₃c⁺ or CpFe(CO)₂(η²-CH₂---CH₂)⁺ hydride acceptors. The necessity of the μ₂-dppe as a “mechanical linkage” in facilitating some bimetalic reactions is also established.     

Langmur monolayers of cerebroside with different head groups originated from sea cucumber: Binary systems with dipalmitoylphosphatidylcholine (DPPC)

Surface properties (Langmuir monolayer) of two different cerebrosides which are extracted from the sea cucumber (Bohadschia argus) were investigated. A main difference in chemical structure of cerebroside between BAC-2a and BAC-4 is their head groups (glucose and galactose, respectively). Furthermore, miscibility and interaction between dipalmitoylphosphatidylcholine (DPPC) and cerebrosides (BAC-2a and BAC-4) in the monolayer have been systematically examined. The surface pressure (π)−area (A), the surface potential (ΔV)−A, and the dipole moment (μ)−A isotherms for monolayers of DPPC, cerebrosides, and their binary combinations have been measured using the Wilhelmy method and the ionizing electrode method. BAC-4 forms a stable liquid-expanded (LE) monolayer, whereas BAC-2a has a first-order phase transition from the LE phase to the liquid-condensed (LC) state on 0.15 M NaCl at 298.2 K. The fundamental properties for each cerebroside monolayer were elucidated in terms of the surface dipole moment based on the three-layer model [R.J. Demchak, T. Fort Jr., J. Colloid Interface Sci. 46 (1974) 191–202] for both cerebrosides and the apparent molar quantity change (Δs^γ, Δh^γ, and Δu^γ) for BAC-2a. In addition, their miscibility with DPPC was examined by the variation of the molecular areas and the surface potentials as a function of cerebroside mole fractions, the additivity rule. The miscibility was also confirmed by constructing the two-dimensional phase diagrams. The phase diagrams for the both binary systems were of negative azeotropic type. That is, the two-component DPPC/BAC-2a and DPPC/BAC-4 monolayers are miscible. Furthermore, the Joos equation for the analysis of the collapse pressure of binary monolayers allowed calculation of the interaction parameter and the interaction energy between the DPPC and cerebroside monolayers. The miscibility in the monolayer state was also confirmed by the morphological observation with Brewster angle microscopy (BAM), fluorescence microscopy (FM), and atomic force microscopy (AFM).     

The insertion of acetylene into the formal ruthenium-phosphorus bonds of closo-[Ru4(μ4-PPh)2(μ2-CO)(CO)10. Crystal structure of [Ru4(μ4-PPh){μ4-η-P(Ph)CHCH}(μ2-CO)(CO)10]

Treatment of closo-[Ru₄(μ₄-PPh)₂(μ₂-CO)(CO)₁₀] with acetylene under ambient conditions leads to the insertion of the acetylene into the skeletal framework of the cluster and the formation of [Ru₄(μ₄-PPh){μ₄-η³-P(Ph)CHCH}(μ₂-CO)(CO)₁₀], the structure of which has been determined X-ray crystallographically.     

Synthesis, characterization and electrochemical studies of the heterometallic diclusters [{Fe2(μ-CO)(CO)6(μ-PPh2)Au}2(diphosphine)] (diphosphine=dppm, dppip, dppe, dppp)

Treatment of [(ClAu)₂(diphosphine)] {diphosphine=bis(diphenylphosphino)methane (dppm), bis(diphenylphosphino)isopropane (dppip), 1,2-bis(diphenylphosphino)ethane (dppe), 1,3-bis(diphenylphosphino)propane (dppp)} with two equivalents of the anion [Fe₂(μ-CO)(CO)₆(μ-PPh₂)]⁻ in the presence of TlBF₄ gives the new heterometallic diclusters [{Fe₂(μ-CO)(CO)₆(μ-PPh₂)Au}₂(diphosphine)] that have been isolated and characterized. Their ³¹P-NMR spectra show different patterns as a function of the diphosphine ligand. The electrochemical behavior of these compounds has been investigated and compared with that of the mono- [Fe₂(μ-CO)(CO)₆(μ-PPh₂)(μ-AuPPh₃)] and tricluster [{Fe₂(μ-CO)(CO)₆(μ-PPh₂)Au}₃(triphos)] derivatives.     

New series of platinum group metal complexes bearing η- and η-cyclichydrocarbons and Schiff base derived from 2-acetylthiazole: Syntheses and structural studies

The mononuclear complexes [(η⁶-arene)Ru(ata)Cl]PF₆ {ata = 2-acetylthiazole azine; arene = C₆H₆ [(1)PF₆]; p-ⁱPrC₆H₄Me [(2)PF₆]; C₆Me₆ [(3)PF₆]}, [(η⁵-C₅Me₅)M(ata)]PF₆ {M = Rh [(4)PF₆]; Ir [(5)PF₆]} and [(η⁵-Cp)Ru(PPh₃)₂Cl] {η⁵-Cp = η⁵-C₅H₅ [(6)PF₆]; η⁵-C₅Me₅ (Cp^*) [(7)PF₆]; η⁵-C₉H₇ (indenyl); [(8)PF₆]} have been synthesised from the reaction of 2-acetylthiazole azine (ata) and the corresponding dimers [(η⁶-arene)Ru(μ-Cl)Cl]₂, [(η⁵-C₅Me₅)M(μ-Cl)Cl]₂, and [(η⁵-Cp)Ru(PPh₃)₂Cl], respectively. In addition to these complexes a hydrolysed product (9)PF₆, was isolated from complex (4)PF₆ in the process of crystallization. All these complexes are isolated as hexafluorophosphate salts and characterized by IR, NMR, mass spectrometry and UV–Vis spectroscopy. The molecular structures of [2]PF₆ and [9]PF₆ have been established by single-crystal X-ray structure analyses.     

Influence of coordination on N-H X hydrogen bonds. Part II. Zn(NH3)2Br2 and Ni(NH3)2X2 (X is Cl and Br)

Microcrystalline samples of Zn(NH₃)₂Br₂ and Ni(NH₃)₂X₂ (X is Cl⁻ and Br⁻) have been investigated from 100 to 293 K using X-ray diffraction and IR spectroscopy measurements (range 400–4000 cm⁻) performed with isotopically dilute (5% deuterated) samples. Values of Δν(ND)/ΔT for all compounds hint at the existence of hydrogen bonds. Zn(NH₃)₂Br₂ shows The dynamics of ammonia molecules even at 100 K, and no indications are apparent that dynamic disorder of ammonia molecules takes place in Ni(NH₃)₂X₂ (X is Cl⁻ and Br⁻). A comparison between octahedrally coordinated ammoniates [Ni(NH₃)₆]Br₂, Ni(NH₃)₂Br₂ and [Zn(NH₃)₆]Br₂ with tetrahedrally coordinated ones [Zn(NH₃)₂Br₂] leads to the conclusion that the lower coordination number increases the strength of the hydrogen bonds. Because this effect is small, it is not possible to separate the influence of the type of coordinating ions for one coordination number from the influence of the coordination number itself.     

Volumetric and transport properties of binary liquid mixtures of N-methylacetamide with lactones at temperatures (303.15 to 318.15) K

The values of density (ρ), viscosity (η) and speed of sound (u) have been measured for binary liquid mixtures of γ-butyrolactone (GBL), δ-valerolactone (DVL), and ε-caprolactone (ECL) with N-methylacetamide (NMA) over the whole composition range at T = (303.15 to 318.15) K and atmospheric pressure. From these data, excess molar volume (V^E), deviation in viscosity (Δη), and deviation in isentropic compressibility (Δκ_s), are calculated. The results are fitted to a Redlich–Kister type polynomial equation to derive binary coefficients and standard deviations.     

pH-Directed assembly and magnetic properties of two polynuclear Mn complexes: (Δ, Λ)-{Mn3(phen)2(OOCCH3)6} and 1-D [Mn(phen)Cl2]n

When the reaction conditions are deliberately controlled by the pH, two different polynuclear manganese complexes, (Δ, Λ)-{Mn₃(phen)₂ (CH₃COO)₆} (1) and [Mn(phen)Cl₂]_n (2) (phen = 1,10-phenanthroline), have been synthesized from the same raw materials. The structural analyses show that 1 has a structure formed by neutral chiral linear trinuclear molecules, while 2 has a structure consisting of one-dimensional infinite chains. A study of the temperature dependent magnetic susceptibilities reveal that 1 is an antiferromagnetically coupled trimer molecule while 2 shows ferromagnetic interactions within the chain.     

Self-consistent-field-Xα-scattered-wave molecular orbital calculation of [CpMoS(μ-S)]2, a molecule that undergoes a photochemically induced isomerization

A self-consistent-field-Xα-scattered-wave molecular orbital calculation was carried out on the [CpMoS(μ-S)]₂(Cp = η⁵-C₅H₅) complex. The calculated results were used to rationalize the observed photochemical isomerization of the title complex to [CpMo(μ-S)][μ-S₂]. It is proposed that a terminal sulfur (S_t) → Mo charge-transfer excitation is responsible for the isomerization, which is an intramolecular redox; i.e. Mo(V) is reduced to Mo(IV) and S²⁻ is oxidized to S₂²⁻ , a result consistent with the charge-transfer character of the excitation. Specifically, the transition responsible for the isomerization is proposed to be 16b_u → 18a_g (¹A_g → ¹B_u). The 18a_g orbital is primarily Mo in character but it is also Mo---S_t π-antibonding; cleavage of the Mo---S_t π-bond facilitates the isomerization.     

New results in the ammonolysis of hexafluoro-cyclo-triphosphazene: Crystal structure of P3N3F5–NH–P3N3F4NH2

The reaction of hexafluoro-cyclo-triphosphazene P₃N₃F₆ with ammonia in acetonitrile has been studied. New compounds, (2-imino-2,4,4,6,6-pentafluoro-2λ⁵,4λ⁵,6λ⁵-cyclo-triphosphaza-1,3,5-trienyl)-2-amino-4,4,6,6-tetrafluoro-2λ⁵,4λ⁵,6λ⁵-cyclo-triphosphaza-1,3,5-triene, P₃N₃F₅–NH–P₃N₃F₄NH₂ (2) and cis and trans isomers of non-gem-2,4-diamino-2,4,6,6-tetrafluoro-2λ⁵,4λ⁵,6λ⁵-cyclo-triphosphaza-1,3,5-triene, P₃N₃F₄(NH₂)₂ (4, 5)_, were detected by GC/MS, and ³¹P NMR spectroscopy in reaction mixtures. X-ray diffraction analysis of P₃N₃F₅–NH–P₃N₃F₄NH₂ (2) revealed two conformational polymorphs, 2A and 2B, the latter being built up of two different conformers that were further denoted as 2B_a (the same as the single conformer in 2A) and 2B_b. The compound 2 was characterized by spectroscopic methods and its 2D potential energy surface (PES) was described by density functional theory computations depending on two dihedral angles. The calculated PES spans over 30 kJ/mol in energy including 8 local minima and all first and second order saddle points. The occurrence of the two experimentally observed conformers 2B_a and 2B_b seems to be governed by crystal packing effects.     

Characterization and determination of genipin-1-β-gentiobioside in gardenia fruit by high-performance liquid chromatography with ultraviolet detection following electrospray ionization mass spectrometry

A practical method for the analysis of genipin-1-β-gentiobioside in gardenia fruit was developed by high-performance liquid chromatography with ultraviolet monitoring and electrospray ionization mass spectrometry characterization (HPLC/UV/ESI-MS). Efficiency of ultrasonic extraction (UE), accelerated solvent extraction (ASE) and high-speed homogenizer extraction (HHE) on genipin-1-β-gentiobioside in gardenia fruit was compared. UE gave higher extraction efficiency and lower matrix interference, and it was employed. Analysis of genipin-1-β-gentiobioside was performed using a Supelco C₁₈ column with methanol–20 mM NH₄Ac (30:70, v/v) as the eluent. Flow rate was at 0.8 ml/min, and the detection was at 240 nm. The limit of detection (LOD), using HPLC/UV, was about 0.25 μg/ml, whereas the overall recovery was better than 96.0%. Both full scan MS and MS² of genipin-1-β-gentiobioside with positive polarity were obtained and elucidated. The specific ions were chosen to characterize genipin-1-β-gentiobioside in gardenia fruit sample. The proposed method has been successfully applied to measure the real samples and the content profiles of genipin-1-β-gentiobioside in gardenia fruit samples were obtained and evaluated.     

High-pressure preparation, crystal structure, and properties of the new rare-earth oxoborate β-Dy2B4O9

In this work we report about a new rare-earth oxoborate β-Dy₂B₄O₉ synthesized under high-pressure/high-temperature conditions from Dy₂O₃ and boron oxide B₂O₃ in a B₂O₃/Na₂O₂ flux with a walker-type multianvil apparatus at 8 GPa and 1000°C. Single crystal X-ray structure determination of β-Dy₂B₄O₉ revealed: , a=616.2(1) pm, b=642.8(1) pm, c=748.5(1) pm, α=102.54(1)°, β=97.08(1)°, γ=102.45(1)°, Z=2, R1=0.0151, wR₂=0.0475 (all data). The compound exhibits a new structure type which is built up from bands of linked BO₃- (Δ) and tetrahedral BO₄-groups (□). The Dy³⁺-cations are positioned in the voids between the bands. According to the conception of fundamental building blocks β-Dy₂B₄O₉ can be classified with the notation 2Δ6□:Δ3□=4□=3□Δ. Furthermore we report about temperature-resolved in situ powder diffraction measurements and IR-spectroscopic investigations on β-Dy₂B₄O₉.