A new weakly basic amino‐reactive fluorescent label for use in isoelectric focusing and chip electrophoresis

In this study, we present a novel amino‐reactive fluorescence marker (referred to as UR‐431), which is well suited for electrophoretic techniques. A main feature of this marker is its weakly basic behavior when conjugated to analytes. Labeled primary amines exhibit a positive net charge and accordingly a cathodic mobility below a pH of 2.4. The label features a pH‐independent fluorescence emission and is thus very interesting for electrophoretic applications such as IEF. The absorption maximum of this yellow daylight chromophore is at 431 nm, whereas fluorescence emission peaks at 537 nm (quantum yield≈0.1). The label was successfully conjugated to amines, peptides and proteins and separated via CE and MCE. The on‐chip detection limit of labeled lysine using a mercury‐lamp‐based fluorescence microscope was determined as 12 nM. An important feature of the new label is that it effects only a subtle change of the pI of proteins compared with common anionic labels, e.g. FITC. pI values of proteins were investigated by comparing native proteins and labeled proteins in CIEF. UR‐431 was also applied to sensitive detection of amines and peptides in MCE.     

Interaction Between <Emphasis Type="Italic">Trans</Emphasis>-resveratrol and Serum Albumin in Aqueous Solution

The interaction between trans-resveratrol (TR) with bovine serum albumin (BSA) in aqueous solution was investigated by means of fluorescence, synchronous fluorescence and infrared spectroscopy. The fluorescence of BSA can be quenched remarkably by TR in aqueous solution. A notable red-shift of the maximum emission of BSA from 340 to 353 nm together with appearance of an isoemissive point at 395 nm were observed. The results indicate that TR binds to BSA, forming a TR–BSA complex. The TR–BSA binding distance was determined to be less than 7 nm, suggesting that energy transfer from BSA to TR may occur. The interaction process is spontaneous. Based on the obtained thermodynamic parameters, electrostatic forces may play a major role in this process. Both synchronous fluorescence and FT-IR spectra confirmed the interaction, and indicate the conformational changes of BSA.     

Probing the Binding of Rifampicin to Bovine Serum Albumin in Aqueous Solution

The binding of rifampicin (RFP), an anti-tuberculosis agent, to bovine serum albumin (BSA) was studied at physiological conditions (pH=7.40) by a spectroscopic approach. In the discussion of the quenching mechanism, it was proved that the fluorescence quenching of BSA by RFP is a result of the formation of a RFP–BSA complex. Binding parameters were determined using the modified Stern-Volmer equation and Scatchard’s equation to provide a measure of the binding affinity between RFP and BSA. The resulting thermodynamic parameters ΔG, ΔH, and ΔS at different temperatures indicate that electrostatic interactions play a major role in RFP–BSA association. Site marker competitive displacement experiments demonstrate that RFP binds with high affinity to the site I (subdomain IIA) of BSA. Furthermore, the effect of metal ions on the RFP–BSA system was studied, and the specific binding distance r (3.38 nm) between donor and acceptor (RFP) was obtained according to the fluorescence resonance energy transfer (FRET).     

Study of the conjugation reaction between bovine serum albumin and gentamicin with Ponceau S as fluorescence probe

Abstract  

Ponceau S (PS) can quench the fluorescence of bovine serum albumin (BSA) in aqueous solution of pH 7.40. The static fluorescence-quenching process between BSA and PS was confirmed and the binding constant, the number of binding sites, and thermodynamic data for the interaction between BSA and PS were obtained. The results showed that the number of binding sites was 1 and that electrostatic attraction was important in the binding of BSA to PS. On the basis of the theory of F?rster resonance energy transfer, the binding distance (r < 7 nm) between PS and BSA was obtained. Site marker competitive experiments indicated that binding of PS to BSA primarily occurred in sub-domain IIA (site I). There was no obvious fluorescence intensity change on combining BSA and gentamicin (GM), so the conjugation reaction between BSA and GM cannot be studied by spectroscopy. It was observed that when GM was added to the BSA–PS system, the relative fluorescence intensity of the system recovered gradually with increasing concentration of GM, which showed there was a conjugation reaction between GM and BSA and that binding of GM to BSA primarily occurred in sub-domain IIA (site I).     

Determination of nanograms of proteins based on the amplified resonance light scattering signals of Tichromine

A new high-sensitivity detection of protein assay at the nanogram level is developed based on the amplified resonance light scattering signals (RLS) of Tichromine (TCM). In Walpole (NaAc–HCl) buffer (pH 4.05), TCM reacts with proteins to form large particles, which results in remarkable enhanced RLS signals characterized by three peaks at 293 nm, 399 nm and 553 nm. Mechanistic studies showed that the enhanced RLS stems from a large complex of TCM–BSA formed for the electrostatic effect between TCM and BSA. With the enhanced RLS signals at the three wavelengths, the enhanced RLS intensity is proportional to the concentration of proteins in an appropriate range. The lowest limit of determination was 7.4 ng mL^?1. The proposed method was successfully applied to determine total protein in human serum samples.     

Study on molecular interactions between proteins on live cell membranes using quantum dot-based fluorescence resonance energy transfer

Mouse anti-human CD71 monoclonal antibody (anti-CD71) was conjugated with red quantum dots (QDs; 5.3 nm, emission wavelength λ _em = 614 nm) and used to label HeLa cells successfully. Then green QD-labeled goat anti-mouse immunoglobulin G (IgG; the size of the green QDs was 2.2 nm; λ _em = 544 nm) was added to bind the red-QD-conjugated anti-CD71 on the cell surface by immunoreactions. Such interaction between anti-CD71 and IgG lasted 4 min and was observed from the fluorescence spectra: the fluorescence intensity of the “red” peak at 614 nm increased by 32%; meanwhile that of the “green” one at 544 nm decreased by 55%. The ratio of the fluorescence intensities (I _544 nm/I _614 nm) decreased from 0.5 to 0.2. The fluorescence spectra as well as cell imaging showed that fluorescence resonance energy transfer took place between these two kinds of QDs on the HeLa cells through interactions between the primary antibody and the secondary antibody.     

Study on the interaction between antibacterial drug and bovine serum albumin: A spectroscopic approach

The binding of sulfamethoxazole (SMZ) to bovine serum albumin (BSA) was investigated by spectroscopic methods viz., fluorescence, FT-IR and UV–vis absorption techniques. The binding parameters have been evaluated by fluorescence quenching method. The thermodynamic parameters, ΔH°, ΔS°and ΔG° were observed to be −58.0 kJ mol⁻¹, −111 J K⁻¹ mol⁻¹ and −24 kJ mol⁻¹, respectively. These indicated that the hydrogen bonding and weak van der Waals forces played a major role in the interaction. Based on the Forster's theory of non-radiation energy transfer, the binding average distance, r, between the donor (BSA) and acceptor (SMZ) was evaluated and found to be 4.12 nm. Spectral results showed the binding of SMZ to BSA induced conformational changes in BSA. The effect of common ions and some of the polymers used in drug delivery for control release was also tested on the binding of SMZ to BSA. The effect of common ions revealed that there is adverse effect on the binding of SMZ to BSA.     

Fluorescence OFF-ON-OFF mechanism for the detection of digoxin,La3+, and epinephrine using bovine serum albumin functionalized molybdenum oxide quantum dots

Herein, we synthesized molybdenum oxide quantum dots using bovine serum albumin as a ligand (BSA-MoO_x QDs) via a simple method. The synthesized fluorescent BSA-MoO_x QDs were stable, and blue fluorescence was noticed upon exposure to UV lamp at 365 nm. When excited at 320 nm, BSA-MoO_x QDs showed an emission peak at 406 nm. Atomic force microscopic images demonstrated that the thickness of BSA layer on the surface of MoO_x QDs is 3.9 ± 1.6 nm. The as-synthesized BSA-MoO_x QDs acted as a sensor for the detection of digoxin, La³⁺, and epinephrine via fluorescence OFF-ON-OFF mechanisms, exhibiting linear ranges of 1–25, 0.125–5, and 0.5–10 μM with lower detection limits of 9.74, 23.08, and 4.58 nM for digoxin, La³⁺, and epinephrine, respectively. This method was successfully demonstrated to be an effective analytical platform for measuring digoxin and epinephrine in pharmaceutical and biofluid samples.     

Molecular simulation of the interaction between novel type rhodanine derivative probe and bovine serum albumin

The interaction between 3-(4′-methylphenyl)-5-(4′-methyl-2′-sulfophenylazo) rhodanine (M4MRASP) and bovine serum albumin (BSA) was studied by using spectrofluorimetry. It was shown in fluorescence spectrums that the quenching mechanism of BSA by M4MRASP was a static quenching. Meanwhile, the binding constant and binding site numbers were calculated. The action distance (r = 8.03 nm) and energy transfer efficiency (E = 0.12) between donor (BSA) and acceptor (M4MRASP) were obtained according to the theory of Förster non-radiation energy transfer. The effect of M4MRASP on the conformation of BSA was further analyzed by using synchronous fluorescence spectrometry. A new model of the interaction between small organic molecule and biomacromolecule was established. The results offered a reference for the studies on the biological effects and action mechanism of small molecule with protein.     

Study on the interaction of 3,3-bis(4-hydroxy-1-naphthyl)-phthalide with bovine serum albumin by fluorescence spectroscopy

The interaction between 3,3-bis(4-hydroxy-1-naphthyl)-phthalide (NPP) and bovine serum albumin (BSA) have been studied by fluorescence spectroscopy. The binding of NPP quenches the BSA fluorescence. By the fluorescence quenching results, it was found that the binding constant K = 5.30 × 10⁴ L mol⁻¹, and number of binding sites n = 0.9267. In addition, according to the synchronous fluorescence spectra of BSA, the results showed that the fluorescence spectra of BSA mainly originate from the tryptophan residues. Finally, the distance between the acceptor NPP and BSA was estimated to be 1.94 nm using Föster's equation on the basis of fluorescence energy transfer. The interaction between NPP and BSA has been verified as consistent with the static quenching procedure and the quenching mechanism is related to the energy transfer.     

Studies of the interaction between daidzein and 3′-daidzein sulfonic sodium with bovine serum albumin by spectroscopic methods

The interaction between daidzein and 3′-daidzein sulfonic sodium with bovine serum albumin (BSA) in physiological buffer (pH = 7.4) is investigated by fluorescence quenching technique and UV/vis absorption spectra. The results reveal that both daidzein and 3′-daidzein sulfonic sodium could strongly quench the intrinsic fluorescence of BSA. The quenching mechanism of both the daidzein and 3′-daidzein sulfonic sodium for BSA is static quenching procedure. The apparent binding constants K _a and number of binding sites n of daidzein and 3′-daidzein sulfonic sodium with BSA are obtained by fluorescence quenching method. The thermodynamic parameters, enthalpy change (Δ_r H ^m ), and entropy change (Δ_r S ^m ), are calculated, respectively, which indicate that the interaction of daidzein with BSA is driven mainly by hydrogen bonding and van der Waals, and 3′-daidzein sulfonic sodium with BSA is driven mainly by hydrophobic forces. The distance r between BSA with daidzein and 3′-daidzein sulfonic sodium are calculated to be 4.02 nm and 3.08 nm, respectively, based on F?rster’s non-radiative energy transfer theory. The results of synchronous fluorescence spectra show that binding of daidzein and 3′-daidzein sulfonic sodium with BSA cannot induce conformational changes in BSA.     

A multichannel native fluorescence detection system for capillary electrophoretic analysis of neurotransmitters in single neurons

A laser-induced native fluorescence detection system optimized for analysis of indolamines and catecholamines by capillary electrophoresis is described. A hollow-cathode metal vapor laser emitting at 224 nm is used for fluorescence excitation, and the emitted fluorescence is spectrally distributed by a series of dichroic beam-splitters into three wavelength channels: 250–310 nm, 310–400 nm, and >400 nm. A separate photomultiplier tube is used for detection of the fluorescence in each of the three wavelength ranges. The instrument provides more information than a single-channel system, without the complexity associfated with a spectrograph/charge-coupled device-based detector. With this instrument, analytes can be separated and identified not only on the basis of their electrophoretic migration time but also on the basis of their multichannel signature, which consists of the ratios of relative fluorescence intensities detected in each wavelength channel. The 224-nm excitation channel resulted in a detection limit of 40 nmol L⁻¹ for dopamine. The utility of this instrument for single-cell analysis was demonstrated by the detection and identification of the neurotransmitters in serotonergic LPeD1 and dopaminergic RPeD1 neurons, isolated from the central nervous system of the well-established neurobiological model Lymnaea stagnalis. Not only can this system detect neurotransmitters in these individual neurons with S/N>50, but analyte identity is confirmed on the basis of spectral characteristics. Lapainis and Scanlan contributed equally to this work.     

Chip electrophoresis of active banana ingredients with label-free detection utilizing deep UV native fluorescence and mass spectrometry

In the present work, we report on a rapid and straightforward approach for the determination of biologically active compounds in bananas applying microchip electrophoresis (MCE). For this purpose, we applied label-free detection utilizing deep UV fluorescence detection with excitation at 266 nm. Using this approach, we could identify dopamine and serotonin, their precursors tryptophan and tyrosine and also the isoquinoline alkaloid salsolinol in less than 1 min. In bananas, after 10 days of ripening, we additionally found the compound levodopa which is a metabolite of the tyrosine pathway. Quantitative analysis of extracts by external calibration revealed concentrations of serotonin, tryptophan, and tyrosine from 2.7 to 7.6 μg/mL with relative standard deviations of less than 3.5%. The corresponding calibration plots showed good linearity with correlation coefficients higher than 0.985. For reliable peak assignment, the compounds were also analyzed by coupling chip electrophoresis with mass spectrometry. This paper demonstrates exemplarily the applicability of MCE with native fluorescence detection for rapid analysis of natural compounds in fruits and reveals the potential of chip-based separation systems for the analysis of complex mixtures.     

Studies on the Toluidine Blue Dimer as a Fluorescence Probe for Protein Assays

Abstract

A spectrofluorometric method was developed for the determination of total serum protein by exploring toluidine blue (TB) as the fluorescence probe. The fluorescence intensity of TB at 648 nm was significantly quenched in the presence of sodium dodecylbenzene sulfonate (SDBS) by forming a dimer of the dye, which can afterwards reconvert to monomer when proteins were added accompanied by the recovery of the fluorescence. This might be attributed to the modulated transferring of the dimer‐monomer equilibrium of TB in the anionic surfactant caused by the addition of protein. A linear calibration graph was obtained in the range of 0.5–50 mg/l BSA, with a detection limit of 0.15 mg/l and a RSD of 1.3% (n=11, 5.0 mg/l BSA). Total proteins in human serums were analyzed by using the present procedure and the results agreed well with those obtained by the Biuret method.     

Fluorometric determination of cadmium(II) and mercury(II) using nanoclusters consisting of a gold-nickel alloy

A one-pot route has been developed for the preparation of bovine serum albumin-templated nickel-doped bimetallic gold-nickel nanoclusters (BSA-Au-Ni NCs) at a 10:1 M ratio of the precursor salts in a BSA matrix under alkaline conditions. The metal ions are reduced to the metal alloys by BSA. The resulting NCs display strong fluorescence and dual emission with peaks at 405 and 640 nm, respectively, under excitation at 340 nm. Fluorescence is strongly enhanced on addition of Cd(II) ions, but quenched on addition of Hg(II) ions. The findings have been exploited to design a fluorometric method for the separate determination of Cd(II) and Hg(II), respectively. The optimized analytical nanosystem displays relatively good dynamics between enhancement and quenching. Cd(II) and Hg(II) can be quantified in the 0 to 200 and 0 nM to 24 μM, respectively. The limits of detection are ~1.8 nM in both cases, which indicates the highest sensitivity to Cd(II) and Hg(II) ions for a fluorescent probe. This new kind of nanocrystal probe is hardly interfered by a range of commonly encountered metal ions. Its advantages were demonstrated by determining Cd(II) and Hg(II) ions in spiked serum samples.

Dually emitting nanoclusters composed of gold-nickel alloys are shown to act as very sensitive fluorescent probes for the detection of Cd(II) and Hg(II) ions.

     

Studies of (3-mercaptopropyl)trimethoxylsilane and bis(trimethoxysilyl)ethane sol–gel coating on copper and aluminum

Berbamine, a naturally occurring isoquinoline alkaloid extracted from Berberis sp., is the active constituent of some Chinese herbal medicines and exhibits a variety of pharmacological activities. The effects of berbamine on the structure of bovine serum albumin (BSA) were investigated by circular dichroism, fluorescence and absorption spectroscopy under physiological conditions. Berbamine caused a static quenching of the intrinsic fluorescence of BSA, and the quenching data were analyzed by application of the Stern–Volmer equation. There was a single primary berbamine-binding site on BSA with a binding constant of 2.577 × 10⁴ L mol⁻¹ at 298 K. The thermodynamic parameters, enthalpy change (ΔH⁰) and entropy change (ΔS⁰) for the reaction were −76.5 kJ mol⁻¹ and −173.4 J mol⁻¹ K⁻¹ according to the van’t Hoff equation. The results showed that the hydrogen bond and van der Waals interaction were the predominant forces in the binding process. Competitive experiments revealed a displacement of warfarin by berbamine, indicating that the binding site was located at Drug sites I. The distance r between the donor (BSA) and the acceptor (berbamine) was obtained according to the Förster non-radiation energy transfer theory. The results of three-dimensional fluorescence spectra, UV–vis absorption difference spectra and circular dichroism of BSA in the presence of berbamine showed that the conformation of BSA was changed. The results provide a quantitative understanding of the effect of berbamine on the structure of bovine serum albumin, providing a useful guideline for further drug design.     

The Combination of Laser-Induced Fluorescence and Intensified Linear Diode Array Detection in Column Liquid Chromatography

Abstract

The frequency-doubled 514-nm argon-ion laser line providing excitation at 257 nm is combined with an intensified linear diode array (ILDA) detector to enable on-the-fly identification by laser-induced fluorescence (LIF) in conventional-size column liquid chromatography (LC). The potential of this detection system is demonstrated for the analysis of a standard mixture of polynuclear aromatic hydrocarbons (PAHs). Detection limits are at the 1.5 μg 1^?1 level (15 pg injected); the identitication limits are about one order of magnitude higher.     

Ratiometric detection of alkaline phosphatase based on aggregation-induced emission enhancement

Alkaline phosphatase (ALP) is an important enzyme that is associated with many human diseases, so the quantitative detection of ALP is vital from a clinical perspective. Nevertheless, most fluorescent assays for monitoring ALP depend on aggregation-induced quenching (ACQ), single-signal modulation, or a “signal off” mode, which suffer from poor sensitivity, a “false positive” problem, and low signal output. In this work, we utilized the electrostatically driven self-assembly of glutathione-capped gold nanoclusters (GSH-AuNCs, which show aggregation-induced emission, AIE) and amino-modified silicon nanoparticles (SiNPs) to create a hybrid probe (SiNPs@GSH-AuNCs). This nanohybrid probe showed emission from the SiNPs at around 470 nm as well as aggregation-induced emission enhancement (AIEE) of the GSH-AuNCs at 580 nm. The AIEE of the GSH-AuNCs was quenched in the presence of KMnO₄, but the AIEE was recovered by adding ascorbic acid as an oxidation–reduction reaction occurred between KMnO₄ and the ascorbic acid. The fluorescence of the SiNPs remained constant whether the AIEE was quenched or not, meaning that the fluorescence of the SiNPs could be used as an internal reference. In a typical enzymatic reaction, ascorbic acid 2-phosphate is hydrolyzed by ALP to produce ascorbic acid. Therefore, the hybrid probe was shown to allow the ratiometric detection of ALP, with a linear range of 0.5–10 U L⁻¹ and a limit of detection (LOD) of 0.23 U L⁻¹. Finally, the proposed analytical strategy was successfully applied to detect ALP in human serum samples and to determine the concentration of an ALP inhibitor.

Graphical Abstract

     

Green synthesis and characterization of Fe doped ZnO nanoparticles and their interaction with bovine serum albumin

Herein we report an eco-friendly and cost efficient synthesis of Fe doped ZnO (TPFZO) nanoparticles using the extract of Thespesia polpulanea flowers as a stabilizing agent. The synthesized NPs have been characterized by XRD, FT-IR, UV-DRS, SEM, EDAX and TEM studies. The synthesized NPs were found to have the crystallite size in the range of 30–60 ​nm. The calculated band gap energies for ZO and TPFZO nanoparticles were 3.00 ​eV and 1.97 ​eV respectively. The size distribution of the ZO and TPFZO obtained from TEM were observed to be lying in the range 50–120 ​nm and 4–22 ​nm respectively. The interaction of TPFZO NPs with bovine serum albumin (BSA) has been studied using fluorescence and absorption titration methods. The results indicated that the nanoparticles quenched the BSA fluorescence at 340 ​nm via static quenching mode having a bimolecular quenching rate constant value of 6.21 ​× ​10¹³ Lmol⁻¹s⁻¹.     

Studies of the interaction between apigenin and bovine serum albumin by spectroscopic methods

The interaction between apigenin (Ap) and bovine serum albumin (BSA) in physiological buffer (pH = 7.4) is investigated by fluorescence quenching technique and UV-vis absorption spectra. The results reveal that Ap could strongly quench the intrinsic fluorescence of BSA. The quenching mechanism of Ap for BSA varies with the change of Ap concentration. when Ap concentration is lower, it is a static quenching procedure, when Ap concentration is higher, a combined quenching (both static and dynamic) would operate. The apparent binding constants Ka and number of binding sites n of Ap with BSA are obtained by fluorescence quenching method. The thermodynamic parameters, enthalpy change (Δ_r H ^m and entropy change (Δ_r S ^m ), are calculated to be −15.382 kJ mol⁻¹ K⁻¹ < 0 and 104.888 J mol⁻¹ K⁻¹ > 0, respectively, which indicate that the interaction of Ap with BSA is driven mainly by hydrogen bonding and hydrophobic interactions. The distance r between BSA and Ap is calculated to be 1.89 nm based on F?rster’s non-radiative energy transfer theory. The results of synchronous fluorescence spectra show that binding of Ap with BSA cannot induce conformational changes in BSA.