Spectrophotometric and spectrodensitometric determination of paracetamol and drotaverine HCl in combination

Thin-layer chromatography, first derivative, ratio spectra derivative spectrophotometry and Vierordt's method have been developed for the simultaneous determination of paracetamol and drotaverine HCl. TLC densitometric method depends on the difference in Rf values using ethyl acetate:methanol:ammonia (100:1:5 v/v/v) as a mobile phase. The spots of the two drugs were scanned at 249 and 308 nm over concentration ranges of 60-1200 microg/ml and 20-400 microg/ml with mean percentage recovery 100.11%+/-1.91 and 100.15%+/-1.87, respectively. The first derivative spectrophotometric method deals with the measurements at zero-crossing points 259 and 325 nm with mean percentage recovery 99.25%+/-1.08 and 99.45%+/-1.14, respectively. The ratio spectra first derivative technique was used at 246 and 305 nm with mean percentage recovery 99.75%+/-1.93 and 99.08%+/-1.22, respectively. Beer's law for first derivative and ratio spectra derivative methods was obeyed in the concentration range 0.8-12.8 and 0.4-6.4 microg/ml of paracetamol and drotaverine HCl, respectively. Vierordt's method was applied to over come the overlapping of paracetamol and drotaverine HCl in zero-order spectra in concentration range 2-26 and 2-40 microg/ml respectively. The suggested methods were successfully applied for the analysis of the two drugs in laboratory prepared mixtures and their pharmaceutical formulation. The validity of the methods was assessed by applying the standard addition technique. The obtained results were statistically agreed with those obtained by the reported method.     

Spectrophotometric and spectrodensitometric determination of Clopidogrel Bisulfate with kinetic study of its alkaline degradation

Four sensitive, selective and precise stability-indicating methods for the determination of Clopidogrel Bisulfate (CLP) in presence of its alkaline degradate and in pharmaceutical formulations were developed and validated. Method A is a second derivative (D²) spectrophotometric one, which allows the determination of CLP in presence of its alkaline degradate at 219.6, 270.6, 274.2 and 278.4 nm (corresponding to zero-crossing of the degradate) over a concentration range of 4-37 μg mL⁻¹ with mean percentage recoveries 99.81 ± 0.893, 99.72 ± 0.668, 99.88 ± 0.526 and 100.46 ± 0.646, respectively. CLP can be determined in the presence of up to 65% of its degradate. D² method was used to study the kinetic of CLP alkaline degradation that was found to follow a first-order reaction. The t_1/2 was 6.42 h while K (reaction rate constant) was 0.1080 mol/h. Method B is the first derivative of the ratio spectra (DD¹) spectrophotometric method, by measuring the peak amplitude at 217.6 and 229.4 nm using acetonitrile and CLP can be determined in the presence of up to 70% of its degradate. The linearity range was 5-38 μg mL⁻¹ with mean percentage recoveries 99.88 ± 0.909 and 99.70 ± 0.952, respectively. Method C based on the determination of CLP by the bivariate calibration depending on simple mathematic algorithm which provides simplicity and rapidity. The method depends on quantitative evaluation of the absorbance at 210 and 225 nm over a concentration range 5-38 μg mL⁻¹ with mean percentage recovery 99.27 ± 1.115. CLP can be determined in the presence of up to 70% of its degradate. Method D is a TLC-densitometric one, where CLP was separated from its degradate on silica gel plates using hexane:methanol:ethyl acetate (8.7:1:0.3, v/v/v) as a developing system. This method depends on quantitative densitometric evaluation of thin layer chromatogram of CLP at 248 nm over a concentration range of 0.6-3 μg/band with mean percentage recovery 99.97 ± 1.161. CLP can be determined in the presence of up to 90% of its alkaline degradate. The selectivity of the proposed methods was checked using laboratory prepared mixtures. The proposed methods have been successfully applied to the analysis of CLP in pharmaceutical dosage forms without interference from other dosage form additives and the results were statistically compared with the official method.     

Spectrophotometric quantification of lactose in solution with a peroxidase-based enzymatic cascade reaction system

A spectrophotometric assay was developed for the quantification of lactose in aqueous solution via a one-pot enzymatic cascade reaction at 25 °C and pH 7.2. Lactose (0.2-1.8 mM), E. coli β-galactosidase (β-Gal), Aspergillus niger glucose oxidase (GOD), horseradish peroxidase (HRP) and o-phenylenediamine (OPD) were incubated, and the increase in absorbance at 417 nm (A (417)) due to the formation of DAP (2,3-diaminophenazine), the dimeric oxidation product of OPD, was followed. The increase in A (417) was found to depend linearly on the initial lactose concentration via three consecutive but simultaneously occurring enzymatic reaction steps catalyzed by β-Gal, GOD, and HRP. No pre-incubation of lactose with β-Gal is needed with this simple lactose assay.     

Spectrophotometric determination of serum iron with a new reagent

The use of 2,2′-dipyridyl-2-pyridylhydrazone (DPPH) as a new “ferroin” type color reagent for the spectrophotometric determination of serum iron is presented. The determination is performed on protein-free filtrates at pH 1.6 to 3.0. The reagent has been found to be specific for serum iron, under the proposed conditions. The color of the water-soluble iron-DPPH complex is considerably stable.     

Development and validation of a UPLC method for quantification of antiviral agent,Acyclovir in lipid-based formulations

PurposeThe objective of the current study is to evaluate the Ultra Performance Liquid Chromatography (UPLC) method for quantification of Acyclovir in lipid-based formulations.MethodA simple, rapid, reliable and precise reversed phase UPLC method has been developed and validated according to the regulatory guidelines, which composed of isocratic mobile phase; 0.25% formic acid (FA) in Milli-Q water with a flow rate of 0.5 ml/min, and column BEH C18 (2.1 × 50 mm, 1.7 μm). The detection was carried out at 254 nm.ResultsThe developed UPLC method was found to be rapid (1.2 min run time), selective with well resoluted Acyclovir peak (0.89 min) from different lipid matrices and sensitive (Limit of Detection (LOD) was 0.3 ppm and Lower Limit of Quantification (LLOQ) was 1 ppm). The accuracy and precision were determined and were perfectly matching with the standard FDA limits.ConclusionThe study showed that the proposed UPLC method can be used for the assessment of drug purity, stability, solubility and lipid-formulation release profile with no interference of excipients or related substances of active pharmaceutical ingredient.     

A combination of statistical and analytical evaluation methods as a new optimization strategy for the quantification of pharmaceutical residues in sewage effluent

In this study, a new solid-phase microextraction (SPME) method for simultaneous extraction of pharmaceutical compounds with acidic and basic characteristics (ibuprofen, fenoprofen, diclofenac, diazepam and loratadine) from residual water samples is proposed. In this procedure, the extraction is processed using two distinct sample pH values. The extraction is begun at pH 2.5 to promote the sorption of acidic pharmaceuticals and after 35 min the sample pH is changed to 7.0 by adding 0.4 mol L⁻¹ disodium hydrogenphosphate, so that the basic compounds can be sorbed by the fiber (20 min). The pH change is performed without interruption of the extraction process. A comparison between the proposed method and the SPME method applied to each group of the target compounds was performed. Gas chromatography coupled to mass spectrometry was used for separation and detection of analytes. The extraction conditions for the three methods were optimized using full factorial experimental design, response surface through a Doehlert matrix and central composite design. Limits of detection (0.02-0.43 μg L⁻¹) and correlation coefficients (0.9970-0.9998) were determined for the three methods. The proposed extraction procedure was applied to samples of sewage treatment plant effluent and untreated wastewater. Recovery and relative standard deviation values ranged from 67 to 116% and 4.6 to 14.5%, respectively, for all compounds studied. Modification of sample pH during the extraction procedure was shown to be an excellent option for all of the compounds and may be extended to the simultaneous extraction of other compounds with different acid-base characteristics.     

Spectrophotometric microdetermination of anti-Parkinsonian and antiviral drug amantadine HCl in pure and in dosage forms

Two simple, rapid, sensitive, low-cost, and accurate methods (A and B) for the microdetermination of amantadine HCl (AMD) in pure form and in pharmaceutical formulations are developed. Method A is based on the formation of tris (o-phenanthroline)-iron(II) complex (ferroin) upon reaction of amantadine HCl with an iron (III)-o-phenanthroline mixture in sodium acetate-acetic acid buffer media. The ferroin complex is spectrophotometrically measured at λ_max 509 nm against reagent blank. Method B is based on the reduction of Fe (III) by the drug which forms colored complex (λ_max 521 nm) with 2,2′-bipyridyl. Optimizations of the experimental conditions are described. Beer’s law is obeyed in the concentration ranges 0.4–10 and 0.6–22 μg mL^?1 using 1,10-phenanthroline and 2,2′-bipyridyl, respectively. The developed methods have been successfully applied for the determination of AMD in bulk drugs and in pharmaceutical formulations. The common excipients and additives did not interfere in their determinations.     

Synthesis and antiviral activity of new indole-based heterocycles

New 1,2,4-triazolo[3,4-b]-1,3,4-thiadiazine and 1,3-thiazole derivatives incorporating indole nucleus were prepared using 3-acetylindole as precursor and evaluated for their antiviral activity against herpes simplex type 1 (HSV-1).     

Spectrophotometric quantification of fluoxetine hydrochloride: Application to quality control and quality assurance processes

Simple and rapid spectrophotometric methods have been developed for the microdetermination of fluoxetine HCl. The proposed methods are based on the formation of ion-pair complexes between fluoxetine and bromophenol blue (BPB), bromothymol blue (BTB), bromocresol green (BCG), and bromocresol purple (BCP) which can be measured at optimum λ_max. Optimization of reaction conditions was investigated. Beerșs law was obeyed in the concentration ranges of 0.5–8.0 μg mL⁻¹, whereas optimum concentration as adopted from the Ringbom plots was 0.7–7.7 μg mL⁻¹. The molar absorptivity, Sandell sensitivity, and detection limit were also calculated. The most optimal and sensitive method was developed using BCG. The correlation coefficient was 0.9988 (n = 6) with a relative standard deviation of 1.25, for six determinations of 4.0 μg mL⁻¹. The proposed methods were successfully applied to the determination of fluoxetine hydrochloride in its dosage forms and in biological fluids (spiked plasma sample) using the standard addition technique.     

Synthesis and antiviral activity of new benzothiadiazine dioxide derivatives

A series of 2,1,3‐ and 1,2,4‐benzothiadiazine derivatives were synthesized by alkylation via Mitsunobu reaction and evaluated for their antiviral activity against ADV, HHV‐6, Cox‐B5 and H‐CMV. Most of them were active at micromolar level against one or more viral strains. All the molecules studied are poorly cytotoxic (maximum non toxic concentrations were >25μM), except one compound that presents a higher cytotoxicity (maximum non toxic concentration was 6 μM).     

Synthesis and antiviral activity of new substituted pyrimidine glycosides

A number of N‐substituted pyrimidine glycosides were synthesized by coupling reaction of the pyrimidine base with acetobromosugars followed by deprotection. The synthesized compounds were tested for their antiviral activity against Hepatitis B Virus (HBV). Plaque reduction infectivity assay was used to determine virus count reduction as a result of treatment with tested compounds which showed moderate to high anti viral activities. J. Heterocyclic Chem., (2011).     

新试剂光度法测定废水中氯化十六烷基吡啶的研究

研究了新试剂4,4′-二[3-(4-苯基-2-噻唑基)三氮烯基]联苯(BPTTBP)与氯化十六烷基吡啶(CPC)的显色反应。在NaOH碱性介质中,试剂与CPC发生显色反应,形成紫色离子缔合物,最大吸收波长592 nm。试剂BPTTBP与CPC的缔合比为1∶1,其表观摩尔吸光系数为2.84×104L.mol-1.cm-1,CPC量在0~1.0×10-5mol/L范围内服从比尔定律。方法可直接用于废水中微量CPC的测定。     

A new antiviral pregnane from a gorgonian-derived Cladosporium sp. fungus

A new pregnane, 3α-hydroxy-7-ene-6,20-dione (1), and five known steroids (2–6), along with one known steroidal glycoside (7) were obtained from the fungus Cladosporium sp. WZ-2008-0042 cultured from a gorgonian Dichotella gemmacea collected from the South China Sea. The structure and absolute configuration of the new compound (1) were elucidated by comprehensive spectroscopic data and X-ray diffraction data. The compound has a rare configuration of 3α-OH that is different from most of pregnanes. All of the isolated compounds were evaluated for their antiviral activities against respiratory syncytial virus (RSV). Among them, 1 exhibited potential antiviral activity with the IC₅₀ value of 0.12 mM.     

Spectrophotometric investigation of trace copper and silver complexes with a new chromogenic ligand,o-methylbenzenediazoaminobenzene-p-azobenzene

The synthesis of o-methylbenzenediazoaminobenzene-p-azobenzene (o-MDAP) was made. At pH 12, copper and silver formed a sensitive complex with o-MDAP. The characteristics of copper and silver complexes have been determined. The results showed that the formed complexes were Cu(o-MDAP)2 and Ag(o-MDAP), respectively. Their true molar absorptivities were equal to ε = 7.79 x 10⁴ L mol^-1 cm^-1 at 510 nm and 2.21 x 10⁴ L mol^-1 cm^-1, and their overall stability constants were K = 3.41 x 10⁹ and 1.80 x 10⁴ respectively. The precision of copper and silver determinations was 2.3% and 3.1%, respectively.     

Structure characterization and quantification of a new isoflavone from the arial parts of Phyllanthus niruri

A new isoflavone together with 5,7-dimethoxy-3,4′-dihydroxy-3′,8-di-C-prenylflavanonol and 5,3′-dihydroxy-6,7,4′-trimethoxyflavone has been isolated from the arial parts of Phylanthus niruri. Based on spectral methods, the structure of the new compound was elucidated as 6-hydroxy-7,8,2′,3′,4′-pentamethoxyisoflavone. The isolated isoflavone was quantified by gas chromatography couple with mass spectroscopy (GC–MS) in selected ion monitoring (SIM) mode. Suitable methods for quantification and extraction have been developed. The quantifying limit of this method was less than 5 ng/ml in 10 g (fresh weight) of sample. Recovery of isoflavone in spiked samples exceeded 62–72% while R.S.D. ranged from 1.0% to 6.1%. The results showed significant variation in the amount of this marker in methanol extract of Phylanthus niruri from Kushtia, Bangladesh and Java Island, Indonesia, even though the values were almost identical for most of the cases. Isoflavone was detected in all the samples ranging from 0.12% to 0.29%.     

Two-photon absorption strength: a new tool for the quantification of two-photon absorption

In this paper, we define the two-photon absorption strength, a new characterization tool, similar to the oscillator strength, but for two-photon absorption. It allows the quantification of the two-photon absorption properties of molecular systems which are one-photon transparent. Its definition is such that the corresponding numerical values are around 100 for small molecules. We also show that this new theoretical tool allows the direct comparison of experimental and theoretical data without requiring the introduction of any arbitrary band width. As an example, the experimental and theoretical (AM1+CNDOS and HF+CIS3-21G) two-photon absorption properties of the 2,2'-bi(9,9-dihexylfluorene) molecule are compared.     

Spectrophotometric determination of trace amounts of beryllium using 1,8-dihydroxyanthrone as a new chromogenic reagent

A simple, rapid, and sensitive spectrophotometric method for the trace level determination of beryllium based on the formation of a 1:2 complex with anthralin (1,8-dihydroxyanthrone) as a new reagent is developed. A spectrophotometric method was used to determine the acidity constant and stepwise proton dissociation of the reagent. The experimental conditions for determining beryllium including the influences of pH, reagent concentration and time were evaluated and optimized. Under the optimum experimental conditions, the molar absorptivity of the complex is 0.47 × 10⁴ l mol^?1 cm^?1 at 545 nm. Calibration graph was linear in the range of 0.04–1.04 μg ml^?1 with a detection limit of 0.012 μg ml^?1 and a %RSD of 0.43%, for 5 replicate determinations at 0.48 μg ml^?1 of Be(II). The interferring effect of some cations and anions was also studied. The method was applied for the determination of beryllium in beryl, silicate rock and alloys. Ethylenediaminetetraacetic acid (EDTA) was used for masking interfering ions.