Ionic liquid-alkane association in dilute solutions

Enthalpies and entropies of transfer were measured by gas chromatography for dilute solutions of a homologous series of eight even n-alkanes (from octane to docosane) into six different ionic liquids (ILs) (namely, 1-butyl-3-methylimidazolium chloride, bromide, iodide, triflate and hexafluorophosphate; plus N-butylmethylpyridinium bis {(trifluoromethyl) sulfonyl}-imide) over the 80–150 °C temperature range, all ILs being in the liquid state. Over a narrow concentration range, the entropic change may be consistent with a solvophobic association model of n-alkanes in ILs. A very simple model is proposed to account for the thermodynamic data. This approach can be used to approximate interionic distances and possible dielectric constants for ILs. Although the model may have some use in dilute alkane-IL solutions, more sophisticated models, particularly for the enthalpic contributions, are desirable.     

Electrospray ionization mass spectrometry of ionic liquids and determination of their solubility in water

Electrospray ionization mass spectrometry is used to detect both the cations (C⁺) and the anions (A^–) of ionic liquids (CA). In this study, the ionic liquids are diluted with aqueous methanol before injection. In addition to the main peaks of the parent ions, fragmentation products are observed upon increasing the cone voltage, whereas aggregates of the parent ion with one or more ionic liquid molecules (e.g., C(CA)_n⁺, A(CA)_n^–) are observed upon decreasing the cone voltage. The ions of several ionic liquids in a mixture are also detected and the ratios of their concentrations estimated. A method is developed to determine quantitatively the concentration of an ionic liquid in solution by using the cation and anion of another ionic liquid as internal standards. By using this method, the solubilities in water at room temperature (22±1 °C) of three typical hydrophobic ionic liquids have been determined: 0.70±0.08 g L^–1 for methyltributylammonium bis(trifluoromethylsulfonyl)imide (MeBu₃NNTf₂), 6.0±0.5 g L^–1 for butylmethylpyrrolidinium bis(trifluoromethylsulfonyl)imide (BuMePyrNTf₂), and 18.6±0.7 g L^–1 for 1-butyl-3-methylimidazolium hexafluorophosphate (BMIPF₆).     

On the importance of the nature of the ionic liquids in the selective simultaneous separation of the substrates and products of a transesterification reaction through supported ionic liquid membranes

Previously, we reported the selective simultaneous separation of the substrates and products of a transesterification reaction (vinyl butyrate, 1-butanol, butyl butyrate, and butyric acid) through supported liquid membranes (SLMs) based on two ionic liquids (ILs): 1-butyl-3-methylimidazolium hexafluorophosphate, [bmim⁺][PF₆⁻], and 1-octyl-3-methylimidazolium hexafluorophosphate, [omim⁺][PF₆⁻]. The significant differences observed in the selectivity values, attributed to the different nature of the ionic liquid phase used, led us to further investigate this matter.     

Extraction of Metal Ions from Aqueous Solutions Using Imidazolium Based Ionic Liquids

This article represents a step towards how to choose an ionic liquid as the solvent to improve metal ion (Ag⁺ and Pb²⁺) extraction. The liquid-liquid solvent extraction is proposed with the following imidazolium ionic liquids (ILs): 1-ethyl-3-ethylimidazolium, or 1-butyl-3-ethylimidazolium, or 1-hexyl-3-ethylimidazolium bis{(trifluoromethyl)sylfonyl}imide [EEIM][NTf₂], or [BEIM][NTf₂], or [HEIM][NTf₂], or 1-butyl-3-ethylimidazolium hexafluorophosphate [BEIM][PF₆], or 1-hexyl-3-ethylimidazolium hexafluorophosphate [HEIM][PF₆] and the popular 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF₆] for comparison. The effect of anion type (NTf₂⁻ versus PF₆⁻) and the effect of structural components of an ionic liquid including alkyl chain length at the cation and the ethyl substituent instead methyl at the cation, on the extraction and re-extraction processes by using dithizone as a metal chelator, were studied at 296 K. Dithizone was employed to form neutral metal-dithizone complexes with heavy metal ions to extract them from aqueous solution into the ILs. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users. Presented at the 236th ACS National Meeting, August 17–21, Philadelphia, USA.     

Estimates of Internal Pressure and Molar Refraction of Imidazolium Based Ionic Liquids as a Function of Temperature

Estimates of the internal pressure (∂ U/∂ V) _T of the ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF₆], and 1-methyl-3-octylimidazolium tetrafluoroborate [OMIM][BF₄] were made from experimentally determined densities and speeds of sound in the temperature range 283.15 to 343.15 K. Values (∂ U/∂ V) _T for all the ILs studied are higher than those of water and molecular organic liquids. We also measured the refractive indices n _D in the temperature range 288.15 to 343.15 K and estimated the molar refraction R _M. Refractive indices of ILs were also higher than those of normal organic liquids but were comparable to those of long hydrocarbon chain organic solvents.     

[Bmim]PF6 and BF4 ionic liquids as novel and recyclable reaction media for aromatic amination

Activated aryl halides undergo smooth nucleophilic substitution reactions with secondary amines in 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim]PF₆) or 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF₄) ionic liquids (ILs) at room temperature to afford the corresponding arylamines in excellent yields under mild and neutral conditions.     

Influence of ionic liquids on the separation factor of three standard separation problems

Vapor–liquid equilibria (VLE) for the binary systems benzene–cyclohexane, 1-hexene–n-hexane and 2-propanol–water and the ternary systems with the ionic liquids 1-hexyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide [HMIM]⁺[BTI]⁻ and 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl)imide [BMPYR]⁺[BTI]⁻ as entrainers were measured, to investigate the influence of ionic liquids on the separation factors. The experimental data were compared with the predicted results using mod. UNIFAC (Do). The predicted results are in good agreement with the experimental data.     

Stereoselective synthesis of analogs of natural isoprenoids based on the reaction of alkyl 4-dialkoxyphosphoryl-3-methylbut-2-enoates with aldehydes in ionic liquids and in an imidazolium salt—benzene system

Condensation of alkyl 4-dialkoxyphosphoryl-3-methylbut-2-enoates with a number of aldehydes under the Horner—Emmons reaction conditions in 1-butyl-3-methylimidazolium hexafluorophosphate and tetrafluoroborate and in 1-butyl-3-methylimidazolium bromide—benzene and 1-butyl-2,3-dimethylimidazolium hexafluorophosphate—benzene systems was studied. The E/Z-stereoisomer ratio of the olefination products for the reaction carried out in ionic liquids was 3 : 1, which corresponds to the values attained previously in the KOH—benzene—Bu₄ ⁿNBr (cat.) system. Quantum-chemical calculations were used to determine the averaged radii (r ₀) of the [Bu₄ ⁿN] and substituted imidazolium cations by means of the Gaussian 98 program package. The stereoselectivity of olefination in the KOH—PhH—phase-transfer catalyst system decreases with a decrease in the r ₀ value for the catalyst cation. The possibility of recovery and reuse of ionic liquids is demonstrated.     

Evaluation of Spectroscopic and Morphological Properties of PMMA Modified with ILs

Summary: In recent years, an important class of new compounds, ionic liquids (ILs), has been investigated as additives for polymers. In this work, we carried out the synthesis of 4 different ILs: 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM.BF₄), 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM.PF₆), and the chiral ILs acetyl-(−)menthol-1-buthylimidazole tetrafluoroborate ([amebim]BF₄) and acetyl-(−)menthol-1-buthylimidazole hexafluorophosphate ([amebim]PF₆). These ILs were added to poly(methyl methacrylate) (PMMA) in 10, 20 and 30% ratios by weight and the ILs, PMMA and the obtained materials (PMMA:ILs) were characterized by infrared, visible spectroscopy and atomic force microscope. The ILs added to PMMA did not provide significant changes in the infrared spectra, compared to pure PMMA. However, the absorption spectra in the visible region of the PMMA:ILs materials showed differences, compared to the spectrum of pure PMMA.     

Thermophysical properties of 1-hexyl-3-methyl imidazolium based ionic liquids with tetrafluoroborate, hexafluorophosphate and bis(trifluoromethylsulfonyl)imide anions

The thermophysical properties of 1-hexyl-3-methyl imidazolium based hydrophobic room temperature ionic liquids (RTILs); with tetrafluoroborate (BF₄), hexafluorophosphate (PF₆), and bis(trifluoromethylsulfonyl)imide (Tf₂N) anions, namely density ρ (298.15 to 348.15) K, dynamic viscosity η (288.2 to 348.2) K, surface tension σ (298.15 to 338) K, and refractive index n_D (302.95 to 332.95) K have been measured. The coefficients of thermal expansion α_p values were calculated from the experimental density data using an empirical correlation. The thermal stability of all ILs is also investigated at two different heating rates (10 and 20) °C · min⁻¹) using thermogravimetric analyzer (TGA). The experimental results presented in this study reveal that the choice of anion type shows the most significant effect on the properties of ILs. The chloride and water contents of ILs (as impurities) are also investigated and reported in the present work.     

A Bloembergen–Purcell–Pound <Superscript>13</Superscript>C NMR relaxation study of the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate

The molecular structure and rotational motion of the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) were studied over a wide temperature range using the Bloembergen–Purcell–Pound ¹³C NMR spin–lattice relaxation method and NOE factors. Examination of the spin–lattice relaxation times (T ₁) and the rates (R ₁=1/T ₁) of the 1-butyl-3-methylimidazolium cation reveals the relative motions of each carbon in the imidazolium cation. The rotational characteristics of the [BMIM] cation are supported by ab-initio molecular structures of [BMIM][PF6] using density functional theory (DFT) and Hartree–Fock (HF) methods. The ab-initio gas phase structures of [BMIM][PF6] indicate that the 1-butyl-3-methylimidazolium C2 hydrogen, the ring methyl group, and the butyl side-chain hydrogen atoms form hydrogen bonds with the hexafluorophosphate anion.     

Solubility of Solid 1-Hexyne in Liquid Argon and Nitrogen at the Standard Boiling Points of the Solvents

The solubilities of solid 1-hexyne in liquid argon at 87.3 and in liquid nitrogen at 77.4 K have been measured by the filtration method. The hydrocarbon contents in solutions were determined using gas chromatography. GC–MS was used to identify impurities in 1-hexyne. The experimental value of the mole fraction solubility of solid 1-hexyne in liquid argon at 87.3 K is (0.85 ± 0.19) × 10^–7 and (1.25 ± 0.08) × 10^–8 in liquid nitrogen at 77.4 K. The Preston–Prausnitz method was used for calculation of the solubilities of solid hydrocarbon in liquid argon in the temperature range 84.0–110.0 K and in liquid nitrogen from 64.0 to 90.0 K. The solvent–solute interaction parameters l ₁₂ were also calculated. At 90.0 K liquid argon is a better solvent for solid 1-hexyne than is liquid nitrogen.     

Solubility of 1-Pentene Ice in Liquid Nitrogen and Argon at the Standard Boiling Points of the Solvents

The solubilities of 1-pentene ice in liquid nitrogen at a temperature of 77.4 K and in liquid argon at 87.3 K have been measured by the filtration method. The 1-pentene content in solution was determined using gas chromatography. The experimental value of the mole fraction solubility of 1-pentene ice in liquid nitrogen at 77.4 K is: (1.28±0.25)×10^–7 and (4.11±0.44)×10^–7 in liquid argon at 87.3 K. The Preston–Prausnitz method was used for calculation of the solubilities of 1-pentene ice in liquid nitrogen in the temperature range 64.0–90.0 K and in liquid argon in the temperature range 84.0–90.0 K. The parameters l ₁₂ were also calculated. At 90.0 K liquid argon is the better solvent for 1-pentene ice than is liquid nitrogen.     

Stability of Ag<Superscript>+</Superscript> Complexes with Cryptand 222 in Ionic Liquids

Stability constants of silver(I) complexes with cryptand 222 were measured in a number of ionic liquids, applying potentiometric titration. The ionic liquids were based on 1-butyl-3-methylimidazolium, 1-ethyl-3-methylimidazolium, 1-butyl-1-methyl-pyrrolidinium and 1-methyl-1-propyl-pyrrolidinium cations, as well as on tetrafluoroborate, triflate and bis(trifluoromethane sulfonyl) imide. The stability constants, expressed in log K scale, were within the broad range of 8.4–17.2. The formation of the Ag⁺222 cryptates was not detected in ionic liquids based on halide anions. Free enthalpy of silver(I) transfer from dimethylsulfoxide as a reference molecular solvent to ionic liquids was calculated applying the cryptate assumption. The results were discussed in terms of the competition between silver(I) complexation by ion forming ionic liquid and its complexation by cryptand 222.in final form: 6 December 2004This revised version was published online in July 2005 with a corrected issue number.     

Solubility of Solid 2,3-Dimethylbutane and Cyclopentane in Liquid Argon and Nitrogen at the Standard Boiling Points of the Solvents

The solubilities of solid 2,3-dimethylbutane and cyclopentene in liquid argon at a temperature of 87.3 K and in liquid nitrogen at 77.4 K have been measured by the filtration method. The hydrocarbon contents in solutions were determined using gas chromatography. GC–MS was used to identify impurities in solutes. The experimental value of the mole fraction solubility of solid 2,3-dimethyl-butane in liquid argon at 87.3 K is (8.26 ± 1.60) × 10^–6 and (2.77 ± 0.94) × 10^–8 in liquid nitrogen at 77.4 K. The experimental value of the mole fraction solubility of solid cyclopentene in liquid argon at 87.3 K is (5.11 ± 0.44) × 10^–6 and (4.60 ± 0.76) × 10^–8 in liquid nitrogen at 77.4 K. The Preston–Prausnitz method was used for calculation of the solubilities of solid hydrocarbons in liquid argon in the temperature range 84.0–110.0 K and in liquid nitrogen from 64.0 to 90.0 K. The solvent–solute interaction parameters l ₁₂ were also calculated. At 90.0 K liquid argon is a better solvent for investigated solid hydrocarbons than is liquid nitrogen.     

Electropolymerization of ionic liquid substituted polyphenylene as supercapacitors materials

A new type of polyphenylene, ionic liquid (IL) 1,3-methylimidazolium hexafluorophosphate substituted, has been prepared by electrodeposition on Au electrode surface via pulse galvanostatic method in 1-butyl-3-methylimidazolium hexafluorophosphate solution. The obtained polymer film had a spherulitic morphology with smallest grains of around 500 nm. Infrared spectrometry revealed that polyphenylene was deposited to a certain extent. The capacitive behavior of the IL substituted polyphenylene was investigated by cyclic voltammetry (CV) and galvanostatic charge–discharge method in 0.2 mol L⁻¹ H₂SO₄ aqueous solutions or pure IL [bmim]PF₆. The specific capacitance of the polymer at the charge–discharge current density of 1 mA cm⁻² equaled 206 F g⁻¹ in acidic aqueous solution or 164 F g⁻¹ in [bmim]PF₆. Additionally, excellent charge–discharge cycle stability (over 85% value of specific capacitance remained after 600 charge–discharge cycles) and power characteristics of the polymer electrode were observed in both electrolytes.     

Liquid Phase Behavior in Systems of 1-Butyl-3-alkylimidazolium bis{(trifluoromethyl)sulfonyl}imide Ionic Liquids with Water: Influence of the Structure of the C5 Alkyl Substituent

In the present paper a study of the liquid phase behavior in aqueous systems of imidazolium-based ionic liquids (ILs) with the bis{(trifluoromethyl)sulfonyl}imide anion is addressed. To highlight the influence of the C5 alkyl side group structure on their properties, a series of ILs with linear, branched, and cyclic substituents was studied. As was already shown in our previous work, very subtle changes in the cation structure at the molecular scale can have a significant and unexpected impact on the bulk properties. Therefore, in this work, the mutual solubilities of 1-butyl-3-alkylimidazolium bis{(trifluoromethyl)sulfonyl}imide ionic liquids and water were studied, both experimentally and by modeling, at atmospheric pressure as a function of temperature from 293.15 to 328.15 K. The solubilities of the ionic liquids in water are very low, typically around 10^?5 mole fraction units and were measured by a direct analytical method, making use of UV–Vis spectrophotometry. The solubilities of water in the ionic liquids were found to be around 0.20 mole fraction units and were measured using the cloud-point method. In addition to the experimental data, the liquid–liquid equilibria in the systems were modeled using the COSMO-RS methodology. Phase diagrams and the critical solution points were also estimated by applying the universal scaling laws based on the 3D Ising model, taking into account the non-linearity of the diameter and crossover to mean-field behavior.     

Synthesis of derivatives of prenylacetic acids by reactions of alkyl malonate, cyanoacetate, and acetoacetate with alkylating reagents in ionic liquids

A method for the synthesis of carboxylic acid derivatives containing one or two —CH₂CH _n (Me)CH _n+1CH₂— fragments (n = 0, 1) was developed. The method is based on the alkylation of (di)alkyl malonates, cyanoacetates, and acetoacetates with acyclic prenyl halides in ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate and tetrafluoroborate. For the ambident ethyl acetoacetate anion, the reactions with prenyl halides devoid of a double bond in the allylic position relative to the halogen atom carried out in the ionic liquids give mixtures of C- and O-alkylation products, while in the case of allylic prenyl halides, only C-alkylation products are formed. The reactions of ethyl 2-geranylmalonate and 2-geranylacetoacetate with bromocyclohexane and 1-chloro-3-dimethylaminopropane in ionic liquids provided derivatives of pharmacologically active geranylacetic acids. The product yields are higher than those in molecular organic solvents. The ionic liquids were recovered and reused in the alkylation.     

Increased paraoxon detection by acetylcholinesterase inactivation with ionic liquid additives

This is the first study using ionic liquids (ILs) as additive in the aqueous solvent medium for detection of paraoxon by acetylcholinesterase inhibition method. A systematic comparison of various ILs with organic solvents has been made. The aqueous buffer solution containing ionic liquid ethylpyridinium hexafluorophosphate [EtPy]⁺[PF₆]⁻ has been found to give the best results. The inhibition kinetic follows the first order model. Ionic liquids modified aqueous solutions show the potential to provide a promising and effective medium in detection of paraoxon with acetylcholinesterase.