An enantiospecific approach to tricyclic sesquiterpenes mayurone and thujopsenes

An enantiospecific approach to mayurone and thujopsenes, sesquiterpenes containing three contiguous quaternary carbon atoms, starting from (R)-carvone (8), is described. (S)-3,4,4-Trimethylcarvone (7), obtained from (R)-carvone, was transformed into the bicyclo[2.2.2]octanone 13 via regioselective intramolecular alkylation of the allyl bromide 11. Regioselective ozonolysis and Criegee fragmentation of the bicyclic ketone 13 furnished the keto ester 14. Reductive deoxygenation followed by one-carbon homologation transformed the keto ester 19 into the ester 6. Intramolecular cyclopropanation of the diazo ketone 25, derived from the acid 5, furnished (-)-dihydromayurone (4), thus constituting a formal enantiospecific synthesis of mayurone and thujopsenes.     

Application of Fast Radical Rearrangement in the Mechanistic Investigation of Intramolecular C-H Insertion by Rh(Ⅱ)-Mediated Carbenoids

IntramolecularC-HinsertionbyRh(II)-mediatedcarbenoidhasbecomeareactionofconsiderableimportanceinrecentyears'.InadditiontoitsnumeroussyntheticaPplications',therehavebeenextensiveinvestigationsonthemechanismofthisreaction3.AlthoughithasbeengenerallybeIievedthattheC-Hinsertionproceedsthroughaconcertedmechanism,thesuspicionexistSthatradicalorionicpairsndghtbeinvolvedinthereaction.Forexample,DoyIe"andPirrung,'reportedthattheC-HinsertionscatalyzedbyRh2(O2CCF3)4proceededwithstatisticalproduct…     

Cycloaddition chemistry of 2-vinyl-substituted indoles and related heteroaromatic systems

[reaction: see text] The intramolecular Diels-Alder cycloaddition reaction (IMDAF) of several N-phenylsulfonylindolyl-substituted furanyl carbamates containing a tethered pi-bond on the indole ring were examined as an approach to the iboga alkaloid catharanthine. Only in the case where the tethered pi-bond contained two carbomethoxy groups did the [4 + 2]-cycloaddition occur. Push-pull dipoles generated from the Rh(II)-catalyzed reaction of diazo imides, on the other hand, undergo successful intramolecular 1,3-dipolar cycloaddition across both alkenyl and heteroaromatic pi-bonds to provide novel pentacyclic compounds in good yield and in a stereocontrolled fashion. The facility of the cycloaddition was found to be critically dependent on conformational factors in the transition state. Ligand substitution in the rhodium(II) catalyst markedly altered the product ratio between [3 + 2]-cycloaddition and intramolecular C-H insertion. The variation in reactivity reflects the difference in electrophilicity between the various rhodium carbenoid intermediates. Intramolecular C-H insertion is enhanced with the more electrophilic carbene generated using Rh(II) perfluorobutyrate.     

Anomalous intramolecular C-H insertion reactions of rhodium carbenoids: factors influencing the reaction course and mechanistic implications

The intramolecular insertion of rhodium carbenoids into the alpha-C-H bonds of allylic ethers to give 3(2H)-furanones has been explored. Cyclopropanation is favored irrespective of the complex used for carbenoid generation or the substitution pattern of the allylic ether, unless a substituent is placed on the tether connecting the ether to the alpha-diazo ketone. Unusual acetal products resulting from an anomalous C-H insertion process are obtained in addition to the expected 3(2H)-furanones formed by conventional carbenoid C-H insertion. These acetals are the favored C-H insertion products in certain circumstances and particularly in cases where carbenoid generation is effected using an electron-deficient rhodium complex. Experiments with simple deuterium labeled substrates reveal that anomalous C-H insertion products arise by a mechanism that is distinct from that leading to the formation of conventional C-H insertion products. The formation of acetal products and the outcome of reactions performed using deuterium-labeled substrates suggest that a mechanism involving hydride migration to the rhodium center of the carbenoid is operative.     

Transition-metal-catalyzed group transfer reactions for selective C-H bond functionalization of artemisinin

Three types of novel artemisinin derivatives have been synthesized through transition-metal-catalyzed intramolecular carbenoid and nitrenoid C-H bond insertion reactions. With rhodium complexes as catalysts, lactone 11 was synthesized via carbene insertion reaction at the C16 position in 90% yield; oxazolidinone 13 was synthesized via nitrene insertion reaction at the C10 position in 87% yield based on 77% conversion; and sulfamidate 14 was synthesized via nitrene insertion reaction at the C8 position in 87% yield.     

Synthesis of 2-deoxy-α-DAH based on diazo chemistry by insertion reactions of 2-diazo-3-deoxy- -arabino-heptulosonate derivatives mediated by rhodium(II)

The synthesis of 2-deoxy-α-DAH (2) is described based on the use of diazo chemistry as previously reported by us during the synthesis of the corresponding 2-deoxy-KDO. Initially, the -arabino-aldehydo sugar derivative 3 was reacted with ethyl diazoacetate, using diethyl zinc as promoter. The corresponding β-hydroxy-α-diazo ester 4, obtained in very good yield, was transformed into the corresponding 2-diazo-3-deoxy-heptulosonate derivative 10, which was subjected to the action of rhodium(II). However, the major compound obtained in this reaction was the C-glycofuranoside 12 by the interaction of the benzyl protecting group employed at the OH of C-4 with the carbenoid generated at C-2. To avoid this undesired insertion reaction, aldehyde 13 was selected as a suitable starting material and, following the same chemistry than for 3, diazo 19 was efficiently synthesized. Finally, the intramolecular OH insertion mediated by rhodium(II) of 19 provided the targeted 2-deoxy-DAH derivative 21 in a reasonable good yield, which was finally transformed into the potassium salt of 2-deoxy-α-DAH 2.     

Convenient synthesis of polyfunctionalized beta-fluoropyrroles from rhodium(II)-catalyzed intramolecular N-H insertion reactions

Polyfunctionalized beta-fluoropyrrole can be readily prepared from rhodium(II) acetate-catalyzed intramolecular N-H insertion reaction of delta-amino-gamma,gamma-difluoro-alpha-diazo-beta-ketoesters. A cyanomethylene group can be introduced at C-3 of the pyrrole ring through the Wittig reaction of the diazo compounds followed by rhodium(II)-catalyzed intramolecular N-H insertion reactions.     

A formal total synthesis of (±)-9-isocyanoneopupukeanane

A formal total synthesis of the marine sesquiterpene (±)-9-isocyanoneopupukeanane starting from the readily available monoterpene carvone has been accomplished employing a combination of intermolecular Michael addition-intramolecular Michael addition reaction and an intramolecular rhodium carbenoid C-H insertion reaction as key steps, and identifying the isopropenyl group as a masked hydroxy group.     

Rhodium-catalyzed intramolecular [4 + 2] cycloadditions of alkynyl halides

[reaction: see text] Cationic rhodium(I)-catalyzed intramolecular [4 + 2] cycloadditions of diene-tethered alkynyl halides were found to occur in good yields (70-87%). The halide moiety is compatible with the cycloaddition reactions, and no oxidative insertion to the alkynyl halide was observed. The halogen-containing cycloadducts could be transformed into a variety of products that are difficult or impossible to obtain via direct cycloaddition.     

Rhenium-catalyzed formation of indene frameworks via C-H bond activation: [3+2] annulation of aromatic aldimines and acetylenes

A rhenium complex, [ReBr(CO)3(thf)]2, catalyzes the reaction of an aromatic aldimine with an acetylene to give an indene derivative in a quantitative yield. The reaction proceeds via C-H bond activation, insertion of the acetylene, intramolecular nucleophilic cyclization, and reductive elimination. In contrast to ruthenium and rhodium catalysts, which are usually employed in this type of reaction, the rhenium catalyst promotes the intramolecular nucleophilic cyclization of the alkenylmetal species generated by insertion of the acetylene.     

Investigation on the regioselectivities of intramolecular oxidation of unactivated C-H bonds by dioxiranes generated in situ

We found that dioxiranes generated in situ from ketones 1-6 and Oxone underwent intramolecular oxidation of unactivated C-H bonds at delta sites of ketones to yield tetrahydropyrans. From the trans/cis ratio of oxidation products 1a and 2a as well as the retention of the configuration at the delta site of ketone 5, we proposed that the oxidation reaction proceeds through a concerted pathway under a spiro transition state. The intramolecular oxidation of ketone 6 showed the preference for a tertiary delta C-H bond over a secondary one. This intramolecular oxidation method can be extended to the oxidation of the tertiary gamma' C-H bond of ketones 9 and 10. For ketone 11 with two delta C-H bonds and one gamma' C-H bond linked respectively by a sp(3) hydrocarbon tether and a sp(2) ester tether, the oxidation took place exclusively at the delta C-H bonds. Finally, by introducing proper tethers, regioselective hydroxylation of steroid ketones 12-14 have been achieved at the C-17, C-16, C-3, and C-5 positions.     

Asymmetric synthesis of (-)-eburnamonine and (+)-epi-eburnamonine from (4S)-4-ethyl-4-[2-(hydroxycarbonyl)ethyl]-2-butyrolactone.

The key chiral nonracemic 4,4-disubstituted 2-butyrolactone carboxylic acid, (S)-4, is readily accessible via an efficient and stereospecific dirhodium(II) tetraacetate catalyzed tertiary C-H insertion reaction of the diazomalonate (S)-5. The coupling of the acid (S)-4 with tryptamine produces the amide (S)-3, which is then transformed into the aldehyde 23 and hydroxy-lactam 24. Acid-mediated Pictet-Spengler cyclization of 23 and 24 produces the tetracyclic indole lactams (1S,12bS)-25a and (1S,12bR)-25b. Compounds 25a and 25b are converted, via the lactam alcohols 30a and 30b, to (-)-eburnamonine (1a) and (+)-epi-eburnamonine (1b).     

Chiral synthons from α-pinene: enantioselective syntheses of bicyclo[3.3.0] and [3.2.1]octanones

Enantioselective syntheses of bicyclo[3.3.0]octan-3-one, bicyclo[3.2.1]octan-3-one and bicyclo[3.2.1]octan-2-one derivatives were accomplished by employing a chiron based approach, using intramolecular rhodium carbenoid C–H insertion, acid catalysed cyclisation of α-diazo ketone and intramolecular type II carbonyl ene reactions as key steps.     

Eine Synthese methylierter Epoxyhydroazulenone durch intramolekulare [4 + 3]-Cycloaddition einer aus 1,1-Dichloro-6-(3-methylfur-2-yl)hexan-2-on erzeugten Oxyallyl-Zwischenstufe

A synthesis of Methylated Epoxyhydroazulenones by Intramolecular [4 + 3] Cycloaddition of an Oxyallyl Intermediate, Generated from 1,1-Dichloro-6-(3-methyl-2-furyl)hexan-2-one (Z)-3-Methylpent-2-en-4-yn-1-ol ( 7 ) was transformed to 2-(4-chlorobutyl)-3-methylfuran ( 4b ) and 2-(but-3-enyl)-3-methylfuran ( 10a ) by C-alkylation and 5-exo-dig cyclization. The Grignard derivative formed from 4b gave 1,1-dichloro-6-(3-methylfur-2-yl)hexan-2-onc ( 1b ) on reaction with dichloroacetyl chloride. This dichloromethyl ketone undergoes a base-induced cyclization to form diastereoisomeric 7-chloro-1,2,3,6,7,8a-hexahydro-4-methyl-8H-3a,6-epoxyazulen-8-ones ( 3bα and 3bβ ) by way of an intramolecular [4+3] cycloaddition of an oxyallyl intermediate 2b. By dechlorination and hydrogenation of 3bβ , the tricyclic hydroepoxyazulenones 18 and 19 have been synthesized.     

A versatile stereoselective synthesis of endo,exo-furofuranones: application to the enantioselective synthesis of furofuran lignans

A new stereoselective route to endo,exo-2,6-diarylfurofuranones has been developed using Mn(III)-mediated intramolecular cyclopropanation and C-H insertion reactions as key C-C bond-forming steps. Mn(III)-mediated oxidative cyclization of acetoacetate derivative 11 afforded 1-acetyl-4-aryl-3-oxabicyclo[3.1.0]hexan-2-one (12) with excellent diastereocontrol (d.r. 22:1). Subsequent Lewis acid-catalyzed opening of the activated cyclopropane ring present in 12 with benzylic alcohols then gave alpha-acetyl-gamma-butyrolactones 16 and 18-20, which reacted efficiently with in situ-generated TfN(3) to secure the key alpha-diazo-gamma-butyrolactones 22-25. Highly stereoselective rhodium-catalyzed C-H insertion reactions of diazolactones 22-25 completed the synthesis of endo,exo-2,6-diarylfurofuranones 26-29 in overall yields ranging from 41 to 48% from 1-phenylallyl alcohol (+/-)-10. The approach developed for the furofuranones 26-29 was then applied to the asymmetric syntheses of four furofuran lignans, (+)-xanthoxylol (1), (+)-methylxanthoxylol (2), (+)-epipinoresinol (3), and (+)-epieudesmin (4), starting from enantiomerically enriched 1-arylallyl alcohol (S)-31.     

A dirhodium(II)-carbenoid route to (-)- and (+)-Geissman-Waiss lactone: synthesis of (1R,7R,8R)-(-)-turneforcidine.

(-)- and (+)-Geissman-Waiss lactone, 4b, was efficiently prepared via the intramolecular C-H insertion reaction of the chiral nonracemic diazoacetates (-)-5a and (+)-5b catalyzed by dirhodium(II) tetrakis[methyl (5R and 5S)-3-phenylpropanoyl-2-imidazolidinone-5-carboxylate]. The cyclization was found to proceed with excellent regioselectivity and cis-diastereoselectivity. The bicyclic lactone (-)-4b was successfully used in the synthesis of the necine base, (-)-turneforcidine 2.     

Ligand effects in the Rh(II) catalyzed reaction of α-diazo ketoamides

The rhodium(II) catalyzed decomposition of several α-diazo ketoamides resulted in either formation of a push-pull carbonyl ylide intermediate followed by intramolecular [3+2]-cycloaddition across the tethered π-bond or C-H insertion of the initially formed rhodium carbenoid into the C₅-position of the lactam ring followed by a carboethoxy-decarboxylation reaction. The chemoselectivity exhibited by the rhodium carbenoid intermediate was found to be markedly dependent on the metal ligands employed.     

α-重氮羰基化合物分解反应的机理以及合成应用

本项工作应用物理有机化学的经典方法-Hammett线性自由能相关,对在有机合成中已得到广泛应用的Rh(Ⅱ)-卡宾分子内C-H插入反应的机理进行了深入的探讨。在α-重氮羰基化合物的合成应用方面,发现了Cu(acac)2可以有效地催化α-重氮羰基化合物分解并发生选择的分子内N-H键插入反应。此外,应用α-重氮羰基化合物在Ag(Ⅰ)催化剂的作用下的Wolff重排反应可以有效地合成光学纯的α-内酰胺。     

Mechanism of C[bond]H bond activation/C[bond]C bond formation reaction between diazo compound and alkane catalyzed by dirhodium tetracarboxylate

The B3LYP density functional studies on the dirhodium tetracarboxylate-catalyzed C-H bond activation/C-C bond formation reaction of a diazo compound with an alkane revealed the energetics and the geometry of important intermediates and transition states in the catalytic cycle. The reaction is initiated by complexation between the rhodium catalyst and the diazo compound. Driven by the back-donation from the Rh 4d(xz) orbital to the C[bond]N sigma*-orbital, nitrogen extrusion takes place to afford a rhodium[bond]carbene complex. The carbene carbon of the complex is strongly electrophilic because of its vacant 2p orbital. The C[bond]H activation/C[bond]C formation proceeds in a single step through a three-centered hydride transfer-like transition state with a small activation energy. Only one of the two rhodium atoms works as a carbene binding site throughout the reaction, and the other rhodium atom assists the C[bond]H insertion reaction. The second Rh atom acts as a mobile ligand for the first one to enhance the electrophilicity of the carbene moiety and to facilitate the cleavage of the rhodium[bond]carbon bond. The calculations reproduce experimental data including the activation enthalpy of the nitrogen extrusion, the kinetic isotope effect of the C[bond]H insertion, and the reactivity order of the C[bond]H bond.     

Rh(II) catalysed intramolecular C-H insertion of diazo substrates in water: a simple and efficient approach to catalyst reuse

Water is an efficient solvent for the Rh2(OAc)4 catalysed intramolecular C-H insertion of a range of diazo substrates without competitive water insertion. Due to the high solubility and stability of the catalyst in water, the catalyst can be efficiently reused.