Synthesis and photophysical properties of models for twisted PRODAN and dimethylaminonaphthonitrile

The synthesis and photophysical properties of 7-cyano-3,4-dihydro-2H-1,4-ethano-benzo[g]quinoline and 3,4-dihydro-2H-1,4-ethano-7-propionyl-benzo[g]quinoline are reported. These compounds possess a quinuclidine substructure that locks the tertiary amino group perpendicular to the naphthalene ring. Their excited states are models for the twisted excited states of 2-(dimethylamino)-6-naphthonitrile (DMANN) and 6-propionyl-2-(dimethylamino)naphthlene (PRODAN). In contrast to DMANN and PRODAN, the fluorescence of these twisted derivatives is strongly deactivated in polar solvents. Neither DMANN nor PRODAN likely emit from TICT excited states.     

Thermodynamic binding parameters evaluated by using phase-resolved fluorescence spectrometry

Equilibrium binding constants as a function of temperature were determined for the binding of 4-amino-N-methylphthalimide (4-AMP) to β-cyclodextrin and to human and bovine serum albumins, and for 6-propionyl-2-(dimethylamino)naphthalene (PRODAN) to β-cyclodextrin, by using phase-resolved fluorimetry to eliminate errors from the significant fluorescence contribution from the free 4-AMP or PRODAN. Enthalpy and entropy values were also calculated from these experimental data.     

A PHOTOPHYSICAL STUDY OF SOLVATOCHROMIC PROBE 6-PROPIONYL-Z(N,N-DIMETHYLAMINO)NAPHTHALENE (PRODAN) IN SOLUTION

A photophysical study of 6-propionyl-2-( N,N -dimethylamino)naphthalene (PRODAN) in room-temperature solutions under various conditions is reported. The results show no unusual photophysical properties, except for an extremely large solvatochromic shift of PRODAN fluorescence spectrum. The previously reported extra blue emission band for PRODAN in an aqueous solution is identified to be due entirely to trace water-soluble impurities in the sample. The excited-state dipole moment of PRODAN is determined based on solvatochromic results using a known twisted intramolecular charge transfer (TICT) molecule p -( N,N -diethylamino)ethylbenzoate (DEAEB) as a reference to probe specific solute-solvent interactions. The possibility of TICT state formation in PRODAN is discussed, and a solvation equilibrium mechanism is proposed to account for the photophysical behavior of PRODAN.     

Phase transition affects energy transfer efficiency in phospholipid vesicles

The fluorescence quenching of 6-propionyl-2-dimethylaminonaphtalene (PRODAN) and 6-dodecanoyl-2-dimethylaminonaphtalene (LAURDAN) by octadecyl rhodamine B (ORB) in a model system of small unilamellar vesicles (SUV) of dipalmitoylphosphatidyl-choline (DPPC) was investigated. Non-linear Stern-Volmer behaviour was observed in both systems in the gel phase (25 degrees C) and in the fluid phase (50 degrees C), resulting from association processes and from static quenching. The relative quenching efficiencies of both dyes depend on the phase state of the bilayer and indicate a deeper incorporation of PRODAN and LAURDAN into the membrane in its fluid phase than in its gel phase.     

Absorption and fluorescence of PRODAN in phospholipid bilayers: a combined quantum mechanics and classical molecular dynamics study

Absorption and fluorescence spectra of PRODAN (6-propionyl-2-dimethylaminonaphthalene) were studied by means of the time-dependent density functional theory and the algebraic diagrammatic construction method. The influence of environment, a phosphatidylcholine lipid bilayer and water, was taken into account employing a combination of quantum chemical calculations with empirical force-field molecular dynamics simulations. Additionally, experimental absorption and emission spectra of PRODAN were measured in cyclohexane, water, and lipid vesicles. Both planar and twisted configurations of the first excited state of PRODAN were taken into account. The twisted structure is stabilized in both water and a lipid bilayer, and should be considered as an emitting state in polar environments. Orientation of the excited dye in the lipid bilayer significantly depends on configuration. In the bilayer, the fluorescence spectrum can be regarded as a combination of emission from both planar and twisted structures.     

Comparison between two anionic reverse micelle interfaces: the role of water-surfactant interactions in interfacial properties

The water/sodium bis(2-ethylhexyl) phosphate (NaDEHP) reverse micelle (RM) system is revisited by using, for the first time, molecular probes to investigate interface properties. The solvatochromic behavior of 1-methyl-8-oxyquinolinium betaine (QB) and 6-propionyl-2-(N,N-dimethyl)aminonaphthalene (PRODAN) in the water/NaDEHP/toluene system is studied, and the results are compared with those obtained in water/sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (AOT)/toluene RM media. The results demonstrate that the micropolarity, microviscosity, interfacial water structure, molecular probe partition, and intramolecular electron-transfer processes are dramatically altered for NaDEHP RM interfaces in comparison to the AOT systems. Because of organic nonpolar solvent penetration into the interface, NaDEHP RM media offer an interface with lower micropolarity and microviscosity than AOT media. Also, the interfacial water in the NaDEHP system shows enhanced water-water hydrogen-bond interaction in comparison with bulk water. The AOT RM interface represents a unique environment for PRODAN to undergo dual emission.     

How the environment controls absorption and fluorescence spectra of PRODAN: a quantum-mechanical study in homogeneous and heterogeneous media

The spectroscopic behavior of 6-propionyl-2-(N,N-dimethyl)aminonaphthalene (PRODAN) is investigated in different environments, ranging from homogeneous solutions of different polarities to diffuse interfaces mimicking membranes. The variety of experimental data as well as computational results present in the literature still do not clarify the nature of the emission process; in particular, it is not well-established whether fluorescence in such a molecule occurs from a planar or from a twisted intramolecular charge transfer state. The first part of the work is thus devoted to better understand how the electronic transition processes occur in homogeneous solvents. The effect of the medium polarity as well as the hydrogen bond formation are studied. In the second part of the paper, a first attempt to interpret the experimental results of PRODAN in unilamellar vesicles is carried out. The complexity of the still-open questions about the photophysics of PRODAN has prompted us to base the study on quantum-mechanical calculations performed at various levels of theory, namely, DFT, TDDFT, CIS, and SAC-CI, and to include the effects of the environment in a self-consistent way. This is achieved by using the integral equation formalism version of the polarizable continuum model (IEFPCM). IEFPCM is a quite versatile approach, being able to treat equilibrium and nonequilibrium solvation in both homogeneous and heterogeneous media.     

New insights on the behavior of PRODAN in homogeneous media and in large unilamellar vesicles

The behavior of 6-propionyl-2-dimethylaminonaphthalene (PRODAN) was studied in homogeneous media and in large unilamellar vesicles (LUVs) of the phospholipid 1,2-di-oleoyl-sn-glycero-3-phosphatidylcholine (DOPC), using absorption, emission, depolarization, and time-resolved spectroscopies. In homogeneous media, the Kamlet and Taft solvatochromic comparison method quantified solute-solvent interactions from the absorption and emission PRODAN bands. These studies demonstrate that the absorption band is sensitive to the polarity-polarizability (pi) and the hydrogen bond donor ability (alpha) parameters of the media. PRODAN in the excited state is even more sensitive to these parameters and to the hydrogen bond acceptor ability (beta) of the media. The transition energy (expressed in kcal/mol) for both absorption and emission bands gives a linear correlation with the well-known polarity parameter E(T30). The results from the absorption and emission bands also reveal that PRODAN aggregates in water. The monomer has two fluorescence lifetimes, 2.27 and 0.65 ns, while the aggregate has a lifetime of 14.6 ns. Using steady-state anisotropy measurements, the calculated volumes of the aggregate and the monomer are 5590 and 222 mL mol(-1), respectively. In DOPC LUVs, PRODAN undergoes a partition process between the water bulk and the DOPC bilayer. We show that the partition constant (K(p)) value is large enough that only at [DOPC] below 0.15 mg/mL PRODAN in water can be detected. PRODAN dissolved in LUVs at [DOPC] > 1 mg/mL exists completely incorporated in its monomer form and senses two different microenvironments within the bilayer: a polar region in the interface near the water and a less polar and also less viscous environment, between the phospholipid tails. These environments were characterized by their fluorescence lifetimes (tau), showing that PRODAN in the polar microenvironment has a tau value of approximately 4 ns while in the less polar region gives a value of 1.2 ns. Moreover, this probe also senses the micropolarity of these two different regions of the bilayer and yields values similar to that of methanol and tetrahydrofuran.     

New insights on the photophysical behavior of PRODAN in anionic and cationic reverse micelles: from which state or states does it emit?

6-propionyl-2-(N,N-dimethyl)aminonaphtahalene, PRODAN, is widely used as a fluorescent molecular probe because of its significant Stokes shift in polar solvents. It is an aromatic compound with intramolecular charge-transfer states (ICT) that can be particularly useful as a sensor. The nature of the emissive states has not yet been established despite the detailed experimental and theoretical investigations done on this fluorophore. In this work, we performed absorption, steady-state, time-resolved fluorescence (TRES) and time-resolved area normalized emission (TRANES) spectroscopies on the molecular probe PRODAN in the anionic water/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/n-heptane and the cationic water/benzyl-n-hexadecyl dimethylammonium chloride (BHDC)/benzene reverse micelles (RMs). The experiments were done by varying the surfactant concentrations at a fixed molar ratio (W = [H2O]/[Surfactant]) and changing the water content at a constant surfactant concentration. The results obtained varying the surfactant concentration at W = 0 show a bathochromic shift and an increase in the intensity of the PRODAN emission band due to the PRODAN partition process between the external solvent and the RMs interface. The partition constants, Kp, are quantified from the changes in the PRODAN emission spectra and the steady-state anisotropy () with the surfactant concentration in both RMs. The Kp value is larger in the BHDC than the AOT RMs, probably due to the interaction between the cationic polar head of the surfactant and the aromatic ring of PRODAN. The partition process is confirmed with the TRES experiments, where the data fit to a continuous model, and with the time-resolved area normalized emission spectroscopy (TRANES) spectra, where only one isoemissive point is detected. On the other hand, the emission spectra at W = 10 and 20 show a dual fluorescence with a new band that emerges in the low-energy region of the spectra, a band that was previously assigned to the PRODAN emission from the water pool of RMs. Our studies demonstrate that this band is due to the emission from an ICT state of the molecular probe PRODAN located at the interface of the RMs. These results are also confirmed by the lifetime measurements, the TRES experiments where the results fit to a two-state model, and the time-resolved area normalized emission spectroscopy (TRANES) spectra where three or two isoemissive points are detected in the AOT and BHDC RMs, respectively. In the AOT RMs, Kp values obtained at W = 10 and 20 are almost independent of the water content; the values are higher for the BHDC RMs due to the higher micropolarity of this interface.     

Fluorescence studies in a pyrrolidinium ionic liquid: polarity of the medium and solvation dynamics

While the imidazolium ionic liquids have been studied for some time, little is known about the pyrrolidinium ionic liquids. In this work, steady-state and picosecond time-resolved fluorescence behavior of three electron donor-acceptor molecules, coumarin-153 (C153), 4-aminophthalimide (AP), and 6-propionyl-2-dimethylaminonaphthalene (PRODAN), has been studied in a pyrrolidinium ionic liquid, N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide, abbreviated here as [bmpy][Tf2N]. The steady-state fluorescence data of the systems suggest that the microenvironment around these probe molecules, which is measured in terms of the solvent polarity parameter, E(T)(30), is similar to that in 1-decanol and that the polarity of this ionic liquid is comparable to that of the imidazolium ionic liquids. All three systems exhibit wavelength-dependent fluorescence decay behavior, and the time-resolved fluorescence spectra show a progressive shift of the fluorescence maximum toward the longer wavelength with time. This behavior is attributed to solvent-mediated relaxation of the fluorescent state of these systems. The dynamics of solvation, which is studied from the time-dependent shift of the fluorescence spectra, suggests that approximately 45% of the relaxation is too rapid to be measured in the present setup having a time resolution of 25 ps. The remaining observable components of the dynamics consist of a short component of 115-440 ps (with smaller amplitude) and a long component of 610-1395 ps (with higher amplitude). The average solvation time is consistent with the viscosity of this ionic liquid. The dynamics of solvation is dependent on the probe molecule, and nearly 2-fold variation of the solvation time depending on the probe molecule could be observed. No correlation of the solvation time with the probe molecule could, however, be observed.     

An example of how to use AOT reverse micelle interfaces to control a photoinduced intramolecular charge-transfer process

6-Propionyl-2-(N,N-dimethyl)aminonaphtahalene, PRODAN, is widely used as a fluorescent molecular probe due to its significant Stokes shift in polar solvents. It is an aromatic compound with intramolecular charge-transfer (ICT) states which can be particularly useful as sensors. In this work, we performed absorption, steady-state, time-resolved fluorescence (TRES), and time-resolved area normalized emission (TRANES) spectroscopies on PRODAN dissolved in nonaqueous reverse micelles. The reverse micelles are composed of polar solvents/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/n-heptane. Sequestered polar solvents included ethylene glycol (EG), propylene glycol (PG), glycerol (GY), formamide (FA), dimethylformamide (DMF), and dimethylacetamide (DMA). The experiments were performed with varying surfactant concentrations at a fixed molar ratio W(S) = [polar solvent]/[AOT]. In every reverse micelle studied, the results show that PRODAN undergoes a partition process between the external solvent and the reverse micelle interface. The partition constants, K(p), are quantified from the changes in the PRODAN emission and/or absorption spectra with the surfactant concentration. The K(p) values depend strongly on the encapsulated polar solvent and correlate quite well with the AOT reverse micelle interface's zones where PRODAN can exist and emits. Thus, the partition toward the reverse micelle interface is strongly favored in DMF and DMA containing micelles where the PRODAN emission comes only from an ICT state. For GY/AOT reverse micelles, the K(p) value is the lowest and only emission from the local excited (LE) state is observed. On the other hand, for EG/AOT, PG/AOT, and water/AOT reverse micelles, the K(p) values are practically the same and emission from both states (LE and ICT) is simultaneously detected. We show here that it is possible to control the PRODAN state emission by simply changing the properties of the AOT reverse micelle interfaces by choosing the appropriate polar solvent to make the reverse micelle media. Indeed, we present experimental evidence with the answer to the long time question about from which state does PRODAN emit, a process that can be controlled using the unique reverse micelle interfaces properties.     

An Alternative Approach to Quantify Partition Processes in Confined Environments: The Electrochemical Behavior of PRODAN in Unilamellar Vesicles

Herein, we investigate the behavior of the electroactive molecular probe 6‐propionyl‐2‐dimethyl amino naphthalene (PRODAN) in large unilamellar vesicles (LUV) formed with the phospholipid 1,2‐di‐oleoyl‐sn‐glycero‐3‐phosphatidylcholine (DOPC) by using cyclic voltammetry (CV). The CV studies in pure water confirm our previous spectroscopic results that PRODAN self‐aggregates due to its low water solubility. Moreover, the electrochemical results also reveal that the PRODAN aggregated species are non‐electroactive within the studied electrochemical potential region. In DOPC LUV media, the redox behavior of PRODAN shows how the LUV bilayer interacts with PRODAN aggregated species to form PRODAN monomer species. Moreover, the electrochemical response of PRODAN allows us to propose a model for explaining the electrochemical experimental results and—in conjunction with our measurements—for calculating the value of the partition constant (K_p) of PRODAN between the water and LUV bilayer pseudophases. This value coincides with that obtained through an independent technique. Moreover, our electrochemical model allows us to calculate the diffusion coefficient (D) for the DOPC LUV, which coincides with the D value obtained through dynamic light scattering (DLS). Thus, our data clearly show that electrochemical measurements could be a powerful alternative approach to investigate the behavior of nonionic electroactive molecules embed in a confined environment such as the LUV bilayer. Moreover, we believe that this approach can be used to investigate the behavior of non‐optical molecular drugs embedded in bilayer media.     

Improved biocompatibility of protein encapsulation in sol–gel materials

By using the fluorescent dye 6-propionyl-2-(N,N-dimethylamino) naphthalene (PRODAN) to monitor methanol generated during tetramethyl orthosilicate polymerization we have optimised the encapsulation of protein in silica sol–gel monoliths with respect to completion of hydrolysis and distillation in order to remove methanol such that protein can be added without denaturation. A minimum of 24 h at +4 °C was found to be required before hydrolysis is complete and 3–5 min of vacuum distillation at 50 °C and 300 mbar needed to remove methanol before the gel is formed. The biocompatibility of a tetramethyl orthosilicate sol–gel monolith was demonstrated by preserving the trimer protein allophycocyanin (APC) in its native form for up to 500 h. This obviates the previously essential requirement of covalently binding the trimer together in order to prevent dissociation into monomers and has enabled observation of native APC trimer in a sol–gel pore for the first time down to the single molecule level using combined fluorescence spectroscopy and confocal microscopy. The higher stability afforded by the protocol we describe could impact on the application of sol–gel materials to single-molecule studies of wider bearing such as protein folding and aggregation.     

Solvatochromism and fluoride sensing of thienyl-containing benzodiazaboroles

Static and time-resolved fluorescence studies were carried out to investigate the photophysical properties and fluoride sensing abilities of highly fluorescent thienyl-containing 1,3-diethyl-1,3,2-benzodiazaboroles. Absorption and fluorescence spectra were measured in various solvents, showing the fluorophores to emit in the visible wavelength region with colors varying from blue to orange and quantum yields ranging between 0.21 and 1. Measured Stokes shifts of 2898 cm(-1) to 9308 cm(-1) were used to calculate the difference between excited- and ground-state dipole moments of the fluorophores. Values up to 18.8 D are of the same magnitude as for designed polarity probes such as PRODAN, supporting the idea of internal charge transfer transitions. Quenching studies with pyridine observing static and time-resolved fluorescence revealed a purely dynamic quenching mechanism and low Lewis acidity of the boron within the benzodiazaborolyl moiety compared to other triarylboranes. In contrast to this, quenching with fluoride was shown to stem from adduct formation. Reversible complexation of fluoride follows a simple mechanism for multi-functionalized benzodiazaboroles 2b and 2c, while those containing only one benzodiazaborole moiety (1 and 2a) show a more complicated behaviour, which might be explained by aggregation. Combining a benzodiazaborole group and a dimesitylborane function results in spectrally switchable fluoride sensors 3a and 3b, since the two boron sides can be deactivated for fluorescence in a stepwise manner.     

ASSESSMENT OF DIELECTRIC ENRICHMENT AROUND TWO FLUOROPHORES IN BINARY SOLVENTS

Abstract We investigated dielectric enrichment, or the preferential interaction between a probe and a polar solvent, using two different fluorophores in binary solvents that will not form strong hydrogen bonds with the probe. The first probe, 6-propionyl( N,N -dimethylamino)naphthalene (PRODAN), undergoes a large change in dipole moment in the excited state. We found that its emission energy varies linearly with the dielectric parameter f(D) [f(D) = 2(D - 1)/(2D + 1)] in acetone/benzene and acetonekyclohexane mixtures. The emission of the second probe, N-acetyl tryptophanamide (NATA), also varies linearly with f (D) in ethylether/acetonitrile solvents. This lack of preferential solvation was further investigated by studies of NATA in acetonitrile/methanol mixtures where hydrogen bonding is possible. We found that NATA-methanol interactions are not energetic enough to give rise to significant preferential solvation. Since preferential solvation does not occur even for weakly hydrogen bonding solvents it is thus highly unlikely that dielectric enrichment, which takes place in the absence of specific interactions, occurs with any frequency. We postulate that previous reports of dielectric enrichment were due to a lack of consideration of changes in f (D) of the solvent.     

Resolved fluorescence emission spectra of PRODAN in ethanol/buffer solvents

The fluorescence steady-state emission spectra of lipophilic fluorescence probe PRODAN in ethanol/buffer solvents of different concentrations (0.3, 0.9, 3 mol L(-1) ethanol) were extensively studied and analytically described. The complex experimental spectra, corrected for background effects, were fitted by two Gaussian curves. The energy separation of two maxima, (0.147+/-0.002) eV at 37 degrees C and (0.143+/-0.003) eV at 25 degrees C, was independent of ethanol concentration. The blue shifts observed for both maxima were linearly dependent on solvent polarity. The linear dependences of fluorescence's intensities on PRODAN concentration in all ethanol/buffer solvents indicate that no PRODAN self-quenching takes place even at the highest measured PRODAN concentrations.     

Synthese und Kristallstruktur der Hydroxy-lactone von 6-Methyl-2-propionyl- und 3-Methyl-2-propionylbenzoesäure

The isomers 6-methyl-2-propionyl- and 3-methyl-2-propionylbenzoic acid were synthesized and separated by DCC (droplet counter-current) chromatography. The crystal structure analyses showed that these compounds are hydroxylactones in the solid state.     

Synthesis of Exo-Brevicomin. Application of Organoaluminum Reagents to Synthesis

The use of hindered trialkylaluminum reagents is found to result in stereoselective reduction of the carbonyl group of 2-propionyl-6-methyl-3, 4-dihydro-2H-pyran.     

Substituted benzoxadiazoles as fluorogenic probes: a computational study of absorption and fluorescence

General chemical strategies which provide controlled changes in the emission or absorption properties of biologically compatible fluorophores remain elusive. One strategy employed is the conversion of a fluorophore-attached alkyne (or azide) to a triazole through a copper-catalyzed azide-alkyne coupling (CuAAC) reaction. In this study, we have computationally examined a series of structurally related 2,1,3-benzoxadiazole (benzofurazan) fluorophores and evaluated changes in their photophysical properties upon conversion from alkyne (or azide) to triazole forms. We have also determined the photophysical properties for a known set of benzoxadiazole compounds. The absorption and emission energies have been determined computationally using time-dependent density functional theory (TD-DFT) with the Perdew, Burke, and Ernzerhof exchange-correlation density functional (PBE0) and the 6-31+G(d) basis set. The TD-DFT results consistently agreed with the experimentally determined absorption and emission wavelengths except for certain compounds where charge-transfer excited states occurred. In addition to determining the absorption and emission wavelengths, simple methods for predicting relative quantum yields previously derived from semiempirical calculations were reevaluated on the basis of the new TD-DFT results and shown to be deficient. These results provide a necessary framework for the design of new substituted benzoxadiazole fluorophores.     

Investigation of heterocycles containing nitrogen or sulfur. 48. Derivatives of 1-morpholinooxalyl-1,2-dihydrothiazolo-[5,4-b]pyridine,their structure,and reactions

The structures of the products of reactions of 1-N-morpholinooxahi-1,2-dihydrothiazolo-[5,4-b]pyridine have been studied by IR, NMR, UV, and mass spectroscopy. Geometric (cis-anti) and rotational (about the CO-N amide bond) isomers of 1-N-morpholinooxalyl-2-propionyi-5-chloro-1,2-dihydrothiazolo-[5,4-b]pyridine oxime have been observed and studied. Treatment of 1-N-morpholinooxalyl-2-propionyl-5-chloro-1,2-dihydrothiazolo[5,4-b]pyridine with ethanolic alkali gave 2-propionyl-5-chlorothiazolo-[5,4-b]pyridine, while treatment with concentrated H₂SO₄ gave 1,2-dioxo-ethylidene-7-chloroxazolidino[3,2-f]pyrido[2,3-b]1,4-thiazine.For Communication 47 see [1].Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1133–1138, August, 1993.