Microstructure and structural transition in microemulsions stabilized by aldonamide-type surfactants

Significant efforts were undertaken to characterize the microstructure and structural properties of water-in-oil (w/o), oil-in-water (o/w), and bicontinuous (bc) microemulsions composed of N-alkyl-N-methylgluconamides (n-alkyl = n-C(12)H(25), n-C(14)H(29), n-C(16)H(33)) and n-alcohols (ethanol, n-propanol, n-butanol) or iso-alcohols (iso-propanol, iso-butanol) as cosurfactants, as well as iso-octane and water. The internal structure of so created four-component system was elucidated by means of an analysis of isotropic area magnitudes in phase diagrams and conductivity measurements. Dynamic light scattering (DLS) measurements provided the microemulsion size and polydispersity. Polarity and viscosity of microemulsion microenvironment were acquired by means of electron paramagnetic resonance (EPR), UV-vis absorption spectroscopy (in the case of w/o droplets), and steady-state fluorescence (SSF) (in the case of o/w droplets). The results show that both the surfactant and the cosurfactant types affect the shape and extent of microemulsions. The size of droplets depends strongly on the type of examined microemulsion and the type of cosurfactant (linear or brunched) but is almost independent of the length of the surfactant alkyl chain. The size of microemulsion droplets ranges from 8.1 to 22.6 nm and from 3.7 to 14.3 nm respectively, for o/w and o/w microemulsions, making them good candidates for both template-based reactions and household components solubilizing media.     

Poly(ethyleneimine) as reducing and stabilizing agent for the formation of gold nanoparticles in w/o microemulsions

This paper is focused on the use of branched poly(ethyleneimine) (PEI) as reducing as well as stabilizing agent for the formation of gold nanoparticles in different media. The process of nanoparticle formation was investigated, in the absence of any other reducing agents, in microemulsion template phase in comparison to the nucleation process in aqueous polymer solution.

On the one hand, it was shown that the polyelectrolyte can be used for the controlled single-step synthesis and stabilization of gold nanoparticles via a nucleation reaction and particles with an average diameter of 7.1 nm can be produced.

On the other hand, it was demonstrated that the polymer can also act as reducing and stabilizing agent in much more complex systems, i.e. in water-in-oil (w/o) microemulsion droplets. The reverse microemulsion droplets of the quaternary system sodium dodecylsulfate (SDS)/toluene–pentanol (1:1)/water were successfully used for the synthesis of gold nanoparticles. The polymer, incorporated in the droplets, exhibits reducing properties, adsorbs on the surface of the nanoparticles and prevents their aggregation. Consequently, nanoparticles of 8.6 nm can be redispersed after solvent evaporation without a change of their size.

Nevertheless, the polymer acts already as a “template” during the formation of the nanoparticles in water and in microemulsion, so that an additional template effect of the microemulsion is not observed.

The particle formation for both methods is checked by means of UV–vis spectroscopy and the particle size and size distribution are investigated via dynamic light scattering and transmission electron microscopy (TEM).     

Length scale effect of PCL-PB-PCL on the light scattering and dynamics of network

The effect of length scale of triblock oil-soluble polymer (poly (ε-caprolactone)–poly butadiene-poly (ε-caprolactone)) (PCL-PB-PCL) on the properties of a water-in-oil (W/O) droplet microemulsion (R ~ 5.5 nm) has been studied as a function of the amount of added telechelic polymer. Small-angle X-ray scattering (SAXS) measurements show that the size of the droplets is not affected by the polymer addition but it induces attractive interactions at low concentration and repulsive ones at high polymer content. Measurements of the diffusion coefficient by dynamic light scattering (DLS) show different relaxations in mixed systems. The fast diffusion coefficient increases with increase in polymer concentration. At higher polymer content, the network formation leads to an additional slow relaxation mode in DLS that can be related to the formation of clusters of microemulsion droplets interconnected by the polymer. The collective diffusion of slow relaxations decreases with increase of polymer concentrations.     

Formulation and physicochemical characterization of microemulsion system using isopropyl myristate, medium-chain glyceride, polysorbate 80 and water

The phase behavior of the system isopropyl myristate/medium-chain glyceride/polysorbate 80/water forming both w/o and o/w microemulsions has been studied to develop microemulsion comprising of pharmaceutical excipients. The pseudo-ternary phase diagrams with large monophasic zones and gel formation were realized and several compositions were identified in the phase diagram for rheological, dynamic light scattering (DLS) and calorimetric measurements. The identified systems at different temperatures behaved as Newtonian fluid and the activation parameters for their viscous flow were evaluated. From DLS measurements, hydrodynamic diameter, polydispersity and diffusion coefficient of the microheterogeneous dispersions were determined. The free energy, enthalpy and entropy of solution of the w/o and o/w microemulsions were determined from calorimetric measurements.     

Nanoparticle-reinforced associative network hydrogels

ABA triblock copolymers in solvents selective for the midblock are known to form associative micellar gels. We have modified the structure and rheology of ABA triblock copolymer gels comprising poly(lactide)-poly(ethylene oxide)-poly(lactide) (PLA-PEO-PLA) through addition of a clay nanoparticle, laponite. Addition of laponite particles resulted in additional junction points in the gel via adsorption of the PEO corona chains onto the clay surfaces. Rheological measurements showed that this strategy led to a significant enhancement of the gel elastic modulus with small amounts of nanoparticles. Further characterization using small-angle X-ray scattering and dynamic light scattering confirmed that nanoparticles increase the intermicellar attraction and result in aggregation of PLA-PEO-PLA micelles.     

Formation and characterization of self-assembling fish oil microemulsions

The novel fish oil O/W microemulsion system is formed with food-acceptable components, Tween 80, ethyl oleate, fish oil and water. We studied the influence of fish oil proportion in the oil phase on the microemulsion regions. We investigated this system using the dynamic light scattering and transmission electron microscopy; the rheological characteristics and release effect were also explored. The obtained results indicated that the particle sizes of spherical droplets in microemulsions depend significantly on the total oil phase content, varying from 5 to 198 nm. The rheological measurements showed that all studied microemulsions followed shear thinning behavior. Well-controlled release profile of the fish oil microemulsions was found in different dialyzate solutions.     

Polymerization of w/o microemulsions for the preparation of transparent SiO2/PMMA nanocomposites

Reverse w/o microemulsions composed of methyl methacrylate (MMA) forming the oil phase, nonionic surfactants, and water are used for the synthesis of transparent SiO2/PMMA nanocomposites. An inorganic precursor, tetraethoxysilane (Si(OEt)(4), TEOS), is hydrolyzed in the reverse micelles containing aqueous ammonia. During the hydrolysis of TEOS, polymerization of the continuous MMA phase is initiated using AIBN (azobisisobutyronitrile), and after thermal polymerization at 333 K for 12 h, solid blocks of PMMA are obtained in which nanometer-sized silica particles are trapped in the solid polymer matrix. According to small-angle X-ray and dynamic light scattering experiments, the water droplets in MMA microemulsions are 12 nm (R(W) = 13) in diameter, whereas after polymerization of the microemulsion, the SiO2 particles in the transparent SiO2/PMMA composites are 26 nm in diameter. Transmission electron micrographs demonstrate a low degree of agglomeration in the composites. In comparison with materials generated from micelle-free solutions, the particle size distribution is narrow. The reverse micelle-mediated approach produces composites of high transparency comparable with that of pure PMMA.     

Formation of organically and inorganically passivated CdS nanoparticles in reverse microemulsions

This paper is focused on the formation of organically and inorganically passivated cadmium sulfide (CdS) nanoparticles in two different types of microemulsions. On the one hand, we used a ternary inverse microemulsion consisting of water, heptanol, and 3-(N,N-dimethyldodecylammonio)propanesulfonate and on the other hand, a poly(ethyleneimine)-based quaternary microemulsion containing water, toluene, pentanol, and sodium dodecylsulfate. UV-vis measurements confirm the formation of CdS-ZnS core-shell nanoparticles in the ternary microemulsion. Using the quaternary microemulsion template phase, polymer capped luminescent CdS nanoparticles can be formed. After a complete solvent evaporation, the nanoparticles are redispersed in water and characterized by means of dynamic light scattering and transmission electron microscopy. From the ternary microemulsion, well-stabilized CdS-ZnS core-shell nanoparticles with diameters of about 5 nm can be redispersed, but from the quaternary microemulsion, only nanoparticle aggregates of about 100 nm.     

Polyelectrolyte-modified microemulsions as new templates for the formation of nanoparticles

The paper is focused on the formation and redispersion of monodisperse BaSO₄ nanoparticles in polyelectrolyte-modified microemulsions. It is shown that a cationic polyelectrolyte of low molar mass, e.g. poly(diallyldimethylammonium chloride) (PDADMAC), can be incorporated into the individual inverse microemulsion droplets (L2 phase) consisting of heptanol, water, and an amphoteric surfactant with a sulfobetaine head group. These PDADMAC-filled microemulsion droplets can be successfully used as a template phase for the nanoparticle formation. The monodisperse BaSO₄ nanoparticles are produced by a simple mixing procedure and can be redispersed after solvent evaporation without a change in particle dimensions. Dynamic and electrophoretical light scattering in combination with sedimentation experiments in the analytical ultracentrifuge of the redispersed powder show polyelectrolyte-stabilized nanoparticles with diameters of about 6 nm. The polyelectrolyte shows a “size control effect”, which can be explained by the polyelectrolyte–surfactant interactions in relation to the polyelectrolyte–nanoparticle interactions during the particle growth, solvent evaporation and redispersion process. However, the approach used here opens a way to produce different types of polyelectrolyte-stabilized nanoparticles (including rare metals, semiconductors, carbonates or oxides) of very small dimensions.     

Self-aggregation of poly(butadiene)-b-poly(2-vinylpyridine)-b-poly(ethylene oxide) triblock copolymers in heptane studied by viscometry and dynamic light scattering

Poly(butadiene)-b-poly(2-vinylpyridine)-b-poly(ethylene oxide) (PBP2VPPEO) triblock copolymers of various compositions and molecular weights were prepared by sequential anionic polymerization. Their micellization behavior was examined in heptane, which is a selective solvent for PB whereas P2VP and PEO are insoluble. Dynamic light scattering and viscometry were used to determine the basic micellar characteristics, such as aggregation number, micellar sizes, and polydispersity, which were correlated to the molecular characteristics of the copolymers. Such ABC triblock copolymers form structured micelle-like nanoparticles having a core–shell morphology with hydrodynamic diameters in the range of 45–75 nm.     

Polyampholyte-surfactant film tuning in reverse microemulsions

The pH-dependent influence of two different strongly alternating copolymers [poly(N,N'-diallyl-N,N'-dimethylammonium-alt-N-phenylmaleamic carboxylate) (PalPh) and poly(N,N'-diallyl-N,N'-dimethylammonium-alt-3,5-bis(carboxyphenyl)maleamic carboxylate) (PalPhBisCarb)] based on N,N'-diallyl-N,N'-dimethylammonium chloride and maleamic acid derivatives on the phase behavior of a water-in-oil (w/o) microemulsion system made from toluene-pentanol (1:1) and sodium dodecyl sulfate was investigated. It was shown that the optically clear phase range can be extended after incorporation of these copolymers, leading to an increased water solubilization capacity. Additionally, the required amount of surfactant to establish a clear w/o microemulsion depends on the pH value, which means the hydrophobicity of the copolymers. Conductivity measurements show that droplet-droplet interactions in the w/o microemulsion are decreased at acidic but increased at alkaline pH in the presence of the copolymers. From differential scanning calorimetry measurements one can further conclude that these results are in agreement with a change of the position of the copolymer in the interfacial region of the surfactant film. The more hydrophobic PalPh can be directly incorporated into the surfactant film, whereas the phenyl groups of PalPhBisCarb flip into the water core by increasing the pH value.     

Length scale of polyisopirene and dynamic light scattering and structure of sodium-2-diethylhexyl sulfosuccinate/water/decane

The mixture of polyisopirene (PI) and sodium-2-diethylhexyl sulfosuccinate /decane/water microemulsion (ME) at AOT to water molar ratio (X = 30) and droplet mass fraction (m_f,drop = 0.08) was studied with dynamic light scattering and small-angle X-ray scattering (SAXS). The light scattering was used to obtain the diffusion coefficient of Brownian motion of the nano-droplets at different polymer concentrations and molecular weights (1000 and 4700) in the ME. The dynamics of the nano-droplets decreased with the increase of molecular weight (from 1000 to 4700) and concentration (from 0.01 to 0.09) of PI. The study of the structure by SAXS showed that with increase of PI (MW = 1000) mass fraction from 0.01 to 0.09 at ME, the size of the droplets changes from 4.5 to 4.3 nm and with increase of PI (MW = 4700) concentration at ME, the size of droplets changes from 4.8 to 4.4 nm. The size ratio of droplets to polymer decreased with increase of concentration and molecular weight of polymer and also the interaction between the droplets increased with increase of polymer concentration.     

Effect of alpha-lactalbumin on aerosol-OT phase structures in oil/water mixtures

The ability of water-soluble, globular proteins to tune surfactant/oil/water self-assemblies has potential for the formation of biocompatible microemulsions and also plays a role in protein function at biological interfaces. In this work, we examined the effect of the protein alpha-lactalbumin on Aerosol-OT (AOT) phase structures in equivolume mixtures of oil and 0.1 M brine. In this pseudo-ternary system, surfactants are free to move to either oil or water phase to adopt phase structures close to the spontaneous curvature of the surfactants. Using small-angle X-ray scattering, we observed that addition of this protein changed the spontaneous curvature of the surfactant monolayer substantially. In the absence of protein, AOT adopted a negative spontaneous curvature to form spherical w/o microemulsion droplets. When less than 1 wt % of alpha-lactalbumin was added into the system, the w/o droplets became nonspherical and larger in volume, corresponding to an increase in water uptake into the droplets. As the protein-to-surfactant ratio increased, protein, surfactant, and oil increasingly partitioned toward the aqueous phase. There the protein triggered the formation of o/w microemulsions with a positive spontaneous curvature. These protein-containing structures exhibited significant interparticle attraction. We also compared the influence of two oil types, isooctane and cyclohexane, on the protein/surfactant interactions. We propose that the more negative natural curvature of the AOT/cyclohexane monolayer in the absence of protein prevented protein incorporation within organic phase structures and consequently pushed the system self-assembly toward aqueous aggregate formation.     

Formulation of Conjugated Linoleic Acid Microemulsion Using Mixed Nonionic Surfactants

A novel class of conjugated linoleic acid (CLA)-in-water microemulsion based on Tween80, EL-35, ethanol, and n-octanol was investigated as potential food delivery systems. The influences of pH on the microemulsion region were considered. The microemulsion structural transition was divided into water-in-oil (W/O), bicontionuous, and oil-in-water (O/W) microemulsion by conductivity and viscosity method. The microemulsion size and polydispersity were determined by dynamic light scattering (DLS). The size of O/W microemulsion droplets depends strongly on the contents of surfactants and CLA, and the diameter ranges from 22.1 to 30.7 nm and from 18.3 to 32.8 nm, respectively. All samples keep a remarkable stability in the experiments of 30 days. The stability of CLA in microemulsion and ethanol solution was determined by ultraviolet-visible spectrophotometry, the results revealed that the stability of the CLA in the microemulsion was increased remarkably.     

Laser photophoretic migration with periodic expansion-contraction motion of photo-absorbing microemulsion droplets in water

When the water-in-oil (w/o) microemulsion droplets including the Co(III)-pyridylazo complex as the photo-absorber were irradiated with a continuous-wave Ar(+) ion laser (514.5 nm), we have observed unexpected phenomenon that photo-absorbing microemulsion droplets in water repeated the expansion and the sudden contraction during the laser photophoretic migration. The period of the expansion-contraction cycle was inversely proportional to both the concentration of the complex and the irradiated laser power and was independent of the initial size of the droplet. The mechanism of the periodic motion of the droplet was investigated by local temperature measurement and Raman microscope spectroscopy. It was suggested that the first step was the phase separation of the bicontinuous microemulsion droplet into the normal w/o microemulsion outer phase and the aqueous inner phase in the droplet, which was caused by the laser-induced temperature gradient inside the droplet. Subsequently, an expansion of the inner aqueous phase was induced by the percolation of the external water by thermo-osmosis, which was caused by the laser-induced temperature gradient between the inside and the outside of the microemulsion liquid membrane of the droplet. When the liquid membrane became thinner to a critical thickness, the inner aqueous phase was released and the droplet shrank into the original size. The proposed mechanism can give an account of the unique cyclical motion.     

Unique layered double hydroxide morphologies using reverse microemulsion synthesis

We report the first controlled synthesis of a layered double hydroxide (LDH) in a water-in-oil reverse microemulsion system. This synthesis of Mg2Al-LDHs was carried out in the reverse microemulsion of NaDDS (sodium dodecyl sulfate)-water-isooctane with water/surfactant molar ratio = 24. This enables us to obtain nanometer sized LDH platelets typically with a 40-50 nm diameter and 10 nm thickness. Further modification of the reverse microemulsion using triblock copolymers during crystallization allowed us to express different growth orientations of the LDH structure. These data show that the aspect ratio of LDHs can be flexibly adjusted over a wide range.     

Effect of added alpha-lactalbumin protein on the phase behavior of AOT-brine-isooctane systems

We have found that the presence of <1 wt% of the globular protein alpha-lactalbumin has a significant impact on the equilibrium phase behavior of dilute sodium bis(ethylhexyl) sulfosuccinate (AOT)/brine/isooctane systems. Nuclear magnetic resonance (NMR), Karl Fischer titration, and ultraviolet spectroscopy were used to determine the surfactant, oil, water, and protein content of the organic and aqueous phases as a function of the total surfactant and protein present. As a small amount of alpha-lactalbumin is added to the mixture, there is a substantial increase (up to 80%) in the maximum water solubility in the water-in-oil microemulsion phase. Dynamic light scattering measurements indicate that this increase is due to a decrease in the magnitude of the (negative) spontaneous curvature of the surfactant monolayer, as droplets swell in size. As the molar ratio of alpha-lactalbumin to AOT surpasses approximately 1:300, the partitioning of water, protein, and surfactant shifts to the excess aqueous phase, where soluble assemblies with positive curvature are detected by dynamic light scattering. Significant amounts of isooctane are solubilized in these aggregates, consistent with the formation of oil-in-water microemulsion droplets. Circular dichroism studies showed that the tertiary structure of the protein in the microemulsion is disrupted while the secondary structure is increased. In light of these findings, the protein most likely expands to a molten-globule type conformation in the AOT interfacial environment, but does not substantially unfold to become an extended chain.     

Structure of w/o-microemulsion templated polymer networks

 The droplet phase of a water-in-oil microemulsion is used as a matrix to create amphiphilic polymer network structures from a poly(oxyethylene)-poly(isoprene)-poly(oxyethylene) triblock copolymer bearing polymerizable methacrylate end groups. Conductivity measurements and freeze fracture electron microscopy are used to obtain information about the structure of these gels. The droplet structure of the underlying microemulsion is only preserved for low droplet and polymer concentration. For higher concentrations the crosslinking reaction can induce the formation of a bicontinuous structure. Received: 6 January 1997 Accepted: 12 February 1997     

Aggregation behavior of pluronic triblock copolymer in 1-butyl-3-methylimidazolium type ionic liquids

Three amphiphilic poly(oxyethylene)-poly(oxypropylene)-poly(oxyethylene) ethers triblock copolymers, denoted Pluronic L61 (PEO3PPO30PEO3), Pluronic L64 (PEO13PPO30PEO13), and Pluronic F68 (PEO79PPO30PEO79) were shown to aggregate and form micelles in ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) and 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6). The surface tension measurements revealed that the dissolution of the copolymers in ILs depressed the surface tension in a manner analogous to aqueous solutions. The cmcs of three triblock copolymers increase following the order of L61, L64, F68, suggesting that micellar formation was driven by solvatophobic effect. cmc and gamma cmc decrease with increasing temperature because hydrogen bonds between ILs and hydrophilic group of copolymers decrease and accordingly enhance the solvatophobic interaction. Micellar droplets of irregular shape with average size of 50 nm were observed. The thermodynamic parameters DeltaGm0, DeltaHm0, DeltaSm0 of the micellization of block copolymers in bmimBF4 and bmimPF6 were also calculated. It was revealed that the micellization is a process of entropy driving, which was further confirmed by isothermal titration calorimetry (ITC) measurements.     

双亲性三嵌段共聚物/水体系超分子结构的研究

利用小角 X-射线散射技术研完了双亲性聚氧化乙烯-聚二甲基硅氧烷-聚氧化乙烯三嵌段共聚物/水体系在高浓度的溶致性液晶相,测定了亲水区、疏水区随浓度和结构变化的尺寸等超分子结构参数。用简单的几何模型可满意地解释实验结果。