基于自制聚苯胺顶空固相微萃取涂层快速监测水体和牛奶中的痕量多溴联苯醚

采用电化学沉淀法,成功地制备了多孔、高效聚苯胺固相微萃取涂层,并建立了顶空固相微萃取-气相色谱(HS-SPME-GC)快速测定水体和牛奶中的痕量多溴联苯醚的方法。详细研究了萃取模式、萃取温度、萃取时间、顶空体积及离子强度对萃取效率的影响。在优化实验条件下,本法测定的6种多溴联苯醚的线性范围为1~4000 ng/L(除BDE-154和BDE-153分别为1~3000 ng/L、1~2500 ng/L外),相关系数大于0.99,检出限(S/N=3)在0.08~0.20 ng/L之间,相对偏差小于8.5%(n=7)。自制聚苯胺涂层对多溴联苯醚的萃取效率优于商品化100μm-PDMS纤维。将本法用于河水和牛奶中痕量多溴联苯醚的测定,实际样品回收率分别在90%和80%以上。     

凝胶渗透色谱-分散固相萃取法同时测定鸡蛋中多溴联苯醚及其衍生物、四溴双酚A和六溴环十二烷

建立了一种同时检测鸡蛋中四溴双酚A(TBBP A)、六溴环十二烷(HBCD)和多溴联苯醚(PBDEs)及其衍生物羟基多溴联苯醚(OH-PBDEs)和甲氧基多溴联苯醚(MeO-PBDEs)的凝胶渗透色谱(GPC)-分散固相萃取(DSPE)-液相色谱-串联质谱(HPLC-MS/MS)和气相色谱-负化学源质谱(GC-NCI/MS)的检测方法。样品经正己烷、二氯甲烷(1∶1,V/V)加速溶剂萃取,凝胶渗透色谱净化后,经100 mg十八烷基键合硅胶(C18)分散固相萃取吸附剂去除杂质,液相色谱-串联质谱和气相色谱-负化学源质谱方法测定,外标法定量。在蛋白和蛋黄样品中添加1.0或5.0μg/kg的目标物,其回收率分别为64.5%~97.2%和65.6%~109.2%(除BDE-85为54.8%,OH-BDE-137为47.4%外),相对标准偏差小于20.2%,定量限为0.01~0.2μg/kg。     

超声辅助-分散液相微萃取/高效液相色谱法测定沉积物中双酚A及其衍生物

建立了超声辅助-分散液相微萃取/高效液相色谱测定沉积物中双酚A,四溴双酚A,四溴双酚A双烯丙基醚,四溴双酚A双(2,3-二溴丙基)醚的方法。对萃取剂与分散剂的种类与用量、超声时间、盐效应及p H等萃取条件进行了优化。在优化的条件下,此方法的线性范围为0.1~100 mg/L,线性相关系数(r)为0.9996~0.9999。样品平均回收率为83%~91%,相对标准偏差为1.8%~4.9%。检出限(S/N=3)为0.01~0.15μg/L。方法可用于实际水库沉积物中双酚A及其衍生物的测定。     

气相色谱-质谱-选择离子监测法测定漱口水中挥发性成分的含量

建立了Listerine漱口水中挥发性成分的GC-MS/SIM定量检测方法。采用HP-5MS 5 Phenyl-Methyl Siloxane(30 m×0.25 mm×0.25 m)弹性石英毛细管柱,80℃~250℃程序升温,以联苯作为内标物,采用GC-MS的全扫描方式(Full Scan)和选择离子检测方式(SIM)对漱口水中桉叶油素、薄荷醇、水杨酸甲酯和麝香草酚进行定性和定量分析。桉叶油素、薄荷醇、水杨酸甲酯和麝香草酚线性范围分别为1.15~276μg/m L(r=0.9979),1.23~299.16μg/m L(r=0.9997),1.47~354μg/m L(r=0.9998),1.24~299.4μg/m L(r=0.9989);检出限(LOD)分别为12.4,12.4,11.5,14.8 ng/m L;平均回收率为92%~109%,RSD为4.1%~5.0%。     

微波辅助萃取-气相色谱测定纺织品中多溴联苯(醚)类阻燃剂

建立了微波辅助萃取-气相色谱-微电子捕获检测纺织品中8种多溴联苯及多溴联苯醚类阻燃剂的方法.通过萃取剂选择实验和正交实验,确定了以25 mL正己烷: 二氯甲烷混合溶剂(2:3, V/V)为萃取剂,萃取温度60℃, 仪器功率400 W,萃取10 min的微波萃取条件,并用流速梯度和柱温程序结合的方法优化了气相色谱分析条件.方法的检出限为0.12～0.99 μg/kg;标准加入回收率为75.5%～112.9%;精密度1.3%～11.8%(n=6),适用于纺织品中痕量多溴联苯(醚)类阻燃剂的监测分析.     

QuEChERS结合气相色谱-质谱法快速测定职业工人尿液中多溴联苯醚

建立了QuEChERS前处理结合气相色谱-质谱快速测定职业工人尿液中8种多溴联苯醚同系物的分析方法。尿液样在氯化钠和无水硫酸镁的脱水与盐析作用下以正己烷-丙酮混合液提取,采用C18去除提取液中的杂质,并采用气相色谱-负化学源质谱法在选择离子监测模式下测定,内标法定量。三至七溴联苯醚在1~100 pg/μL(十溴联苯醚为10~1 000 pg/μL)范围内线性关系良好,相关系数均大于0.999。待测物在3个加标水平下的平均回收率为91.7%~110.2%,相对标准偏差(RSD)小于10%。多溴联苯醚的检出限为0.3~36 pg/m L。该方法简单快速,灵敏度和选择性较高,适合职业工人体内污染物暴露水平监测。     

反相高效液相色谱检测法测定溴化1-乙基-3-甲基咪唑-水体系中青蒿素

建立了反相高效液相色谱(RP-HPLC)定量检测离子液体溴化1-乙基-3-甲基咪唑-水体系中青蒿素含量的方法.检测条件为:室温(25±1)℃,C18反向柱(250 mm×4.6 mm, 5 μm),以V(甲醇): V(0.01 mol/L HAc-NaAc溶液,pH=5.9)=60: 40混合溶液为流动相,流速0.5 mL/min,检测波长为260 nm.青蒿素浓度在5～30 mg/L之间线性回归方程为y=2.20326×107x-30928.7,相关系数r=0.9990.本方法回收率为100 2%;相对标准偏差(RSD)为0.42%.     

高效液相色谱法测定皮革中20种溴代阻燃剂

建立了皮革中20种多溴联苯和多溴联苯醚阻燃剂的高效液相色谱测定方法。采用V(二氯甲烷):V(正己烷)=3:2混合溶剂作为提取溶剂,常温超声萃取30 min,经硅胶固相萃取柱净化,蒸发浓缩至近干后用甲苯定容。用甲醇-缓冲溶液(pH 7)为流动相梯度洗脱,C18反相萃取柱分离目标物质,于226 nm检测。通过优化色谱梯度洗脱条件,有效排除了溶剂峰对低取代物的干扰。结果表明,目标物质质量浓度在5.0~25.0 mg/L范围内线性关系良好,相关系数大于0.996,定量限(S/N=10)为5.20~41.7 mg/kg,选定物质六溴联苯和十溴联苯醚的加标回收率为91.3%~102.9%。该法对所采用的20种目标物质中的16种都具有良好的分离效果,且对高溴代物的响应较好,可弥补气相色谱法对高溴代物灵敏度低的问题。方法可用于皮革中多溴联苯和多溴联苯醚的检测。     

以ZIF-8为固相微萃取涂层分析环境水样中痕量多溴联苯醚

将沸石咪唑酯骨架材料(ZIF-8)制成固相微萃取涂层,结合气相色谱-三重四极杆串联质谱联用仪(GC-MS/MS),建立了一种快速灵敏分析环境水样中6种痕量多溴联苯醚的方法。采用单因素优化实验得到的最优条件为:不添加Na Cl,萃取温度为50℃,萃取时间为50 min,p H值为7.0,解吸时间和解吸温度分别为5 min和280℃。在最优条件下,该方法测定水样中多溴联苯醚的线性范围为1~1 000 ng/L,检出限为0.08~2.29 ng/L,定量下限为0.23~7.32 ng/L。日内和日间相对标准偏差分别为4.3%~6.5%和6.9%~9.3%。将该方法应用于4种实际环境水样(自来水、泉水、池塘水和垃圾填埋场废水)中多溴联苯醚的检测,回收率为81.6%~109%。     

气相色谱-质谱法测定玩具中的4种阻燃剂

建立了玩具中三(2-氯乙基)磷酸酯、磷酸三邻甲苯酯、2,2′,4,4′,5-五溴联苯醚、2,2′,3,3′,4,4′,6,6′-八溴联苯醚等4种阻燃剂的气相色谱-质谱分析方法。玩具样品以V(正己烷):V(二氯甲烷)=1:1混合溶液为提取溶剂,超声提取30min,提取液以DB-5HT石英毛细管色谱柱(15m×0.25mm×0.10μm)分离后进行选择离子监测模式下的定性及定量分析。4种阻燃剂的定量限为0.1mg/kg,在低、中、高3个添加水平范围内,4种阻燃剂的平均回收率为93.5%～97.3%,相对标准偏差在2.4%～4.1%之间。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.