A cyclic hexacopper(II) fluoro complex that encapsulates two fluoride anions

The complex [[Cu3(HpztBu)4(mu-pztBu)2(mu-F)2(mu 3-F)]2]F2 (HpztBu = 3[5]-tert-butylpyrazole) has a cyclic, C2v-symmetric hexacopper core. The two non-coordinated F- anions are encapsulated within cavities formed by three HpztBu ligands.     

Cloud point extraction equilibrium of lanthanum(III), europium(III) and lutetium(III) using di(2-ethylhexyl)phosphoric acid and Triton X-100

The cloud point extraction behaviors of lanthanoids(III) (Ln(III) = La(III), Eu(III) and Lu(III)) with and without di(2-ethylhexyl)phosphoric acid (HDEHP) using Triton X-100 were investigated. It was suggested that the extraction of Ln(III) into the surfactant-rich phase without added chelating agent was caused by the impurities contained in Triton X-100. The extraction percentage more than 91% for all Ln(III) metals was obtained using 3.0 × 10⁻⁵ mol dm⁻³ HDEHP and 2.0% (v/v) Triton X-100. From the equilibrium analysis, it was clarified that Ln(III) was extracted as Ln(DEHP)₃ into the surfactant-rich phase. The extraction constant of Ln(III) with HDEHP and 2.0% (v/v) Triton X-100 were also obtained.     

Electrochemiluminescence of tris(2,2'-bipyridine)ruthenium(II) immobilized in poly(p-styrenesulfonate)-silica-Triton X-100 composite thin-films

The electrochemiluminescence (ECL) of tris(2,2'-bipyridine)ruthenium(II) [Ru(bpy)3(2+)] immobilized in poly(p-styrenesulfonate) (PSS)-silica-Triton X-100 composite films was investigated. The cooperative action of PSS, sol-gel and Triton X-100 attached Ru(bpy)3(2+) to the electrode strongly, and the presence of Triton X-100 prevented drying fractures of the sol-gel films during gelation and even on repeated wet-dry cycles. The modified electrode was used for the ECL detection of oxalate, tripropylamine (TPA) and NADH in a flow injection analysis (FIA) system with a newly designed flow cell. The detection scheme exhibited good stability, short response time and high sensitivity. Detection limits were 0.1, 0.1 and 0.5 micromol L(-1) for oxalate. TPA and NADH, respectively, and the linear concentration range extended from 0.001 to 1 mmol L(-1) for the three analytes. Applications of the flow cell in ECL and electrochemical detection, as well as the immobilization of reagents based on the cooperative action, are suggested.     

Micellization of economically viable surfactants in CO(2)

Stability and aggregation structures of various economically viable surfactants for CO(2) are reported. The compounds are either commercially available octylphenol nonionics (Triton X-100, X-100 reduced, and X-45) or custom-made analogues of aerosol-OT (J. Am. Chem. Soc. 123 (2001) 988). These were selected to reveal the influence of chain terminal group structure, namely highly methylated t-butyl units, on solubility and aggregation in CO(2). In addition the mean ethylene oxide block length is varied for the Triton surfactants (X-100 approximately EO(10), X-45 approximately EO(8)). High-pressure small-angle neutron scattering (SANS) experiments revealed the presence of aggregates, consistent with spheroidal reverse micelles. The nonionics show a temperature and pressure dependence on solubility. These results confirm the special affinity of highly methyl-branched tails for CO(2). However, none of these systems were able to disperse significant amounts of water or brine; therefore hydrated reversed micelles or microemulsion droplets were not stabilized. Hence the utility of these cheap methyl-branched surfactants in CO(2) is limited, and so groups of greater CO(2)-philicity are needed to achieve the goal of water-hydrocarbon surfactant-CO(2) dispersions.     

Cloud point extraction of iron(III) and vanadium(V) using 8-quinolinol derivatives and Triton X-100 and determination of 10(-7)moldm(-3) level iron(III) in riverine water reference by a graphite furnace atomic absorption spectroscopy

The cloud point extraction behavior of iron(III) and vanadium(V) using 8-quinolinol derivatives (HA) such as 8-quinolinol (HQ), 2-methyl-8-quinolinol (HMQ), 5-butyloxymethyl-8-quinolinol (HO₄Q), 5-hexyloxymethyl-8-quinolinol (HO₆Q), and 2-methyl-5-octyloxymethyl-8-quinolinol (HMO₈Q) and Triton X-100 solution was investigated. Iron(III) was extracted with HA and 4% (v/v) Triton X-100 in the pH range of 1.70-5.44. Above pH 4.0, more than 95% of iron(III) was extracted with HQ, HMQ, and HMO₈Q. Vanadium(V) was also extracted with HA and 4% (v/v) Triton X-100 in the pH range of 2.07-5.00, and the extractability increased in the following order of HMQ < HQ < HO₄Q < HO₆Q. The cloud point extraction was applied to the determination of iron(III) in the riverine water reference by a graphite furnace atomic absorption spectroscopy. When 1.25 × 10⁻³ M HMQ and 1% (v/v) Triton X-100 were used, the found values showed a good agreement with the certified ones within the 2% of the R.S.D. Moreover, the effect of an alkyl group on the solubility of 5-alkyloxymethyl-8-quinolinol and 2-methyl-5-alkyloxymethyl-8-quinolinol in 4% (v/v) Triton X-100 at 25 °C was also investigated.     

The Micellization and Clouding of Nonionic Surfactant,Poly(Ethylene Glycol) t-Octylphenyl Ether (Triton X-100): Effect of Halide Ions of (Sodium Salt) Electrolytes

In this investigation, the micellization and the clouding phenomena of a nonionic surfactant, poly(ethylene glycol) t-octylphenyl ether (Triton X-100) in the absence and presence of halide ions (sodium salt) electrolytes has been reported. The critical micelle concentration (CMC) of Triton X-100 (in the absence and presence of electrolytes) was measured by surface tension measurements. A decreasing trend of CMC was found with increasing the temperature as well as the concentration of electrolyte. The effectiveness of the halide ions was found in the order: F^? > Cl^? > Br^? > I^?. The surface properties of Triton X-100 were evaluated. The thermodynamic parameters of the micellar systems of Triton X-100 were evaluated and from these thermodynamics data, it was found that in the presence of electrolyte the stability of the micellar system is more. The cloud points (CPs) of Triton X-100 were also measured in the absence and presence of halide ions of electrolytes. With the addition of halide ions of sodium salt (electrolyte), a decrease in CP values was observed and the order was found to be: F^? > Cl^? > Br^? > I^?.     

CAl4X (X=Si,Ge): molecules with simultaneous planar tetracoordinate carbon, aluminum, and silicon/germanium

The authors report the first theoretical study on the hexa-atomic molecules CAl(4)X (X=Si,Ge) at the B3LYP/6-311++G(2d), MP2/6-311++G(2d), and CCSD(T)/6-311++G(3df) (single point) levels. Three low-lying isomers (within 2.0 kcal/mol) can be formally viewed as constructed by one Al+ interacting with the planar CAl3X- at the side Al-X bond (X-1), side Al-Al bond (X-2), and central C atom (X-3). The isomers X-1 and X-2 both have planar structures that include the planar tetracoordinate carbon, aluminum, and silicon/germanium, while the three-dimensional isomer X-3 has the pentacoordinate carbon. The planarity of X-1 and X-2 is ascribed to the ligand five-center two-electron bonding molecular orbital, similar to the orbital responsible for the planarity of CAl3X- (X=Si,Ge). Kinetically, the two planar structures X-1 and X-2 can be easily interconverted to each other via the intermediate X-3, indicative of their coexistence. Of particular interest, isomer X-1 represents the first example that simultaneously contains three types of planar centers in a single molecule, to the best of our knowledge. The three low-lying and structurally interesting isomers X-1, X-2, and X-3 await future experimental verification. The present results could enrich the planar chemistry.     

Synergistic cloud point extraction behavior of aluminum(III) with 2-methyl-8-quinolinol and 3,5-dichlorophenol.

The cloud point extraction behavior of aluminum(III) with 8-quinolinol (HQ) or 2-methyl-8-quinolinol (HMQ) and Triton X-100 was investigated in the absence and presence of 3,5-dichlorophenol (Hdcp). Aluminum(III) was almost extracted with HQ and 4(v/v)% Triton X-100 above pH 5.0, but was not extracted with HMQ-Triton X-100. However, in the presence of Hdcp, it was almost quantitatively extracted with HMQ-Triton X-100. The synergistic effect of Hdcp on the extraction of aluminum(III) with HMQ and Triton X-100 may be caused by the formation of a mixed-ligand complex, Al(dcp)(MQ)2.     

Electrochemistry of [(TMpyP)M(II)]4+ (X-)4 (X- = Cl- or BPh4-) and [(TMpyP)M(III)Cl]4+ (Cl-)4 in N,N-dimethylformamide where M is one of 15 different metal ions

The electrochemistry of 16 different water-soluble porphyrins of the type [(TMpyP)M(II)]4+ (X-)4 or [(TMpyP)M(III)Cl]4+ (Cl-)4 is reported in nonaqueous media where TMpyP is the dianion of meso-tetrakis(N-methylpyridiniumyl)porphyrin and X- = Cl- or BPh4-. These studies were carried out to examine the effect of the metal ion and porphyrin counterion (X-) on the electrochemical properties of the TMpyP complexes with a special emphasis being given to the overall number of electrons added and the number of electrode processes upon reduction. All of the investigated compounds with electroinactive central metal ions undergo an overall addition of six electrons. This occurs for most compounds via three two-electron-transfer steps, but more than three processes are observed for porphyrins having metal ions with a low electronegativity (e.g., Cd(II)). The first reduction of each porphyrin having an M(II) ion or an electroinactive M(III) ion yields a porphyrin dianion which is characterized by an intense band located close to 800 nm, and this reversible reduction is followed by further reductions of the 1-methyl-4-pyridyl groups at more negative potentials. Four of the compounds with electroactive central metal ions, [(TMpyP)M(III)Cl]4+(Cl-)4 (M = Co, Fe, Mn, or Au), undergo an additional reversible M(III)/M(II) process prior to reactions involving the porphyrin pi-ring system and the 1-methyl-4-pyridyl substituents.     

The Micellization and Clouding Phenomena of a Nonionic Surfactant,Poly(ethylene glycol) t-octylphenyl ether (Triton X-100): Effect of (Chloride Salt) Electrolytes

Herein, we report the micellization and the clouding of a nonionic surfactant, poly(ethylene glycol) t-octylphenyl ether (Triton X-100), in aqueous solutions in the absence and presence of (chloride salt) electrolytes. In the absence and presence of electrolytes, the critical micelle concentration (CMC) of Triton X-100 was measured by surface tension measurements. Upon increasing the temperature as well as the concentration of electrolytes, the CMCs decreased. The surface properties and the thermodynamic parameters of the micellar systems were evaluated. From these evaluated thermodynamic parameters, it was found that in the presence of an electrolyte, the stability of the micellar system is high. The cloud points (CPs) of Triton X-100 were also measured in the absence and presence of metallic ions of electrolytes. Upon the addition of metallic ions of chloride salts (electrolytes), the decrease in CP values was observed and the order was found to be: K⁺ > Na⁺ > Li⁺ > NH⁺₄.     

Dynamic axial ligand-site exchange in facially discriminated ruthenium(II) carbonyl and rhodium(III) halide metalloporphyrins

For a series of six-coordinate RuII(CO)L or RhIII(X-)L porphyrins, which are facially differentiated by having a naphthoquinol- or hydroquinol-containing strap across one face, we show that ligand migration from one face to the other can occur under mild conditions and that ligand-site preference is dependent on the nature of L and X-. For bulky nitrogen-based ligands, the strap can be displaced sideways to accommodate the ligand on the same side as the strap. For the ligand pyrazine, we show 1H NMR evidence for monodentate and bridging binding modes on both faces, dependent on ligand concentration and metalloporphyrin structure, and that interfacial migration is rapid under normal conditions. For monodentate substituted pyridine ligands, there is a site-dependence on structure, and we show clear evidence of dynamic ligand migration through a series of ligand-exchange reactions.     

Polarographic behaviour of 1,3-bis[(2-pyridyl)methyleneamino]thiourea (PMAT) in absence and presence of Triton X-100

The polarographic behaviour of 1,3-bis[(2-pyridyl)methyleneamino]thiourea (PMAT) in solutions of varyingpH has been studied both in the absence and presence of Triton X-100 (T.X-100). The mechanism for the reduction process is discussed. The adsorption effect of electrochemically inactive T.X-100 on the polarographic waves ofPMAT has been investigated. The values of the kinetic parameters for the electrode reaction at differentpH values have been computed. The applicability of the polarographic method for determination ofPMAT is also discussed.

---

Das polarographische Verhalten von 1,3-Bis[(2-pyridyl)methylenamino]-thioharnstoff (PMAT) in Anwesenheit und Abwesenheit von Triton X-100. Die polarographische Bestimmung vonPMAT

Zusammenfassung Es wurde das polarographische Verhalten vonPMAT in Lösungen mit verschiedenempH sowohl in Gegenwart als auch ohne Triton X-100 (T.X-100) untersucht. Es wird ein Mechanismus für den Reduktionsprozeß diskutiert. Der Adsorptionseffekt des elektrochemisch inaktiven T.X-100 wurde hinsichtlich der polarographischen Wellen vonPMAT untersucht. Die kinetischen Parameter der Elektrodenreaktion wurden für verschiedenepH-Werte ermittelt. Ebenso wird die Anwendbarkeit der polarographischen Methode für die Bestimmung vonPMAT diskutiert.

     

Supramolecular chemistry of halogens: complementary features of inorganic (M-X) and organic (C-X') halogens applied to M-X...X'-C halogen bond formation

Electronic differences between inorganic (M-X) and organic (C-X) halogens in conjunction with the anisotropic charge distribution associated with terminal halogens have been exploited in supramolecular synthesis based upon intermolecular M-X...X'-C halogen bonds. The synthesis and crystal structures of a family of compounds trans-[MCl(2)(NC(5)H(4)X-3)(2)] (M = Pd(II), Pt(II); X = F, Cl, Br, I; NC(5)H(4)X-3 = 3-halopyridine) are reported. With the exception of the fluoropyridine compounds, network structures propagated by M-Cl...X-C halogen bonds are adopted and involve all M-Cl and all C-X groups. M-Cl...X-C interactions show Cl...X separations shorter than van der Waals values, shorter distances being observed for heavier halogens (X). Geometries with near linear Cl...X-C angles (155-172 degrees ) and markedly bent M-Cl...X angles (92-137 degrees ) are consistently observed. DFT calculations on the model dimers {trans-[MCl(2)(NH(3))(NC(5)H(4)X-3)]}(2) show association through M-Cl...X-C (X not equal F) interactions with geometries similar to experimental values. DFT calculations of the electrostatic potential distributions for the compounds trans-[PdCl(2)(NC(5)H(4)X-3)(2)] (X = F, Cl, Br, I) demonstrate the effectiveness of the strategy to activate C-X groups toward halogen bond formation by enhancing their electrophilicity, and explain the absence of M-Cl...F-C interactions. The M-Cl...X-C halogen bonds described here can be viewed unambiguously as nucleophile-electrophile interactions that involve an attractive electrostatic contribution. This contrasts with some types of halogen-halogen interactions previously described and suggests that M-Cl...X-C halogen bonds could provide a valuable new synthon for supramolecular chemists.     

Kinetics of dissociation of tris-(2,2'-bipyridyl) iron(II) in water solubilized by Triton X-100 reverse micelles

The dissociation of tris-(2,2'-bipyridyl) iron(II) ([Fe(bipy)3]2+) has been studied in the Triton X-100/hexanol/cyclohexane reverse micellar medium. The reaction obeys simple first-order kinetics with no evidence of autoinhibition. The first-order rate constant (k1) has been determined at different values of W ([H2O]/[Triton X-100]). The rate (k1) decreases with increasing value of W. k1 also increases with increase in Triton X-100 concentration at constant values of W, showing that the reaction takes place at greater speed at the micellar interface. The kinetic results can be interpreted by the monomolecular pseudo-phase model. The effect of W on rate (k1) is more pronounced in the range of W from 1.55 to 4.2 but less pronounced at higher W. The reaction is further accelerated by Cl- and SCN- ions and the kinetic results provide evidence for the formation of ion pairs between the cation [Fe(bipy)3]2+ and each of these anions. The formation of such ion pairs has not been observed in aqueous medium but has been reported earlier in aqueous-alcohol mixtures. This result therefore provides evidence for the lower micropolarity of solubilized water compared to ordinary water.     

Formation of Copper(II) Thiocyanato and Cadmium(II) Iodo Complexes in Micelles of Nonionic Surfactants with Varying Poly(ethylene oxide) Chain Lengths

Formation of copper(II) thiocyanato and cadminum(II) iodo complexes in micelles of poly(ethylene oxide) (PEO)-type nonionic surfactants with varying PEO chain lengths of 9.5 (Triton X-100), 30 (Triton X-305), and 40 (Triton X-405) has been studied by titration spectrophotometry and calorimetry at 298 K. In a given surfactant solution, all data obtained were analyzed by assuming formation of ternary complexes MX(n)Y(m)((2-n)+) (M = Cu(II),Cd(II); X = SCN(-), I(-); Y = surfactant), and the complexes thus form in aqueous phase (m = 0) or in micelles (m = 1). In the Cu(II)-SCN(-) system, spectrophotometric data obtained by varying concentrations of the surfactant can be explained well in terms of formation of Cu(NCS)(2)Y in micelles and Cu(NCS)(+) and Cu(NCS)(2) in an aqueous phase, and it turned out that formation constant of Cu(NCS)(2)Y increases with increasing PEO chain length. In the Cd(II)-I(-) system, the formation of CdI(3)Y(-) and CdI(4)Y(2-) is concluded in micelles, and that of CdI(+), CdI(3)(-), and CdI(4)(2-) in an aqueous phase. Interestingly, formation enthalpies of CdI(3)Y(-) and CdI(4)Y(2-) become significantly less negative with increasing PEO chain length. This suggests that transfer of the complexes from aqueous solution to a hydrophobic octylphenyl (OP) moiety in micelles is significantly more exothermic than that to a hydrophilic PEO one. Thermodynamic parameters of transfer of CdI(3)(-) and CdI(4)(2-) from aqueous solution to the OP and PEO moieties of micelles have been evaluated. Copyright 2000 Academic Press.     

Bonding in tetrahedral Cu4(mu3-X)4L4 copper(I) clusters: a DFT investigation

DFT calculations on Cu(4)(mu3-X)4L4 (X = H, CH(3), CCH, F, Cl, Br, I; L = NH(3), PH(3)) indicate that, regardless of its nature, X- acts essentially as a two-electron sigma-type ligand and that the covalent part of the Cu...Cu bonding depends mainly upon the a1 component of the orbital interaction between the L4Cu4(4+) and X4(4-) fragments. The first excited state corresponds to the occupation of a Cu...Cu bonding LUMO of a1 symmetry, which is of dominant Cu(4s/4p) character when X- is an electronegative ligand, such as a halide. Consequently, this excited state is computed to exhibit Cu...Cu distances shorter than those in the ground state, in agreement with the luminescence properties of this type of compound.     

Collection of iron(III) from homogeneous aqueous solutions on membrane filters using Chromazurol B with Triton X-100.

A membrane filtration method was examined concerning the effective collection of iron(III) from a homogeneous aqueous solution with Chromazurol B (CAB), one of the triphenylmethane dyes, as a precipitating reagent in the presence of a non-ionic surfactant, polyethylene glycol mono[4-(1,1,3,3-tetramethylbutyl)phenyl]ether (Triton X-100). A formed blue Fe(III)-CAB complex was collected as a precipitate on a membrane filter by filtration under suction from a homogeneous aqueous solution in the pH range over about 2. The original solution was prepared at a concentration ratio of CAB to Fe(III) of to 10, and that of Triton X-100 to CAB of 10 to 100. It was then adjusted to a pH value of between 1.0 and 6.5. A linear relationship (r = 0.999) was obtained between the initial concentration and the found one of Fe(III) in the range of 2.0 x 10(-5) to 4.0 x 10(-4) mol dm(-3) at a fixed concentration ratio of CAB to Fe(III) of 3 and that of Triton X-100 to CAB of 20. This membrane filtration with CAB and Triton X-100 may be utilized for the separation of Fe(III) as a background species.     

Low-energy impact of X-(H2O)n (X = Cl,I) onto solid surface

We investigated dissociation of X-(H2O)n (X = Cl, I, n = 13-31) by the impact onto a (La0.7Ce0.3)B6(100) surface at a collision energy Ecol of 1-5 eV per water molecule in a tandem time-of-flight mass spectrometer equipped with a translation-energy analyzer. The mechanism of the dissociation was elucidated on the basis of the measurements of the mass spectrum and the translational energies of the product anions, X-(H2O)m (m = 0-4), scattered from the surface. It was concluded that (1) the parent cluster anion impacted on the surface undergoes dissociation on the surface under quasiequilibrium with its characteristic time varying with Ecol and n, and (2) the total collision energy introduced is partitioned preferentially to the translational motions of the products on the surface and to the rotational, the vibrational, and the lattice vibrational motions (surface) in this order. The quasiequilibrium model is applicable, even at the collision energy as low as 1 eV, because the translational modes are found to be statistically distributed while the other modes are not much populated by dynamical and energetics limitation.     

Cloud point extraction and graphite furnace atomic absorption spectrometry determination of manganese(II) and iron(III) in water samples

Cloud point extraction (CPE) was applied as a preconcentration step prior to graphite furnace atomic absorption spectrometry (GFAAS) determination of manganese(II) and iron(III) in water samples. After complexation with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP), the analytes could be quantitatively extracted to the phase rich in the surfactant p-octylpolyethyleneglycolphenylether (Triton X-100) and be concentrated, then determined by GFAAS. The parameters affecting the extraction efficiency, such as solution pH, concentration of PMBP and Triton X-100, equilibration temperature and time, were investigated in detail. Under the optimum conditions, preconcentration of 10 ml of sample solution permitted the detection of 0.02 ng ml(-1) of Mn(II) and 0.08 ng ml(-1) of Fe(III) with enrichment factors of 31 and 25 for Mn(II) and Fe(III), respectively. The proposed method was applied to determination of trace manganese(II) and iron(III) in water samples with satisfactory results.     

X- (X = O, S) ions in alkali halide lattices through density functional calculations. 1. Substitutional defect models

Monoatomic X- (X = O, S) chalcogen centers in MZ (M = Na, K, Rb and Z = Cl, Br, I) alkali halide lattices are investigated within the framework of density functional theory with the principal aim to establish defect models. In electron paramagnetic resonance (EPR) experiments, X- defects with tetragonal, orthorhombic, and monoclinic g-tensor symmetry have been observed. In this paper, models in which X- replaces a single halide ion, with a next nearest neighbor and a nearest neighbor halide vacancy, are validated for the X- centers with tetragonal and orthorhombic symmetry, respectively. As such defect models are extended, the ability to reproduce experimental data is a stringent test for various computational approaches. Cluster in vacuo and embedded cluster schemes are used to calculate energy and EPR parameters for the two vacancy configurations. The final assignment of a defect structure is based on the qualitative and quantitative reproduction of experimental g and (super)hyperfine tensors.