Alkyl and aryl substituted corroles. 2. Synthesis and characterization of linked "face-to-face" biscorroles. X-ray structure of (BCA)Co(2)(py)(3), where BCA represents a biscorrole with an anthracenyl bridge

The synthesis, spectroscopic properties, and electrochemistry of (BCA)Co(2) and (BCB)Co(2) are described where BCA and BCB represent biscorroles linked by an anthracenyl (A) or a biphenylenyl (B) bridge. The pyridine and CO binding properties of (BCA)Co(2) and (BCB)Co(2) are also presented, and one of the compounds in its pyridine-ligated form, (BCA)Co(2)(py)(3), is structurally characterized. The data on the biscorroles are compared on one hand to the monocorrole having the same substitution pattern and on the other hand to bisporphyrins having two Co(II) ions and the same anthracenyl or biphenylenyl linkers in order to better understand the interaction which occurs between the two corrole macrocycles. A parallel study on five different Co(III) phenyl-substituted corroles showed that bis-pyridine and mono-CO adducts are readily formed from the complexes in CH(2)Cl(2). This present paper examines how the ligand binding properties and electrochemistry of these Co(III) corroles are modified by the anthracenyl or biphenylenyl bridge which links the two macrocycles in a face to face orientation. An X-ray crystal structure was obtained for the tris-pyridine adduct of the anthracenyl bridged derivative, (BCA)Co(2)(py)(3), and gives the following results: C(127)H(99)Co(2)N(11).2CHCl(3), M = 2135.90, triclinic, space group P&onemacr;, a = 13.2555(5) A, b = 18.6406(8) A, c = 22.2140(9) A, alpha = 94.186(9) degrees, beta = 102.273(9) degrees, gamma = 94.205(9) degrees, V = 5326.8(4) A(3), 9293 independent reflections collected, R(F) = 0.066.     

Selective chemisorption of carbon monoxide by organic-inorganic hybrid materials incorporating cobalt(III) corroles as sensing components

Twenty-one hybrid materials incorporating cobalt(III) corrole complexes were synthesized by a sol-gel process or by grafting the metallocorrole onto a mesostructured silica of the SBA-15 type. All the materials show an almost infinite selectivity for carbon monoxide with respect to dinitrogen and dioxygen in the low-pressure domain where the chemisorption phenomenon is predominant. This peculiar property is of prime importance for an application as a CO sensor. The selectivity slightly decreases at high pressures where nonselective physisorption phenomena mainly occur. The percentage of active sites for CO chemisorption ranges from 22 to 64 %. This low percentage may be attributable to interactions between the cobalt(III) corroles with silanol or siloxane groups remaining at the surface of the materials which prevent further coordination of the CO molecule. Notably, the most efficient materials are those prepared in the presence of a protecting ligand (pyridine) during the gelation or the grafting process. The removal of this ligand after the gelation process releases a cavity around the cobalt ion that favors the coordination of a carbon monoxide molecule. The CO adsorption properties of the SBA-15 hybrid were not affected over a period of several months thus indicating a high stability of the material. Conversely, the xerogel capacities slowly decrease owing to the evolution of the material structure.     

Alkyl and aryl substituted corroles. 1. Synthesis and characterization of free base and cobalt containing derivatives. x-ray structure of (Me(4)Ph(5)Cor)Co(py)(2)

The synthesis, spectroscopic properties, and electrochemistry of six different alkyl- and aryl-substituted Co(III) corroles are presented. The investigated compounds contain methyl, ethyl, phenyl, or substituted phenyl groups at the eight beta-positions of the corrole macrocycle and four derivatives also contain a phenyl group at the 10-meso position of the macrocycle. Each cobalt corrole undergoes four reversible oxidations in CH(2)Cl(2) containing 0.1 M tetra-n-butylammonium perchlorate and exists as a dimer in its singly and doubly oxidized forms. The difference in potential between the first two oxidations is associated with the degree of interaction between the two corrole units of the dimer and ranges from an upper value of 0.62 V, in the case of (Me(6)Et(2)Cor)Co, to a lower value of about 0.17 V, in the case of four compounds which have a phenyl group located at the 10-meso position of the macrocycle. These Co(III) corroles strongly coordinate two pyridine molecules or one carbon monoxide molecule in CH(2)Cl(2) media, and ligand binding constants were evaluated using spectroscopic and electrochemical methods. The structure of (Me(4)Ph(5)Cor)Co(py)(2) was also determined by X-ray diffraction. Crystal data: (Me(4)Ph(5)Cor)Co(py)(2).3CH(2)Cl(2).H(2)O, orthorhombic, a = 19.5690(4) A, b = 17.1070(6) A, c = 15.9160(6) A, V = 5328.2(5) A(3), space group Pna2(1), Z = 2, 35 460 observations, R(F) = 0.069.     

Reactions of alkoxy and peroxy radicals with carbon monoxide

Experimental rate constants of the reactions HO^· + CO → H^· + CO₂, RO^· + CO → R^· + CO₂, HO ₂ ^· + CO → HO^· + CO₂, and RO ₂ ^· + CO → RO^· + CO₂ are analyzed in the framework of the intersecting-parabolas model. The transition states of the additions of the methoxy and methylperoxy radicals to carbon monoxide were calculated by quantum-chemical methods. The reactions occur in two consecutive steps: first the HO^· (RO^·, RO ₂ ^· ) radical adds to CO and then the resulting unstable intermediate radical decomposes to evolve CO₂. The kinetic parameters of these reactions are calculated by two methods (using the intersecting-parabolas model and the quantum-chemical method). The activation energies and rate constants of a series of R _i O^· + CO and R _i O ₂ ^· + CO reactions are calculated. A comparison of the kinetic parameters suggests close similarity between the transition states in the additions of the O-centered radicals to CO and olefins.     

Reactions of carbon monoxide with transition metal-carbon bonds

Summary Insertions of carbon monoxide into transition metal-carbon bonds are among the most selective methods for the catalytic introduction of oxygen into organic compounds. A variety of processes are known today and most of them are of great industrial importance. Depending on the nature of the organic substrate, the catalyst and additional reaction components products range from aldehydes, alcohols, and acids to esters, anhydrides, acid chlorides, amides etc. An attempt is made here to show that all these reactions proceed by similar mechanisms.From the book Coordination and Catalysis by G. Henrici-Olive and S. Olive, to be published shortly by Verlag Chemie.     

Alkyl 3-Nitroacrylates in Reactions with Semicarbazide

Russian Journal of General Chemistry - The reactions of alkyl-3-nitroacrylates with semicarbazide as representative of polynitrogen nucleophiles proceeds at room temperature in a solution of...     

Selenium assisted carbonylation of alkyl aryl ketones with carbon monoxide

Selenium assisted carbonylation of alkyl aryl ketones with carbon monoxide leading to formation of 1,3-dicarbonyl compounds as C-carbonylated products is described. o-Hydroxyacetophenone 7a and its derivatives7b,7c, and 7d have been converted to the corresponding 4-hydroxycoumarins 8a,8b,8c and 8d in moderate to quantitative yields by treatment with an equivalent of selenium and carbon monoxide with concomitant formation of hydrogen selenide 9 (Eq.(8)). It was further revealed that oxidation of in situ formed hydrogen selenide to selenium with an appropriate oxidizing agent such as nitrobenzene permitted catalytic use of selenium for the carbonylation of 7. Possible rationalizations for the formation of 4-hydroxycoumarins are suggested.     

Alkyl- and aryl-substituted corroles. 4. Solvent effects on the electrochemical and spectral properties of cobalt corroles

Solvent effects on the electrochemistry and spectroscopic properties of alkyl- and aryl-substituted corroles in nonaqueous media are reported. The oxidation and reduction of six compounds containing zero to seven phenyl or substituted phenyl groups on the macrocycle were studied in four different nonaqueous solvents (CH(2)Cl(2), PhCN, THF, and pyridine) containing 0.1 M tetra-n-butylammonium perchlorate. Dimers were formed upon oxidation of all corroles in CH(2)Cl(2), but this was not the case in the other three solvents, where either monomers or dimers were formed upon oxidation depending upon the solvent Gutmann donor number and the number or location of aryl substituents on the macrocycle. The half-wave potentials were analyzed as a function of the number of aryl substituents on the macrocycle as well as the concentration of added pyridine to PhCN solutions of the compound, and these data were combined with data from the spectroelectrochemistry experiments to determine the stoichiometry of the species actually in solution after the first oxidation or first reduction of each compound. The results of these experiments indicate that reduction of the bispyridine adduct (Cor)Co(III)(py)(2) proceeds via the monopyridine complex (Cor)Co(III)(py) to give in each case the unligated cobalt(II) corrole [(Cor)Co(II)](-). In contrast, pyridine remains coordinated after electrooxidation, and the final product was characterized as [(Cor)Co(III)(py)(2)](+).     

Reactions of homobinuclear platinum and palladium complexes with carbon monoxide

The reactivity of homobimetallic complexes of platinum(II) and palladium(II) containing diethyl(diphenylphosphinomethyl)amine (ddpa = (C₆H₅)₂PCH₂N(C₂H₅)₂) as a bridging ligand has been investigated. Carbon monoxide reacts reversibly with these complexes. The species formed are binuclear carbonyl-bridged derivatives, which can isomerize to ionic terminal carbonyl complexes. Reaction of [PtCl₂(CO)]₂[(C₂H₅)₄N]₂ with ddpa in dichloromethane gives the ionic platinum(I) complex [Pt(ddpa)Cl₂]₂[(C₂H₅)₄N]₂, which reacts with carbon monoxide. Still, homobimetallic derivatives of palladium(I) are unstable, and none have been isolated.     

Alkyl substituted 3-PPP derivatives. Synthesis and biological investigation

Synthesis of alkyl substituted derivatives of 3-(1-propyl)3-piperidinyl)phenol ( 3-PPP ), 2–8 , was carried out in an attempt to improve on the pharmacodynamic properties of 3-PPP. No significant improvement was attained.     

Alkyl 3-Nitroacrylates in Reactions with Substituted Hydrazines

Russian Journal of General Chemistry - The reactions of alkyl 3-nitroacrylates with representatives of aryl(hetaryl) carboxylic acid hydrazides and substituted phenylhydrazines were studied. It was...     

Reactions of Dicyclopentadienyltitanium(III) compounds with carbon monoxide

Reactions of Cp₂TiR (R = Cl, C₆F₅, C₆H₅, o-CH₃C₆H₄) with CO give two types of products: terminally coordinated adducts, Cp₂Ti(R)CO, and insertion products, Cp₂TiCOR, i.e. acyl compounds. The acyl ligand is η²-coordinated at the titanium atom. The preparations and properties of the compounds are described.     

Acid-mediated aryl migration reaction of C-3 aryl substituted pyrrolidinoindolines

Aryl migration reactions of C-3 aryl substituted pyrrolidinoindoline compounds to provide highly conjugated C-2 aryl indole compounds have been discovered. The developed reactions have a wide substrate scope and proceed in high yield under simple acidic conditions. A unique cationic cyclopropane intermediate as the transition state is proposed.     

Alkyl- and aryl-substituted corroles. 5. Synthesis, physicochemical properties, and X-ray structural characterization of copper biscorroles and porphyrin-corrole dyads

The synthesis and characterization of cofacial copper biscorroles and porphyrin-corroles linked by a biphenylenyl or anthracenyl spacer are described. The investigated compounds are represented as (BCA)Cu(2) and (BCB)Cu(2) in the case of the biscorrole (BC) derivatives and (PCA)Cu(2) and (PCB)Cu(2) in the case of porphyrin (P)-corrole (C) dyads, where A and B represent the anthracenyl and biphenylenyl bridges, respectively. A related monomeric corrole (Me(4)Ph(5)Cor)Cu and monomeric porphyrin (Me(2)Et(6)PhP)Cu that comprise the two halves of the porphyrin-corrole dyads were also studied. Electron spin resonance (ESR), (1)H NMR, and magnetic measurements data demonstrate that the copper corrole macrocycle, when linked to another copper corrole or copper(II) porphyrin, can be considered to be a Cu(III) complex in equilibrium with a Cu(II) radical species, copper(III) corrole being the main oxidation state of the corrole species at all temperatures. The cofacial orientation of (BCB)Cu(2), (BCA)Cu(2), and (PCB)Cu(2) was confirmed by X-ray crystallography. Structural data: (BCB)Cu(2)(C(110)H(82)N(8)Cu(2).3CDCl(3)), triclinic, space group P, a = 10.2550(2) A, b = 16.3890(3) A, c = 29.7910(8) A, alpha = 74.792(1) degrees , beta = 81.681(1) degrees , gamma = 72.504(2) degrees , Z = 2; (BCA)Cu(2)(C(112)H(84)N(8)Cu(2).C(7)H(8).1.5H(2)O), monoclinic, space group P 2(1)/c, a = 16.0870(4) A, b = 35.109(2) A, c = 19.1390(8) A, beta = 95.183(3) degrees , Z = 4; (PCB)Cu(2)(C(89)H(71)N(8)Cu(2).CHCl(3)), monoclinic, space group P2(1)/n, a = 16.7071(3) A, b = 10.6719(2) A, c = 40.8555(8) A, beta = 100.870(1) degrees , Z = 4. The two cofacial biscorroles, (BCA)Cu(2) and (BCB)Cu(2), both show three electrooxidations under the same solution conditions. The reduction of (BCA)Cu(2) involves a reversible electron addition to each macrocycle at the same potential of E(1/2) = -0.20 V although (BCB)Cu(2) is reversibly reduced in two steps to give first [(BCB)Cu(2)](-) and then [(BCB)Cu(2)](2)(-), each of which was characterized by ESR spectroscopy as containing a Cu(II) center. These latter electrode reactions occur at E(1/2) = -0.36 and -0.51 V versus a saturated calomel reference electrode. The half-reduced and fully reduced (BCB)Cu(2) show similar Cu(II) ESR spectra, and no evidence of a triplet signal is observed. The two well-separated reductions of (BCB)Cu(2) to give [(BCB)Cu(2)](2)(-) can be attributed to a stronger pi-pi interaction between the two macrocycles of this dimer as compared to those of (BCA)Cu(2). The copper porphyrin-corrole dyads, (PCA)Cu(2) and (PCB)Cu(2), show five reversible oxidations and two reversible reductions, and these potentials are compared with corresponding values for electrochemical reactions of the porphyrin and corrole monomers under the same solution conditions.     

Linear-free energy relationships in solid-state reactions: I. Reactions of cobalt acetate with substituted aniline hydrochlorides

Solid-solid reactions of anhydrous cobalt(II) acetate with various substituted aniline hydrochlorides have been studied. The reaction products, CoCl₂(4-XC₆H₄NH₂)₂, where X = OCH₃, CH₃, F, Br, or Cl, have been characterized. The kinetics have been studied by noting the thickness of the colored boundary of the product. The values of energy of activation are 162.3, 148.6, 120.4, 102.9, and 104.6 kJ mole⁻¹ for X = OCH₃, CH₃, F, Br, and Cl, respectively. A plot of Hammett's constant σ versus log k is linear with values of ϱ 2.321, 2.012, 1.781, and 1.615 at 353, 358, 363, and 368 K, respectively.     

Palladium-catalyzed esterification of aryl halides using aryl formates without the use of external carbon monoxide

Aryl formates are efficient carbon monoxide sources in palladium-catalyzed esterification of aryl halides. The carbonylation readily proceeds at ambient pressure without the use of external carbon monoxide to afford the corresponding esters in high yields.     

Reactions of Roquefortin with Alkyl Chloroformates

Reactions of roquefortin with alkyl chloroformates provide 3-(1-(alkoxycarbonyl)imidazol-4-ylmethylene]-10b-(1,1-dimethyl-2-propenyl)-5a,10b,11,11a-tetrahydro-2H-pyrazinol[1',2':1,5]pyrrolo[2,3-b]indole-1,4(3H,6H)-diones.     

Size and structure dependence of carbon monoxide chemisorption on cobalt clusters

We have carried out a series of ab initio calculations to investigate changes in the structural and magnetic properties of pristine cobalt clusters upon CO chemisorption. Our results show that binding energies of CO to 13-55 atom (0.5-1.5 nm) cobalt nanoparticles and preferred chemisorption sites depend on the cluster structure (whether fcc or icosahedral), size, and surface coverage. In addition, we find a strong influence of CO on the magnetism of the cluster, leading to magnetic moments smaller than in the bulk, at variance with pristine clusters which have magnetic moments larger than the bulk. Our findings suggest important changes in catalytic properties of cobalt at the nanoscale. Our theory suggests that at the nanoscale cluster size and surface coverage might control catalysis.