Aluminum hydride cations stabilized by weakly coordinating carbaalanates

The reactions of t-BuCCLi with a mixture of AlH(3).NMe(3) and ClAlH(2).NMe(3) in boiling toluene with the addition of [t-BuCH(2)(Bzl)NMe(2)]Cl, or a bulky beta-diketimine instead, and [n-Bu(4)N]Cl led to the carbaalanates [H(2)Al(NMe(3))(2)](2)[(AlH)(8)(CCH(2)t-Bu)(6)], 3, and [n-Bu(4)N](2)[(AlH)(8)(CCH(2)t-Bu)(6)], 4, respectively. The reaction of Me(3)N.Al(CCt-Bu)(3) 5 and AlH(3).NMe(3) in boiling toluene yielded [H(n-Bu)Al(NMe(3))(2)][(AlH)(7)(AlNMe(3))(CCH(2)t-Bu)(6)], 6, in trace amounts. The single-crystal X-ray structures of 3 and 6 are reported. The compounds 3, 4, and 6 consist of well-separated ion pairs introducing carbaalanates as weakly coordinating anions and stabilizing aluminum hydride cations.     

Synthesis of zinc trisubstituted hydrazido complexes and ortho-metalation of 4-(dimethylamino)pyridine

The zinc hydrazide complexes [EtZn(N(SiMe(3))NMe(2))](2), [EtZn(N(Me)NMe(2))](4), and Zn(3)Et(4)(N(Et)NMe(2))(2) were synthesized by allowing excess hydrazine, HN(R)NMe(2), to react with diethyl zinc. The product of the reaction between ZnEt(2) and HN(i-Pr)NMe(2)ortho-metalated 4-(dimethylamino)pyridine (DMAP) at room temperature, producing the complex Zn[(NC(5)H(3)-p-NMe(2))ZnEt(N(i-Pr)NMe(2))](2). At elevated temperatures, Zn(3)Et(4)(N(Et)NMe(2))(2) also ortho-metalated DMAP, but [EtZn(N(Me)NMe(2))](4) did not. Single-crystal X-ray diffraction studies revealed that the hydrazide ligands in [EtZn(N(SiMe(3))NMe(2))](2) act as bridging mono-hapto amide ligands, and in Zn(3)Et(4)(N(Et)NMe(2))(2) and Zn[(NC(5)H(3)-p-NMe(2))ZnEt(N(i-Pr)NMe(2))](2) the hydrazide ligands are di-hapto.     

Molecular precursors to gallium oxide thin films

The donor-functionalised alkoxides [Et(2)Ga(OR)](2)(R = CH(2)CH(2)NMe(2)(1), CH(CH(2)NMe(2))(2)(2), CH(2)CH(2)OMe (3), CH(CH(3))CH(2)NMe(2)(4), C(CH(3))(2)CH(2)OMe (5)) were synthesised by the 1:1 reaction of Et(3)Ga with ROH in hexane or dichloromethane at room temperature. Reaction of Et(3)Ga with excess ROH in refluxing toluene resulted in the isolation of a 1:1 mixture of [Et(2)Ga(OR)](2) and the ethylgallium bisalkoxide [EtGa(OR)(2)](R = CH(2)CH(2)NMe(2)(6) or CH(CH(3))CH(2)NMe(2)(7)). X-ray crystallography showed that compound 6 is monomeric and this complex represents the first structurally characterised monomeric gallium bisalkoxide. Homoleptic gallium trisalkoxides [Ga(OR)(3)](2) were prepared by the 1:6 reaction of [Ga(NMe(2))(3)](2) with ROH (R = CH(2)CH(2)NMe(2)(8), CH(CH(3))CH(2)NMe(2)(9), C(CH(3))(2)CH(2)OMe (10)). The decomposition of compounds 1, 4, 5 and 8 were studied by thermal gravimetric analysis. Low pressure CVD of 1 and 5 resulted in the formation of thin films of crystalline Ga(2)O(3).     

Neutral and ionic aluminum,gallium, and indium compounds carrying two or three terminal ethynyl groups

The syntheses of the ionic compounds [Li(+).2 dioxane (2,6-iPr(2)C(6)H(3)N(SiMe(3))Al(C triplebond CSiMe(3))(3))(-)].0.75 dioxane (1), [(Li(+))(2).(dioxane)(7)](0.5) [2,6-iPr(2)C(6)H(3)N(SiMe(3))Ga(C triplebond CSiMe(3))(3)(-)].1.5 dioxane (2), and [(Li(+))(2).(dioxane)(7)](0.5) [2,6-iPr(2)C(6)H(3)N(SiMe(3))In(C triplebond CSiMe(3))(3)(-)].1.5 dioxane (3) by the reaction of the corresponding organo metal chloride with LiC triplebond CSiMe(3) are reported. The neutral ethynyl compounds Br-Al(C triplebond CtBu)(2).2 THF (4), Cl-Ga(C triplebond CtBu)(2).THF (5), Cl-In(C triplebond CtBu)(2).2 THF (6), Al(C triplebond CtBu)(3).C[N(Me)CMe](2) (7), Ga(C triplebond CtBu)(3).dioxane (8), and In(C triplebond CtBu)(3).NEt(3) (9) have been obtained in good yields from the reaction of AlBr(3), GaCl(3), and InCl(3) with LiC triplebond CtBu in the presence of a Lewis base. Compound 7 is the first heterocyclic carbene substituted ethynyl derivative. Aluminum and gallium compounds with three terminal ethynyl groups Al(C triplebond CPh)(3).NMe(3) (10) and Ga(C triplebond CPh)(3).NMe(3) (11) have been prepared by the reaction of AlH(3).NMe(3) or GaH(3).NMe(3) with three equivalents of phenylethyne. All the above-mentioned compounds have been structurally studied. In compound 1 the lithium ion is coordinated to the three terminal ethynyl groups, whereas in compounds 2 and 3 the lithium is coordinated to the solvent (dioxane). Compound 8 crystallizes as a coordination polymer with dioxane molecules bridging the individual gallium units.     

Synthesis of zirconium, hafnium, and tantalum complexes with sterically demanding hydrazide ligands

The bulky hydrazine t-BuN(H)NMe2 was synthesized via hydrazone and t-BuN(H)N(H)Me intermediates as the major component in a 90:5:5 mixture consisting of t-BuN(H)NMe2, t-BuN(Me)N(H)Me, and t-BuN(Me)NMe2. Reacting the mixture with n-BuLi followed by distillation and fractional crystallization led to the isolation of the ligand precursor LiN(t-Bu)NMe2. Lithium hydrazides, LiN(R)NMe2, were reacted with metal chlorides to afford the hydrazide complexes M(N(Et)NMe2)4 (M = Zr or Hf), MCl(N(R)NMe2)3 (M = Zr, R = i-Pr or t-Bu; M = Hf, R = t-Bu), and TaCl3(N(i-Pr)NMe2)2. The X-ray crystal structures of [LiN(i-Pr)NMe2]4, [LiN(t-Bu)NMe2.THF]2, ZrCl(N(R)NMe2)3 (R = i-Pr or t-Bu), and TaCl3(N(i-Pr)NMe2)2 were determined. The structural analyses revealed that the hydrazide ligands in ZrCl(N(R)NMe2)3 (R = i-Pr or t-Bu) and TaCl3(N(i-Pr)NMe2)2 are eta2 coordinated.     

Synthesis and structures of zirconium amide-iodide complexes

Zirconium amide-iodide complexes were synthesized for possible use as chemical vapor deposition precursors to zirconium nitride films. The series of six complexes Zr(NR(2))(4-n)I(n)(R = Me or Et; n = 1-3) was prepared by reacting ZrI(4) and Zr(NR(2))(4) in hot toluene. X-ray crystallographic analyses were performed for Zr(NMe(2))(3)I, Zr(NEt(2))(2)I(2), and Zr(NEt(2))I(3). In the solid state, Zr(NMe(2))(3)I and Zr(NEt(2))(2)I(2) are the discrete dimers [Zr(NMe(2))(2)I(mu-NMe(2))](2) and [Zr(NEt(2))(2)I(mu-I)](2), and Zr(NEt(2))I(3) is the polymer of dimers ([Zr(NEt(2))I(2)(mu-I)](2))(n). In solution, Zr(NEt(2))(3)I is proposed to be monomeric on the basis of NMR data and a molecular weight determination. The complex Zr(NEt(2))(3)I is the most promising precursor candidate because of its physical properties.     

Synthesis and properties of mercury bis(trifluoromethyl)phosphanides and their phosphane complexes

The thermally unstable compounds Hg(CN)P(CF(3))(2) and Hg[P(CF(3))(2)](2) were obtained by reactions of mercury cyanide and bis(trifluoromethyl)phosphane in solution and characterized by multinuclear NMR spectroscopy. An increase in thermal stability is observed when the products form 18 valence electron complexes. The compounds [Hg(P(CF(3))(2))(2)(dppe)] (dppe = 1,2-bis(diphenylphosphanyl)ethane) and [Hg(P(CF(3))(2))(2)(Me(3)P)(2)] have been isolated in almost quantitative yield by reacting [Hg(CN)(2)(dppe)] or [Hg(CN)(2)(Me(3)P)(2)] with HP(CF(3))(2). [Hg(P(CF(3))(2))(2)(dppe)] crystallizes in the triclinic space group P1. The mercury atom is coordinated in a distorted tetrahedral fashion. The Hg-P(CF(3))(2) bonds, ca. 250 pm, are significantly longer than those of the mercury bis(phosphanides) Hg(PR(2))(2) with R = t-Bu, 245 pm, or SiMe(3), 241 pm. These easily accessible compounds [Hg(P(CF(3))(2))(2)(dppe)] and [Hg(P(CF(3))(2))(2)(Me(3)P)(2)] act as nucleophilic bis(trifluoromethyl)phosphane group transfer reagents.     

Catalytic dehydrocoupling of Me2NHBH3 with Al(NMe2)3

The catalytic dehydrocoupling reaction of Me(2)NHBH(3) with Al(NMe(2))(3) gives the dimer [Me(2)NBH(2)](2) and the chain [(Me(2)N)(2)BH], involving the thermally-stable Al(III) hydride catalyst [{(Me(2)N)(2)BH(2)}(2)AlH].     

Rhenium(V) oxo complexes with N-heterocyclic carbenes

Air-stable rhenium(V) oxo complexes are formed when [ReOCl(3)(PPh(3))(2)] is treated with N-heterocyclic carbenes of the 1,3-dialkyl-4,5-dimethylimidazol-2-ylidene type, L(R) (R = Me, Et, i-Pr). Complexes of the compositions [ReO(2)(L(R))(4)](+), [ReOCl(L(R))(4)](2+), or [ReO(OMe)(L(R))(4)](2+) can be isolated depending on the alkyl substituents at the nitrogen atoms of the ligands and the reaction conditions applied. Despite the steric overcrowding of the equatorial coordination spheres of the metal atoms by each of the four carbene ligands, stable complexes with six-coordinate rhenium atoms are obtained. Steric demands of the alkyl groups allow control of the stability of the mono-oxo intermediates. Air-stable cationic complexes of the compositions [ReOCl(L(Me))(4)](2+), [ReOCl(L(Et))(4)](2+), and [ReO(OMe)(L(Me))(4)](2+) have been isolated, whereas reactions of [ReOCl(3)(PPh(3))(2)] or other rhenium(V) precursors with the more bulky 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene (L(i)(-)(Pr)) directly yield the dioxo complex [ReO(2)(L(i)(-)(Pr))(4)](+). X-ray structures of [ReO(2)(L(i)(-)(Pr))(4)][ReO(4)], [ReO(2)(L(i)(-)(Pr))(4)][PF(6)], [ReO(2)(L(Me))(4)][ReO(4)](0.45)[PF(6)](0.55), [ReO(MeOH)(L(Me))(4)][PF(6)](2), and [ReOCl(L(Et))(4)][PF(6)](2) show that the equatorial coordination spheres of the rhenium atoms are essentially planar irrespective of the steric demands of the individual carbene ligands.     

Poly(pyrazolyl)aluminate complexes containing aluminum-hydrogen bonds

The treatment of LiAlH(4) with 2, 3, or 4 equiv of the 3,5-disubstituted pyrazoles Ph(2)pzH or iPr(2)pzH afforded [Li(THF)(2)][AlH(2)(Ph(2)pz)(2)] (97%), [Li(THF)][AlH(Ph(2)pz)(3)] (96%), [Li(THF)(4)][Al(Ph(2)pz)(4)] (95%), and [Li(THF)][AlH(iPr(2)pz)(3)] (89%). The treatment of ZnCl(2) with [Li(THF)][AlH(Ph(2)pz)(3)] afforded Zn(AlH(Ph(2)Pz)(3))H (70%). X-ray crystal structures of these complexes demonstrated κ(2) or κ(3) coordination of the aluminum-based ligands to the Li or Zn ions. The treatment of [Li(THF)][AlH(Ph(2)pz)(3)] with MgBr(2) or CoCl(2) in THF/Et(2)O solutions, by contrast, afforded the pyrazolate transfer products Mg(2)Br(2)(Ph(2)pz)(2)(THF)(3)·2THF (25%) and Co(2)Cl(2)(Ph(2)pz)(2)(THF)(3)·THF (23%) as colorless and blue crystalline solids, respectively. An analogous treatment of [Li(THF)][AlH(Ph(2)pz)(3)] with MCl(2) (M = Mn, Fe, Ni, Cu) afforded metal powders and H(2), illustrating hydride transfer from Al to M as a competing reaction path.     

Tetravalent titanium, zirconium, and cerium oxo and peroxo complexes containing an imidodiphosphinate ligand

Dinuclear Ti(IV), Zr(IV), and Ce(IV) oxo and peroxo complexes containing the imidodiphosphinate ligand [N(i-Pr(2)PO)(2)](-) have been synthesized and structurally characterized. Treatment of Ti(O-i-Pr)(2)Cl(2) with KN(i-Pr(2)PO)(2) afforded the Ti(IV) di-μ-oxo complex [Ti{N(i-Pr(2)PO)(2)}(2)](2)(μ-O)(2) (1) that reacted with 35% H(2)O(2) to give the peroxo complex Ti[N(i-Pr(2)PO)(2)](2)(η(2)-O(2)) (2). Treatment of HN(i-Pr(2)PO)(2) with Zr(O-t-Bu)(4) and Ce(2)(O-i-Pr)(8)(i-PrOH)(2) afforded the di-μ-peroxo-bridged dimers [M{N(i-Pr(2)PO)(2)}(2)](2)(μ-O(2))(2) [M = Zr (3), Ce (4)]. 4 was also obtained from the reaction of Ce[N(i-Pr(2)PO)(2)](3) with 35% H(2)O(2). Treatment of (Et(4)N)(2)[CeCl(6)] with 3 equiv of KN(i-Pr(2)PO)(2) afforded Ce[N(i-Pr(2)PO)(2)](3)Cl (5). Reaction of (Et(4)N)(2)[CeCl(6)] with 2 equiv of KN(i-Pr(2)PO)(2) in acetonitrile, followed by treatment with Ag(2)O, afforded the μ-oxo-bridged complex [Ce{N(i-Pr(2)PO)(2)}Cl](2)[μ-N(i-Pr(2)PO)(2)](2)(μ-O) (6). 6 undergoes ligand redistribution in CH(2)Cl(2) in air to give 5. The solid-state structures of [K(2){N(i-Pr(2)PO)(2)}(2)(H(2)O)(8)](n) and complexes 1-6 have been determined.     

Boron and aluminum complexes of sterically demanding phosphinimines and phosphinimides

Reactions of sterically demanding phosphinimines R3PNH [R=i-Pr (1), t-Bu (2)] were examined. Reactions with B(C6F5)3 formed the adducts (R3PNH)B(C6F5)3 [R=i-Pr (3), t-Bu (4)] in high yield. On the other hand, 2 reacts with HB(OBu)2, evolving H2 to give t-Bu3PNB(OBu)2 (5). The reaction of 2 equiv of 2 with BH3.SMe2 affords the species (t-Bu3PN)2BH (6). In contrast, the reaction of n-Bu(t-Bu)2PNH with BH3.SMe2 results in the formation of the robust adduct n-Bu(t-Bu)2PNH.BH3 (8). An alternative route to borane-phosphinimide complexes involves Me3SiCl elimination, as exemplified by the reaction of BCl2Ph with n-Bu3PNSiMe3, which gives the product n-Bu3PNBCl(Ph) (9). The corresponding reactions of the parent phosphinimines 1 and 2 with AlH3.NMe2Et give the dimers [(mu-i-Pr3PN)AlH2]2 (10) and [(mu-t-Bu3PN)AlH2]2 (11). Species 11 reacts further with Me3SiO3SCF3 to provide [(mu-t-Bu3PN)AlH(OSO2CF3)]2 (12). The reaction of the lithium salt [t-Bu3PNLi]4 (13) with BCl3 proceeds smoothly to give t-Bu3PNBCl2 (14), which is readily alkylated to give t-Bu3PNBMe2 (15). Subsequent reaction of 15 with B(C6F5)3 results in methyl abstraction and the formation of [(mu-t-Bu3PN)BMe]2[MeB(C6F5)3]2 (16). The reaction of 13 in a 2:1 ratio with BCl3 gives the salt [(t-Bu3PN)2B]Cl (17). This species can be methylated to give (t-Bu3PN)2BMe (18), which undergoes subsequent reaction with [Ph3C][X] (X=[B(C6F5)4], [PF6]) to form the related salts [(t-Bu3PN)2B][B(C6F5)4] (19) and [(t-Bu3PN)2B][PF6] (20), respectively. Analogous reactions with [Ph3C][BF4] afforded [t-Bu3PNBF2]2 (21). Compounds 3, 4, 6, 8, 11, 12, 17, 19, and 21 were characterized by X-ray crystallography.     

Secondary Amine Stabilized Aluminum Hydrides Derived from N,N'-Di-tert-butylethylenediamines

The metalation of substituted N,N'-di-tert-butylethylenediamines by various aluminum hydride sources has been investigated. HN(t-Bu)CH(t-Bu)CH(2)N(H)(t-Bu) forms a dimeric lithium chelated adduct of LiAlH(4), [{[HN(t-Bu)CH(t-Bu)CH(2)N(H)(t-Bu)]Li(&mgr;-H)(2)AlH(2)}(2)], 4, which thermally decomposes to yield the tetrameric lithium diamidoaluminum hydride [{Li[N(t-Bu)CH(t-Bu)CH(2)N(t-Bu)]AlH(2)}(4)], 5. The same diamine reacts with AlH(3).NMe(3) or AlH(3) diethyl etherate to give the secondary amine stabilized amidoaluminum hydride species [{HN(t-Bu)CH(t-Bu)CH(2)N(t-Bu)}AlH(2)], 2. Similarly, the same aluminum hydride sources react with the diamine rac-HN(t-Bu)CH(Me)CH(Me)N(H)(t-Bu) to yield [{rac-HN(t-Bu)CH(Me)CH(Me)N(t-Bu)}AlH(2)], 3. Compounds 2 and 3 are stable with respect to elimination of hydrogen to form diamidoaluminum hydrides, but can be converted to the alane rich species, [H(2)Al{N(t-Bu)CH(t-Bu)CH(2)N(t-Bu)}AlH(2)],6, and [H(2)Al{rac-N(t-Bu)CH(Me)CH(Me)N(t-Bu)}AlH(2)], 7, by reaction with AlH(3).NMe(3) under special conditions. The varying reactivity of the three aluminum hydride sources in these reactions has enabled mechanistic information to be gathered, and the effect of the different steric requirements in the diamines on the stability of the complexes is discussed. Crystals of 3are monoclinic, space group P2(1)/n (No. 14), with a = 8.910(4), b = 14.809(1), and c = 12.239(6) ?, beta = 109.76(2) degrees, V = 1520(1) ?(3), and Z = 4. Crystals of 4 are orthorhombic, space group Pbca (No. 61), with a = 15.906(9), b = 24.651(7), and c = 9.933(7) ?, V = 3895(3) ?(3), and Z = 4. Crystals of 6 are monoclinic, space group P2(1)/c (No. 14), with a = 8.392(1), b = 17.513(2), and c = 12.959(1) ?, beta = 107.098(8) degrees, V = 1820.4(3) ?(3), and Z = 4.     

Titanium, zinc and alkaline-earth metal complexes supported by bulky O,N,N,O-multidentate ligands: syntheses, characterisation and activity in cyclic ester polymerisation

The reactions of the bulky amino-bis(phenol) ligand Me(2)NCH(2)CH(2)N[CH(2)-3,5-Bu(t)(2)-C(6)H(2)OH-2](2)(1-H(2)) with Zn[N(SiMe(3))(2)](2)(4), [Mg[N(SiMe(3))(2)](2)](2)(5) and Ca[N(SiMe(3))(2)](2)(THF)(2)(6) yield the complexes 1-Zn, 1-Mg and 1-Ca in good yields. The X-ray structure of 1-Ca showed the complex to be dimeric, with calcium in a distorted octahedral coordination geometry. Five of the positions are occupied by an N(2)O(3) donor set, while the sixth is taken up by an intramolecular close contact to an o-Bu(t) substituent, a rare case of a Ca...H-C agostic interaction (Ca...H distances of 2.37 and 2.41 Angstroms). Another sterically hindered calcium complex, Ca[2-Bu(t)-6-(C(6)F(5)N=CH)C(6)H(3)O](2)(THF)(2).(C(7)H(8))(2/3)(7), was prepared by reaction of 6 with the iminophenol 2-Bu(t)-6-(C(6)F(5)N=CH)C(6)H(3)OH (3-H). According to the crystal structure 7 is monomeric and octahedral, with trans THF ligands. The complex Ti[N[CH(2)-3-Bu(t)-5-Me-C(6)H(2)O-2](2)[CH(2)CH(2)NMe(2)]](OPr(i))(2)(2-Ti) was prepared by treatment of Ti(OPr(i)(4)) with the new amino-bis(phenol) Me(2)NCH(2)CH(2)N[CH(2)-3-Bu(t)-5-Me-C(6)H(2)OH-2](2)(2-H(2)). The reduction of 2-Ti with sodium amalgam gave the titanium(III) salt Ti[N[CH(2)-3-Bu(t)-5-Me-C(6)H(2)O-2](2)[CH(2)CH(2)NMe(2)]](OPr(i))(2).Na(THF)(2)(8). A comparison of the X-ray structures of 2-Ti and 8 showed that the additional electron in 8 significantly reduced the intensity of the pi-bonding from the oxygen atoms of the isopropoxide groups to titanium. 1-Ca and 8 were active initiators for the ring-opening polymerisation of epsilon-caprolactone (up to 97% conversion of 200 equivalents in 2 hours) and yielded polymers with narrow molecular weight distributions.     

Synthesis and hydroamination catalysis with 3-aryl substituted pyrrolyl and dipyrrolylmethane titanium(IV) complexes

Using an iridium-catalyzed borylation/Suzuki-Miyaura coupling sequence several 3-aryl-pyrroles were accessed; in addition, dipyrrolylmethanes incorporating these 3-arylpyrroles were synthesized. Using the monodentate pyrrolyls, Ti(NMe(2))(2)(HNMe(2))(pyr(3,5-CF3))(2) (1) and a 2,4-diarylpyrrolyl complex Ti(NMe(2))(3)(pyr(Ar/Ar')) (2) were prepared and structurally characterized. Titanium species bearing the new dipyrrolylmethane ligands Ti(NMe(2))(2)(NHMe(2))(dpm(3,5-CF3)) (3) and Ti(NMe(2))(2)(NHMe(2))(dpm(F3)) (4) were also generated. Kinetics under pseudo-first order conditions with 3 and 4 showed them to be measurably more active than the parent derivative without the electron-withdrawing aryl groups.     

Investigations on the interaction of dichloroaluminum carboxylates with Lewis bases and water: an efficient road toward oxo- and hydroxoaluminum carboxylate complexes

A series of dichloroaluminum carboxylates [Cl(2)Al(O(2)CR)](2) (were R = Ph (1a), (t)Bu (1b), CHCH(2) (1c) and C(11)H(23) (1d)) were prepared and extended investigations on their structure and reactivity toward various Lewis bases and H(2)O performed. Compounds [Cl(2)Al(O(2)CR)](2) and their adducts with Lewis bases show a large structural variety, featuring both molecular and ionic forms with different coordination numbers of the metal center and various coordination modes of the carboxylate ligand. Upon addition of a Lewis base of moderate strength the molecular form [Cl(2)Al(O(2)CR)](2) equilibrates with new ionic forms. In the presences of 4-methylpyridine the six-coordinate Lewis acid-base adducts [Cl(2)Al(λ(2)-O(2)CR)(py-Me)(2)] [R = Ph (3a), (t)Bu (3b)] with a chelating carboxylate ligand were formed. The reactions of 1a, 1b, and 1d with 0.33 equiv of H(2)O in THF-toluene solution lead to oxo carboxylates [(Al(3)O)(O(2)CR)(6)(THF)(3)] [AlCl(4)] [where R = Ph (4a(THF)), (t)Bu (4b(THF)), and C(11)H(23) (4d(THF))] in high yield. The similar reaction of 1c in tetrahydrofuran (THF) afforded the chloro(hydroxo)aluminum acrylate [(ClAl)(2)(OH)(O(2)CC(2)H(3))(2) (THF)(4)][AlCl(4)] (5), while the hydrolysis of 1b in MeCN lead to the hydroxoaluminum carboxylate [Al(2)(OH)(O(2)C(t)Bu)(2)(MeCN)(6)][AlCl(4))(3)] (6). All compounds were characterized by elemental analysis, (1)H, (27)Al NMR, and IR spectroscopy, and the molecular structure of 1a, 3a, 3b, 4a(THF), 4b(THF), 4b(py-Me'), 5, and 6 were determined by single-crystal X-ray diffraction. The study provides a platform for testing transformations of secondary building units in Al-Metal-Organic Frameworks toward H(2)O and neutral donor ligands.     

Rare earth metal bis(amide) complexes bearing amidinate ancillary ligands: synthesis, characterization, and performance as catalyst precursors for cis-1,4 selective polymerization of isoprene

A family of rare earth metal bis(amide) complexes bearing monoanionic amidinate [RC(N-2,6-Me(2)C(6)H(3))(2)](-) (R = cyclohexyl (Cy), phenyl (Ph)) as ancillary ligands were synthesized and characterized. One-pot salt metathesis reaction of anhydrous LnCl(3) with one equivalent of amidinate lithium [RC(N-2,6-Me(2)C(6)H(3))(2)]Li, following the introduction of two equivalents of NaN(SiMe(3))(2) in THF at room temperature afforded the neutral and unsolvated mono(amidinate) rare earth metal bis(amide) complexes [RC(N-2,6-Me(2)C(6)H(3))(2)]Y[N(SiMe(3))(2)](2) (R = Cy (1); R = Ph (2)), and the "ate" mono(amidinate) rare earth metal bis(amide) complex [CyC(N-2,6-Me(2)C(6)H(3))(2)]Lu[N(SiMe(3))(2)](2)(μ-Cl)Li(THF)(3) (3) in 61-72% isolated yields. These complexes were characterized by elemental analysis, NMR spectroscopy, FT-IR spectroscopy, and X-ray single crystal diffraction. Single crystal structural determination revealed that the central metal in complexes 1 and 2 adopts a distorted tetrahedral geometry, and in complex 3 forms a distorted trigonal bipyramidal geometry. In the presence of AlMe(3), and in combination with one equimolar amount of [Ph(3)C][B(C(6)F(5))(4)], complexes 1 and 2 showed high activity towards isoprene polymerization to give high molecular weight polyisoprene (M(n) > 10(4)) with good cis-1,4 selectivity (>90%).     

Further characterization of Mitsunobu-type intermediates in the reaction of dialkyl azodicarboxylates with P(III) compounds

Structural characterization of compounds analogous to the proposed intermediates in the Mitsunobu esterification process is achieved by the combined use of NMR spectroscopy and X-ray diffractometric studies. The results show that compounds (t-BuNH)P(mu-N-t-Bu)(2)P[(N-t-Bu)(N-(CO(2)R)-N(H)(CO(2)R))] [R = Et (11), i-Pr (12)], obtained by treating [(t-Bu-NH)P-mu-N-t-Bu](2) (10) with diethylazodicarboxylate (DEAD) or diisopropylazodicarboxylate (DIAD), respectively, have a structure with the NH proton residing between the two nitrogen atoms ((P)N(t-Bu) and (P)N-N(CO(2)Et)); this is the tautomeric form of the expected betaine (t-BuNH)P(mu-N-t-Bu)(2)P(+)[(NH-t-Bu)(N-(CO(2)R)-N(-)(CO(2)R)]. Treatment of ClP(mu-N-t-Bu)(2)P[(N-t-Bu){N-(CO(2)-i-Pr)-N(H)(CO(2)-i-Pr)] (6) with 2,6-dicholorophenol affords (2,6-Cl(2)-C(6)H(3)-O)P(mu-N-t-Bu)(2)P(+)[(NH-t-Bu){N[(CO(2)i-Pr)(HNCO(2)i-Pr)]}](Cl(-))(2,6-Cl(2)-C(6)H(3)-OH) (14) that has a structure similar to that of (CF(3)CH(2)O)P(mu-N-t-Bu)(2)P(+)[(NH-t-Bu){N[(CO(2)i-Pr)(HNCO(2)i-Pr)]}](Cl(-)) (13), but with an additional hydrogen bonded phenol. Both of these have the protonated betaine structure analogous to that of Ph(3)P(+)N(CO(2)R)NH(CO(2)R)(R'CO(2))(-) (2) proposed in the Mitsunobu esterification. Two other compounds, (ArO)P(mu-N-t-Bu)(2)P(+)(NH-t-Bu){N(CO(2)i-Pr)(HNCO(2)i-Pr)}(Cl(-)) [Ar = 2,6-Me(2)C(6)H(3)O- (15) and 2-Me-6-t-Bu-C(6)H(3)-O- (16)], are also prepared by the same route. Although NMR tube reactions of 11 or 12 with tetrachlorocatechol, catechol, 2,2'-biphenol, and phenol revealed significant changes in the (31)P NMR spectra, attempted isolation of these products was not successful. On the basis of (31)P NMR spectra, the phosphonium salt structure (t-BuNH)P(mu-N-t-Bu)(2)P(+)[(HN-t-Bu){N-(CO(2)R)-N(H)(CO(2)R)](ArO(-)) is proposed for these. The weakly acidic propan-2-ol or water did not react with 11 or 12. Treatment of 12 with carboxylic acids/ p-toluenesulfonic acid gave the products (t-BuNH)P(mu-N-t-Bu)(2)P(+)[(HN-t-Bu){N-(CO(2)-i-Pr)-N(H)(CO(2)-i-Pr)](ArCO(2)(-)) [Ar = Ph (18), 4-Cl-C(6)H(4)CH(2) (19), 4-Br-C(6)H(4) (20), 4-NO(2)-C(6)H(4) (21)] and (t-BuNH)P(mu-N-t-Bu)(2)P(+)[(HN-t-Bu){N-(CO(2)-i-Pr)-N(H)(CO(2)-i-Pr)](4-CH(3)-C(6)H(4)SO(3)(-)) (22) that have essentially the same structure as 2. Compound 18 has additional stabilization by hydrogen bonding, as revealed by X-ray structure determination. Finally it is shown that the in situ generated (t-BuNH)P(mu-N-t-Bu)(2)P(+)[(HN-t-Bu){N-(CO(2)Et)-N(H)(CO(2)Et)](4-NO(2)-C(6)H(4)CO(2)(-)) can also effect Mitsunobu esterification. A comparison of the Ph(3)P-DIAD system with the analogous synthetically useful Ph(3)P-dimethyl acetylenedicarboxylate (DMAD) system is made.     

Synthesis and characterization of thermally robust amidinato group 13 hydride complexes

The reactivity of two sterically bulky amidines, ArNC(R)N(H)Ar (Ar=2,6-diisopropylphenyl; R=H (HFiso); tBu, (HPiso)) towards LiMH4, M=Al or Ga, [AlH3(NMe3)], and [GaH3(quin)] (quin=quinuclidine) has been examined. This has given rise to a variety of very thermally stable aluminum and gallium hydride complexes. The structural motif adopted by the prepared complexes has been found to be dependent upon both the amidinate ligand and the metal involved. The 1:1 reaction of HFiso with LiAlH4 yielded dimeric [{AlH3(mu-Fiso)Li(OEt2)}2]. Amidine HFiso reacts in a 1:1 ratio with [AlH3(NMe3)] to give the unusual hydride-bridging dimeric complex, [{AlH2(Fiso)}2], in which the Fiso- ligand is nonchelating. The equivalent reaction with the bulkier amidine, HPiso, yielded a related hydride-bridging complex, [{AlH2(Piso)}2], in which the Piso- ligand is chelating. In contrast, the treatment of [GaH3(quin)] with one equivalent of HFiso afforded the four-coordinate complex [GaH2(quin)(Fiso)], in which the Fiso- ligand acts as a localized monodentate amido-imine ligand. The 2:1 reactions of HFiso with [AlH3(NMe3)] or [GaH3(quin)] gave the monomeric complexes [MH(Fiso)2], which are thermally robust and which exhibit chelating amidinate ligands. In contrast, HPiso did not give 2:1 complexes in its reactions with either of the Group 13 trihydride precursors. For sake of comparison, the reactions of [AlH3(NMe3)] and [GaH3(quin)] with the bulky carbodiimide ArN=C=NAr and the thiourea Ar(H)NC(=S)N(H)Ar were examined. These last reactions afforded the five-coordinate thioureido complexes, [MH{N(Ar)C[N(H)(Ar)]S}2], M=Al or Ga.     

Synthesis of the (N2)3- radical from Y2+ and its protonolysis reactivity to form (N2H2)2- via the Y[N(SiMe3)2]3/KC8 reduction system

Examination of the Y[N(SiMe(3))(2)](3)/KC(8) reduction system that allowed isolation of the (N(2))(3-) radical has led to the first evidence of Y(2+) in solution. The deep-blue solutions obtained from Y[N(SiMe(3))(2)](3) and KC(8) in THF at -35 °C under argon have EPR spectra containing a doublet at g(iso) = 1.976 with a 110 G hyperfine coupling constant. The solutions react with N(2) to generate (N(2))(2-) and (N(2))(3-) complexes {[(Me(3)Si)(2)N](2)(THF)Y}(2)(μ-η(2):η(2)-N(2)) (1) and {[(Me(3)Si)(2)N](2)(THF)Y}(2)(μ-η(2):η(2)-N(2))[K(THF)(6)] (2), respectively, and demonstrate that the Y[N(SiMe(3))(2)](3)/KC(8) reaction can proceed through an Y(2+) intermediate. The reactivity of (N(2))(3-) radical with proton sources was probed for the first time for comparison with the (N(2))(2-) and (N(2))(4-) chemistry. Complex 2 reacts with [Et(3)NH][BPh(4)] to form {[(Me(3)Si)(2)N](2)(THF)Y}(2)(μ-N(2)H(2)), the first lanthanide (N(2)H(2))(2-) complex derived from dinitrogen, as well as 1 as a byproduct, consistent with radical disproportionation reactivity.