Fine tuning of the electronic properties of linear pi-conjugated oligomers by covalent bridging

A series of oligothienylenevinylenes, pi-conjugated oligomers rigidified by ethylene bridges attached at different sites of the conjugated backbone, have been constructed by multistep synthetic methodologies. Electronic absorption spectra show that the rigidification of the conjugated system produces a bathochromic shift of the absorption maximum and a narrowing of the HOMO-LUMO energy gap, as compared to the spectra of an open-chain reference compound. The cyclic voltammograms of all oligomers show that these compounds can be reversibly oxidized into their cation radicals and dications and that rigidification produces a large negative shift of the first oxidation potential, which is indicative of a considerable increase of the HOMO level. Electrochemical data confirm that covalent bridging strongly affects the HOMO and LUMO levels and these data demonstrate that the sites of fixation of the bridges on the pi-conjugated backbone exert a determining effect on the relative stability of the cation radical and dication. Examination of these various results in the light of theoretical calculations shows that in addition to a local control of bond length alternation, and hence of the HOMO-LUMO gap, the fixation of covalent bridges at selected positions of the pi-conjugated system limits the deformation of the pi-conjugated structure upon oxidation to the charged states.     

Delineating poly(aniline) redox chemistry by using tailored oligo(aryleneamine)s: towards oligo(aniline)-based organic semiconductors with tunable optoelectronic properties

The simple and elegant Buchwald-Hartwig cross-coupling reaction has been used to synthesise a designed range of new aniline-based tetramers in one step, and without the need for protecting groups. Variation of the central aromatic ring has provided the opportunity to carefully tune the optoelectronic properties in this series, thus enabling a structure-activity relationship study by using a range of photophysical and electrochemical techniques. As a result, the long-proposed sequences of electron-electron (EE) and electron-chemical (EC) processes that support the complex redox and proton-transfer reactions involved in the well-known switching of redox states of poly- and oligo(aniline)s are revealed here for the first time. We also present the initial results from time-dependent DFT calculations to clarify the optoelectronic behaviour of these oligomers. The dc-conductivity measurements of conducting thin films of this series, doped with the prototypical poly(aniline) protonating agent D,L-camphor-10-sulfonic acid (CSA), externally plasticised with triphenyl phosphate (TPP), and processed from m-cresol (MC) solutions, are also presented.     

Dendritic oligothiophenes terminated with tris(alkyloxy)phenylethynyl tails: synthesis, physical properties, and self-assembly

Three-dimensional (3D) π-conjugated dendritic oligothiophenes up to a third generation have been functionalized with tris(decyloxy)phenylethynyl tails at the periphery. The first-generation compounds (3 T-p-Ph-C10 and 6 T-p-Ph-C10) were synthesized by palladium-catalyzed Sonogashira coupling reactions, whereas the higher generation products were synthesized by palladium-catalyzed Suzuki coupling reactions in a divergent approach. The optical and electrochemical properties were investigated by UV/Vis absorption, fluorescence spectroscopy, and cyclic voltammetry. The results revealed that the terminal tris(alkyloxy)phenylethynyl groups are conjugated to the branched oligothiophene core, yielding redshifted absorption and fluorescence spectra and reduced optical band gaps relative to the dendritic oligothiophene core. A structural study revealed a close relationship between the type of supramolecular organization and the size of the oligothiophene core. The first-generation compounds 3 T-p-Ph-C10 and 6 T-p-Ph-C10 displayed columnar phases in the bulk state, which was confirmed by two-dimensional wide-angle X-ray scattering (2D WAXS) measurements. The self-assembly into columnar stacks has mainly been attributed to phase separation between the rigid thiophene cores and the flexible side-chains assisted by minor π-stacking interactions between the conjugated dendritic oligothiophene units. The high-generation compounds, however, showed less ordered structures in the solid state.     

Thieno[3,4-b]-1,4-oxathiane: an unsymmetrical sulfur analogue of 3,4-ethylenedioxythiophene (EDOT) as a building block for linear pi-conjugated systems

[reaction: see text] An unsymmetrical analogue of 3,4-ethylenedioxythiophene (EDOT) has been synthesized by transetherification of 3,4-dimethoxythiophene. Electropolymerization leads to a stable electroactive polymer with electrochemical and electronic properties intermediate between those of the two symmetrical parent polymers poly(EDOT) and poly(3,4-ethylenedithiathiophene). Experimental work shows that the 2- and 5-positions possess a different reactivity, thus opening the possibility of synthesizing regioregular oligomers or polymers.     

Electronic properties and reactivity of short-chain oligomers of 3,4-phenylenedioxythiophene (PheDOT)

The dimer and trimer of 3,4-phenylenedioxythiophene (PheDOT) have been synthesized. Unlike the parent systems based on 3,4-ethylenedioxythiophene (EDOT), these compounds are quite stable under atmospheric conditions. The electronic absorption spectra of di- and tri-PheDOT exhibit a well-resolved vibronic fine structure indicative of self-rigidification of the conjugated structure by noncovalent intramolecular sulfur-oxygen interactions. Comparison of UV-visible data for the PheDOT oligomers with those of the corresponding EDOT oligomers reveals a faster decrease of the HOMO-LUMO gap with chain length for the former. Cyclic voltammetric data show that whereas PheDOT oxidizes at a lower potential than EDOT, the PheDOT dimer and trimer exhibit much higher oxidation potentials than their EDOT-based analogues. A comparative analysis of the electropolymerization of the three PheDOT-based systems shows that although PheDOT is very difficult to polymerize, its dimer and trimer can be readily electropolymerized. This unexpected increase of reactivity with chain extension is discussed with the aid of theoretical calculations.     

Two-photon absorption in quadrupolar pi-conjugated molecules: influence of the nature of the conjugated bridge and the donor-acceptor separation

Quadrupolar-type substitution of pi-conjugated chromophores with donor and acceptor groups has been shown to increase their two-photon absorption (TPA) response by up to two orders of magnitude. Here, we apply highly correlated quantum-chemical calculations to evaluate the impact of the nature of conjugated bridge and the charge-transfer distance on that enhancement. We compare chromophores with phenylenevinylene-, thienylenevinylene-, polyene-, and indenofluorene-type backbones substituted by dimethylamino and cyano groups. In all compounds, we find a strongly TPA-active A(g) state (either 2A(g) or 3A(g)) in the low-energy region, as well as a higher lying TPA-active state (mA(g)) at close to twice the energy of the lowest lying one-photon allowed state; the smaller energy detuning in the mA(g) states results in very large TPA cross sections delta. We also investigate the influence of the degree of ground-state polarization on TPA. Independent of the nature of the backbone and the donor-acceptor separation, delta displays the same qualitative evolution with a maximum before the cyanine-like limit; the highest TPA cross sections are calculated for distirylbenzene- and polyene-based systems.     

Synthesis and characterization of monosubstituted and disubstituted poly(3,4‐propylenedioxythiophene) derivatives with high electrochromic contrast in the visible region

Monosubstituted and disubstituted 3,4‐propylenedioxythiophenes were synthesized and polymerized by both chemical and electrochemical methods. All the monomers were characterized for their molecular structures, and the polymers were characterized for their electrochemical properties. The disubstituted derivatives showed higher contrast than the corresponding monoalkyl derivatives. The highest electrochromic contrast of 89% was exhibited by a dibenzyl derivative, but the derivative was insoluble. On the other hand, the electrochemically polymerized dihexyl‐ and didodecyl‐substituted poly(3,4‐propylenedioxythiophene)s exhibited 74 and 77% electrochromic contrast, respectively, and were soluble. The molecular weights of the chemically and electrochemically synthesized polymers were analyzed by gel permeation chromatography. The chemically synthesized polymers showed higher molecular weights. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 419–428, 2005     

Synthesis and microwave absorbing properties of poly(3,4‐ethylenedioxythiophene) (PEDOT) microspheres

Poly(3,4‐ethylenedioxythiophene) (PEDOT) solid and hollow microspheres were successfully synthesized by simply adjusting the concentration of 3,4‐ethylenedioxythiophene (EDOT) and the molar ratio of EDOT to ammonium persulfate (APS) (represented by (EDOT)/(APS)), respectively. Microwave absorbing properties of PEDOT microspheres with tunable reflection loss (RL) and microwave frequency band were described in detail. The relationships between the conductivity and RL of PEDOT microspheres were also discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

Organic solvent dispersion of poly(3,4‐ethylenedioxythiophene) with the use of polymeric ionic liquid

A nonaqueous dispersion of poly(3,4‐ethylenedioxythiophene) (PEDOT) was prepared with the use of polymeric ionic liquid (PIL) as a polymerization template and phase transfer medium. A detailed investigation was performed to understand the role of PIL in the course of polymerization and phase transfer reaction. On the basis of our findings from X‐ray photoelectric spectroscopy (XPS), we propose a mechanism by which the PIL leads to the nanostructured PEDOT colloids in various organic solvents and thus facilitating smoother surface morphologies of the PEDOT‐PIL films. In addition, the enhancement of charge transport was observed for PEDOT‐PIL complex when compared with PEDOT without PIL. Raman spectroscopy indicates that there is a reduced interaction between the charge carriers on the PEDOT and the counter ions bound to PIL, thus promoting charge carrier hopping rates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6872–6879, 2008     

Beyond the structure-property relationship paradigm: influence of the crystal structure and microstructure on the Li+ conductivity of La2/3Li(x)Ti(1-x)Al(x)O3 Oxides

The crystal structures of several oxides of the La(2/3)Li(x)Ti(1-x)Al(x)O(3) system have been studied by selected-area electron diffraction, high-resolution transmission electron microscopy, and powder neutron diffraction, and their lithium conductivity has been by complex impedance spectroscopy. The compounds have a perovskite-related structure with a unit cell radical2 a(p)x2 a(p)x radical2 a(p) (a(p)=perovskite lattice parameter) due to the tilting of the (Ti/Al)O(6) octahedra and the ordering of lanthanum and lithium ions and vacancies along the 2 a(p) axis. The Li(+) ions present a distorted square-planar coordination and are located in interstitial positions of the structure, which could explain the very high ionic conductivity of this type of material. The lithium conductivity depends on the oxide composition and its crystal microstructure, which varies with the thermal treatment of the sample. The microstructure of these titanates is complex due to formation of domains of ordering and other defects such as strains and compositional fluctuations.     

Synthesis of 3,4-alkoxythieno[2,3-b]thiophene derivatives. The first block copolymer associating the 3,4-ethylenedioxythieno[2,3-b]thiophene (EDOThT) unit with 3,4-ethylenedioxythiophene (EDOT) moieties

The synthesis of 3,4-alkoxythieno[2,3-b]thiophene derivatives has been developed from the readily accessible dimethyl or diethyl 3,4-dihydroxythieno[2,3-b]thiophenedicarboxylates. The yields for the dialkoxy derivatives were strongly dependent both on the base and the alkylating agent used for the nucleophilic substitutions. A trimer associating the new 3,4-ethylenedioxy-thieno[2,3-b]thiophene unit with 3,4-ethylenedioxythiophene moieties has been synthesized and electropolymerized.     

Efficient enhancement of the thermoelectric performance of vapor phase polymerized poly(3,4‐ethylenedioxythiophene) films with poly(ethyleneimine)

Tuning the molecular rearrangement and oxidation level has been proven to be effective strategies for optimizing the thermoelectric (TE) performance of PEDOT. It is difficult to achieve these effects simultaneously via a one‐step process, however. In this work, we combined vapor phase polymerization (VPP) and H₂SO₄ post‐treatment to obtain a highly conductive PEDOT film. A novel strategy using polyethylenemine (PEI) as an effective reducing agent was employed to enhance the thermopower of the PEDOT film. Grazing‐Incidence Wide‐Angle X‐ray Scattering analysis and the changes in the oxidation level allow us to elucidate the role of PEI and its transport mechanism. It is demonstrated that the thermopower of well‐ordered crystallites in the PEDOT film significantly increases more than five times (from 11 to 59 μV K^?1) by the PEI‐DMF solution immersion process, while the electrical conductivity is maintained at 100 S cm^?1. The promising method connecting VPP, H₂SO₄, and PEI shows great potential for effectively tuning the thermopower of organic TE materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 257–265     

Investigation of the doping efficiency of poly(styrene sulfonic acid) in poly(3,4‐ethylenedioxythiophene)/poly(styrene sulfonic acid) dispersions by capillary electrophoresis

CE can efficiently separate poly(3,4‐ethylenedioxythiophene)/poly(styrene sulfonic acid) (PEDOT/PSS) complexes and free PSS in dispersions and can be used to estimate the degree of PSS doping. We investigated the doping efficiency of PSS on PEDOT in dispersions using CE and its effect on the conductivity of the resulting PEDOT/PSS films. Results of this study indicate that dispersions containing 1:2.5–3 EDOT:PSS feed ratio (by weight) exhibiting 72–73% PSS doping generate highly processable and highly conductive films. Conductivity can be optimized by limiting the time of reaction to 12 h. At this point of the reaction, the PEDOT/PSS segments, appearing as broad band in the electropherogram, could still exist in an extended coil conformation favoring charge transport resulting in high conductivity. Above a threshold PEDOT length formed at reaction times longer than 12 h, the PEDOT/PSS complex, appearing as spikes in the electropherogram, most likely have undergone a conformational change to coiled core‐shell structure restricting charge transport resulting in low conductivity. The optimal conductivity (5.2 S/cm) of films from dispersions synthesized for 12 h is significantly higher than those from its commercial equivalent Clevios P and other reported values obtained under similar conditions without the addition of codopants.     

Determination of Uric Acid in the Presence of Ascorbic Acid Using Poly(3,4‐ethylenedioxythiophene)‐Modified Electrodes

A poly(3,4‐ethylenedioxythiophene) (PEDOT) modified glassy carbon electrode (GCE) was used to determine uric acid in the presence of ascorbic acid at physiological pH facilitating a peak potential separation of ascorbic acid and uric acid oxidation (ca. 365 mV), which is the largest value reported so far in the literature. Also, an analytical protocol involving differential pulse voltammetry has been developed using a microchip electrode for the determination of uric acid in the concentration range of 1 to 20 μM in presence of excess of ascorbic acid.     

Cellular adhesion and proliferation on poly(3,4-ethylenedioxythiophene): Benefits in the electroactivity of the conducting polymer

Cell adhesion and proliferation in poly(3,4-ethylenedioxythiophene), an electroactive polythiophene derivative generated by anodic polymerization, has been investigated. Results show that epithelial cells Hep-2 present significant activity on the surface of poly(3,4-ethylenedioxythiophene) electrodeposited on stainless steel electrodes, no sign of cytotoxicity being detected for this conducting polymer. Indeed, seeded and cultured cells bound better to poly(3,4-ethylenedioxythiophene) than to uncoated stainless steel, the latter substrate being used as a control. Furthermore, the electrochemical characteristics of poly(3,4-ethylenedioxythiophene) covered with cells was determined in different biological media using cyclic voltammetry experiments. Results reveal a significant increase in the electroactivity of this material when it is covered with a cellular monolayer. The overall of the results evidences not only the biocompatibility of poly(3,4-ethylenedioxythiophene) with Hep-2 cells but also their electrocompatibility.     

Fabrication of poly(vinyl alcohol)‐graphene quantum dots coated with poly(3,4‐ethylenedioxythiophene) for supercapacitor

Conducting nanofiber composed of poly(vinyl alcohol) (PVA), graphene quantum dots (GQDs) and poly(3,4‐ethylenedioxythiophene) (PEDOT) was prepared for symmetrical supercapacitor through electrospinning and electropolymerization techniques. The formation of PVA nanofibers with the addition of GQDs was excellently prepared with the average diameter of 55.66 ± 27 nm. Field emission scanning electron microscopy images revealed that cauliflower‐like structure of PEDOT was successfully coated on PVA‐GQD electrospun nanofibers. PVA‐GQD/PEDOT nanocomposite exhibited the highest specific capacitance of 291.86 F/g compared with PVA/PEDOT (220.73 F/g) and PEDOT (161.48 F/g). PVA‐GQD/PEDOT also demonstrated a high specific energy and specific power of 16.95 and 984.48 W/kg, respectively, at 2.0 A/g current density. PVA‐GQD/PEDOT exhibited the lowest resistance of charge transfer (R_ct) and equivalent series resistance compared with PEDOT and PVA/PEDOT, indicating that the fast ion diffusion between the electrode and electrolyte interface. PVA‐GQD/PEDOT nanocomposite also showed an excellent stability with retention of 98% after 1000 cycles. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 50–58     

Synthesis and properties of monodisperse multi‐triarylamine‐substituted oligothiophenes and 4,7‐bis(2′‐oligothienyl)‐2,1,3‐benzothiadiazoles for organic solar cell applications

Two novel series of monodisperse multi‐triarylamine‐substituted oligothiophenes, G ₂ ‐ OT ( n )‐ G ₂ with thiophene unit (n) varying from 6 to 8, and 4,7‐bis(2′‐oligothienyl)‐2,1,3‐benzothiadiazoles G ₂ ‐ OT ( n ) BTD ‐ G ₂ (n = 2, 4, 6) have been synthesized by the Suzuki coupling reactions. With an elongation of alkyl‐substituted oligothiophene core or an incorporation of benzothiadiazole into the central core, the absorption and emission spectra of G ₂ ‐ OT ( n )‐ G ₂ and G ₂ ‐ OT ( n ) BTD ‐ G ₂ series red‐shift substantially with the optical gap reducing to 1.95 eV for G ₂ ‐ OT ( 6 ) BTD ‐ G ₂ . Alkyl‐substitution onto oligothiophene backbone not only improves the solubility of the highly extended dendrimers but also renders coplanarity of the dendritic oligothiophene backbone at the excited state, which results in the enhancement of fluorescence quantum efficiency. The bulk heterojunction solar cells using these newly synthesized dendritic oligothiophenes as a donor material and [6,6]‐phenyl C₆₁‐butyric acid methyl ester (PCBM) as an acceptor material were fabricated and investigated which showed an increase in device performance as compared with those of the lower homologues. On increasing the loading of PCBM from 1.5 to 3 times in the active layer, there was also an enhancement in device performance with power conversion efficiencies of as‐fabricated solar cells increasing from 0.18% to 0.32%. In addition, proper annealing procedure could significantly improve the device performance of the dendrimer‐based photovoltaic cell. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 137–148, 2009