离子液体[bmim]Cl-CrCl2促进的Reformatsky反应研究

用无水氯化铬(CrCl2)和氯化1-丁基-3-甲基咪唑([bmim]Cl)制备了离子液体[bmim]Cl-CrCl2, 考察了CrCl2与[bmim]Cl物质的量比以及离子液体与底物物质的量比对Reformatsky反应的影响, 研究了[bmim]Cl-CrCl2促进不同底物发生的Reformatsky反应. 结果表明, 离子液体[bmim]Cl-CrCl2不仅能促进醛、酮与α-溴代酸酯的反应, 以极好的产率得到β-羟基酸酯; 而且能较好地诱导α-溴代苯乙酮与醛、酮的反应, 以较高的产率得到β-羟基酮. 该离子液体经处理后可以重复使用, 是一种Reformatsky反应的绿色化学方法.     

咪唑阴离子型碱性离子液体的合成及其催化Knoevenagel缩合反应

设计合成了由1-丁基-3-甲基咪唑阳离子与咪唑阴离子搭配的[bmim]Im新型碱性离子液体并对其碱性进行研究.[bmim]Im离子液体的碱性与[bmim]OH的碱性接近且强于[bmim]OAc.在水溶液及室温条件下,2%的[bmim]Im离子液体对系列芳香醛与活泼的亚甲基化合物之间的Knoevenagel缩合反应具有较好的催化性能,目标产物的收率达到86%～95%,选择性为100%.同时,该催化剂体系具有良好的循环性能.     

Correlation between quasielastic Raman scattering and configurational entropy in an ionic liquid

Low-frequency (5-200 cm(-1)) Raman spectra are reported for the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate, [bmim]PF(6), in glassy, supercooled liquid, and normal liquid phases (77-330 K). Raman spectra of [bmim]PF(6) agree with previous results obtained by optical Kerr effect spectroscopy and molecular dynamics simulation. Both the superposition model and the coupling model give reasonable fit to low-frequency Raman spectra of [bmim]PF(6). The configurational entropy of [bmim]PF(6) has been evaluated as a function of temperature using recently reported data of heat capacity. The calculated configurational entropy is inserted in the Adam-Gibbs theory for supercooled liquids, giving a good fit to non-Arrhenius behavior of viscosity and diffusive process, with the latter revealed by a recent neutron scattering investigation of [bmim]PF(6). There is a remarkable linear dependence between intensity of quasielastic Raman scattering and configurational entropy from 77 K up to the melting point of [bmim]PF(6). This correlation offers insight into the nature of dynamical processes probed by low-frequency Raman spectra of ionic liquids.     

碱性离子液体[bmim]OH在Knoevenagel反应和Perkin反应中的应用

以碱性离子液体[bmim]OH作为催化剂, 在无溶剂条件下, 催化Knoevenagel反应和Perkin反应两类缩合反应. 实验结果表明, 该离子液体对Knoevenagel反应具有很高的催化活性, 一系列的芳香醛和活泼亚甲基化合物在室温条件下10～30 min内顺利完成反应, 以85%～95%的高产率生成取代烯烃产物. 离子液体经简单处理后能多次循环使用. 此外, 初步探讨了该碱性离子液体在Perkin反应中的应用.     

二醋酸纤维素-离子液体膜固定肌红蛋白制备过氧化氢传感器

将二醋酸纤维素(CDA)-(1-丁基-3-甲基咪唑四氟硼酸盐离子液体)([bmim]BF4)-肌红蛋白(Mb)的复合物修饰在玻碳电极(GCE)表面,制备了一种新型Mb修饰电极(CDA-[bmim]BF4-Mb/GCE).光谱分析表明:固定在CDA- [bmim]BF4-Mb膜中的肌红蛋白保持了其天然构象和生物活性.离子...     

离子液体中β-葡萄糖苷酶生物催化合成红景天甙

比较了聚乙二醇修饰的β-葡萄糖苷酶在三种离子液体([bmim]PF6,[bmim]BF4,[bmim]Tf2N)及两种常用有机溶剂(1,4-二氧六环、正己烷)中的催化性能,确定了适宜的反应介质;考察了底物浓度、温度、体系含水量和反应时间等因素对β-葡萄糖苷酶催化合成红景天甙反应的影响.结果表明,在最佳反应介质[bmim...     

Cu(I)(bpp)]BF4: the first extended coordination network prepared solvothermally in an ionic liquid solvent

Use of an ionic liquid [bmim][BF4] (bmim = 1-butyl-3-methylimidazolium) as solvent has resulted in the first extended coordination structure, the two-dimensional network [Cu(bpp)]BF4 [bpp = 1,3-bis(4-pyridyl)propane], produced via a solvothermal route.     

Room Temperature Ionic Liquid： a Powerful Additive of Mn（Salen） Catalyzed Oxidation of sec-Alcohols

A simple, mild, efficient Mn(salen)-catalyzed oxidation system of secondary alcohols, in which the ionic liquid [bmim]PF6 acts as a powerful additive, has been described. The reaction proceeded with higher efficiency. The catalyst was more easier to recycle in ionic liquid [bmim]PF6 with a well-proportioned CH2Cl2 than in the single CH2Cl2 or ionic liquid.     

Effects of temperature and anion species on CO2 permeability and CO2/N2 separation coefficient through ionic liquid membranes

The permeability of carbon dioxide (CO₂) through imidazolium-based ionic liquid membranes was measured by a sweep gas method. Six species of ionic liquids were studied in this work as follows: [emim][BF₄], [bmim][BF₄], [bmim][PF₆], [bmim][Tf₂N], [bmim][OTf], and [bmim][dca]. The ionic liquids were supported with a polyvinylidene fluoride porous membrane. The measurements were performed at T = (303.15 to 343.15) K. The partial pressure difference between feed and permeate sides was 0.121 MPa. The permeability of the CO₂ increases with temperature for the all ionic liquid species. Base on solution diffusion theory, it can be explained that the diffusion coefficient of CO₂ in an ionic liquid affects the temperature dependence more strongly than the solubility coefficient. The greatest permeability was obtained with the [bmim][Tf₂N] membrane. The membrane of [bmim][PF₆] presents the lowest permeability.The separation coefficient between CO₂ and N₂ through the ionic liquid membranes was also investigated at the volume fraction of CO₂ at feed side 0.10. The separation coefficient decreases with the increase of temperature for the all ionic liquid species. The membrane of [emim][BF₄] and [bmim][BF₄] gives the highest separation coefficient at constant temperature. The lowest separation coefficient was obtained from [bmim][Tf₂N] membrane which presents the highest permeability of CO₂.     

1-Butyl-3-methylimidazolium p-toluenesulfinate: a novel reagent for synthesis of sulfones and β-ketosulfones in ionic liquid

A novel task-specific ionic liquid, 1-butyl-3-methylimidazolium p-toluenesulfinate, [bmim][p-TolSO₂] has been synthesized and used as a nucleophile for the reaction with alkyl bromides and phenacyl bromides to prepare sulfones and β-ketosulfones in excellent yields (80-93%) in [bmim][BF₄] ionic liquid. The isolated yields of sulfones and β-ketosulfones were higher in [bmim][BF₄] than other organic solvents at room temperature.     

Nucleophilicity in ionic liquids. 2.(1) Cation effects on halide nucleophilicity in a series of bis(trifluoromethylsulfonyl)imide ionic liquids

In this work, the nucleophilicities of chloride, bromide, and iodide have been determined in the ionic liquids [bmim][N(Tf)(2)], [bm(2)im][N(Tf)(2)], and [bmpy][N(Tf)(2)] (where bmim = 1-butyl-3-methylimidazolium, bm(2)im = 1-butyl-2,3-dimethylimidazolium, bmpy = 1-butyl-1-methylpyrrolidinium, and N(Tf)(2) = bis(trifluoromethylsulfonyl)imide). It was found that in the [bmim](+) ionic liquid, chloride was the least nucleophilic halide, but that changing the cation of the ionic liquid affected the relative nucleophilicities of the halides. The activation parameters DeltaH(), DeltaS(), and DeltaG() have been estimated for the reaction of chloride in each ionic liquid, and compared to a similar reaction in dichloromethane, where these parameters were found for reaction by both the free ion and the ion pair.     

Amine basicity: measurements of ion pair stability in ionic liquid media

The stability constants relevant to the formation of amine/p-nitrophenol ion pairs have been determined in [bmim][BF₄] solution, in the presence of butylamine, piperidine, and triethylamine, by using spectrophotometric measurements. In order to evaluate how the ion pair stability is affected by ionic liquid structure, piperidine has been chosen as model amine for studies in [bmim][PF₆], [bmim][NTf₂], [bm₂im][NTf₂] and in several [bmim][BF₄]/1,4-dioxane binary mixtures. Data obtained in ionic liquid solutions have been compared with those previously reported in conventional organic solvents.     

离子液体中卤素交换氟化合成七氟醚

在离子液体作为反应介质的条件下,以六氟异丙基氯甲基醚的氟代反应合成了七氟醚。 探讨了氟代反应机理,考察了[bpy]BF4、[bmim]BF4、[bepy]BF4、[bmim]PF6对反应产率的影响,研究了氟化剂、水和温度对反应产率的影响。 结果表明,以[bepy]BF4为反应介质,高比表面积的KF和微量的水有利于固态KF的部分离解进入有机相形成高活性的F-从而减少副产物,收率达到94.6%。 离子液体可重复使用3次以上,其活性没有明显下降。     

Dynamics of solvent and rotational relaxation of coumarin-153 in room-temperature ionic liquid 1-butyl-3-methyl imidazolium tetrafluoroborate confined in poly(oxyethylene glycol) ethers containing micelles

We have investigated solvent and rotational relaxation of coumarin 153 (C-153) in room-temperature ionic liquid (RTILs) 1-butyl-3-methyl-imidazolium tetrafluoroborate ([bmim][BF(4)]) and the ionic liquid confined in alkyl poly(oxyethylene glycol) ethers containing micelles. We have used octaethylene glycol monotetradecyl ether (C(14)E(8)) and octaethylene glycol monododecyl ether (C(12)E(8)) as surfactants. In the [bmim][BF(4)]-C(14)E(8) micelle, we have observed only a 22% increase in solvation time compared to neat [bmim][BF(4)], whereas in the [bmim][BF(4)]-C(12)E(8) system, we have observed approximately 57% increase in average solvation time due to micelle formation. However, the slowing down in solvation time on going from neat RTIL to RTIL-confined micelles is much smaller compared to that on going from water to water confined micellar aggregates. The 22-57% increase in solvation time is attributed to the slowing down of collective motions of cations and anions in micelles. The rotational relaxation times become faster in both the micelles compare to neat [bmim][BF(4)].     

Nano-indentation of a room-temperature ionic liquid film on silica: a computational experiment

We investigate the structure of the [bmim][Tf(2)N]/silica interface by simulating the indentation of a thin (4 nm) [bmim][Tf(2)N] film by a hard nanometric tip. The ionic liquid/silica interface is represented in atomistic detail, while the tip is modelled by a spherical mesoscopic particle interacting via an effective short-range potential. Plots of the normal force (F(z)) on the tip as a function of its distance from the silica surface highlight the effect of weak layering in the ionic liquid structure, as well as the progressive loss of fluidity in approaching the silica surface. The simulation results for F(z) are in near-quantitative agreement with new AFM data measured on the same [bmim][Tf(2)N]/silica interface under comparable thermodynamic conditions.     

高活性离子液体-铑膦络合物体系催化1-己烯氢甲酰化反应

 The hydroformylation of 1-hexene catalyzed by rhodium-TPPTS complexes in the ionic liquid [bmim]BF4 was studied. The activity and selectivity of the rhodium-TPPTS complexes in [bmim]BF4 were much higher than those reported in other ionic liquids. The TOF of 1-hexene and selectivity for aldehyde were 1508 h-1 and 92%, respectively, under the optimum conditions. The high activity of the catalyst is ascribed to the absence of halide ions as well as the much higher solubility of hydrogen and rhodium-TPPTS complexes in [bmim]BF4 than in [bmim]PF6.     

添加中低浓度离子液体[bmim][BF4]对吐温-20临界胶束浓度和胶束结构的影响

添加离子液体会对表面活性剂在水溶液中的聚集行为产生重要影响。本文研究了吐温-20在中低浓度离子液体四氟硼酸1-丁基-3-甲基咪唑鎓([bmim][BF_4])中的胶束化行为。随着[bmim][BF_4]浓度(cIL)从0增加到0.2mol·L~(-1),吐温-20的临界胶束浓度逐渐增大。相比cIL0.05mol·L~(-1),在cIL0.05mol·L~(-1)时加入[bmim][BF_4]使吐温-20临界胶束浓度增大得更加显著。吐温-20胶束聚集数随着离子液体浓度的增加而逐渐减小,这一结果也说明加入离子液体会对吐温-20胶束的生成有抑制作用。吐温-20胶束化热力学研究表明,吐温-20在不同浓度离子液体中的胶束化是熵、焓共同驱动,并具有熵-焓补偿性。随着离子液体浓度的增加,吐温-20胶束平均粒径和胶束微粘性均表现出先增大后减小的变化,在cIL=0.05mol·L~(-1)时达到最大值。     

Nucleophilicity in ionic liquids. 3. Anion effects on halide nucleophilicity in a series of 1-butyl-3-methylimidazolium ionic liquids

We have continued the study of halide nucleophilicity in ionic liquids, concentrating on the effect of changing the anion ([BF(4)](-), [PF(6)](-), [SbF(6)](-), [OTf](-), and [N(Tf)(2)](-)) when the cation is [bmim](+) (where bmim = 1-butyl-3-methylimidazolium). It was found that the nucleophilicities of all the halides were lower in all of the ionic liquids than in dichloromethane. Changing the anion affected the order of halide nucleophilicity, e.g., in [bmim][BF(4)] the order of nucleophilicity was Cl(-)>Br(-)>I(-) while in [bmim][N(Tf)(2)] the order was Cl(-)相似文献   

Ionic Liquid Solvent Based on Cyclic Guanidinium Cation for Nucleophilic Displacement Reactions

The nucleophilic displacement reaction of n-bromooctane and potassium iodide in ionic liquid based on cyclic guanidinium cation(2) was investigated. The kinetic reasuh shows that the rate of the reaction is enhanced in ionic liquid (2). The same reaction in [bmim][PF6] (1)(where bmim=1-butyl-3-methylimidazolium) was also studied. It was found that as a reaction medium ionic liquid (2) is better than (1) for nucelophilic displacement reactions.     

An efficient conjugate hydrothiocyanation of chalcones with a task-specific ionic liquid

A new and efficient method of conjugate hydrothiocyanation of chalcones along with the preparation of a probe for demonstrating the utility of the resulting β-thiocyanato ketones in heterocyclic synthesis is reported. Chalcones undergo an efficient conjugate hydrothiocyanation with the task-specific ionic liquid (TSIL), 1-n-butyl-3-methylimidazolium thiocyanate ([bmim]SCN) followed by reaction with AcONH₄ or an amine to afford chemically and pharmaceutically interesting 2-amino-1,3-thiazines at room temperature in a one-pot procedure. After isolation of the product, the ionic liquid [bmim]OH could be used for the synthesis of [bmim]SCN, thus allowing recycling of the TSIL for further use.