High‐Silica Zeolite SSZ‐61 with Dumbbell‐Shaped Extra‐Large‐Pore Channels

The synthesis of the high‐silica zeolite SSZ‐61 using a particularly bulky polycyclic structure‐directing agent and the subsequent elucidation of its unusual framework structure with extra‐large dumbbell‐shaped pore openings are described. By using information derived from a variety of X‐ray powder diffraction and electron microscopy techniques, the complex framework structure, with 20 Si atoms in the asymmetric unit, could be determined and the full structure refined. The Si atoms at the waist of the dumbbell are only three‐connected and are bonded to terminal O atoms pointing into the channel. Unlike the six previously reported extra‐large‐pore zeolites, SSZ‐61 contains no heteroatoms in the framework and can be calcined easily. This, coupled with the possibility of inserting a catalytically active center in the channel between the terminal O atoms in place of H⁺, afford SSZ‐61 intriguing potential for catalytic applications.     

Analysis of dammar resin with MALDI‐FT‐ICR‐MS and APCI‐FT‐ICR‐MS

Comprehensive analysis of high‐resolution mass spectra of aged natural dammar resin obtained with Fourier transform ion cyclotron resonance mass spectrometer (FT‐ICR‐MS) using matrix‐assisted laser desorption/ionization (MALDI) and atmospheric pressure chemical ionization (APCI) is presented. Dammar resin is one of the most important components of painting varnishes. Dammar resin is a terpenoid resin (dominated by triterpenoids) with intrinsically very complex composition. This complexity further increases with aging. Ten different solvents and two‐component solvent mixtures were tested for sample preparation. The most suitable solvent mixtures for the MALDI‐FT‐ICR‐MS analysis were dichloromethane‐acetone and dichloromethane‐ethanol. The obtained MALDI‐FTMS mass spectrum contains nine clusters of peaks in the m/z range of 420–2200, and the obtained APCI‐FTMS mass spectrum contains three clusters of peaks in the m/z range of 380–910. The peaks in the clusters correspond to the oxygenated derivatives of terpenoids differing by the number of C₁₅H₂₄ units. The clusters, in turn, are composed of subclusters differing by the number of oxygen atoms in the molecules. Thorough analysis and identification of the components (or groups of components) by their accurate m/z ratios was carried out, and molecular formulas (elemental compositions) of all major peaks in the MALDI‐FTMS and APCI‐FTMS spectra were identified (and groups of possible isomeric compounds were proposed). In the MALDI‐FTMS and APCI‐FTMS mass spectrum, besides the oxidized C₃₀, triterpenoids also peaks corresponding to C₂₉ and C₃₁ derivatives of triterpenoids (demethylated and methylated, correspondingly) were detected. MALDI and APCI are complementary ionization sources for the analysis of natural dammar resin. In the MALDI source, preferably polar (extensively oxidized) components of the resin are ionized (mostly as Na⁺ adducts), whereas in the APCI source, preferably nonpolar (hydrocarbon and slightly oxidized) compounds are ionized (by protonation). Either of the two ionization methods, when used alone, gives an incomplete picture of the dammar resin composition. Copyright © 2012 John Wiley & Sons, Ltd.     

Particle‐in‐a‐Frame Nanostructures with Interior Nanogaps

Designing plasmonic hollow colloids with small interior nanogaps would allow structural properties to be exploited that are normally linked to an ensemble of particles but within a single nanoparticle. Now, a synthetic approach for constructing a new class of frame nanostructures is presented. Fine control over the galvanic replacement reaction of Ag nanoprisms with Au precursors gave unprecedented Au particle‐in‐a‐frame nanostructures with well‐defined sub‐2 nm interior nanogaps. The prepared nanostructures exhibited superior performance in applications, such as plasmonic sensing and surface‐enhanced Raman scattering, over their solid nanostructure and nanoframe counterparts. This highlights the benefit of their interior hot spots, which can highly promote and maximize the electric field confinement within a single nanostructure.     

N‐Boc‐Protected 1,2‐Diphenylethylenediamine‐Based Dendritic Organogels with Multiple‐Stimulus‐Responsive Properties

A new class of poly(benzyl ether) dendrimers, decorated in their cores with N‐Boc‐protected 1,2‐diphenylethylenediamine groups, were synthesized and fully characterized. It was found that the gelation capability of these dendrimers was highly dependent on dendrimer generation, and the second‐generation dendrimer (R,R)‐G₂DPENBoc proved to be a highly efficient organogelator. A number of experiments (SEM, TEM, FTIR spectroscopy, ¹H NMR spectroscopy, rheological measurements, UV/Vis absorption spectroscopy, CD, and XRD) revealed that these dendritic molecules self‐assembled into elastically interpenetrating one‐dimensional nanostructures in organogels. The hydrogen bonding, π–π, and solvophobic interactions were found to be the main driving forces for formation of the gels. Most interestingly, these dendritic organogels exhibited smart multiple‐stimulus‐responsive behavior upon exposure to environmental stimuli such as temperature, anions, and mechanical stress.     

Polyisobutylene‐based polyurethanes. VIII. Polyurethanes with ‐O‐S‐PIB‐S‐O‐ soft segments

We describe the synthesis, characterization, and select properties of a novel polyurethane (PU) prepared using a new polyisobutylene diol, HO‐CH₂CH₂‐S‐PIB‐S‐CH₂CH₂‐OH, soft segment and conventional hard segments. The diol is synthesized by terminal functionalization of ally‐telechelic PIB followed by low‐cost thiol‐ene click chemistry. Properties of ‐S‐ containing PU (PIB_S‐PU) containing 72.5% PIB were investigated and compared to similar PUs made with HO‐PIB‐OH (PIB_O‐PU). Hydrolytic resistance was studied by contact with phosphate‐buffered saline, oxidative resistance by immersing in concentrated HNO₃, and metal ion oxidation resistance by exposure to CoCl₂/H₂O₂. Hydrolytic and oxidative resistances of PIB_S‐PU and PIB_O‐PU are similar and superior to a commercial PDMS‐based PU, Elast‐Eon? E2A. According to ¹H NMR spectroscopy the ‐S‐ in PIB_S‐PUs remained unchanged upon treatment with HNO₃, however, oxidized mainly to ‐SO₂‐ by CoCl₂/H₂O_2. Static mechanical properties of PIB_S‐PU and PIB_O‐PU are similar, except creep resistance of PIB_S‐PU is surprisingly superior. The thermal stability of PIB_S‐PUs is ～15 °C higher than that of PIB_O‐PU. FTIR spectroscopy indicates H bonded S atoms (N‐H…S) between soft and hard segments, which noticeably affect properties. DSC and XRD studies suggest random low‐periodicity crystals dispersed within a soft matrix. Energy dispersive X‐ray spectroscopy–scanning electron microscopy indicates homogeneous distribution of S atoms on PIB_S‐PU surfaces. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1119–1131     

New reactions of N‐T‐butyl‐N‐benzoylhydrazine with triphosgene

N‐tert‐Butyl‐N‐benzoylhydrazine was prepared in a new and convenient procedure with good yield. Triphosgene underwent reaction with three equivalents of N‐t‐butyl‐N‐benzoylhydrazine using six equivalents of triethylamine as a base to yield the cyclic tetramer of N‐t‐butyl‐N‐isocyanatobenzoylamide. Treatment of triphosgene with three equivalents of N‐t‐butyl‐N‐benzoylhydrazine either in the presence of three equivalents of triethylamine or in the absence of triethylamine afforded the cyclic pentamer of iso‐cyanate, from which tert‐butyl is eliminated.     

Further Studies with Ethyl 5‐Amino‐3‐phenyl‐lH‐pyrazole‐4‐carboxylate1

The newly synthesized ethyl 3‐amino‐5‐phenylpyrazole‐4‐carboxylate 1 was diazotized and coupled with β‐naphthol, active methylene reagents 6 , 9 , 12 , 15 , and the active methine 19 to afford the pyrazolo[5,1‐c]triazines 5 , 8 , 11 , 14 , 17 , 18 , and the pyrazolo[5,1‐ c ]‐1,2,4‐triazoles 21 , 22 , and 23 , respectively. Structures are elucidated and mechanisms are discussed.     

Reactions of 2‐amino‐4h‐1‐benzopyran‐4‐one with 4‐oxo‐4h‐1‐benzopyran‐3‐carbaldehydes

The title aldehyde 1 reacts smoothly with the enamine moiety of 2 ‐aminochromone 2 to produce hitherto unreported 3‐(2‐hydroxybenzoyl)‐5H‐1‐benzopyrano[2,3‐b]pyridin‐5‐one (azaxanthone) 5 . This reaction has been extended for the synthesis of bisazaxanthone 9.     

Transition‐metal‐catalyzed reactions of 5‐methylene‐2‐oxazolidinone and 5‐methylene‐1,3‐thiazolidine‐2‐thione with isocyanates

5‐Methylene‐2‐oxazolidinone (1) and 5‐methylene‐1,3‐thiazolidine‐2‐thione (4) react with various isocyanates to give the corresponding urethanes 3 and 5 in high yields in the presence of palladium(0) or palladium(II) catalyst under mild reaction conditions. A mechanism is proposed. Copyright © 2003 John Wiley & Sons, Ltd.     

Toughening of nylon‐6 with epoxy‐functionalized acrylonitrile‐butadiene‐styrene copolymer

Glycidyl methacrylate (GMA) functionalized acrylonitrile‐butadiene‐styrene (ABS) copolymers have been prepared via an emulsion polymerization process. The epoxy‐functionalized ABS (e‐ABS) particles were used to toughen nylon‐6. Molau tests and FTIR results showed the reactions between nylon‐6 and e‐ABS have taken place. Scanning electron microscopy (SEM) displayed the compatibilization reaction between epoxy groups of e‐ABS and nylon‐6 chain ends (amine or carboxyl groups), which improve disperse morphology of e‐ABS in the nylon‐6 matrix. The presence of only a small amount of GMA (1 wt %) within the e‐ABS copolymer was sufficient to induce a pronounced improvement of the impact strength of nylon‐6 blends; whereas further increase of the GMA contents in e‐ABS resulted in lower impact strength because of the crosslinking reaction between nylon‐6 and e‐ABS, resulting in agglomeration of the ABS particles. SEM results showed shear yielding of the nylon‐6 matrix and cavitation of rubber particles were the major toughening mechanisms. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2170–2180, 2005     

Synthesis and NMR‐Spectroscopic Investigations with 4‐Chloroacyl‐1‐phenylpyrazolin‐5‐ones

The synthesis of various 4‐acylpyrazolones bearing in the acyl moiety either a terminal chloro‐substituent or a terminal ortho‐chlorophenyl group was achieved by reaction of 3‐methyl‐1‐phenyl‐2‐pyrazolin‐5‐one (tautomer to 3‐methyl‐1‐phenyl‐1H‐pyrazol‐5‐ol) with the corresponding acid chloride using calcium hydroxide / 1,4‐dioxane. In one case (reaction with chlorobutanoyl chloride) a spontaneous cyclization occurred leading to the corresponding oxepino[2,3‐c]pyrazole. Detailed NMR spectroscopic investigations with all prepared compounds were performed.