Calibration of PM-355 nuclear track detectors; comparison of track diameter diagrams with track depth characteristics

The calibration diagrams, i.e. track diameters and track depths versus ion energy and etching time, as obtained for PM-355 track detector irradiated with He-ions are presented. The both detector characteristics are compared. The track etch rate is determined by two methods, as a function of the etch pit depth and the ion energy loss.     

Investigation of response of CR-39, PM-355 and PM-500 types of nuclear track detectors to energetic carbon ions

Samples of CR-39, PM-355, and PM-500 plastic detectors were irradiated with carbon ions of energy ranging from 0.9 MeV to 14.7 MeV. After the irradiation the detector samples were etched for a period from 2 hrs to 10 hrs. Dependence of track diameters on the ion energy values for different etching times, and dependence of V_T/V_B as a function of incident carbon-ion energy, are presented.     

Advantage of PM-355 nuclear track detector in light-ion registration and high-temperature plasma diagnostics

Detailed calibration studies of selected types of SSNTDs have been performed at the SINS using monoenergetic light ions of energy within MeV range. These studies were motivated by the application of such detectors in the optimal way for plasma physics experiments. This paper shows track diameter evolutions versus particle energy and etching time. Some conclusions related to track registration phenomenon and detection properties of the investigated detectors, especially of the PM-355 type are also presented.     

Influence of intensive γ and electron radiation on tracks formation in the PM-355 detectors

Solid-state nuclear track detectors have found wide use in various domains of science and technology, e.g. in plasma experiments. The track detectors used in the fusion-oriented experiments encounter “harsh” conditions (intense X-ray and neutron radiation, heat impact, shock waves and plasma fluxes). Therefore, such detectors should be tested under similar conditions. This paper concerns influence of electron and γ radiation on the track formation in PM-355 detectors. Samples were irradiated with 1.5-MeV protons and ⁴He-ions, and with 5.5 MeV particles. After that they were exposed to γ and electron radiation. Irradiation doses were varied from 100 kGy up to 2000 kGy. The etching was performed in steps, and a bulk etching rate (V_B) was determined versus an absorbed dose of electron and gamma radiation.     

Comparison of responses of LR-115A, CR-39 and PM-355 track detectors to pulsed low-energy proton streams

The paper concerns applications of LR-115A, CR-39 and PM-355 solid-state nuclear-track detectors (SSNTDs) for investigation of pulsed fluxes of protons below 300 keV. The proton streams were generated by the RPI-IBIS device operated with hydrogen puffing [Baranowski et al. 2000. Studies of hydrogen discharges in RPI-type devices with different electrode configurations. Czech. J. Phys. 50 (Suppl. S3), 101–107]. To perform ion mass- and energy-analysis, a Thomson mass-spectrometer equipped with a special input system and exchangeable detectors was used. A quantitative analysis of proton tracks upon Thomson parabolas was performed by means of an optical microscope equipped with a CCD camera. It made possible to measure proton tracks and to determine their statistics. The paper presents proton energy spectra recorded with the selected detectors, and responses of these detectors to protons of energy from about 30 to 300 keV. The results are important for verification of detector characteristics and for measurements of protons at different experimental conditions.     

Comparison of responses of CR-39, PM-355, and CN track detectors to energetic hydrogen-, helium-, nitrogen-, and oxygen-ions

Samples made of the CR-39 and PM-355 plastic nuclear track detectors (NTDs) as well as of the CN films were irradiated with quasi-monoenergetic beams of protons, alphas, N⁺-, and O⁺-ions produced by various accelerators. For different samples an energy value of the particle beams was changed from several hundreds keV to 3 or 4.5 MeV. After irradiation the detector samples were etched chemically under controlled conditions during periods lasting from 2 hrs to 20 hrs. Every 2 hrs track diameters were measured by means of an optical microscope. Differences in the crater diameters in the detectors etched in steps, and those etched continously, have been found to be smaller than 10 percent. The paper results detailed calibration diagrams showing a dependence of track diameters on the ion energy value for different etching times.     

用20—1020 keV单能质子刻度CR-39固体核径迹探测器

用北京师范大学2×1.7MV串列加速器和400 kV高压倍加器产生的20—1020 keV单能质子束对CR-39固体核径迹探测器进行了刻度.为了保证质子的单能性和固体核径迹探测器上径迹密度不能超过10⁶/cm²的要求,对两台加速器分别采用了不同方法控制质子辐照数量.在串列加速器上采用了狭缝加转盘的方法,在高压倍加器上采用了100 ns单次高压脉冲扫描束流的方法,既保持了质子的单色性,又达到了质子注量小于10⁶/cm²的 关键词： 单能质子 固体核径迹探测器 CR-39     

Comparison of responses of CR-39 and PM-355 track detectors to fast protons, deuterons and He ions within energy range 0.2–4.5 MeV

The paper presents new results of the calibration of the standard CR-39 and super-grade PM-355 plastic detectors, which are applicable for the registration of the protons, deuterons, and ⁴He-ions. The calibration diagram show track diameters vs particle energy for different etching times.     

Application of CR-39 track detectors for corpuscular diagnostics of high-temperature plasmas

Solid State Nuclear Track Detectors (SSNTDs) have been used for corpuscular diagnostic in numerous high-temperature plasma experiments. This paper presents different applications of the detectors mentioned above, particularly in nuclear fusion investigations. Some new projects and proposals of the use of such detectors in large-scale plasma experiments, e.g. tokamaks, and laser-fusion facilities are demonstrated. To use the SSNTDs in the optimal way and to determine their detection characteristics, detailed calibration studies of the selected plastic detectors (CR-39, PM-355, PM-500, PM-600) have been performed at IPJ for several years. To carry out calibration measurements of these detectors, ion beams from different accelerators were applied. The paper presents detection characteristics, i.e. track dimensions as a function of ion energy, atomic number and etching time.     

Comparative analysis of CR-39 sensitivity for different sets of measurable track parameters

In the present paper the sensitivity V of plastic nuclear track detectors CR-39 to the space radiation, accelerated heavy ions in wide LET range and α-particles is studied. Different approaches for V evaluation are considered and compared. Main attention is given to the method that is appropriate for the measurement of short range heavy secondaries of space radiation. Finally, the experimental verification of the designed V function is carried out via simulation of the secondaries with low energy α-particles in the vicinity of the Bragg peak.     

Calculations of track parameters and plots of track openings and wall profiles in CR39 detector

Computer programs have been developed to calculate track parameters and to plot track openings and wall profiles. The programs are based on equations derived for three-dimensional consideration of track development. All possible cases of track openings and wall profiles are obtainable from these equations. Results are given for lengths of major and minor axes, track depths and surface areas of track openings. Some examples of track openings and wall profiles are also presented.     

Low-energy ion measurements by means of CR-39 nuclear track detectors

The paper presents an additional acceleration system, used to shift up an ion energy spectrum by 20 keV, and some examples of the ion parabolas registered by means of a Thomson-type spectrometer within the rod plasma injector (RPI-60) facility, designed for plasma physics and application studies. The use of the described acceleration system and CR-39 track detectors has enabled the registration of ions of energy above 20 keV to be performed. It made possible to measure the ion (e.g. deuteron) energy spectrum more exactly in the low-energy range, what is important for the determination of ion emission characteristics.     

Studies on the nuclear tracks in CR-39 plastics

A review was given for our recent studies on the latent tracks in CR-39 nuclear track detector. The radial size of track core has been determined through UV spectral measurements combined to the model of track overlapping and by AFM observations of slightly etched detectors. The track core radius was found to be about a few nano-meters and almost proportional to the cubic root of stopping power. As a control study, the etching properties of CR-39, irradiated by low-LET radiation, has been examined. The observed depth dependence and dose-rate dependence of the bulk etch rate of the irradiated CR-39 were explained that the damage formation process was governed by the reaction between the radiation induced radicals and the oxygen supplied from the air. This indicated that latent tracks in CR-39 are produced through local radiation induced oxidation process along the ion paths. Studies on vibration spectra, near-IR, FT-IR and Raman spectra, of CR-39 have also been carried out to estimate the chemical structure of the latent tracks. The creation of OH group in irradiated CR-39 has been confirmed.     

Supervised nuclear track detection of CR-39 detectors by cellular automata

In this paper, cellular automata are used to detect the nuclear tracks in the track images captured from the surface of CR-39 detectors. Parameters of the automaton as the states, neighborhood, rules and quality parameters are defined optimally for the track image data set under analysis. The presented method is a supervised computational algorithm which comprises a rule definition phase as the learning procedure. Parameter optimization is also performed to adapt the algorithm to the data set used.     

Measurement of target fragments produced by 160 MeV proton beam in aluminum and polyethylene with CR-39 plastic nuclear track detectors

Production of target fragments from reactions of 160 MeV proton beams in aluminum and polyethylene was measured with CR-39 plastic nuclear track detectors (PNTD). Due to the detection limit of PNTD, primary protons cannot be detected; only low-energy short-range target fragments are registered. As a feasibility study, a so called “two step etching method” was employed to get the linear energy transfer (LET) spectra, absorbed dose, and dose equivalent. This method is discussed in this paper, together with the measured results.     

Changes induced in structure and optical properties of PM-355 nuclear track detector due to laser irradiation

PM-355 is a class of polymeric solid-state nuclear track detectors which has a lot of applications in several radiation detection fields. Samples from sheets of PM-355 have been exposed to infrared (IR) laser fluences ranging from 1 to 12.8?J/cm². The effect of IR laser radiation on the structural properties of PM-355 has been investigated using X-ray diffraction and Fourier transform infrared spectroscopy. The results indicate that the samples exhibit chain scission under the effect of laser irradiation up to 4.2?J/cm², thus producing free radicals that led to the formation of new bonds started and continued until 12.8?J/cm². This reduces the ordering structure, giving the PM-355 polymer more resilience. In addition, the laser irradiation at the fluence range 4.2–12.8?J/cm² led to a more compact structure of PM-355, which resulted in an improvement in its isotropic nature with an increase in Vickers hardness and refractive index. Further, the color changes due to laser irradiation were computed using the transmission data in the wavelength range of 370–780?nm. It is found that the color intensity, which is the color difference between the irradiated samples and the non-irradiated one, increases with increasing the laser fluence, largely depending on the proportions of the blue color component.     

Effects of radiations on the characteristics of alpha and fission tracks in CR-39 detectors

Abstract

The effects of neutron, gamma and alpha radiations on the alpha and fission fragment tracks registration and revelation properties of CR-39 detectors (CR-39 and CR-39(DOP) were studied. It was found that the ratio of the bulk etch rate of irradiated to unirradiated (V_G(irr.)/V_G(unirr.) detectors is linearly dependent on dose. An exponential decrease in fission track densities with increase in neutron fluence was observed. The ratio of V_G(irr.)/V_G(unirr.) was found to be high in CR-39 than that in CR-39(DOP) exposed to the same reactor neutron fluence. The decrease in fission track densities with increase in neutron fluence was observed to be faster in CR-39 than in CR-39(DOP). This indicates that doping with dioctyl phthalate improves the radiation resistance of CR-39 detectors. It was observed that in detectors exposed to an alpha flux of the order of 9.36 × 10⁶ / cm², the fission track density was reduced by 11% and thereafter it remained constant. The results also indicate that thermal neutron fluence up to 7.01 ×10¹¹ neutrons/cm² does not affect the alpha and fission track densities. I.R. spectra were also studied to find out the nature of chemical changes produced by these radiations on CR-39.     

Use of CR-39 solid state nuclear track detector in neutron personnel monitoring

Neutron sources like ²⁴¹Am–Be, ²³⁹Pu–Be, ²⁵²Cf and 14.6 MeV neutron generator are being used in oil exploration industries as well as in research institutions. While handling these neutron sources, personnel may be exposed to neutrons. Also personnel working in reactors, accelerators may receive dose from neutrons. These exposed individuals need to be monitored regularly for measurement of neutron doses. The individual neutron doses can be estimated by using Kodak NTA films and CR-39 Solid State Nuclear Track Detector with a polyethylene radiator to increase sensitivity in front in holder. Nearly 1450 personnel are being monitored regularly throughout the country on a quarterly basis. In India, the monitoring system adopted for individual neutron dose estimation having energy from 100 keV and above is described in this paper. Background counts of 0.20 mSv could be measured with CR-39 SSNTD foil system and it has been successfully introduced for Fast Neutron Personnel Monitoring for the country.     

Annealing of 54 132 Xe-ion tracks in Lexan and Makrofol plastic track detectors

Samples of Lexan and Makrofol-E polycarbonate plastic track detectors were exposed to 1·1 MeV/N ₅₄ ¹³² Xe-ions to investigate the thermal track fading properties of these plastics. The experimental results show that there is no effect of annealing on the bulk etch rate while the track etch rate decreases with annealing. The track diameter decreases with increase in annealing time and temperature. It is also observed that the track density is reduced as a result of annealing. The experiments reveal that the track lengths are, in general, decreased by the application of heat and that the oblique tracks are less stable than the vertical tracks. The decrease in diameter of ₅₄ ¹³² Xe-ion tracks in Makrofol-E due to heat treatment is faster than that of ₅₄ ¹³² Xe-ion tracks in Lexan.