Ultrasonic extraction of steroidal alkaloids from potato peel waste

Potato processors produce large volumes of waste in the form of potato peel which is either discarded or sold at a low price. Potato peel waste is a potential source of steroidal alkaloids which are biologically active secondary metabolites which could serve as precursors to agents with apoptotic, chemopreventive and anti-inflammatory properties. The present study investigated the relative efficacy of ultrasound assisted extraction (UAE) and solid liquid extraction (SLE) both using methanol, to extract steroidal alkaloids from potato peel waste and identified optimal conditions for UAE of α-solanine, α-chaconine, solanidine and demissidine. Using response surface methodology optimal UAE conditions were identified as an amplitude of 61 μm and an extraction time of 17 min which resulted the recovery of 1102 μg steroidal alkaloids/g dried potato peel (DPP). In contrast, SLE yielded 710.51 glycoalkaloid μg/g DPP. Recoveries of individual glycoalkoids using UAE yielded 273, 542.7, 231 and 55.3 μg/g DPP for α-solanine, α-chaconine, solanidine and demissidine respectively. Whereas for SLE yields were 180.3, 337.6, 160.2 and 32.4 μg/g DPP for α-solanine, α-chaconine, solanidine and demissidine respectively. The predicted values from the developed second order quadratic polynomial equation were in close agreement with the experimental values with low average mean deviation (E < 5%) values. Predicted models were highly significant (p < 0.05) for all parameters studied. This study indicates that UAE has strong potential as an extraction method for steroidal alkaloids from potato peel waste.     

Optimization of ultrasonic cell grinder extraction of anthocyanins from blueberry using response surface methodology

Ultrasonic cell grinder extraction (UCGE), using water as the solvent, was firstly applied to extract anthocyanins from blueberry. Extraction yield was related with four variables, including ratio of solution to solid, extraction power, buffer time, and extraction time. On the basis of response surface methodology (RSM), the optimal conditions were determined to be the ratio of solution to solid as 25:1 (mL/g), the extraction power as 1500 W, the buffer time as 3.0 s, and the extraction time as 40 min. The experimental yield of anthocyanins using UCGE was 2.89 mg/g higher than that of conventional ultrasound-assisted extraction (CUAE). This study indicated that UCGE was an innovative, efficient, and environment friendly method in ultrasonic extraction fields, and had a potential to effectively extract other bioactive constituents.     

Optimization of ultrasonic-assisted ultrafiltration process for removing bacterial endotoxin from diammonium glycyrrhizinate using response surface methodology

Ultrasonic-assisted ultrafiltration (UAU) removing bacterial endotoxin from diammonium glycyrrhizinate, was firstly applied to surfactant separation. Separation efficiency was related with four variables, including ultrafiltration molecular weight cut off (MWCO), ultrasonic power, concentration and pH. The SCQ-9200E ultrasonic system was provided for the study with adjustable ultrasonic power 80 W to 800 W, and the ultrasonic frequency was 40 KHz. On the basis of response surface methodology (RSM), the optimal separation conditions were determined to be the ultrafiltration MWCO as 10 kDa, the ultrasonic power as 570 W, diammonium glycyrrhizinate concentration as 150.00 μg/mL and the pH as 4.70. The experimental rejection of bacterial endotoxin was 94.08%, meanwhile the transmittance of diammonium glycyrrhizinate was 93.65%. Based on the ultrasonic power, solution volume, and ultrasonic container size, the experiments with UAU at different power intensities showed that ultrasonic at a power intensity of 57 W/L and the power density of 0.32 W/cm² could solve the separation contradiction between diammonium glycyrrhizinate and bacterial endotoxin. This study indicated that UAU could be an innovation in ultrasonic separation fields, and had a vast range of prospects for making use in pharmaceutical preparation area.     

微波萃取-分光光度法研究关黄柏中小檗碱的提取

微波萃取是利用微波能来提高萃取率的-种新技术,用正交法优化微波萃取条件,与传统的酸碱法浸提小檗碱进行了对比研究,确定了微波萃取技术用于中药关黄柏中提取小檗碱的工艺条件.结果表明,使用微波萃取的优化条件为:80℃萃取温度,固液比为1:15,时间1.5min,传统溶剂法:萃取温度70℃,固液比为1:20,时间24h,与稀硫酸浸泡提取法相比,微波萃取工艺提取时间大大缩短,产量可提高30%,工艺操作简便、省时、节能,易于控制.     

Novel modified ultrasonication technique for the extraction of lycopene from tomatoes

Lycopene extraction was carried out via the ultrasonic assisted extraction (UAE) with response surface methodology (RSM). Sonication enhanced the efficiency of relative lycopene yield (enhancement of 26% extraction yield of lycopene in 6 replications at 40.0 min, 40.0 °C and 70.0% v/w in the presence of ultrasound), lowered the extraction temperature and shortened the total extraction time. The extraction was applied with the addition of oxygen-free nitrogen flow and change of water route during water bath sonication. The highest relative yield of lycopene obtained was 100% at 45.0 °C with total extraction time of 50.0 min (30:10:10) and ratio of solvent to freeze-dried tomato sample (v/w) of 80.0:1. Optimisation of the lycopene extraction had been performed, giving the average relative lycopene yield of 99% at 45.6 min, 47.6 °C and ratio of solvent to freeze-dried tomato sample (v/w) of 74.4:1. From the optimised model, the average yield of all-trans lycopene obtained was 5.11 ± 0.27 mg/g dry weight. The all-trans lycopene obtained from the high-performance liquid chromatography (HPLC) chromatograms was 96.81 ± 0.81% with 3.19 ± 0.81% of cis-lycopenes. The purity of total-lycopene obtained was 98.27 ± 0.52% with β-carotene constituted 1.73 ± 0.52% of the extract. The current improved, UAE of lycopene from tomatoes with the aid of RSM also enhanced the extraction yield of trans-lycopene by 75.93% compared to optimised conventional method of extraction. Hence, the current, improved UAE of lycopene promotes the extraction yield of lycopene and at the same time, minimises the degradation and isomerisation of lycopene.     

Artificial neural network model- and response surface methodology-based optimization of Atractylodis Macrocephalae Rhizoma polysaccharide extraction,kinetic modelling and structural characterization

Atractylodis Macrocephalae Rhizoma (AMR) is the dried rhizome of Atractylodes macrocephala Koidz, which is widely used in the development of health products. AMR contains a large number of polysaccharides, but at present there are fewer applications for these polysaccharides. In this study, the effects of different extraction methods on the Atractylodis Macrocephalae Rhizoma polysaccharide (AMRP) yield were investigated, and the conditions for ultrasound-assisted extraction were optimized by response surface methodology (RSM) and three neural network models (BP neural network, GA-BP neural network and ACO-GA-BP neural network). The best conditions were a liquid-to-solid ratio of 17 mL/g, ultrasonic power of 400 W, extraction temperature of 72 °C, and extraction time of 40 min, which yielded 31.31% AMRP. The kinetic equation of AMRP was determined and compared with the results predicted by three neural network models. It was finally determined that the extraction conditions, kinetic processes and kinetic equation predicted by the GA-ACO-BP neural network were optimal. In addition, AMRP was characterized using SEM, FTIR, HPLC, UV, XRD, and NMR, and the structural study revealed that AMRP has a rough exterior and a porous interior; moreover, it contains high levels of glucose (5.07%), arabinose (0.80%), and galactose (0.74%). AMRP has three crystal structures, consisting of two β-type monosaccharides and one α-type monosaccharide. Additionally, the effectiveness of AMRP as an antioxidant was demonstrated in an in vitro experiment.     

Ultrasound-homogenization-assisted extraction of polyphenols from coconut mesocarp: Optimization study

Coconut pericarp (shell fiber (mesocarp) and shell (endocarp)), the main by-product of coconut production, is often discarded and causing serious environmental pollution. To make better use of coconut pericarp, the extraction process of polyphenols from coconut mesocarp (CM) carefully studied by screening seven solvent systems, optimizing the assisted ultrasonic process by response surface methodology, and comparing the four processes of Ultrasound-Assisted Extraction (UAE), Homogenization-Assisted Extraction (HAE), Homogenization-Ultrasound-Assisted Extraction (HUAE), and Ultrasound-Homogenization-Assisted Extraction (UHAE). The UAE and HAE are considered to be the main methods for efficient extraction of natural active ingredients. The former effectively destroys the cell wall structure and promotes the intermolecular diffusion based on the cavitation, thermal and mechanical effect of ultrasonic, while the latter breaks the material based on strong shear force between the rotor and stator. Their combinations (HUAE and UHAE) enhance the damage to the cell wall of raw materials and improve the extraction efficiency by the synergistic effect. The results showed that using 60% acetone (V : V) as extraction solvent, solid-liquid ratio of 1:5 g mL⁻¹, ultrasonic temperature of 80 ℃, ultrasonic time of 80 min, ultrasonic power of 225 W, and then homogenizing at 10,000 rpm for 10 min, the total flavonoid content of CM reached the maximum value of 551.99 ± 12.69 mg Rutin g⁻¹ dry weight (dw), while the total phenolic content reached the maximum value of 289.48 ± 4.41 mg GAE g⁻¹ dw at 10,000 rpm for 5 min, which may be related to the oxidative degradation of polyphenols caused by the increase of polyphenol oxidase with the extension of homogenization time. This study provides a technical guarantee for the further utilization of phenolic substances in CM.     

Ultrasound-assisted extraction of xyloglucan from apple pomace

Ultrasound-assisted extraction was evaluated as a simpler and more effective alternative to conventional extraction method for the isolation of xyloglucan from apple pomace. The apple pomace samples were extracted under indirect sonication in an ultrasound cleaning bath. The ultrasound extraction was compared with the conventional method, on the productions of xyloglucan. It was found that the ultrasound-assisted extraction of xyloglucan was about three times faster than the traditional extraction method. Response surface methodology was employed to study the effect of liquid:solid ratio, KOH concentration and ultrasound-assisted extraction time on the yield of xyloglucan from apple pomace. Regression analysis was performed on the data obtained. The most relevant variable was the quadratic of liquid:solid ratio. The coefficient determination (R²) was good for the second-order model. The optimum combination was determined as a liquid:solid ratio of 34.4:1 (v/w), a KOH concentration of 3.3 M and an ultrasound-assisted extraction time of 2.5 h.     

Ultrasonic-microwave-assisted extraction for enhancing antioxidant activity of Dictyophora indusiata polysaccharides: The difference mechanisms between single and combined assisted extraction

The purpose of this study is to investigate the effects of different extraction methods (hot water-assisted extraction (HWE), microwave-assisted extraction (MAE), ultrasonic-assisted extraction (UAE), and ultrasonic-microwave- assisted extraction (UAME)) on the yield, chemical structures and antioxidant activity of Dictyophora indusiata polysaccharides (DPs). The research results showed that UMAE treatment had greater degree of damage to the cell wall of DPs and better comprehensive antioxidant capacity. Different extraction methods had no obvious effect on the types of glycosidic bonds and sugar rings, similar chemical composition and monosaccharide composition, with different absolute molecular weight (Mw) and molecular conformation. In particular, DPs for UMAE method had the highest polysaccharides yield, which was related to the conformational stretching and degradation avoidance of DPs in the higher molecular weight components under the simultaneous action of microwave and ultrasonic. These findings suggest that the UMAE technology has good potential for modification and application of DPs in the functional food industry.     

Comparison between the use of polyether ether ketone and stainless steel columns for ultrasonic-assisted extraction under various ultrasonic conditions

The ultrasound-assisted extraction (UAE) was conducted using the stainless steel (SS) and polyether ether ketone (PEEK) columns and analyzed with high-performance liquid chromatography (HPLC) to understand the mechanism of ultrasound-assisted chromatography (UAC). Empty SS and PEEK columns were used to extract dyes from a fabric under identical conditions with several parameters including the initial ultrasonic bath temperatures (30 °C and 40 °C), ultrasound power intensities (0, 20, 40, 60, 80, and 100 %), ultrasound operation modes (normal and sweep), and ultrasound frequencies (25 kHz, 40 kHz, and 132 kHz) to compare their extraction capabilities. After 30 min of extraction, the amount of extract was determined by HPLC. The PEEK material was significantly affected by ultrasonic radiation compared to the SS material, especially at a higher temperature (40 °C), power intensity (100 %), and frequency (132 kHz) with sweep mode. At a maximum power density of 45 W/L, the extraction effectiveness ratio of PEEK to SS was in the range of 1.8 - 3.9 depending on the specific frequency, initial temperature, and with or without temperature control. The most optimal ultrasound frequencies, in terms of enhancing extraction effectiveness, are in the order of 132 kHz, 40 kHz, and 25 kHz. Unlike the SS material, the PEEK material was more affected by temperature and acoustic effects under identical conditions, especially at 132 kHz ultrasound frequency. In contrast, at lower frequencies of 40 kHz and 25 kHz, no significant differences in the acoustic effects were observed between the PEEK and SS materials. The findings of this study contribute to elucidating the roles of column materials in UAE and UAC.     

Ultrasonic vibration-assisted pelleting of wheat straw: A predictive model for energy consumption using response surface methodology

Cellulosic biomass can be used as a feedstock for biofuel manufacturing. Pelleting of cellulosic biomass can increase its bulk density and thus improve its storability and reduce the feedstock transportation costs. Ultrasonic vibration-assisted (UV-A) pelleting can produce biomass pellets whose density is comparable to that processed by traditional pelleting methods (e.g. extruding, briquetting, and rolling). This study applied response surface methodology to the development of a predictive model for the energy consumption in UV-A pelleting of wheat straw. Effects of pelleting pressure, ultrasonic power, sieve size, and pellet weight were investigated. This study also optimized the process parameters to minimize the energy consumption in UV-A pelleting using response surface methodology. Optimal conditions to minimize the energy consumption were the following: ultrasonic power at 20%, sieve size at 4 mm, and pellet weight at 1 g, and the minimum energy consumption was 2.54 Wh.     

Optimization of ultrasound extraction of functional compound from makiang seed by response surface methodology and antimicrobial activity of optimized extract with its application in orange juice

An ultrasound-assisted extraction (UAE) was optimized for the extraction of bioactive compound (total phenolic compound and total flavonoid content) with antioxidant activity (DPPH and FRAP assays) using response surface methodology based on Box-Behnken design (BBD). The effect of extraction temperature (X₁: 30–70 °C), extraction time (X₂: 25–45 min) and amplitude (X₃: 30–50%) were determined. In addition, antimicrobial activity and application of optimized makiang seed extract (MSE) were also evaluated. Results showed that the optimum condition of UAE were X₁: 51.82 °C, X₂: 31.87 min and X₃: 40.51%. It was also found that gallic acid was the major phenolic compound of optimized MSE and its minimum inhibitiory concentration (MIC) and minimum bactericidal concentration (MBC) was between 1.56 - 6.25 and 25–100 mg/mL respectively. The addition of MSE could enhance the stability of orange juice and shelf life extension was also obtained. This research finding suggests the beneficial opportunities for ultrasound-assisted extraction for the production of bioactive compound from makiang seed with antioxidant activity leading to an application in medicinal and functional food industry.     

On the use of response surface methodology to predict and interpret the preferred c-axis orientation of sputtered AlN thin films

This paper deals with experimental design applied to response surface methodology (RSM) in order to determine the influence of the discharge conditions on preferred c-axis orientation of sputtered AlN thin films. The thin films have been deposited by DC reactive magnetron sputtering on Si (1 0 0) substrates. The preferred orientation was evaluated using a conventional Bragg-Brentano X-ray diffractometer (θ-2θ) with the CuKα radiation. We have first determined the experimental domain for 3 parameters: sputtering pressure (2-6 mTorr), discharge current (312-438 mA) and nitrogen percentage (17-33%). For the setup of the experimental design we have used a three factors Doehlert matrix which allows the use of the statistical response surface methodology (RSM) in a spherical domain. A four dimensional surface response, which represents the (0 0 0 2) peak height as a function of sputtering pressure, discharge current and nitrogen percentage, was obtained. It has been found that the main interaction affecting the preferential c-axis orientation was the pressure-nitrogen percentage interaction. It has been proved that a Box-Cox transformation is a very useful method to interpret and discuss the experimental results and leads to predictions in good agreement with experiments.     

Process optimization and stability of D-limonene-in-water nanoemulsions prepared by ultrasonic emulsification using response surface methodology

d-limonene in water nanoemulsion was prepared by ultrasonic emulsification using mixed surfactants of sorbitane trioleate and polyoxyethylene (20) oleyl ether. Investigation using response surface methodology revealed that 10% d-limonene nanoemulsions formed at S₀ ratio (d-limonene concentration to mixed surfactant concentration) 0.6-0.7 and applied power 18 W for 120 s had droplet size below 100 nm. The zeta potential of the nanoemulsion was approximately −20 mV at original pH 6.4, closed to zero around pH 4.0, and around −30 mV at pH 12.0. The main destabilization mechanism of the systems is Ostwald ripening. The ripening rate at 25 °C (0.39 m³ s⁻¹ × 10²⁹) was lower than that at 4 °C (1.44 m³ s⁻¹ × 10²⁹), which was in agreement with the Lifshitz-Slezov-Wagner (LSW) theory. Despite of Ostwald ripening, the droplet size of d-limonene nanoemulsion remained stable after 8 weeks of storage.     

Ultrasound-assisted extraction of functional compound from mulberry (Morus alba L.) leaf using response surface methodology and effect of microencapsulation by spray drying on quality of optimized extract

This study aimed to optimize the ultrasound-assisted extraction (UAE) condition of mulberry leaf extract (MLE) using response surface methodology and to microencapsulate MLE by spray drying using different coating materials and ratios of coating material and MLE. The extraction results showed that MLE from condition of 60 °C (X₁, temperature), 30 min (X₂, time) and 60% v/v (X₃, ethanol concentration) exhibited the highest bioactive compound and antioxidant activity (DPPH and FRAP assay). Based on this optimal condition, MLE was further encapsulated by spray drying. It was found that MLE encapsulated with resistant maltodextrin at ratio of MLE and resistant maltodextrin 1:1 (w/w) showed the highest encapsulation yield (%) and encapsulation efficiency (%). Water solubility, moisture content and water activity were non-significant (p > 0.05) among the microcapsules. The scanning electron microscope (SEM) revealed that the types of coating material affected their microstructures and microcapsules prepared by resistant maltodextrin as coating material had a spherical shape, smooth surface and less shrinkage than microcapsules prepared by maltodextrin and gum arabic which had rough surfaces. The highest antioxidant activity was obtained from microcapsule prepared by gum arabic at ratio of MLE and gam arabic 1:2 (w/w). In conclusion, optimal condition from UAE and encapsulation by spray drying suggest the critical potential for production of functional food with improved bioactive compound stability and maximized antioxidant activity.     

Process optimization studies of 10-Hydroxycamptothecin (HCPT)-loaded folate-conjugated chitosan nanoparticles by SAS-ionic crosslink combination using response surface methodology (RSM)

10-Hydroxycamptothecin (HCPT) is a well-established topoisomerase I inhibitor of a broad spectrum of cancers. However, poor aqueous solubility, low instability, and toxicity to normal tissues have limited its clinical development. A novel HCPT-containing drug carrier system was developed to overcome these disadvantages. The response surface methodology was used to optimize the process of preparing HCPT-chitosan nanoparticles (HCPT-CSNPs) by the SAS-ionic crosslink (supercritical antisolvent SAS) combination method; the resulting HCPT-CSNPs were then conjugated with folate for specific targeting. A central composite design, composed of four independent variables, namely, chitosan concentration, TPP concentration, HCPT nanoparticle concentration, and crosslink time, was applied in the modeling process. The mean particle size and drug entrapment efficiency (DEE) of HCPT-CSNPs were chosen as response variables. The interactive effects of the four independent variables on the response variables were also studied. Nanoparticle characteristics such as morphology, DEE, and mean particle size were investigated. The optimum conditions for preparing HCPT-CSNPs were determined as follows: folate-coupled chitosan concentration 2.46 mg/ml, TPP concentration 7.73 mg/ml, HCPT nanoparticle concentration 0.48 mg/ml, and crosslinking time 47.4 min. Optimum conditions for preparing desired HCPT-CSNPs with a mean particle size of 173.5 nm and entrapment efficiency of 77.3% were obtained. The resulting folate-conjugated HCPT-CSNPs (FA-HCPT-CSNPs) reveal that the amount of folate conjugation was 197.64 mg/g CS. FA-HCPT-CSNPs used in drug carrier systems could have potential value in HCPT-sensitive tumors.     

Effect of surface viscosity,anchoring energy,and cell gap on the response time of nematic liquid crystals

An analytical expression for the relaxation time of a nematic liquid crystal is obtained for the first time by considering the influence of surface viscosity, anchoring energy strength and cell gap, validated numerically by using the so-called relaxation method. This general equation for the molecular response time (τ₀${\tau }_0$) was derived for a vertical aligned cell and by solving an eigenvalue equation coming from the usual balance of torque equation in the Derzhanskii and Petrov formulation, recovering the usual equations in the appropriate limit. The results show that τ∼d^b$\tau \sim d^b$, where b=2$b=2$ is observed only for strongly anchored cells, while for moderate to weak anchored cells, the exponent lies between 1 and 2, depending on both, surface viscosity and anchoring strength. We found that the surface viscosity is important when calculating the response time, specially for thin cells, critical for liquid crystal devices. The surface viscosity’s effect on the optical response time with pretilt is also explored. Our results bring new insights about the role of surface viscosity and its effects in applied physics.     

响应面法优化超声辅助提取-原子荧光法快速测定茶叶痕量汞

研究了一种使用超声波辅助提取(UAE)-原子荧光法测定茶叶痕量汞的快速方法.采用Plackett-Burman设计从6个影响汞提取率的因素中筛选出3个显著因素—超声时间St,超声温度T和HNO3:H2O2(1:1,δ)体积A2,并采用中心组合设计和响应面法优化参数.结果表明,最优提取条件为,浸泡时间6 min,St 8...     

Prediction of weld strength and seam width for laser transmission welding of thermoplastic using response surface methodology

In the present work, a study is made to investigate the effects of process parameters, namely, laser power, welding speed, size of the laser beam and clamp pressure, on the lap-shear strength and weld-seam width for laser transmission welding of acrylic (polymethyl methacrylate), using a diode laser system. Response surface methodology (RSM) is employed to develop mathematical relationships between the welding process parameters and the output variables of the weld joint to determine the welding input parameters that lead to the desired weld quality. In addition, using response surface plots, the interaction effects of process parameters on the responses are analyzed and discussed. The statistical software Design-Expert v7 is used to establish the design matrix and to obtain the regression equations. The developed mathematical models are tested by analysis-of-variance (ANOVA) method to check their adequacy. Finally, a comparison is made between measured and calculated results, which are in good agreement. This indicates that the developed models can predict the responses adequately within the limits of welding parameters being used.     

Spectroscopic, energetic and metallographic investigations of the laser lap welding of AISI 304 using the response surface methodology

Spectroscopic signals originated by the laser-induced plasma optical emission have been simultaneously investigated together with energetic and metallographic analyses of CO₂ laser welded stainless steel lap joint, using the Response Surface Methodology. This statistical approach allowed us to study the influence of the laser beam power and the laser welding speed on the following response parameters: plasma plume electron temperature, joint penetration depth and melted area. A clear correlation has been found between all the investigated response parameters. The results have been shown to be consistent with quantitative considerations on the energy supplied to the workpiece as far as the laser power and travel speed were varied. The regression model obtained in this way could be a valuable starting point to develop a closed loop control of the weld penetration depth and the melted area in the investigated process window.