Ultrastructure of antennal sensilla of an autoparasitoid Encarsia sophia (Hymenoptera: Aphelinidae)

Encarsia sophia (Hymenoptera: Aphelinidae) is a parasitoid utilized for biological control of Bemisia tabaci, with selection of prey aided by chemoreceptor organs. The morphology and distribution of the antennal sensilla (chemoreceptors) of E. sophia were examined using Transmission electron micrographs. The total antennal length for E. sophia was 429.28 ± 0.95 μm for females and 437.19 ± 8.21 for males, and each antennae was found to consist of seven sensilla of different types. Both sexes possessed sensilla chaetica, sensilla trichodea, basiconic capitate peg sensilla, multiporous grooved-surface placoid sensilla (MG-PS), uniporous rod-like sensilla, nonporous finger-like sensilla, and sensilla coeloconica. Transmission electron micrographs of longitudinal sections of female antennae showed that they were composed of fat body, cuticle, mesoscutello-metanotal muscles, neurons, and glandular tissue, and cross-sections of the basal MG-PS showed sensillar lymph cavities and dendrites. The MG-PSs were imbedded in an electron-dense mass with cuticular invaginations which acted as pores that connected to a central lumen. The possible function of each type of sensilla is discussed.     

Comparative ultrastructure of spermatozoa of the redclaw Cherax quadricarinatus and the yabby Cherax destructor (Decapoda,Parastacidae)

Ultrastructure of spermatozoa of redclaw Cherax quadricarinatus and yabby Cherax destructor were described and compared. The acrosome complex and nucleus are located at the anterior and posterior region of the spermatozoon, respectively. The acrosome is a complex vesicle divided into two parts: the main body of the acrosome appears as a dense cup-shaped structure in longitudinal sagittal view, with the subacrosome zone occupying the central area of the vesicle. The acrosome is larger in C. quadricarinatus (width 2.37 ± 0.27 μm, length 1.31 ± 0.23 μm) than in C. destructor (width 1.80 ± 0.27 μm, length 1.01 ± 0.15 μm). There was no significant difference in L:W ratios of the studied species. The subacrosome zone in both species consists of two areas of different electron density. The nucleus is substantially decondensed and irregular in shape, with elaborate extended processes. The examined species exhibited a well-conserved structure of crayfish spermatozoon, similar to those of Cherax cainii and Cherax albidus. Small acrosome size, the absence of radial arms, and an extracellular capsule seem to be the morphological features that mostly distinguish Cherax from the Astacidae and Cambaridae.     

Ultrastructure of the mature spermatozoon of the bivalve Scapharca broughtoni (Mollusca: Bivalvia: Arcidae)

The ultrastructure of mature spermatozoa of the giant clam bivalve Scapharca broughtoni was investigated by transmission electron microscopy for the first time. The mature spermatozoon consists of a head which is composed of a cone-shaped acrosome, a round nucleus, and a tail region. A subacrosomal space contains an axial rod and a basal plate, the latter lying between the acrosome and the nucleus. Although the nucleus lacks an anterior invagination, an inverted shallow V-shaped posterior invagination is present within the nucleus. Within the middle portion of the spermatozoon lie five spherical mitochondria while the long whip-like end portion is composed of an axoneme with the typical 9 + 2 structure. Our conclusion is that the spermatozoon of S. broughtoni is of the type I anacrosomal “aquasperm”, and the morphology of acrosome and nucleus are an adaptation to external fertilization.     

Structural and morphological properties of thin ZnO films grown by pulsed laser deposition

The pulsed laser deposition technique was used to produce zinc oxide thin films onto silicon and Corning glass substrates. Homogeneous surfaces exhibiting quite small Root Mean Square (RMS) roughness, consisting of shaped grains were obtained, their grain diameters being 40-90 nm at room temperature and at 650 °C growth respectively. Films were polycrystalline, even for growth at room temperature, with preferential crystallite orientation the (0 0 2) basal plane of wurtzite ZnO. Temperature increase caused evolution from grain to grain agglomeration structures, improving crystallinity. Compressive to tensile stresses transition with temperature was found while the lattice constant decreased.     

Temporal and morphological differences in post-embryonic differentiation of the mushroom bodies in the brain of workers, queens, and drones of Apis mellifera (Hymenoptera, Apidae)

The mushroom bodies are structures present in the insect brain described as centers for the neural basis of learning, memory, and other higher functions. Honeybees (Apis mellifera) are insects with a sophisticated system of spatial orientation and possess well-developed learning and memory capabilities, which are associated with neural and brain structures. Thus, the present study aimed to compare the mushroom bodies during post-embryonic development and in newly emerged males, workers, and queens using light and transmission electron microscopy to examine how differential morphological characteristics are established during development. Measurements of structures were also taken in several post-embryonic developmental phases in order to evaluate size differences during the process and in the adult organs. The results show that workers, queens, and males exhibit temporal and size differences during the post-embryonic development of mushroom bodies, probably as adaptations to differences in behavior complexity. The mushroom bodies of workers are precociously formed and are larger than those of queens and drones. Thus, workers have the largest mushroom bodies resulting from differential development during metamorphosis.     

Structural characterization of Ga-doped Mg0.1Zn0.9O layers grown on ZnO/α-Al2O3 templates by P-MBE

In this study, structural properties of epitaxial Ga-doped Mg_0.1Zn_0.9O layers grown on ZnO/α-Al₂O₃ templates by plasma-assisted molecular beam epitaxy have been investigated by high-resolution transmission electron microscopy (HRTEM), and high resolution X-ray diffraction (HRXRD). From analysis of the diffraction pattern, the monocrystallinity of the Mg_0.1Zn_0.9O layer with hexagonal structure is confirmed. The orientation relationship between Mg_0.1Zn_0.9O and the template is determined as (0 0 0 1)_Mg0.1Zn0.9O(0 0 0 1)_ZnO(0 0 0 1)_Al2O3 and [ [ ]_ZnO[ . The density of dislocations near the top surface layers measured by plan-view TEM is about 3.610¹⁰ cm⁻², one order of magnitude higher than the value obtained for ZnO layers on α-Al₂O₃ with a MgO buffer. Cross-sectional observation revealed that the majority of threading dislocations are in the [0 0 0 1] line direction, i.e. they lie along the surface normal and consist of edge, screw, and mixed dislocations. Cross- sectional TEM and X-ray rocking curve experiments reveal that most of dislocations are edge dislocations. The interface of Mg_0.1Zn_0.9O and ZnO layers and the effect of excess Ga-doping in these layers have been also studied.     

Composition of the “GaAs” quantum dot,grown by droplet epitaxy

Self-assembled strain-free quantum dot (QD) structures were grown on AlGaAs surface by the droplet epitaxal method. The QDs were developed from pure Ga droplets under As pressure. The QDs were investigated by atomic force microscopy (AFM) and transmission electron microscopy (TEM). Both techniques show that the QDs are very uniform in size and their distribution on the surface is also homogeneous. The high resolution cross-sectional TEM investigation shows perfect lattice matching between the QD and the substrate, and also the faceting of the side walls of QD can be identified exactly by lattice planes. Analytical TEM (elemental mapping by EELS) unambiguously identifies the presence of Al in the QD.     

Preparation and characterization of Fe3O4 magnetic composite microspheres covered by a P(MAH-co-MAA) copolymer

A magnetic core–shell-layered polymer microsphere (MPS) was successfully synthesized by a dispersion polymerization route, where the modified Fe₃O₄ nanoparticles (MFN) were used as a core, while poly(maleic anhydride-co-methacrylic acid) P(MAH-co-MAA) as a shell was covered on the surface of the Fe₃O₄ nanoparticles. Environmental scanning electron microscope (ESME) and transmission electron microscope (TEM) measurements indicate that the magnetic P(MAH-co-MAA)/Fe₃O₄ composite microspheres assume sphericity and have a novel core–shell-layered structure. The crystal particle sizes of the unimproved Fe₃O₄ and the MFN samples vary from 8 to 16 nm in diameter, and the average size is about 10.6 nm in diameter. The core–shell magnetic composite microspheres can be adjusted by changing the stirring speed. Since multiple Fe₃O₄ cores were coated with a proper percentage of P(MAH-co-MAA) copolymers, and therefore lower density was acquired for the MPS, which improved sedimentation and dispersion behavior. The saturated magnetization of pure Fe₃O₄ nanoparticles reaches 48.1 emu g⁻¹ and the value for composite nanoparticles was as high as 173.5 emu g⁻¹. The nanoparticles show strong superparamagnetic characteristics and can be expected to be used as a candidate for magnetism-controlled drug release.     

Morphological characterization via light and electron microscopy of Atlantic jackknife clam (Ensis directus) hemocytes

The Atlantic jackknife clam, Ensis directus, is currently being researched as a potential species for aquaculture operations in Maine. The goal of this study was to describe the hemocytes of this species for the first time and provide a morphological classification scheme. We viewed hemocytes under light microscopy (using Hemacolor, neutral red, and Pappenheim’s stains) as well as transmission electron microscopy (TEM). The 2 main types of hemocytes found were granulocytes and hyalinocytes (agranular cells). The granulocytes were subdivided into large and small granulocytes while the hyalinocytes were subdivided into large and small hyalinocytes. The large hemocytes had both a larger diameter and smaller nucleus to cell diameter ratio than their smaller counterparts. A rare cell type, the vesicular cell, was also observed and it possessed many vesicles but few or no granules. Using TEM, granulocytes were found to contain both electron-lucent and electron-dense granules of various sizes. These numerous granules were the only structures that took up the neutral red stain. Hyalinocytes had few of these granules relative to granulocytes. Large hyalinocytes had both various organelles and large vesicles in their abundant cytoplasm while small hyalinocytes had little room for organelles in their scant cytoplasm. Total hemocyte counts averaged 1.96 × 10⁶ cells mL⁻¹ while differential hemocyte counts averaged 11% for small hyalinocytes, 12% for large hyalinocytes, 59% for small granulocytes, and 18% for large granulocytes. The results of this study provide a starting point for future studies on E. directus immune function.     

Chemical and structural analysis of low-temperature excimer-laser annealing in indium-tin oxide sol-gel films

We investigated the influence of excimer-laser annealing (ELA) on the electrical, chemical, and structural properties of indium–tin oxide (ITO) films prepared by a solution process. The ITO film was prepared by the sol-gel method and annealed by excimer-laser pulses with an energy density up to 240?mJ/cm². Hall measurements showed that the ELA substantially enhanced the electrical properties of the ITO films, including their resistivity, carrier density, and mobility, as increasing the laser energy density. In-depth x-ray photoelectron spectroscopy analysis of the chemical states in the film surface showed that the ELA reduced carbon species and promoted both an oxidation and crystallization. These changes were consistent with results of x-ray diffraction and transmission electron microscopy measurements, where expansions in the microcrystal growth were observed for higher laser energy density. We comprehensively understand that the chemical rearrangement and concomitant crystallization are the main factors for achieving the electrical properties during the ELA. These results suggest the potential of the ELA-treated sol-gel films for providing high-quality ITO films at low temperatures toward the flexible device applications.     

Structural characterization of ultrathin Cr and Sc films for soft X-ray mirrors

The structure of multilayers of ultrathin scandium (Sc) and chromium (Cr) films has been characterized by means of transmission electron microscopy (TEM). Face centered cubic Sc was found both in magnetron sputtered thin Sc layers on Si(0 0 1) and in Cr/Sc multilayers for soft X-ray mirrors. The single Sc and Cr layers are polycrystalline with randomly oriented grains, while Sc and Cr within the Cr/Sc multilayer show a strong [0 0 1] texture in the deposition direction. From high-resolution images the orientation-relationship at the Cr/Sc interfaces could be deduced as: Sc_[110]//Cr_[100] and Sc_[010]//Cr_[110], which was confirmed by image simulations.     

Synthesis and characterization of Cr doped CdS nanoparticles stabilized with polyvinylpyrrolidone

Undoped and Cr (2 and 4 at.%) doped CdS nanoparticles were synthesized in aqueous solution by simple chemical co-precipitation method using polyvinylpyrrolidone (PVP) as stabilizer. The prepared nanoparticles were examined using X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDAX), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectroscopy (DRS) and Fourier transform infrared spectroscopy (FTIR). XRD pattern of the nanoparticles showed cubic zincblende phase with the particle size of the order of 3-4 nm, which was in good agreement with the results obtained from TEM studies. The EDAX analysis confirmed that Cd, Cr and S elements were present in the samples and the variations between the target and actual compositions were microscopic. UV-vis DRS spectra of the samples exhibited decrease in the band gap which further attests the incorporation of Cr into CdS nanoparticles. FTIR studies revealed that the undoped as well as Cr doped CdS nanoparticles were capped by polyvinylpyrrolidone.     

Fluence-dependent radiation damage in helium (He) ion-irradiated Cu/V multilayers

We have explored the capacity of Cu/V interfaces to absorb helium ion radiation-induced defects spanning a peak damage range of 0.6–18 displacements per atom (dpa). The study provides evidence of alleviated nucleation of He bubbles in the multilayer films from Cu/V 50?nm to Cu/V 2.5 nm. Layer interfaces are retained in all irradiated specimens. Peak bubble density increases monotonically with fluence, and is lower in multilayers with smaller individual layer thickness. Radiation hardening decreases with decreasing layer thickness and appears to reach saturation upon peak radiation damage of 6?dpa. Size- and fluence-dependent radiation damage in multilayers is discussed.     

Diffusion and segregation along grain boundary at the electrolyte-anode interface in IT-SOFC

The atomic level chemical and microstructural features of grain boundaries in gadolinium-doped ceria (GDC) electrolyte thin film supported by Ni-GDC cermet anode were characterized by high resolution transmission electron microscope (HR-TEM) and scanning TEM (STEM). It was found that metallic Ni can diffuse from the anode into the thin film electrolyte along grain boundaries. In addition, Ce and Gd can also diffuse and segregate at grain boundaries between Ni grains in the anode substrate. HR-TEM observations revealed that Ni diffusion and segregation at grain boundaries between GDC grains enhanced the inhomogeneity and led to microstructural changes at grain boundary regions, i.e. the formation of superstructure. The observations also indicated that enhanced inhomogeneity at grain boundaries might play a significant role in the conductivity of GDC electrolyte film in solid oxide fuel cells.     

Integrity of functional self-assembled monolayers on hydrogen-terminated silicon-on-insulator wafers

Silicon-on-insulator (SOI) wafers are commonly used to design microelectronics, energy conversion, and sensing devices. Thin solid films on the surfaces of SOI wafers have been a subject of numerous studies. However, SOI wafers modified by self-assembled monolayers (SAMs) that can also be used as functional device platforms have been investigated to a much lesser extent. In the present work, tert-butoxycarbonyl (t-boc, (CH₃)₃-C-O-C(O)-)-protected 1-amino-10-undecene monolayers were covalently attached to a H-terminated SOI (1 0 0) surface. The modified wafers were characterized by X-ray photoelectron spectroscopy to confirm the stability of the SAM/Si interface and the integrity of the secondary amine in the SAM. The transmission electron microscopy investigation suggested that this t-boc-protected 1-amino-10-undecene SAM produces atomically flat interface with the 2 μm single crystalline silicon of the SOI wafer, that the SiO_x and both available Si/SiO_x interfaces are preserved, and that the organic monolayers are stable, with apparent thickness of 1.7 nm, which is consistent with the result of the density functional theory modeling of the molecular features within a SAM.     

TEM studies of the effects of Zr additions on some HDDR-processed, high boron, NdFeB-type powders and hot-pressed magnets

The transmission electron microscope has been used to study the physical and magnetic microstructures of two HDDR-processed NdFeB-type alloys, one without Zr and the other containing 1.1 at% Zr. Studies were made of the as-produced powders and the solids produced following hot-pressing at 900°C. In the HDDR powders, the principal effects of adding Zr were to reduce the average grain size by and made the grain size distribution more uniform. In the hot-pressed samples, the effect of Zr was more dramatic in that grain growth was very significantly reduced. Zr-containing phases were identified and a simple model, due to Zener, used to provide a plausible explanation of how the small amount of Zr present could stabilise the grain size to ≈0.5 μm. The microstructural results correlated well with measured magnetic properties.     

Histochemical and ultrastructural changes of sternomastoid muscle in aged wistar rats

The aim of this study was to evaluate histochemically and ultrastructurally the sternomastoid muscle (SM) of adults and aged rats, employing histochemic (NADH-TR reaction) and transmission electron microscopic methods. It was used 20 rats, divided into two groups: adults (n = 10), animals with 4 months of age, and aged group (n = 10), animals with 24 months of age. Five animals from each group were anesthetized with an overdose of urethane (3 g/kg i.p.), and the muscles dissected after the samples processing for histochemical reaction (NADH-TR). Three types of fibers were identified by their metabolic characteristics: fibers with high oxidative capacity (O), intermediate oxidative capacity (OG) and low oxidative capacity (G). For transmission electron microscopic method, the animals were anesthetized and perfused by modified Karnovsky solution and the tissues were postfixed in 1% osmium tetroxide solution, dehydrated and embedded in Spurr resin. It was performed ultra-thin sections for transmission electron microscopic analysis. The SM showed heterogeneity in their composition according to the fiber types, with significant difference (p < 0.05) when comparing the fibers types between the superficial and deep regions and between the adult and aged groups. It was observe a decrease between the comparison of the total fibers density and GO fiber, and an increase of the O fiber in aged group. Ultrastructural characteristics of muscle cells in aged group showed typical morphological changes, characterizing muscular atrophy. We conclude based on physiological ageing process, changes in muscle fibers classification, and ultrastructuraly, morphological alterations on muscle cells, characterizing a muscular atrophy.     

Correlative microscopy of a carbide-free bainitic steel

In this work a carbide-free bainitic steel was examined by a novel correlative microscopy approach using transmission Kikuchi diffraction (TKD) and transmission electron microscopy (TEM). The individual microstructural constituents could be identified by TKD based on their different crystal structure for bainitic ferrite and retained austenite and by image quality for the martensite–austenite (M–A) constituent. Subsequently, the same area was investigated in the TEM and a good match of these two techniques regarding the identification of the area position and crystal orientation could be proven. Additionally, the M–A constituent was examined in the TEM for the first time after preceded unambiguous identification using a correlative microscopy approach. The selected area diffraction pattern showed satellites around the main reflexes which might indicate a structural modulation.