Bestimmung der Verteilung von Tritiumatomen in aliphatischen Mono- und Dicarbonsäuren

In order to determine the distribution of tritiumatoms in non saturated alicyclic hydrocarbon molecules, a new degradation method which gives higher yields than the methods used heretofore, was developed. It is a modification of the method of Hunter-Popjak. Results obtained with palmitic acid as test substance, and with suberic acid as degradation product of cis-cyclooctene, are given.     

Study on the cationic modification and dyeing of ramie fiber

A modification procedure for ramie fiber using 3-chloro-2-hydroxypropyltrimethyl ammonium chloride (CHPTAC) as a cationic agent and NaOH as a catalyst was developed in this paper. The morphological and structural transformations of the fiber induced by modification were determined by XRD (XRD), differential scanning calorimetry (DSC), and thermogravimetry analysis (TGA). XRD results show that the crystal structure of the modified fiber was still preserved although its crystallinity was decreased, which was confirmed from the TGA results. The mechanisms for the modification and dyeing of ramie fiber were analyzed, and the optimum modification conditions were determined to be the CHPTAC concentration of 30 g L⁻¹, the NaOH concentration of 15 g L⁻¹, the reaction temperature of 50 °C, and the reaction time of 60 min. The raw and the modified fibers were dyed with C.I. reactive red 2. The K/S values for the cationic modified fiber increased to be three times as high as the unmodified fiber. The dye uptakes increased greatly with an increase in the nitrogen contents up to 0.4% on the modified fibers.     

3,5-二甲基苯溴化镁修饰的ZSM-5催化剂乙苯歧化反应

采用尺寸较大的有机分子格式试剂（3,5-二甲基苯溴化镁）修饰ZSM-5催化剂,用乙苯歧化反应研究了修饰催化剂的择形性,并利用探针分子动力学扩散测试结合探针分子吸附红外等手段研究分子筛孔径和内外表面酸性性质等。结果表明,少量的3,5-二甲基苯溴化镁精确地中和了ZSM-5分子筛外表面的酸性中心,导致乙苯歧化反应中极高的对二乙苯选择性。而探针分子动力学结果表明,这种修饰并未引起分子筛孔道结构的变化。     

3，5-二甲基苯溴化镁修饰的ZSM-5催化剂乙苯歧化反应

采用尺寸较大的有机分子格式试剂（3,5-二甲基苯溴化镁）修饰ZSM-5催化剂,用乙苯歧化反应研究了修饰催化剂的择形性,并利用探针分子动力学扩散测试结合探针分子吸附红外等手段研究分子筛孔径和内外表面酸性性质等。结果表明,少量的3,5-二甲基苯溴化镁精确地中和了ZSM-5分子筛外表面的酸性中心,导致乙苯歧化反应中极高的对二乙苯选择性。而探针分子动力学结果表明,这种修饰并未引起分子筛孔道结构的变化。     

PoPD Modified ITO Based Capacitive Immunosensor for Sulphathiazole

A capacitive immunosensor for determination of sulphathaizole (STZ) has been developed on polymer coated indium tin oxide glass chip (ITO). The immunosensor chip was fabricated by polymerizing, ortho‐ phenylenediamine (o PD) on ITO followed by surface modification with anti‐sulphathiazole antibody. The developed immunosensor chip was characterized by using Atomic force microscopy (AFM), Cyclicvoltammetry (CV) and Electrochemical impedance spectroscopy (EIS). The capacitive measurement of the developed immunosensor was performed by using EIS in spiked drinking water and milk. The developed sensor showed liner detection range 0.1‐100 μgL⁻¹for STZ with a limit of detection 0.01 μgL⁻¹ in water with recovery between 95–106 %. The biosensor showed excellent selectivity and storage stability upto 4 weeks when preserved at 4 °C.     

NMR line‐fitting quantification of polysaccharide N‐acylurea‐based modification in glycoconjugates of Salmonella Typhi Vi polysaccharide

The polysaccharides modification via carbodiimide reaction is one of the most applied methods for obtaining conjugated vaccines against Salmonella enterica. However, N‐acylurea carbodiimide adduct generated in the process is a critical impurity in carbohydrate‐based vaccines. A quantitative NMR method was developed for assessing the N‐acylurea carbodiimide adduct impurity. The procedure was based on line‐fitting facilities for processing the NMR signals on complex spectra. The method showed good linearity, accuracy and precision under inter‐operator variation (relative standard deviation <5%). Copyright © 2017 John Wiley & Sons, Ltd.     

Covalent modification in aqueous solution of poly-γ-D-glutamic acid from bacillus licheniformis

Methods for the covalent modification in aqueous solution of poly-γ-D-glutamic acid from Bacillus licheniformis have been studied. Co-derivatization of a synthetic UV-absorbent amine and ethanolamine, using a water-soluble carbodi-imide coupling agent, yielded a water-soluble modified polymer. Derivatization of the polymer was accompanied by cleavage of the γ-linked polypeptide backbone, and a reduction in molecular mass from 170 to 10 kDa. A procedure was developed for the removal of noncovalently bound ligands by treatment with 5 M CaCl₂. The polymer sidechains also reacted in aqueous solution with p-nitrophenyl acetate to form covalent linkages. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 1995–1999, 1998     

Highly Selective and Sensitive Graphene Based Electrochemical Sensor for Quantification of Receptor Agonist Rizatriptan

A highly selective and sensitive electrochemical sensor has been developed by modification of a glassy carbon electrode (GCE) with graphene (GRP) for quantification of Rizatriptan. The significant increase of the peak current and the improvement of the oxidation peak potential indicate that the electrochemical sensor facilitates the electron transfer of Rizatriptan. The oxidation peak current was proportional to the Rizatriptan concentration in the range from 100 to 600 µg/mL with detection (LOD) and quantification limit (LOQ) of 36.52 and 121.73 µg/mL, respectively. The developed method was successfully employed for quantification of Rizatriptan in pharmaceutical formulations. The sensor shows great promise for simple, sensitive and quantitative detection of Rizatriptan.     

Green and Straightforward Modification of Graphite Electrode via In Situ Synthesis of Graphene Nanosheets for Quantifying Prazosin Hydrochloride in Urine Samples and Pharmaceutical Formulations

A sensitive electrochemical sensor based on in situ modification of graphite electrode via graphene nanosheets (GNs) was developed as a green method for prazosin hydrochloride (PRA) analyses. In this study, GNs were electrochemically synthesized on the surface of graphite electrode via in situ approach and used for the analyses. The proposed sensor showed several advantages such as high sensitivity, low LOD, and excellent repeatability. The oxidation peak current at the optimum analytical conditions using a GNs/graphite electrode at pH 6.0 was linearly dependent on PRA concentration in the range of 0.09–100 µM. A LOD of 0.02 µM and RSD of 3.8 % for 10 µM solution of PRA with a great recovery were obtained.     

Simultaneous Quantification of Puerarin and Daidzein in Rat Plasma by High-Performance Liquid Chromatography with Post-Column Modification and Fluorescence Detection

A sensitive HPLC method based on post-column modification and fluorescence detection has been developed for determination of puerarin and daidzein in rat plasma. Chromatographic separation was performed on a C₈ column with a linear gradient prepared from 0.5% aqueous acetic acid and 0.5% acetic acid in acetonitrile, delivered at a flow rate of 0.8 mL min⁻¹. Naringin was used as the internal standard. It was necessary to use acetic acid in the mobile phase to achieve good separation, but this led to fluorescence signal suppression, because puerarin and daidzein have native fluorescence at pH 8.0–9.0. To enhance the sensitivity, post-column modification with alkaline buffer was adopted. After this modification, detection sensitivity for puerarin and daizein increased more than 500-fold and 600-fold, respectively, compared with direct fluorescence detection. Signal-to-noise ratios for detection for puerarin were more than 150 times better than for UV detection after use of the same method of sample preparation. This sensitive analytical method was successfully used to determine pharmacokinetic data for puerarin and daidzein in rat plasma after oral administration of a single dose of Puerariae radix extract containing puerarin (approx. 8.4 mg) and daizein (approx. 5.9 mg) to male SD rats.     

N-terminal Cyclization of Peptides in Large-scale Protein Identification Based on Biological Mass Spectrometry

Biological mass spectrometry has been developed for the large-scale protein identification. The successful identification of protein in proteomic study is based on an effective match of MS data to the sequence in database. At times, because of the diversity and heterogeneity of protein modification, the experimental data obtained by mass spectrometry does not match the theoretical value; hence, approximately 90 percent or more of the tandem mass spectra cannot be identified effectively. This has become one of the most important technique issues to be resolved in current proteome research. The N-terminal cyclization of peptides, as one of a variety of modification introduced in sample preparation, has been preliminarily studied in this work. The result showed that N-terminal cyclization occurred in most of the glutamine (Q) or carbamoylmethyl-cysteine (CAM_C) residues, and the reaction is often incomplete or partial; both types of peptides can often exist in its respective state at the same time, and the behavior of modified peptides in reversion phase chromatography is changed. The success rate of protein identification could be obviously improved by the addition of the N-terminal cyclization modification in the database searching. These results will be very helpful in the mass spectrometric data analysis of proteomic study.     

Synthesis of Oligonucleotides Carrying Anchoring Groups and Their Use in the Preparation of Oligonucleotide–Gold Conjugates

Oligodeoxynucleotide conjugates 1 – 15 carrying anchoring groups such as amino, thiol, pyrrole, and carboxy groups were prepared. A post‐synthetic modification protocol was developed. In this method 2′‐deoxy‐O⁴‐(p‐nitrophenyl)uridine‐3‐phosphoramidite was prepared and incorporated in oligonucleotides. After assembly, the modified nucleoside was made to react with different amines carrying the anchoring groups. At the same time, protecting groups were removed to yield the desired oligonucleotide conjugates. In a second approach, amino, thiol, and carboxylic groups were introduced into the 3′‐end of the oligonucleotides by preparing solid supports loaded with the appropriate amino acids. Oligonucleotide gold conjugates were prepared and their binding properties were examined.     

Modified one-electron hamiltonian method in the MC SCF theory

For orbital optimization within the MC SCF theory a modification of the OEH method is proposed with the direction of descent determined according to the Fletcher–Reeves gradient method. The combined method developed on this basis ensures the convergence of the iterative process when the Hessian singularities occur. The convergence properties of the method proposed are studied by performing the ab initio water molecule calculations using two types of multiconfigurational wave functions.     

Electrochemical Quantitative Evaluation of the Surface Charge of a Poly(1-Vinylimidazole) Multilayer Film and Application to Nanopore pH Sensor

Nanopore pH sensing is based on the interaction between the surface charge of the nanopore and ions passing through the nanopore. The nanopore surface charge can be derived from the acid-base dissociation equilibrium of the modified polyelectrolyte. Various polyelectrolytes have been selected based on the acid dissociation constant of the monomer units, and various techniques have been applied to modify nanopores. However, they have been developed without clear guidelines for characterizing the surface modification status or surface charge. One reason has been the difficulty in accurately estimating the surface charge of nanopores in solution. Thus, in this study, the dissociation constant (pKa_app) of the surface charge of a modified polyelectrolyte nanopore was quantitatively estimated via electrochemical measurements. Previously, the modification status of nanopores has been evaluated using the ion current response. In addition, we monitored in real-time the polyelectrolyte modification status using a quartz crystal microbalance (QCM). Some polyelectrolytes were difficult to immobilize directly on the nanopore surface, and those polymers could be effectively modified by the layer-by-layer (LbL) technique. Therefore, we produced a guideline for the fabrication of a nanopore sensor for pH measurements under physiological conditions by quantitative evaluation of the pKa_app via electrochemical methods, the monitoring of the modification status by QCM, and the development of an effective modification method via the LbL technique.     

Immobilization of Antibodies on Magnetic Carbonaceous Microspheres for Selective Enrichment of Lysine‐acetylated Proteins and Peptides

Lysine acetylation is a dynamic and reversible modification, which has been proved to be a key posttranslational modification in cellular regulation. However, the low amounts of the acetylated proteins could hardly be detected before enrichment. In this study, for the first time, antibody‐immobilized magnetic carbonaceous microspheres were developed for selective enrichment of acetylated proteins and peptides. At first, standard proteins composed of acetylated bovine serum albumin, myoglobin, α‐casein and ovalbumin were used as model proteins to verify the enrichment efficiency. Then, the synthesized peptide was employed to confirm the selectivity of the method. Besides, the antibody‐immobilized magnetic particles were successfully applied to analyze mouse mitochondrial proteins. After database search, 29 acetylated sites in 26 proteins were identi?ed.     

Self‐Assembled Monolayers of Cucurbit[6]uril on a Gold Electrode for 4,4′‐Oxydianiline Determination. Analytical Application

Self‐assembled monolayers of cucurbit[6]uril (CB[6]) on a gold electrode have been used for 4,4′‐oxydialine (ODA) analysis. The formation of the supramolecular complex between ODA and CB[6] was used for the molecular selection and the electroanalytical determination of this analyte. In addition to this, all the parameters affecting the modification of the gold electrode and the determination of 4,4′‐oxydianiline were optimized by square wave voltammetry. Upon the electrode modification, pentanethiol was employed to fill up the exposed surface between CB[6] molecules. The calculated detection and determination limits were 0.06 µg mL^?1 and 0.19 µg mL^?1, respectively, with good accuracy and precision as shown by the calculated values for the relative error and relative standard deviation (E_r=0.1 % and RDS=2.9 %; n=10 ). Moreover, the developed methodology was successfully applied to the 4,4′‐oxydialine determination in real wastewaters and shoe‐dyeing samples.     

Enantioselective Oxidative Gold Catalysis Enabled by a Designed Chiral P,N‐Bidentate Ligand

A newly developed P,N‐bidentate ligand enables enantioselective intramolecular cyclopropanation by a reactive α‐oxo gold carbene intermediate generated in situ. The ligand design is based on our previously proposed structure (with a well‐organized triscoordinated gold center) of the carbene intermediate in the presence of a P,N‐bidentate ligand. A C₂‐symmetric piperidine ring was incorporated in the ligand as the nitrogen‐containing moiety. A range of racemic transformations of α‐oxo gold carbene intermediates have been developed recently, and this new class of chiral ligands could enable their modification for asymmetric synthesis, as demonstrated in this study.     

Concise Synthesis of Ximenynic Acid

Abstract

An improved synthesis of ximenynic acid (1) starting from castor oil has been developed with the direct chlorination of ricinstearolic acid as the key step. By this modification, the synthetic route was more concise and economic. The separation of geometric somers was achieved by repeated urea fractionation.

Supplemental materials are available for this article. Go the publisher's online edition of Synthetic Communications to view the free supplemental file.     

Chemical Deprenylation of N6‐Isopentenyladenosine (i6A) RNA

N⁶‐isopentenyladenosine (i⁶A) is an RNA modification found in cytokinins, which regulate plant growth/differentiation, and a subset of tRNAs, where it improves the efficiency and accuracy of translation. The installation and removal of this modification is mediated by prenyltransferases and cytokinin oxidases, and a chemical approach to selective deprenylation of i⁶A has not been developed. We show that a selected group of oxoammonium cations function as artificial deprenylases to promote highly selective deprenylation of i⁶A in nucleosides, oligonucleotides, and live cells. Importantly, other epigenetic modifications, amino acid residues, and natural products were not affected. Moreover, a significant phenotype difference in the Arabidopsis thaliana shoot and root development was observed with incubation of the cation. These results establish these small organic molecules as direct chemical regulators/artificial deprenylases of i⁶A.     

Chemical Deprenylation of N6-Isopentenyladenosine (i6A) RNA

N⁶-isopentenyladenosine (i⁶A) is an RNA modification found in cytokinins, which regulate plant growth/differentiation, and a subset of tRNAs, where it improves the efficiency and accuracy of translation. The installation and removal of this modification is mediated by prenyltransferases and cytokinin oxidases, and a chemical approach to selective deprenylation of i⁶A has not been developed. We show that a selected group of oxoammonium cations function as artificial deprenylases to promote highly selective deprenylation of i⁶A in nucleosides, oligonucleotides, and live cells. Importantly, other epigenetic modifications, amino acid residues, and natural products were not affected. Moreover, a significant phenotype difference in the Arabidopsis thaliana shoot and root development was observed with incubation of the cation. These results establish these small organic molecules as direct chemical regulators/artificial deprenylases of i⁶A.