Probing Metal Ion Complexation of Ligands with Multiple Metal Binding Sites: The Case of Spiropyrans

Among known molecular switches, spiropyrans attract considerable interest because of their reversible responsiveness to external stimuli and the deep conformational and electronic changes that characterize the switching process between the two isomeric forms [spiropyran (SP) and merocyanine (MC)]. Metal coordination is one of the most interesting aspects of spiropyrans for its potential in sensing, catalysis, and medicinal chemistry, but little is known about the details surrounding spiropyran–metal ion binding. We investigated the interplay between an N‐modified 8‐methoxy‐6‐nitrospiropyran (SP‐E), designed to provide appropriate molecular flexibility and a range of competing/collaborative metal binding sites, with Mg²⁺, Cu²⁺ and Zn²⁺, which were chosen for their similar coordination geometry preferences while differing in their hard/soft character. The formed molecular complexes were studied by means of UV/Vis, fluorescence, and NMR spectroscopies and mass spectrometry, and the crystal structure of the SP‐E–Cu complex was also obtained. The results indicate that the Mg²⁺, Zn²⁺ and Cu²⁺ complexes have identical coordination stoichiometry. Furthermore, the Mg²⁺ and Zn²⁺ complexes display fluorescence properties in solution and visible‐light responsiveness. These results provide important spectroscopic and structural information that can serve as a foundation for rational design of spiropyran‐based smart materials for metal sensing and scavenging applications.     

Studies of micro-brownian motion of a polymer chain by the fluorescence polarization method. II. Segmental motions in concentrated polymer solutions

The fluorescence polarization method has been used to study the micro-Brownian motion of a terminal segement of a polymer chain in concentrated solutions. A new apparatus for determining the fluorescence intensity and its polarization degree was designed. By using this apparatus, the rotational relaxation time 〈ρ〉 of the terminal segment of the fluorescent conjugates of polyacrylamide in aqueous polyacrylamide solutions was obtained as a function of polymer concentration from 0 to 65%, molecular weight of the conjugate from 3.5 × 10⁴ to 3 × 10⁵, and temperature from 10 to 30°C. The logarithm of 〈ρ〉 increased approximately linearly with increasing polymer concentration. This increase in 〈ρ〉, amounting to a factor of 20 times, was less marked than that in macroscopic viscosity. At concentrations less than 30%, 〈ρ〉 depended appreciably on the molecular weight of the conjugate.     

Studying the photophysical properties of a polymerizable 1,8‐naphthalimide dye and its copolymer with styrene as potential fluorescent sensors for metal cations

The photophysical characteristics of a polymerizable 1,8‐naphthalimide dye and its copolymer with styrene have been investigated. The functional properties of both low and high molecular weight fluorophores in the presence of different metal cations have been discussed with regard to their potential application as fluorosensors for the metal cations and protons. In acetonitrile solution the monomeric 1,8‐naphthalimide enhances its fluorescence emission in the presence of metal cations (Zn²⁺, Fe³⁺, Co²⁺, Pb²⁺, Cu²⁺, Ni²⁺, and Mn²⁺). In aqueous media the poly(St‐co‐MD) exhibits a selective response to Fe³⁺ cations. The monomeric and polymeric fluorophores also exhibit a considerable increase in their fluorescence intensity at acidic pH values (pH < 6) which suggest that they could be used as ON–OFF probes in analytical devices for signaling the presence of protons. Copyright © 2008 John Wiley & Sons, Ltd.     

Coumarine–imino–C2-glucosyl conjugate as receptor for Cu in blood serum milieu,on silica gel sheet and in Hep G2 cells and the characterization of the species of recognition

A coumarine–imino–C2-glucosyl conjugate (L) was synthesized and characterized. The conjugate L is found to recognize Cu²⁺ in aqueous HEPES buffer by exhibiting a 95% fluorescence quenching in pH range 7–10 even in the presence of several biologically and ecologically relevant metal ions. Fluorescence on–off behavior has been clearly demonstrated on the basis of the binding variability of Cu²⁺ to L. The binding has been elicited through the changes observed in fluorescence, absorption, ESI-MS and ¹H NMR titrations. All the other thirteen metal ions studied did not show any change in the fluorescence emission. These ions do not interfere with the recognition of Cu²⁺ by L. The structural features of [CuL]₂ complex in both the isomeric forms were established by DFT computational calculations. The utility of L has been demonstrated by showing its sensitivity toward Cu²⁺ on a thin layer of silica gel. The L gives sensitive fluorescence signals for Cu²⁺ even in blood serum and exhibits appropriate fluorescence responses in living cells.     

Acid‐Base Switchable [2]‐ and [3]Rotaxane Molecular Shuttles with Benzimidazolium and Bis(pyridinium) Recognition Sites

For the purpose of developing higher level mechanically interlocked molecules (MIMs), such as molecular switches and machines, a new rotaxane system was designed in which both the 1,2‐bis(pyridinium)ethane and benzimidazolium recognition templating motifs were combined. These two very different recognition sites were successfully incorporated into [2]rotaxane and [3]rotaxane molecular shuttles which were fully characterized by ¹H NMR, 2D EXSY, single‐crystal X‐ray diffraction and VT NMR analysis. By utilizing benzimidazolium as both a recognition site and stoppering group it was possible to create not only an acid/base switchable [2]rotaxane molecular shuttle (energy barrier 20.9 kcal?mol^?1) but also a [3]rotaxane molecular shuttle that displays unique dynamic behavior involving the simultaneous motion of two macrocyclic wheels on a single dumbbell. This study provides new insights into the design of switchable molecular shuttles. Due to the unique properties of benzimidazoles, such as fluorescence and metal coordination, this new type of molecular shuttle may find further applications in developing functional molecular machines and materials.     

Dinuclear Complexes with Predictable Magnetic Properties

When two paramagnetic transition metal ions are present in the same molecular entity, the magnetic properties can be totally different from the sum of the magnetic properties of each ion surrounded by its nearest neighbors. These new properties depend on the nature and the magnitude of the interaction between the metal ions through the bridging ligands. If both ions have an unpaired electron (e.g. Cu²⁺ ions), then the molecular state of lowest energy is either a spin singlet or a spin triplet. In the former case, the interaction is said to be antiferromagnetic, in the latter case ferromagnetic. The nature and the order of magnitude of the interaction can be engineered by judiciously choosing the interacting metal ions and the bridging and terminal ligands, and, thus, by the symmetry and the delocalization of the orbitals centered on the metal ions and occupied by the unpaired electrons (magnetic orbitals). The first success in this “molecular engineering” of bimetallic compounds was in the synthesis of a Cu²⁺VO²⁺ heterobimetallic complex in which the interaction is purely ferro-magnetic. The same strategy could be utilized for designing molecular ferromagnets, one of the major challenges in the area of molecular materials. Another striking result is the possibility of tuning the magnitude of the interaction through a given bridging network by modifying the nature of the terminal ligands, which, in some way, play the role of “adjusting screws”. By careful selection of the bridging and terminal ligands, a very large antiferro-magnetic interaction can be achieved, even if the metal ions are far away from each other. Some sulfur-containing bridges are especially suitable in this respect.     

Pseudo-crown ether having AIE and PET effects from a TPE-CD conjugate for highly selective detection of mercury ions

A new tetraphenylethylene-cyclodextrin（TPE-CD） conjugate with a linkage composed of long triethylene glycol chain and triazole ring on the CD rim has been designed and synthesized. The TPE-CD conjugate exists in a stretched form in DMSO and enhances its fluorescence after addition of a small amount of water due to aggregation-induced emission（AIE） effect. However, in the presence of a large amount of water, the TPE unit will enter the cyclodextrin cavity to form a folded self-inclusion compound....     

Synthesis of benzanthron derivatives for selective detection by fluorescence of copper ions

The paper reports on the synthesis of two new benzanthron derivatives with intense yellow-orange fluorescence and their copolymers with styrene. The photophysical characteristics of the new low and high molecular weight fluorescent compounds have been studied in organic solvents of different polarity. The effect of the chemical nature of the C-3 substituent on the photophysical properties of the new dyes is discussed. The complexes formed between the benzanthron fluorophores and metal cations in solution have been studied with regard to potential applications as fluorescent sensors for metal ion contamination. The results show that the C-3 substituent determines a selective response to the presence of Cu²⁺ cations. In the case of copolymers the effect of the metal cations on the fluorescence intensity is negligible.     

Polymorph‐Dependent Solid‐State Fluorescence and Selective Metal‐Ion‐Sensor Properties of 2‐(2‐Hydroxyphenyl)‐4(3H)‐quinazolinone

2‐(2‐Hydroxy‐phenyl)‐4(3H)‐quinazolinone (HPQ), an organic fluorescent material that exhibits fluorescence by the excited‐state intramolecular proton‐transfer (ESIPT) mechanism, forms two different polymorphs in tetrahydrofuran. The conformational twist between the phenyl and quinazolinone rings of HPQ leads to different molecular packing in the solid state, giving structures that show solid‐state fluorescence at 497 and 511 nm. HPQ also shows intense fluorescence in dimethyl formamide (DMF) solution and selectively detects Zn²⁺ and Cd²⁺ ions at micromolar concentrations in DMF. Importantly, HPQ not only detects Zn²⁺ and Cd²⁺ ions selectively, but it also distinguishes between the metal ions with a fluorescence λ_max that is blue‐shifted from 497 to 420 and 426 nm for Zn²⁺ and Cd²⁺ ions, respectively. Hence, tunable solid‐state fluorescence and selective metal‐ion‐sensor properties were demonstrated in a single organic material.     

Turn-on fluorescent probe for Zn2+ ions based on thiazolidine derivative

In this study, simple on–off fluorescent/UV–visible (UV–Vis) probes were easily prepared using 2-(2-hydroxyphenyl)thiazolidine-4-carboxylic acid ( Sen-1 ) and/or 2-(2-hydroxy-5-nitrophenyl)thiazolidine-4-carboxylic acid ( Sen-2 ) for fast detection of Zn²⁺ ions. Their sensing properties towards common metal ions were investigated using UV–Vis and fluorescence spectroscopies. Sen-1 and Sen-2 displayed a significant change with the addition of Zn²⁺ ions in the UV–Vis spectra. The addition of Zn²⁺ ions induced a 104 nm bathochromic shift for Sen-1 . The binding ratio towards Zn²⁺ metal ions was determined to be 1:1 by using Job plot analysis and fluorescence spectroscopy. The association constant and free energy (ΔG) of Sen-1 and Sen-2 towards Zn²⁺ ions were calculated by the Benesi–Hildebrand equation. The limit of detection of Sen-1 towards Zn²⁺ ions is 3.73 × 10⁻⁸ M, which is about 1/100 of the value recommended by the World Health Organization for drinking water. Sen-1 was successfully applied to detect Zn²⁺ ions in water samples and the fluorescence test strip was prepared for visual detection of Zn²⁺ ions. Finally, the quantum chemical parameters of Sen-1 and Sen-2 , such as highest occupied molecular orbital, lowest unoccupied molecular orbital, and chemical hardness, were investigated by the Becke, three-parameter, Lee–Yang–Parr, Hartree–Fock, and M062x methods.     

Studies of the micro-brownian motion of a polymer chain by the fluorescence polarization method. III. Fluorescent conjugates of polyethyleneimine

Fluorescent conjugates of polyethyleneimine (PEI) were prepared by conjugation of fluorescent dyes, fluorescein isocyanate (FIC), and 1-dimethylaminonaphthalene-5-sulfonyl chloride (DNS), to PEI. The degree of polarization of the fluorescence was measured as a function of temperature and solvent viscosity on aqueous solutions of the conjugates and the data thus obtained were analyzed in terms of an equation of the Perrin type to calculate the mean relaxation time of the conjugate. The mean relaxation times obtained for the two types of the conjugates, which differ in the excited lifetime by a factor of about three, practically agree with one another and are about 2.5 X 10^?8 sec. The relaxation time of the DNS conjugate increases with increasing molecular weight of the conjugate from 2 X 10^?8 to 4 X 10^?8 sec. These values are much larger than those of the PAA conjugates reported in Part I of this series. The relaxation time of this order may correspond to that for the cooperative rotary motion of about ten monomeric residues on the PEI chain, that is, for the motion of an intermediate segment of the PEI molecule in solution. Finally, relaxation time–molecular weight relationships for various types of fluorescent conjugates are compared. It is suggested that these data may serve as a basis for elucidating the mode of motion of a given molecule in solution from the polarization data.     

A fluorescent sensor for Al3+ based on a photochromic diarylethene with a hydrazinobenzothiazole Schiff base unit

A new fluorescent turn-on chemosensor for Al³⁺ based on a diarylethene unit was designed and synthesized. Photochromism, fluorescence switch, and metal ion recognition behaviors of this diarylethene derivative were investigated by absorption and fluorescence emission spectra. It shows an outstanding fluorometric sensing ability toward Al³⁺ ion, and the detection limit was measured to be 9.3 × 10^?8 mol L^?1 via fluorescence methods. Based on these interesting properties, a combinational logic circuit was constructed successfully.     

Molecular Logic Gates and Switches Based on 1,3,4‐Oxadiazoles Triggered by Metal Ions

Organic molecular devices for information processing applications are highly useful building blocks for constructing molecular‐level machines. The development of “intelligent” molecules capable of performing logic operations would enable molecular‐level devices and machines to be created. We designed a series of 2,5‐diaryl‐1,3,4‐oxadiazoles bearing a 2‐(para‐substituted)phenyl and a 5‐(o‐pyridyl) group (substituent X=NMe₂, OEt, Me, H, and Cl; 1 a – e ) that form a bidentate chelating environment for metal ions. These compounds showed fluorescence response profiles varying in both emission intensity and wavelength toward the tested metal ions Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, and Pb²⁺ and the responses were dependent on the substituent X, with those of 1 d being the most substantial. The 1,3,4‐oxadiazole O or N atom and pyridine N atom were identified as metal‐chelating sites. The fluorescence responses of 1 d upon metal chelation were employed for developing truth tables for OR, NOR, INHIBIT, and EnNOR logic gates as well as “ON‐OFF‐ON” and “OFF‐ON‐OFF” fluorescent switches in a single 1,3,4‐oxadiazole molecular system.     

Metal-Organic Frameworks with Novel Catenane-like Interlocking: Metal-Determined Photoresponse and Uranyl Sensing

The assembly of two tripyridinium-tricarboxylate ligands and different metal ions leads to seven isostructural MOFs, which show novel 2D→2D supramolecular entanglement featuring catenane-like interlocking of tricyclic cages. The MOFs show tripyridinium-afforded and metal-modulated photoresponsive properties. The MOFs with d¹⁰ metal centers ( 1-Cd , 1-Zn , 2-Cd , 2-Zn ) show fast and reversible photochromism and concomitant fluorescence quenching, 1-Ni displays slower photochromism but does not fluoresce, and 1-Co and 2-Co are neither photochromic nor fluorescent. It is shown here that the network entanglement dictates donor-acceptor close contacts, which enable fluorescence originated from interligand charge transfer. The contacts also allow photoinduced electron transfer, which underlies photochromism and concomitant fluorescence response. The metal dependence in fluorescence and photochromism can be related to energy transfer through metal-centered d-d transitions. In addition, 1-Cd is demonstrated to be a potential fluorescence sensor for sensitive and selective detection of UO₂²⁺ in water.     

Unique Fluorogenic Ratiometric Fluorescent Chemodosimeter for Rapid Sensing of CN− in Water

A new benzimidazole‐spiropyran conjugate chemosensor molecule ( BISP ) has been synthesized and characterized by ¹H NMR spectroscopy, mass spectrometry (ESI‐MS), and elemental analysis. The two isomeric forms ( BISP ? BIMC ) were shown to be highly selective and sensitive to CN^? among the ten anions studied in aqueous HEPES buffer, as shown by fluorescence and absorption spectroscopy and even by visual color changes, with a detection limit of 1.7 μM for BIMC . The reaction of CN^? with BIMC was monitored by ¹H NMR spectroscopy, high‐resolution mass spectrometry (HRMS), UV/Vis measurements, and fluorescence spectroscopy in HEPES buffer of pH 7.4. TDDFT calculations were performed in order to correlate the electronic properties of the chemosensor with its cyanide complex. Further, titration against thiophilic metal ions like Au³⁺, Cu²⁺, Ag⁺, and Hg²⁺ with [ BIMC‐CN ] in situ showed that it acts as a secondary recognition ensemble toward Au³⁺ and Cu²⁺ by switch‐on fluorescence. In addition, a reversible logic‐gate property of BIMC has been demonstrated through a feedback loop in the presence of CN^? and Au³⁺ ions, respectively. Furthermore, the use of BIMC to detect CN^? in live cells by fluorescence imaging has also been demonstrated. Notably, test strips based on BIMC were fabricated, which could serve as convenient and efficient CN^? test kits.     

A novel time-resolved laser fluorescence spectroscopy system for research on complexation of uranium(IV)

To date only a small number of studies have investigated the chemical speciation of complexes and the fluorescence properties of metal ions whose emitted fluorescence lifetime is in the range of only few nanoseconds. This is due to a lack of advanced methods which allow the conduction of these measurements. In the current study we set up a new time-resolved laser fluorescence spectroscopy system with which the fluorescence properties of metal ions with very short fluorescence lifetimes such as uranium(IV) and its compounds can be investigated. By studying the fluorescence properties of uranium(IV) in perchloric acid, we showed uranium(IV) to have a detection limit of 5 × 10⁻⁷ M and a fluorescence decay time of 2.74 ± 0.36 ns. We further investigated the fluorescence properties of uranium(IV) during the reaction with fluoride and applied our novel laser system to study the complexation of uranium(IV) with fluoride.Our data revealed the formation of a 1:1 complex of uranium(IV) and fluoride. The corresponding complex formation constant of uranium(IV) fluoride UF³⁺ was found to be log β⁰ = 9.43 ± 1.94. Our results demonstrate that our novel time-resolved laser fluorescence spectroscopy system can successfully conduct speciation measurements of metal ions and their compounds with very short-lived fluorescence lifetimes. Using this laser system, it is possible to analytically investigate such elements and compounds in environmentally relevant concentration ranges.     

5-氟尿嘧啶卟啉锰/锌配合物的合成、光电性质及抗癌活性

合成了新型5-氟尿嘧啶修饰的自由卟啉5-(2-(5-氟尿嘧啶-3-基)乙氧基苯基)-10,15,20-三苯基卟啉(L)及其锰配合物(MnL)和锌配合物(ZnL)。通过紫外-可见光谱、红外光谱、核磁共振氢谱及高分辨质谱等手段进行了结构表征。研究了它们的荧光性质和电化学性质;应用标准磺酰罗丹明B法(SRB法)测试了目标化合物对人肺癌细胞株A549、人肝癌细胞株Bel-7402和人结肠癌细胞株HCT-8生长的抑制活性。结果表明:相同实验条件下,不同金属离子对配合物的荧光强度存在较大影响:锌配合物具有荧光猝灭的性质,而锰配合物未能观察到明显的荧光发射光谱;与自由卟啉和锌配合物相比,锰配合物除卟啉环发生氧化还原反应外,Mn~(2+)自身也发生了氧化还原反应;抗癌活性测试显示锰配合物较其他2种化合物有较好的抗癌活性。     

Chromenone-rhodamine conjugate for naked eye detection of Al3+ and Hg2+ ions in semi aqueous medium

Chromenone-rhodamine conjugate 1 has been synthesized and its metal ion binding properties have been studied in CH₃CN/water (3:1, v/v; 10 mM HEPES buffer; pH = 6.85). Compound 1 senses multiple metal ions such as Al³⁺ and Hg²⁺ by exhibiting turn on fluorescence and color change (colorless to pink). Al³⁺ and Hg²⁺ ions have been distinguished with the aid of tetrabutylammonium iodide (TBAI). While in the presence of I^? the pink color of the 1.Hg²⁺ complex was completely discharged; under identical conditions the pink color of 1.Al³⁺ complex was retained.     

Incorporation of Bulky and Cationic Cyclam-Triazole Moieties into Marimastat Can Generate Potent MMP Inhibitory Activity without Inducing Cytotoxicity

The synthesis and matrix metalloproteinase (MMP) inhibitory activity of a cyclam–marimastat conjugate and its metal complexes are described. The conjugate, synthesized with a copper(I)-catalyzed Huisgen 1,3-dipolar cycloaddition (“click” reaction), contains two zinc-binding groups (ZBGs). The metal complexation behavior with copper(II) and zinc(II) was investigated using UV/Vis spectrophotometry and ¹H NMR spectroscopy, respectively, demonstrating that the first equivalent of the metal ion was chelated by the cyclam-triazole moiety rather than the hydroxamic acid site. Thus, the corresponding mononuclear metal–cyclam complexes were successfully prepared with one equivalent of the metal salt. Both the cyclam–marimastat conjugate and its metal complexes exhibited slightly reduced potency against MMP-1, but essentially identical inhibitory activity against MMP-3. The conjugate and its metal complexes displayed little or no cytotoxicity, further supporting their potential suitability for imaging MMP localization and activity. To the best of our knowledge, this is the first report that describes the incorporation of metal complexes into an MMP inhibitor without influencing the preexisting ZBG, and the first report of the evaluation of structures containing more than one ZBG as MMP inhibitors.