Cell‐Penetrating and Neurotargeting Dendritic siRNA Nanostructures

We report the development of dendritic siRNA nanostructures that are able to penetrate even difficult to transfect cells such as neurons with the help of a special receptor ligand. The nanoparticles elicit strong siRNA responses, despite the dendritic structure. An siRNA dendrimer directed against the crucial rabies virus (RABV) nucleoprotein (N protein) and phosphoprotein (P protein) allowed the suppression of the virus titer in neurons below the detection limit. The cell‐penetrating siRNA dendrimers, which were assembled using click chemistry, open up new avenues toward finding novel molecules able to cure this deadly disease.     

Solution‐Processed Bulk Heterojunction Photovoltaic Cells from Gradient π‐Conjugated Thienylene Vinylene Dendrimers

A series of gradient π‐conjugated dendrimers and their corresponding models based on 5,5,10,10,15,15‐hexahexyltruxene moieties as nodes and oligo(thienylene vinylene) (OTVs) units with different lengths as branching arms are synthesized in good yields through Wittig–Horner reactions. All new compounds are fully characterized by ¹H and ¹³C NMR spectroscopy, elemental analysis, and MALDI‐TOF MS or ESI‐MS. Investigation of their photophysical properties reveals that the gradient dendritic scaffold not only results in a higher molar absorption coefficient and broader absorption region than those of their corresponding model compounds, but also improves the PL quantum yields relative to the corresponding OTVs. The suitable HOMO and LUMO levels as well as excellent film forming properties make these molecules potential candidates for organic solar cells. Solution‐processed bulk heterojunction solar cells using these dendrimers as donor and [6,6]‐phenyl‐C₆₁ butyric acid methyl ester as acceptor are prepared and tested. The power conversion efficiency of the devices based on G0-4-2 is 0.40 % under illumination of air mass 1.5 and 100 mW cm^?2. This is the highest record value for OTV‐based materials to date. Although the absorption band of dendrimer G0-4-2 is much narrower than that of poly(3‐hexylthienylene vinylene) (P3HTV), the efficiency of its solar cell device is almost twice that of the device based on P3HTV. This result shows clearly the advantage of gradient dendritic structures as active materials for photovoltaic cells.     

UV‐photodimerization in uracil‐substituted dendrimers for high density data storage

Two series of uracil‐functionalized dendritic macromolecules based on poly (amidoamine) PAMAM and 2,2‐bis(hydroxymethylpropionic acid) bis‐MPA backbones were prepared and their photoinduced (2π+2π) cycloaddition reactions upon exposure to UV light at 257 nm examined. Dendrimers up to 4th generation were synthesized and investigated as potential materials for high capacity optical data storage with their dimerization efficiency compared to uracil as a reference compound. This allows the impact of increasing the generation number of the dendrimers, both the number of chromophores, as well as the different steric environments, on the performance of each series of dendrimers to be investigated. The (uracil)₁₂‐[G‐2]‐bis‐MPA and (uracil)₈‐[G‐1]‐PAMAM were observed to have high dimerization efficiency in solution with different behavior being observed for the PAMAM and bis‐MPA dendrimers. The dendrimers with the best dimerization efficiency in solution were then examined in the solid state as thin films cast on quartz plates, and their film qualities along with their photodimerization performance studied. High quality films with a transmission response of up to 70% in 55 s. when irradiated at 257 nm with an intensity of 70 mW/cm² could be obtained suggesting future use as recording media for optical data storage. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4401–4412, 2007     

Adhesive peptides conjugated PAMAM dendrimer as a coating polymeric material enhancing cell responses

This present work aims to functionalize poly(amidoamine) (PAMAM) dendrimers with various reported adhesive peptides, including Arg-Gly-Asp (RGD), Tyr-Ile-Gly-Ser-Arg (YIGSR), and Ile-Lys-Val-Ala-Val (IKVAV) for enhancing cell responses. The RGD, YIGSR, or IKVAV functionalized PAMAM coated substrate could promote cell adhesion of bone marrow mesenchymal stem cells (BMSCs) within 1 h after incubation. The neurite differentiation and proliferation of pheochromocytoma (PC12) cells were also significantly enhanced after culturing on the peptide functionalized PAMAM dendrimers for two and four days. This peptide functionalized PAMAM dendrimers are considered as the potential candidates for various tissue engineering applications.     

PAMAMOS: The first commercial silicon‐containing dendrimers and their applications

The world of dendrimers presently encompasses several thousands of publications, including scientific papers and patents, several hundreds of different compositions, but only a few commercially available families of products (i.e. polyamidoamines (PAMAMs), until recently polypropyleneimines, and phosphorus‐containing dendrimers) This is the story of PAMAMOS, which recently became the first commercially available silicon‐containing dendrimers, and how we journeyed from our initial idea to the point of their commercialization. It focuses on three unique features of these new dendrimers: their ability to form precisely defined nano‐structured, honeycomb‐like, 2D or 3D networks; the amazing usefulness of these networks for the preparation of a variety of nanocomplexes and nancomposites; and some of the new vistas that these materials open up for engineering nanotechnology applications. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2755–2773, 2006     

Comb‐Like Amphiphilic Polycarbonates with Different Lengths of Cationic Branches for Enhanced siRNA Delivery

Owing to the biodegradability and good biocompatibility polycarbonates show the versatile class of applications in biomedical fields. While their poor functional ability seriously limited the development of functional polycarbonates. Herein, a new Br‐containing cyclic carbonate (MTC‐Br) and a polycarbonate atom transfer radical polymerization (ATRP) macro‐initiator (PEG‐PMTC‐Br) is synthesized. Then, by initiating the side‐chain ATRP of 2‐(dimethyl amino)ethyl methacrylate (DMAEMA) on PEG‐PMTC‐Br, a series of comb‐like amphiphilic cationic polycarbonates, PEG‐b‐(PMTC‐g‐PDMAEMA) (GMDMs), with different lengths of cationic branches are successfully prepared. All these poly(ethylene glycol)‐b‐(poly((5‐methyl‐2‐oxo‐1,3‐dioxane‐5‐yl) methyl 2‐bromo‐2‐methylpropanoate/1,3‐dioxane‐2‐one)‐g‐poly(2‐dimethyl aminoethyl methacrylate) (GMDMs) self‐assembled nanoparticles (NPs) (≈180 nm, +40 mV) can well bind siRNA to form GMDM/siRNA NPs. The gene silence efficiency of GMDM/siRNA high to 80%, which is even higher than the commercial transfection reagent lipo2000 (76%). But GMDM/siRNA shows lower cell uptake than lipo2000. So, the high gene silence ability of GMDM/siRNA NPs can be attributed to the strong intracellular siRNA trafficking capacity. Therefore, GMDM NPs are potential siRNA vectors and the successful preparation of comb‐like polycarbonates also provides a facile way for diverse side‐chain functional polycarbonates, expanding the application of polycarbonates.     

Dendrimeric siRNA for Efficient Gene Silencing

Programmable molecular self‐assembly of siRNA molecules provides precisely controlled generation of dendrimeric siRNA nanostructures. The second‐generation dendrimers of siRNA can be effectively complexed with a low‐molecular‐weight, cationic polymer (poly(β‐amino ester), PBAE) to generate stable nanostructures about 160 nm in diameter via strong electrostatic interactions. Condensation and gene silencing efficiencies increase with the increased generation of siRNA dendrimers due to a high charge density and structural flexibility.     

Carbazole Dendrimers as Solution‐Processable Thermally Activated Delayed‐Fluorescence Materials

Recently, thermally activated delayed fluorescence (TADF) materials have received increasing attention as effective emitters for organic light‐emitting diodes (OLEDs). However, most of them are usually employed as dopants in a host material. In this report, carbazole dendrimers with a triphenyl‐s‐triazine core are reported, which are the first solution‐processable, non‐doped, high‐molecular‐weight TADF materials. The dendrimers were obtained by a new and facile synthetic route using the tert‐butyldimethylsilyl moiety as a protecting group. All dendrimers showed TADF in toluene. Measurements of the temperature‐dependent luminescence lifetime revealed that spin‐coated neat films also showed TADF with moderate quantum yields. OLED devices incorporating these dendrimers as spin‐coated emitting layers gave external quantum efficiencies of up to a 3.4 %, which suggests that this device is harvesting triplet excitons. This result indicates that carbazole dendrimers with attached acceptors are potential TADF materials owing to their polarized electronic structure (with HOMO–LUMO separation).     

Synthesis of poly(ester‐amide) dendrimers based on 2,2‐Bis(hydroxymethyl) propanoic acid and glycine

Water‐soluble, biodegradable, and biocompatible poly(ester‐amide) dendrimers with hydroxyl functional groups are synthesized from previously prepared AB₂ adduct of 2,2‐bis(hydroxymethyl) propanoic acid (bis‐MPA) and glycine as a repeating unit. Two esterification procedures using different coupling reagent/catalyst systems (DCC/DPTS or EDC/DMAP) are studied with respect to efficiency, ease of products purification, and quality of the final products. Both procedures have their own benefits and drawbacks, depending on dendrimer generation. The synthesized poly(ester‐amide) dendrimers as well as commercially available bis‐MPA dendrimers, poly(ester‐amide) hyperbranched polymer, and poly(vinyl alcohol) are used for preparation of solid dispersions of sulfonylurea antidiabetic drug glimepiride to improve its poor water‐solubility. In vitro dissolution studies show in comparison with pure glimepiride in crystalline or amorphous form, to the same extent improved glimepiride solubility for solid dispersions based on dendritic polymers, but not for poly(vinyl alcohol). The amount of glimepiride complexed with both dendrimer types increases with dendrimer generation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3292–3301     

Pendant polymer:amino-β-cyclodextrin:siRNA guest:host nanoparticles as efficient vectors for gene silencing

A novel siRNA delivery vector has been developed, based on the self-assembly of monosubstituted cationic β-CD derivatives with a poly(vinyl alcohol)MW27kD (PVA) main-chain polymer bearing poly(ethylene glycol)MW2000 (PEG) and acid-labile cholesterol-modified (Chol) grafts through an acid-sensitive benzylidene acetal linkage. These components were investigated for their ability to form nanoparticles with siRNA using two different assembly schemes, involving either precomplexation of the pendant Chol-PVA-PEG polymer with the cationic β-CD derivatives before siRNA condensation or siRNA condensation with the cationic β-CD derivatives prior to addition of Chol-PVA-PEG to engage host:guest complexation. The pendant polymer:amino-β-CD:siRNA complexes were shown to form nanoparticles in the size range of 120-170 nm, with a slightly negative zeta potential. Cell viability studies in CHO-GFP cells shows that these materials have 10(3)-fold lower cytotoxicities than 25 kD bPEI, while maintaining gene-silencing efficiencies that are comparable to those of benchmark transfection reagents such as bPEI and Lipofectamine 2000. These results suggest that the degradable Chol-PVA-PEG polymer is able to self-assemble in the presence of siRNA and cationic-β-CD to form nanoparticles that are an effective and low-toxicity vehicle for delivering siRNA cargo to target cells.     

PAMAM Dendrimers‐Based DNA Biosensors for Electrochemical Detection of DNA Hybridization

Gold electrodes were modified with submonolayers of mercaptoacetic acid (RSH) and further reacted with poly(amidoamine) (PAMAM) dendrimers (generation 4.0) to obtain thin films, on which DNA probe was later immobilized to afford a stable recognition layers. The characterization of the PAMAM/RSH‐modified electrode was investigated by cyclic voltammetry (CV) and electrochemical impedance measurement. Differential pulse voltammogram (DPV) measurement was used to monitor DNA hybridization with daunomycin (DNR) as indicator. Experiments carried out with these novel materials not only showed an improved DNA attachment quantity on the dendrimers‐modified electrodes compared to DNA sensors with oligonucleotides directly immobilized on Au electrodes, but also exhibited a high selectivity, sensitivity and stability for the measurement of DNA hybridization.     

Theoretical and experimental characterization of amino‐PEG‐phosphonate‐terminated Polyphosphorhydrazone dendrimers: Influence of size and PEG capping on cytotoxicity profiles

The synthesis of new series of PPH (poly(phosphorhydrazone)) dendrimers with amino‐PEG phosphonates or the corresponding amino‐PEG phosphonic acids as terminal groups is presented, from generations 1–3. The size of PEG‐terminated dendrimers is experimentally measured by diffusional NMR, and by means of dynamic light scattering. Classical molecular dynamics and well‐tempered metadynamics simulations are used to assess or confirm the formation of aggregates in some cases. The influence of PEG capping on the cytotoxicity profiles of the dendrimers is evaluated on human peripheral blood mononuclear cells by means of LIVE/DEAD assays, and confirms the importance of PEG capping to ensure low cytotoxicity. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 761–774     

N‐Boc‐Protected 1,2‐Diphenylethylenediamine‐Based Dendritic Organogels with Multiple‐Stimulus‐Responsive Properties

A new class of poly(benzyl ether) dendrimers, decorated in their cores with N‐Boc‐protected 1,2‐diphenylethylenediamine groups, were synthesized and fully characterized. It was found that the gelation capability of these dendrimers was highly dependent on dendrimer generation, and the second‐generation dendrimer (R,R)‐G₂DPENBoc proved to be a highly efficient organogelator. A number of experiments (SEM, TEM, FTIR spectroscopy, ¹H NMR spectroscopy, rheological measurements, UV/Vis absorption spectroscopy, CD, and XRD) revealed that these dendritic molecules self‐assembled into elastically interpenetrating one‐dimensional nanostructures in organogels. The hydrogen bonding, π–π, and solvophobic interactions were found to be the main driving forces for formation of the gels. Most interestingly, these dendritic organogels exhibited smart multiple‐stimulus‐responsive behavior upon exposure to environmental stimuli such as temperature, anions, and mechanical stress.     

Preparation of poly(ethylene glycol)-modified poly(amido amine) dendrimers encapsulating gold nanoparticles and their heat-generating ability

Loading of HAuCl4 in poly(amido amine) G4 dendrimers having poly(ethylene glycol) (PEG) grafts at all chain ends and subsequent reduction with NaBH4 yielded PEG-modified dendrimers encapsulating gold nanoparticles (Au NPs) of ca. 2 nm diameter. The Au NPs held in the dendrimers were stable in aqueous solutions and dissolved readily, even after freeze-drying. Despite their small particle size, the heat-generating ability of Au NPs held in the dendrimer was comparable to that of widely used Au NPs with ca. 11 nm diameter under visible light irradiation. The observed excellent colloidal stability, high heat-generating ability and their biocompatible surface confirm that the PEG-modified dendrimers encapsulating Au NPs are a promising tool for photothermal therapy and imaging.     

Self‐assembly of a new class of amphiphilic poly(amidoamine) dendrimers and their electrochemical properties

Amphiphilic poly(amidoamine) (PAMAM) dendrimers consisting of a hydrophilic dendrimer core and hydrophobic aromatic dansyl or 1‐(naphthalenyl)‐2‐phenyldiazene (NPD) shells have been synthesized. These amphiphilic dendrimers from the zero generation to the third generation self‐assemble into vesicular aggregates in water. The self‐assembly behavior of these dendrimers strongly depends on their generations. The generation dependence has been further investigated by an exploration of their electrochemical properties. For the PAMAM–NPD aggregates, the photoisomerization process leads to a change in the aggregate size. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5512–5519, 2005     

Polyamidoamine dendrimers surface-engineered with biomimetic phosphorylcholine as potential drug delivery carriers

Biomimetic acryloyloxyethyl phosphorylcholine (APC) was used to react with generation 5 poly(amido amine) (PAMAM) dendrimers (G5) via the Michael addition reaction between primary amino group of PAMAM dendrimers and acrylic functional group of APC. FTIR and (1)H NMR confirmed the success of surface modification of G5. The primary amino and phosphorylcholine (PC) group numbers of the surface engineered PAMAM dendrimers (G5-PC) were calculated to be 56 and 50 via (1)H NMR and potentiometric titration. Cell viability and cell morphology studies indicated that biomimetic phosphorylcholine surface engineering successfully lowered the cytotoxicity of G5 PAMAM dendrimers. The hydrophobic interior of G5-PC was used to incorporate anti-cancer drug Adriamycin (ADR) and the G5-PC showed sustained releasing behavior for ADR. Cell morphology and viability tests indicated that the drug-loaded G5-PC conjugate could effectively enter the cancer cells and inhibit the growth of cancer cells. Biomimetic phosphorylcholine surface engineered PAMAM dendrimers with lowered cytotoxicity and high cellular penetrating ability showed great potential for the biomedical applications as nanocarrier system.     

Dendrimers as potential drug carriers; encapsulation of acidic hydrophobes within water soluble PAMAM derivatives

This paper describes the synthesis of three neutral water soluble poly(amidoamine) (PAMAM) dendrimer derivatives. The ability of the two larger dendrimers to bind small acidic hydrophobic molecules is reported. Spectroscopic data and pH behaviour suggested that the acidic hydrophobes were forming stable ion pairs with the dendrimer's internal, basic tertiary nitrogens. With respect to forming 1:1 and 2:1 substrate/dendrimer complexes, both of the larger dendrimers were equally efficient at binding. All dendrimer/substrate complexes were completely miscible with water in all proportions (i.e. infinitely water soluble). When the bound substrates are drug moieties, then the resulting complexes could be considered as potential drug delivery systems. Flow calorimetry demonstrated that the dendrimers were able to release their hydrophobic guests when in contact with a biological cell.     

PAMAM Dendrimers for siRNA Delivery: Computational and Experimental Insights

Short double‐stranded RNAs, which are known as short interfering RNA (siRNA), can be used to specifically down‐regulate the expression of the targeted gene in a process known as RNA interference (RNAi). However, the success of gene silencing applications based on the use of synthetic siRNA critically depends on efficient intracellular delivery. Polycationic branched macromolecules such as poly(amidoamine) (PAMAM) dendrimers show a strong binding affinity for RNA molecules and, hence, can provide an effective, reproducible, and relatively nontoxic method for transferring siRNAs into animal cells. Notwithstanding these perspectives, relatively few attempts have been made so far along these lines to study in detail the molecular mechanisms underlying the complexation process between PAMAMs and siRNAs. In this work we combine molecular simulation and experimental approaches to study the molecular requirements of the interaction of RNA‐based therapeutics and PAMAM dendrimers of different generations. The dendrimers and their siRNA complexes were structurally characterized, and the free energy of binding between each dendrimer and a model siRNA was quantified by using the well‐known MM/PBSA approach. DOSY NMR experiments confirmed the structural in silico prediction and yielded further information on both the complex structure and stoichiometry at low N/P ratio values. siRNA/PAMAM complex formation was monitored at different N/P ratios using gel retardation assays, and a simple model was proposed, which related the amount of siRNA complexed to the entropy variation upon complex formation obtained from the computer simulations.     

Left‐Right Symmetry or Asymmetry of Cells on Stripe‐Like Micropatterned Material Surfaces

Material surfaces can induce cell responses such as contact guidance, yet little attention has been paid to further cell orientation. Herein, we report an interesting phenomenon of cell orientation beyond the classic contact guidance on a stripe‐like micropattern with cell‐adhesive arginine‐ glycine‐aspartate (RGD) peptides on a nonfouling background decorated by poly(ethylene glycol) (PEG). Such a micropattern with cell adhesion contrast led to significant contact guidance after cell seeding. What is more, the localized and elongated cells were found to be further orientated out of the adhesive stripes, and even an anticlockwise rotation was observed for rat mesenchymal stem cells (rMSCs). The left‐right asymmetry of rMSCs stood only in statistics, for we observed all cases including clockwise orientation, anticlockwise orientation or just keeping the orientation of previous contact guidance. We further found that human foreskin fibroblasts (HFFs) preferred a clockwise rotation, while human mesenchymal stem cells (hMSCs) and human umbilical vascular endothelial cells (HUVECs) exhibited no significant preference to either direction, which indicated that the left‐right symmetry or asymmetry was cell‐type dependent. The present report has partially confirmed the cell chirality and revealed its complexity, calling for further careful and comprehensive investigation of the challenging topic of cell chirality on material surfaces.     

Design,Synthesis, and Self‐Assembly Behavior of Liquid‐Crystalline Bis‐[60]Fullerodendrimers

Bis‐[60]fullerodendrimers were synthesized by assembling [60]fullerene‐containing type I (terminal olefin) and type II (α,β‐unsaturated carbonyl olefin) olefins through the olefin cross‐metathesis reaction. The synthetic modular approach developed in this study allowed the preparation of mono‐[60]fullerodendrimers and their [60]fullerene‐free analogues. First‐ and second‐generation poly(aryl ester) dendrons carrying cyanobiphenyl mesogens were used as liquid‐crystalline promoters. The liquid‐crystalline properties were studied by polarized optical microscopy, differential scanning calorimetry, and small‐angle X‐ray scattering. In agreement with the nature and structure of the dendrimers, nematic, smectic, and multisegregated lamellar phases were observed. Owing to its versatility and tolerance towards many functional groups, olefin cross‐metathesis proved to be a reaction of choice for the elaboration of molecular materials with complex architectures.