Synthesis of Stereoblock Elastomeric Poly(propylene)s Using a (2‐PhInd)2ZrCl2 Metallocene Catalyst in the Presence of Co‐Catalyst Mixtures: Study of Activity and Molecular Weight

The effect of adding various aluminum alkyls (R = Et, i‐Bu) on the polymerization of propylene is studied using a (2‐PhInd)₂ZrCl₂ pre‐catalyst. A mild deactivating effect is found upon addition of TIBA, whereas TEA shows a sharp deactivating effect. Increasing amounts of AlR₃ results in a significant activity increase for TIBA, but an activity plateau for TEA. AlR₃ imposes remarkably different effects on the molecular weight and stereochemical microstructure of polymers. As the TIBA concentration increases, $\overline {M} _{{\rm v}} $ increases at first, growing from 49 000 to 72 000, but subsequently drops to 40 000. For TEA, $\overline {M} _{{\rm v}} $ decreases sharply, plummeting from 49 000 to 17 000. Both TIBA and TEA increase the mmmm pentad content from 7.9 to 23.5% and 17.6%, respectively.

     

Highly Efficient Au/TiO2 Catalyst for One‐pot Conversion of Nitrobenzene to p‐Aminophenol in Water Media

Au/TiO₂ catalyst is firstly reported to be efficient in the hydrogenation of nitrobenzene to produce p‐aminophenol with a high PAP selectivity of 81% and overall yield more than 63%. The catalyst is also quite stable and can be reused for at least 4 times with only slight decrease in activity.     

Photocatalytic Activity of Fe and Ce Co‐doped Mesoporous TiO2 Catalyst under UV and Visible Light

The catalysts of un‐doped, single‐doped and co‐doped mesoporous titanium dioxide (MTiO₂) were prepared by a template method with tetrabutyltitanate (Ti(OC₄H₉)₄) as a Ti source material and Pluronic P123 as a template. The photo‐absorbance of the obtained catalysts was measured by UV‐vis absorption spectroscopy, and the photocatalytic activities of the prepared samples under UV and visible light were estimated by measuring the degradation rate of methyl orange (MO) (50 mg/L) in an aqueous solution. It was shown that the co‐doped MTiO₂ could be activated by visible light and could thus be used as an effective catalyst in photo‐oxidation reactions. The effect of Fe and Ce co‐dopants on the material properties was investigated by X‐ray diffraction (XRD), scanning electron microscopy (SEM) and N₂ adsorption‐desorption isotherm measurement. The characterizations indicated that the photocatalysts possessed a homogeneous pore diameter of ca. 10 nm with high surface area of ca. 150 m²/g. The photocatalytic activity of MTiO₂ co‐doped with Fe and Ce was markedly improved due to the synergistic actions of the two dopants.     

Band‐Structure Engineering of ZnO by Anion–Cation Co‐Doping for Enhanced Photo‐Electrochemical Activity

To look for efficient visible light‐driven catalysts for photo‐electrochemical (PEC) water‐splitting, the band structure and optical absorption of monodoped, compensated, and noncompensated n–p pairs of co‐doped bulk ZnO are systemically studied by using both general gradient approximation and hybrid density functional theory approaches (PBE and HSE). Calculations show that n–p co‐doping cannot only enhance the stability that stems from the strong electrostatic attraction between the n‐ and p‐type dopants, but also effectively reduce the band‐gap of ZnO. More importantly, compensated (Ti+C) and noncompensated (Sc+C) and (Cr+C) co‐doped ZnO may be compelling candidates for PEC water‐splitting because of their narrowed band‐gaps, potentially reduced electron–hole recombination centers, appropriate band‐edge positions, enhanced optical absorption, and good stability.     

Stable Co‐Catalyst‐Free Photocatalytic H2 Evolution From Oxidized Titanium Nitride Nanopowders

A simple strategy is used to thermally oxidize TiN nanopowder (～20 nm) to an anatase phase of a TiO₂:Ti³⁺:N compound. In contrast to the rutile phase of such a compound, this photocatalyst provides activity for hydrogen evolution under AM1.5 conditions, without the use of any noble metal co‐catalyst. Moreover the photocatalyst is active and stable over extended periods of time (tested for 4 months). Importantly, to achieve successful conversion to the active anatase polymorph, sufficiently small starting particles of TiN are needed. The key factor for catalysis is the stabilization of the co‐catalytically active Ti³⁺ species against oxidation by nitrogen present in the starting material.     

硼铈共掺杂纳米TiO2光催化降解三氯杀螨醇和菊酯类农药

采用溶胶-凝胶法在钛酸丁酯水解过程引入硼酸、硝酸铈,制备具有光催化活性的硼铈共掺杂纳米二氧化钛（TiO2）,经XRD、TEM、FT-IR、UV-Vis-DRS表征晶体结构,在日光灯照射下,光催化降解三氯杀螨醇、高氟氯氰菊酯、氟戊菊酯农药。结果表明：硼铈共掺杂的TiO2只有锐钛矿型,而纯的或掺铈的TiO2有含有锐钛矿型、金红石相和少量板钛矿型,UV-Vis-DRS测定结果表明硼铈共掺杂的TiO2禁带宽度变小,硼铈共掺杂的TiO2在可见光区吸光度高于掺杂铈和不掺杂的TiO2,在420nm~850nm有强的吸收;在同样光照下对三氯杀螨醇、高氟氯氰菊酯、氟戊菊酯的降解试验证明硼铈共掺杂纳米TiO2的光催化活性高于不掺杂或只掺杂铈的TiO2。     

gem‐Dimethyl‐bearing C‐Glucosides as Sodium‐glucose Co‐transporter 2 (SGLT2) Inhibitors

Three novel gem‐dimethyl C‐glucosides were designed as sodium‐glucose co‐transporter 2 (SGLT2) inhibitors, and their syntheses started from D‐glucose and three 2‐substituted‐5‐bromobenzoic acids were achieved via a facile 8‐step protocol, with the key step being anhydrous aluminum chloride‐catalyzed Friedel‐Crafts alkylation of tertiary alcohols and phenetol. These three SGLT2 inhibitors were evaluated in vivo with a mice oral glucose tolerance test (OGTT), and the anti‐hyperglycemic activities of all these three compounds were comparable with that of the positive control Dapagliflozin.     

Surface and Structural Investigation of a MnOx Birnessite‐Type Water Oxidation Catalyst Formed under Photocatalytic Conditions

Catalytically active MnO_x species have been reported to form in situ from various Mn‐complexes during electrocatalytic and solution‐based water oxidation when employing cerium(IV) ammonium ammonium nitrate (CAN) oxidant as a sacrificial reagent. The full structural characterization of these oxides may be complicated by the presence of support material and lack of a pure bulk phase. For the first time, we show that highly active MnO_x catalysts form without supports in situ under photocatalytic conditions. Our most active ⁴MnO_x catalyst (～0.84 mmol O₂ mol Mn^?1 s^?1) forms from a Mn₄O₄ bearing a metal–organic framework. ⁴MnO_x is characterized by pair distribution function analysis (PDF), Raman spectroscopy, and HR‐TEM as a disordered, layered Mn‐oxide with high surface area (216 m²g^?1) and small regions of crystallinity and layer flexibility. In contrast, the ^SMnO_x formed from Mn²⁺ salt gives an amorphous species of lower surface area (80 m²g^?1) and lower activity (～0.15 mmol O₂ mol Mn^?1 s^?1). We compare these catalysts to crystalline hexagonal birnessite, which activates under the same conditions. Full deconvolution of the XPS Mn2p_3/2 core levels detects enriched Mn³⁺ and Mn²⁺ content on the surfaces, which indicates possible disproportionation/comproportionation surface equilibria.     

Electrodeposited Amorphous Tungsten‐doped Cobalt Oxide as an Efficient Catalyst for the Oxygen Evolution Reaction

Thin film of amorphous tungsten‐doped cobalt oxide (W:CoO) was successfully grown on a conducting electrode via an electrochemical oxidation process employing a [Co(WS₄)₂]^2? deposition bath. The W:CoO catalyst displays an attractive performance for the oxygen evolution reaction in an alkaline solution. In an NaOH solution of pH 13, W:CoO operates with a moderate onset overpotential of 230 mV and requires 320 mV overpotential to generate a catalytic current density of 10 mA cm^?2. A low Tafel slope of 45 mV decade^?1 was determined, indicating a rapid O₂‐evolving kinetics. The as‐prepared W:CoO belongs to the best cobalt oxide‐based catalysts ever reported for the oxygen evolution (OER) reaction.     

Molecular‐Level Understanding of the Photocatalytic Activity Difference between Anatase and Rutile Nanoparticles

The generation of oxidants on illuminated photocatalysts and their participation in subsequent reactions are the main basis of the widely investigated photocatalytic processes for environmental remediation and selective oxidation. Here, the generation and the subsequent diffusion of ^.OH from the illuminated TiO₂ surface to the solution bulk were directly observed using a single‐molecule detection method and this molecular phenomenon could explain the different macroscopic behavior of anatase and rutile in photocatalysis. The mobile ^.OH is generated on anatase but not on rutile. Therefore, the photocatalytic oxidation on rutile is limited to adsorbed substrates whereas that on anatase is more facile and versatile owing to the presence of mobile ^.OH. The ability of anatase to generate mobile ^.OH is proposed as a previously unrecognized key factor that explains the common observations that anatase has higher activity than rutile for many photooxidative reactions.     

Nanowires Formed by the Co‐Assembly of a Negatively Charged Low‐Molecular Weight Gelator and a Zwitterionic Polythiophene

Conjugated organic nanowires have been prepared by co‐assembling a carboxylate containing low‐molecular weight gelator (LMWG) and an amino acid substituted polythiophene derivative (PTT). Upon introducing the zwitterionic polyelectrolyte PTT to a basic molecular solution of the organogelator, the negative charges on the LMWG are compensated by the positive charges of the PTT. As a result, nanowires form through co‐assembly. These nanowires are visualized by both transmission electron microscopy (TEM) and atomic force microscopy (AFM). Depending on the concentration and ratio of the components these nanowires can be micrometers long. These measurements further suggest that the aggregates adopt a helical conformation. The morphology of these nanowires are studied with fluorescent confocal laser scanning microscopy (CLSM). The interactions between LMWG and PTT are characterized by steady‐state and time‐resolved fluorescence spectroscopy studies. The steady‐state spectra indicate that the backbone of the PTT adopts a more planar and more aggregated conformation when interacting with LMWG. The time‐ resolved fluorescence decay studies confirm this interpretation.     

A Dewetted‐Dealloyed Nanoporous Pt Co‐Catalyst Formed on TiO2 Nanotube Arrays Leads to Strongly Enhanced Photocatalytic H2 Production

Pt nanoparticles are typically decorated as co‐catalyst on semiconductors to enhance the photocatalytic performance. Due to the low abundance and high cost of Pt, reaching a high activity with minimized co‐catalyst loadings is a key challenge in the field. We explore a dewetting‐dealloying strategy to fabricate on TiO₂ nanotubes nanoporous Pt nanoparticles, aiming at improving the co‐catalyst mass activity for H₂ generation. For this, we sputter first Pt‐Ni bi‐layers of controllable thickness (nm range) on highly ordered TiO₂ nanotube arrays, and then induce dewetting‐alloying of the Pt‐Ni bi‐layers by a suitable annealing step in a reducing atmosphere: the thermal treatment causes the Pt and Ni films to agglomerate and at the same time mix with each other, forming on the TiO₂ nanotube surface metal islands of a mixed PtNi composition. In a subsequent step we perform chemical dealloying of Ni that is selectively etched out from the bimetallic dewetted islands, leaving behind nanoporous Pt decorations. Under optimized conditions, the nanoporous Pt‐decorated TiO₂ structures show a>6 times higher photocatalytic H₂ generation activity compared to structures modified with a comparable loading of dewetted, non‐porous Pt. We ascribe this beneficial effect to the nanoporous nature of the dealloyed Pt co‐catalyst, which provides an increased surface‐to‐volume ratio and thus a more efficient electron transfer and a higher density of active sites at the co‐catalyst surface for H₂ evolution.     

Preparation and Photocatalytic Activity of Mesoporous TiO2 Photocatalyst Co‐doped with Fe and H3PW12O40

The mesoporous titanium dioxide (MTiO₂) photocatalysts co‐doped with Fe and H₃PW₁₂O₄₀ were synthesized by template method using tetrabutyl titanate (Ti(OC₄H₉)₄), Fe(NO₃)k₃9H₂Oand H₃PW₁₂O₄₀ as precursors and Pluronic P123 as template. The as‐prepared photocatalyst was characterized by N₂ adsorption‐desorption measurements, X‐ray diffraction (XRD), scanning electron microscopy (SEM) and UV‐vis adsorption spectroscopy, and the photocatalytic activities of the prepared samples under UV and visible light were estimated by measuring the degradation rate of methyl blue (MB) (50 mg/L) in an aqueous solution. The characterizations indicated that the photocatalysts possessed a homogeneous pore diameter of ca. 10 nm with high surface area of ca. 150 m²/g. The results of MB photodecomposition showed that co‐doped mesoporous TiO₂ exhibited higher photocatalytic activities than un‐doped, single‐doped mesoporous TiO₂ under UV and visible light irradiation. It was shown that the co‐doped MTiO₂ could be activated by visible light and could thus be used as an effective catalyst in photo‐oxidation reactions. The synergistic effect of Fe and H₃PW₁₂O₄₀ co‐doping played an important role in improving the photocatalytic activity.     

TiO2光催化还原CO2

光催化还原CO₂技术在CO₂的治理与利用方面有着潜在的应用价值和良好的开发前景。该文简要综述了近年来用于光催化还原CO₂反应的TiO₂光催化剂材料,包括纯TiO₂催化剂、负载型TiO₂催化剂、金属改性TiO₂催化剂、半导体复合TiO₂催化剂和有机光敏化TiO₂催化剂等,并介绍了各类催化剂光催化还原CO₂的反应性能。     

Two‐dimensional Fourier transform infrared spectroscopy study of biosynthesized poly(hydroxybutyrate‐co‐hydroxyhexanoate) and poly(hydroxybutyrate‐ co‐hydroxyvalerate)

Generalized two‐dimensional (2D) Fourier transform infrared correlation spectroscopy was used to investigate the effect of the comonomer compositions on the crystallization behavior of two types of biosynthesized random copolymers, poly(hydroxybutyrate‐co‐hydroxyhexanoate) and poly(hydroxybutyrate‐co‐hydroxyvalerate). The carbonyl absorption band around 1730 cm^?1 was sensitive to the degree of crystallinity. 2D correlation analysis demonstrated that the 3‐hydroxyhexanoate units preferred to remain in the amorphous phase of the semicrystalline poly(hydroxybutyrate‐co‐hydroxyhexanoate) copolymer, resulting in decreases in the degree of crystallinity and the rate of the crystallization process. The poly(hydroxybutyrate‐co‐hydroxyvalerate) copolymer maintained a high degree of crystallinity when the 3‐hydroxyvalerate fraction was increased from 0 to 25 mol % because of isodimorphism. The crystalline and amorphous absorption bands for the carbonyl bond for this copolymer, therefore, changed simultaneously. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 649–656, 2002; DOI 10.1002/polb.10126     

一步法制备二氧化钛-金复合材料及其光解水制氢性能

以钛粉为还原剂,氯金酸为氧化剂,将二者在180 ℃水热反应釜中发生氧化还原反应,最终生成直径800 nm左右的TiO₂,比表面积为3.5 m²/g左右,其表面均匀担载了直径20 nm左右的金纳米颗粒。 采用X射线衍射(XRD)、场发射扫描电子显微镜(FE-SEM)、X射线光电子能谱分析(XPS)、紫外可见漫反射光谱、光电流密度、光催化制氢性能等测试表征了该复合催化剂的结构及性能。 结果表明,一步法制备的复合催化剂形貌规整,TiO₂为锐钛矿晶型,金纳米颗粒的局域表面等离子体共振(LSPR)作用促进了催化剂对可见光有较强的吸收,催化剂催化产氢性能伴随金含量增大存在先增后减规律,可见光下最大产氢速率为0.1 μmol/(g·h),光催化活性表现稳定。     

Mechanistic Aspects of a Highly Active Dinuclear Zinc Catalyst for the Co‐polymerization of Epoxides and CO2

The dinuclear zinc complex reported by us is to date the most active zinc catalyst for the co‐polymerization of cyclohexene oxide (CHO) and carbon dioxide. However, co‐polymerization experiments with propylene oxide (PO) and CO₂ revealed surprisingly low conversions. Within this work, we focused on clarification of this behavior through experimental results and quantum chemical studies. The combination of both results indicated the formation of an energetically highly stable intermediate in the presence of propylene oxide and carbon dioxide. A similar species in the case of cyclohexene oxide/CO₂ co‐polymerization was not stable enough to deactivate the catalyst due to steric repulsion.