Initiation of free‐radical polymerization by peroxypivalates studied by electrospray ionization mass spectrometry

Initiation by tert‐butyl peroxypivalate (TBPP), tert‐amyl peroxypivalate (TAPP), 1,1,3,3‐tetramethylbutyl peroxypivalate (TMBPP), or 1,1,2,2‐tetramethylpropyl peroxypivalate (TMPPP) of radical polymerization of methyl methacrylate in toluene solution at 90 °C was studied via polymer end‐group analysis using electrospray ionization mass spectrometry (ESI‐MS). Conclusive peak assignments allowed for measuring the type and concentration of the fragments that actually initiate macromolecular growth after thermal decomposition of these peroxypivalates. It was found that the pivaloyloxy radical moiety undergoes instantaneous decarboxylation to yield an initiating tert‐butyl radical. The alkoxy radical moiety, on the other hand, may generate, via β‐scission reaction, different types of carbon‐centered radicals (together with a ketone) or may undergo a 1,5‐H‐shift reaction, by which reaction an oxygen‐centered radical is transformed into a carbon‐centered hydroxy radical. This hydrogen shift reaction was found in case of TMBPP. Surprisingly, no evidence for initiating alkoxy radicals could be found, not even in case of initiation by TBPP, where the intermediate tert‐butoxy radical undergoes a rapid chain‐transfer reaction with the solvent toluene. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4266–4275, 2004     

Theoretical Study on Reactivity of Electron Transfer in Model—System of Oxidation of α—Amino Carbon—centered Radical by O2

Electron transfer reaction between a simplified model model molecule of α－amino carbon-centered radical and O2 has studied with ab initio calculations at the MP2/6-31 G^**//UHF/6-31 G^** level,The reactant complex and the ion pair complex have been optimized and employed to perform calculation of the reaction heat and the reorganization energy,Solvent effects have been considered by applyning the conductor-like screening model,Theoretical results show that the highly endothermic charge separation process ,in which one electron transfers from the α－amino carbon-centered radical to O2,so as to form an ion pair complex,is difficult to occur in gas-phase,By apply-ing an external electronic field to prepare the charge-locallized molecular orbitals,the charge-separated state has been obtained using the initial-guess-induced self-consistent field technique,The theoretical investigations indicate that the solvent effect in the process of the oxidation of α-animo carbon-centered radical by O2 is remarkable.From the rate constant estima-tion ,it can be predicted that the oxidation of the model donor molecule by O2 can proceed,but not very fast.A peroxyl radi-cal compound has been found to be a competitive intermediate in the oxidation process.     

Theoretical Study on Electron Transfer Matrix Element in Oxidation of α—Amino Carbon—Centered Radical by O2

As a successive work of our previous paper,^1the electron transfer matrix element(Vrp)in the oxidation of the simplified model molecule of α-amino carbon-centered radical by O2 has been investigated with ab initio calculation at the level of UHF/6-31 G**.Based on the optimized geometries of the reactgant and the ion-pair complex obtained previously,the reaction heat and the iuner reorganization energy have been obtained by constructing the potential energy curves of reactant and product states considering the solvent effect with the conductor-like screening model(COSMO).The solvent reorganization energy has been estimated using Lippert-Mataga relationship.The calculated results show that the value of Vrp is several times larger than that of RT,which means that the model reaction is an adiabatic one.Theoretical investigation indicates that the solvent effect on the direct electron transfer (ET) process of oxidation of α-amino carbon-centered radical by oxygen is remarkable.     

Reaction control in radical polymerization of di‐n‐butyl itaconate utilizing a hydrogen‐bonding interaction

We have reported that intramolecular chain‐transfer reaction takes place in radical polymerization of itaconates at high temperatures and/or at low monomer concentrations. In this article, radical polymerizations of di‐n‐butyl itaconate (DBI) were carried out in toluene at 60 °C in the presence of amide compounds. The ¹³C‐NMR spectra of the obtained poly(DBI)s indicated that the intramolecular chain‐transfer reaction was suppressed as compared with in the absence of amide compounds. The NMR analysis of DBI and N‐ethylacetamide demonstrated both 1:1 complex and 1:2 complex were formed at 60 °C through a hydrogen‐bonding interaction. The ESR analysis of radical polymerization of diisopropyl itaconate (DiPI) was conducted in addition to the NMR analysis of the obtained poly(DiPI). It was suggested that the suppression of the intramolecular chain‐transfer reaction with the hydrogen‐bonding interaction was achieved by controlling the conformation of the side chain at the penultimate monomeric unit of the propagating radical with an isotactic stereosequence. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4895–4905, 2004     

New Methacryloxy N‐Vinyl‐2‐pyrrolidinone‐ and Lactone‐Based Macromers

New ω‐methacryloxy‐terminated N‐vinyl‐2‐pyrrolidinone oligomers were prepared by reaction of the corresponding ω‐hydroxy‐terminated N‐vinyl‐2‐pyrrolidinone oligomers with 2‐[(1‐imidazolyl)formyloxy] ethyl methacrylate (HEMA‐Im). The oligomeric precursor had been obtained by radical chain transfer polymerization making use of isopropoxyethanol as a solvent and a chain transfer agent. α,ω‐Dimethacryloxy‐terminated ε‐caprolactone and δ‐valerolactone oligomers were also prepared by reaction of their α‐hydroxy‐ω‐methacryloxy‐terminated precursors with HEMA‐Im. These had been in turn synthesized by ring‐opening polymerization of the corresponding lactones in the presence of 2‐hydroxyethyl methacrylate as the initiator and tin octanoate as the catalyst. Due to the presence of methacrylic functions at their chain ends, both VP and lactone oligomers participate in radical polymerization reactions and can be therefore classified as radical macromers. Both macromer families have several potential applications, such as use in the synthesis of mixed hydrophilic/hydrophobic hydrogels. All macromers were characterized by NMR spectroscopy and size‐exclusion chromatography (SEC). The polymerization kinetics of the lactone macromers were also analyzed by ¹H NMR spectroscopy.     

Preparation of poly(styrene‐co‐acrylonitrile)‐grafted multiwalled carbon nanotubes via surface‐initiated atom transfer radical polymerization

The in situ grafting‐from approach via atom transfer radical polymerization was successfully applied to polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile grafted onto the convex surfaces of multiwalled carbon nanotubes (MWCNTs) with (2‐hydroxyethyl 2‐bromoisobutyrate) as an initiator. Thermogravimetric analysis showed that effective functionalization was achieved with the grafting approach. The grafted polymers on the MWCNT surface were characterized and confirmed with Fourier transform infrared spectroscopy and nuclear magnetic resonance. Raman and near‐infrared spectroscopy revealed that the grafting of polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile slightly affected the side‐wall structures. Field emission scanning electron microscopy showed that the carbon nanotube surface became rough because of the grafting of the polymers. Differential scanning calorimetry results indicated that the polymers grafted onto MWCNTs showed higher glass‐transition temperatures. The polymer‐grafted MWCNTs exhibited relatively good dispersibility in an organic solvent such as tetrahydrofuran. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 460–470, 2007     

Symmetry‐Driven Strategy for the Assembly of the Core Tetracycle of (+)‐Ryanodine: Synthetic Utility of a Cobalt‐Catalyzed Olefin Oxidation and α‐Alkoxy Bridgehead Radical Reaction

Ryanodine ( 1 ) is a potent modulator of intracellular calcium release channels, designated as ryanodine receptors. The exceptionally complex molecular architecture of 1 comprises a highly oxygenated pentacyclic system with eleven contiguous stereogenic centers, which makes it a formidable target for organic synthesis. We identified the embedded C₂‐symmetric tricyclic substructure within 1 . This specific recognition permitted us to design a concise synthetic route to enantiopure tricycle 9 by utilizing a series of pairwise functionalizations. The four tetrasubstituted carbon centers of 9 were effectively constructed by three key reactions, a dearomatizing Diels–Alder reaction, the kinetic resolution of the obtained racemic 14 through asymmetric methanolysis, and the transannular aldol reaction of the eight‐membered diketone 10 . A new combination of cobalt‐catalyzed hydroperoxidation and NfF‐promoted elimination enabled conversion of the hindered olefin of 9 into the corresponding ketone, thus realizing the desymmetrization. Finally, the tetrasubstituted carbon was stereospecifically installed by utilizing the α‐alkoxy bridgehead radical to deliver the core tetracycle 7 with the six contiguous tetrasubstituted carbon centers. Consequently, the present work not only accomplishes efficient assembly of four out of the five fused rings of 1 , but also develops two new powerful methodologies: two‐step ketone formation and bridgehead radical reaction.     

Radical trans‐Hydroboration of Alkynes with N‐Heterocyclic Carbene Boranes

Hydroboration of internal alkynes with N‐heterocyclic carbene boranes (NHC‐boranes) occurs to provide stable NHC (E)‐alkenylboranes upon thermolysis in the presence of di‐tert‐butyl peroxide. The E isomer results from an unusual trans‐hydroboration, and the E/Z selectivity is typically high (90:10 or greater). Evidence suggests that this hydroboration occurs by a radical‐chain reaction involving addition of an NHC‐boryl radical to an alkyne to give a β‐NHC‐borylalkenyl radical. Ensuing hydrogen abstraction from the starting NHC‐borane provides the product and returns the starting NHC‐boryl radical. Experiments suggest that the observed trans‐selectivity results from kinetic control in the hydrogen‐transfer reaction.     

Enantioselective Catalytic Aldehyde α‐Alkylation/Semipinacol Rearrangement: Construction of α‐Quaternary‐δ‐Carbonyl Cycloketones and Total Synthesis of (+)‐Cerapicol

An enantioselective aldehyde α‐alkylation/semipinacol rearrangement was achieved through organo‐SOMO catalysis. The catalytically generated enamine radical cation serves as a carbon radical electrophile that can stereoselectively add to the alkene of an allylic alcohol and initiate ensuing ring‐expansion of cyclopropanol or cyclobutanol. This tandem reaction enables the production of a wide range of nonracemic functionalizable α‐quaternary‐δ‐carbonyl cycloketones in high yields and excellent enantioselectivity from simple aldehydes and allylic alcohols. As a key step, the intramolecular reaction was also successfully applied in the asymmetric total synthesis of (+)‐cerapicol.     

Hydrogen‐transfer reaction in nitroxide mediated polymerization of methyl methacrylate: 2,2‐Diphenyl‐3‐phenylimino‐2,3‐dihydroindol‐1‐yloxyl nitroxide (DPAIO) vs. TEMPO

In a recent article, we have showed that the nitroxide mediated polymerization of methyl methacrylate was possible up to 80% conversion for reasonable masses M_n = 60,000 g mol^?1 when 2,2‐diphenyl‐3‐phenylimino‐2,3‐dihydroindol‐1‐yloxyl nitroxide (DPAIO) was used as control agent. We have claimed that the success of this experiment relied on the absence of H‐transfer reaction both in the alkoxyamine and between alkyl and nitroxyl radical. In this article, the decomposition of 4‐nitrophenyl 2‐(2,2,6,6‐tetramethylpiperidine‐1‐yloxy)‐2‐methylpropionate ( 1a ) and 4‐nitrophenyl 2‐(2,2‐diphenyl‐3‐phenylimino‐2,3‐dihydroindol‐1‐yloxy)‐2‐methylpropanoate ( 2a ) has been studied by ¹H NMR in the presence and in the absence (persistent radical effect condition) of scavenger (thiophenol PhSH). At temperature lower than the one used for polymerization, fast and quantitative H‐transfer reaction was observed for 1a whereas no H‐transfer reaction was observed for 2a . The scavenging technique proved for the first time that the H‐transfer was an intermolecular process for 1a . However, the slow side‐reaction of N? OC bond homolysis, which did not impede the control of the polymerization but may exert a detrimental effect on the livingness, was observed and quantified for 2a . © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6828–6842, 2008     

Cu(0)/2,6‐bis(imino)pyridines catalyzed single‐electron transfer‐living radical polymerization of methyl methacrylate initiated with poly(vinylidene fluoride‐co‐chlorotrifluoroethylene)

A series of 2,6‐bis(imino)pyridines, as common ligands for late transition metal catalyst in ethylene coordination polymerization, were successfully employed in single‐electron transfer‐living radical polymerization (SET‐LRP) of methyl methacrylate (MMA) by using poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) (P(VDF‐co‐CTFE)) as macroinitiator with low concentration of copper catalyst under relative mild‐reaction conditions. Well‐controlled polymerization features were observed under varied reaction conditions including reaction temperature, catalyst concentration, as well as monomer amount in feed. The typical side reactions including the chain‐transfer reaction and dehydrochlorination reaction happened on P(VDF‐co‐CTFE) in atom‐transfer radical polymerization process were avoided in current system. The relationship between the catalytic activity and the chemical structure of 2,6‐bis(imino)pyridine ligands was investigated by comparing both the electrochemical properties of Cu(II)/2,6‐bis(imino)pyridine and the kinetic results of SET‐LRP of MMA catalyzed with different ligands. The substitute groups onto N‐binding sites with proper steric bulk and electron donating are desirable for both high‐propagation reaction rate and C? Cl bonds activation capability on P(VDF‐co‐CTFE). The catalytic activity of Cu(0)/2,6‐bis(imino)pyridines is comparable with Cu(0)/2,2′‐bipyridine under the consistent reaction conditions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4378–4388     

Unexpected Imidazoquinoxalinone Annulation Products in the Photoinitiated Reaction of Substituted‐3‐Methyl‐Quinoxalin‐2‐Ones with N‐Phenylglycine

Photoinduced electron transfer between N ‐phenylglycine (NPG) and electronically excited triplets of 7‐substituted‐3‐methyl‐quinoxalin‐2‐ones in acetonitrile generate the respective ion radical pair, where by decarboxylation the phenyl‐amino‐alkyl radical, PhNHCH₂?, is generated. This radical reacts with the 3‐methyl‐quinoxalin‐2‐ones ground states, leading to the product 2. Other, unexpected, 7‐substituted‐1,2,3,3a‐tetrahydro‐3a‐methyl‐2‐phenylimidazo[1,5‐a]quinoxalin‐4(5H)‐ones, annulation products, 3a–f, were generated; likely by the addition of two PhNHCH₂? radicals, to positions 3 and 4 of the quinoxalin‐2‐ones. The reaction mechanism includes a photoinduced one electron transfer initiation step, propagation steps involving radical intermediates and NPG with radical chain termination steps that lead to the respective products 2a–f and 3a–f and NPG by‐products. The proposed mechanism accounts for the strong dependency found for the initial photoconsumption quantum yields on the electron‐withdrawing power of the substituent. Therefore, photolysis of common reactants widely used such as NPG and substituted quinoxalin‐2‐ones may provide a simple synthetic way to the unusual, unreported tetrahydro‐imidazoquinoxalinones 3a–f.     

Photopolymerization reactions initiated by a visible light photoinitiating system: Cyanine dye/borate salt/1,3,5‐triazine

New three‐component photoinitiating systems consisting of a cyanine dye, borate salt, and a 1,3,5‐triazine derivative were investigated by measuring their photoinitiation activities and through fluorescence quenching experiments. Polymerization kinetic studies based on the microcalorimetric method revealed a significant increase in polymerization rate when the concentration of n‐butyltriphenylborate salt or the 1,3,5‐triazine derivative were increased. The photo‐induced electron transfer process between electron donor and electron acceptor was studied by means of fluorescence quenching and SrEt change of the fluorescence intensity. The experiments performed documented that an increase of the n‐butyltriphenylborate salt concentration dramatically increases the rate of dye fluorescence quenching, whereas the increasing of the 1,3,5‐triazine derivative concentration slows down the consumption of the dye. We conclude that the primary photochemical reaction involves an electron transfer from the n‐butyltriphenylborate anion to the excited singlet state of the dye, followed by the reaction of the 1,3,5‐triazine derivative with the resulting dye radical to regenerate the original dye. This reaction simultaneously produces a triazinyl radical anion derived from the 1,3,5‐triazine, which undergoes the carbon‐halogen bond cleavage yielding radicals active in initiation of a free radical polymerization chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3626–3636, 2007     

Grafting of polymers onto a carbon‐fiber surface by ligand‐exchange reaction of poly(vinyl ferrocene‐co‐vinyl monomer) with polycondensed aromatic rings of the surface

To improve the surface of carbon fiber, the grafting reaction of copolymer containing vinyl ferrocene (VFE) onto a carbon‐fiber surface by a ligand‐exchange reaction between ferrocene moieties of the copolymer and polycondensed aromatic rings of carbon fiber was investigated. The copolymer containing VFE was prepared by the radical copolymerization of VFE with vinyl monomers, such as methyl methacrylate (MMA) and styrene, using 2,2′‐azobisisobutyronitrile as an initiator. By heating the carbon fiber with poly(VFE‐co‐MMA) (number‐average molecular weight: 2.1 × 10⁴) in the presence of aluminum chloride and aluminum powder, the copolymer was grafted onto the surface. The percentage of grafting reached 46.1%. On the contrary, in the absence of aluminum chloride, no grafting of the copolymer was observed. Therefore, it is considered that the copolymer was grafted onto the carbon‐fiber surface by a ligand‐exchange reaction between ferrocene moieties of the copolymer and polycondensed aromatic rings of carbon fiber. The molar number of grafted polymer chain on the carbon‐fiber surface decreased with increasing molecular weight of poly(VFE‐co‐MMA) because the steric hindrance of grafted copolymer on the carbon‐fiber surface increases with increasing molecular weight of poly(VFE‐co‐MMA). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1868–1875, 2002     

Photoredox‐Coupled F‐Nucleophilic Addition: Allylation of gem‐Difluoroalkenes

A novel strategy for the expedient construction of CF₃‐embeded tertiary/quarternary carbon centers was developed by taking advantage of photoredox catalysis. Thanks to a key step of single‐electron oxidation, electron‐rich gem‐difluoroalkenes, which otherwise are essentially reluctant towards F‐nucleoplilic addition, now readily participate in this fluoroallylation reaction. Furthermore, this strategy provides an elegant example for the generation, as well as functionalization, of α‐CF₃‐substituted benzylic radical intermediates using cheap and readily available starting materials.     

Preparation of polymer‐grafted carbon black nanoparticles by surface‐initiated atom transfer radical polymerization

Pristine carbon black was oxidized with nitric acid to produce carboxyl group, and then the carboxyl group was consecutively treated with thionyl chloride and glycol to introduce hydroxyl group. The hydroxyl group on the carbon black surface was reacted with 2‐bromo‐2‐methylpropionyl bromide to anchor atom transfer radical polymerization (ATRP) initiator. The ATRP initiator on carbon black surface was verified by TGA, FTIR, EDS, and elemental analysis. Then, poly (methyl methacrylate) and polystyrene chains were respectively, grown from carbon black surface by surface‐initiated atom transfer radical polymerization (SI‐ATRP) using CuCl/2,2‐dipyridyl (bpy) as the catalyst/ligand combination at 110 °C in anisole. ¹H NMR, TGA, TEM, AFM, DSC, and DLS were used to systemically characterize the polymer‐grafted carbon black nanoparticles. Dispersion experiments showed that the grafted carbon black nanoparticles had good solubilities in organic solvents such as THF, chloroform, dichloromethane, DMF, etc. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3451–3459, 2007     

Facile one‐pot method of initiator fixation for surface‐initiated atom transfer radical polymerization on carbon hard spheres

An efficient and novel one‐pot process is developed to immobilize the atom transfer radical polymerization (ATRP) initiators onto the surface of fully pyrolyzed carbon hard spheres (CHSs) via a radical trapping process from the in situ thermal decomposition of bis(bromomethylbenzoyl)peroxide. The CHSs do not require any additional preparative treatment prior to the initiator immobilization. Styrene and methyl methacrylate are polymerized onto initiator‐immobilized CHSs by surface‐initiated atomic transfer radical polymerization (SI‐ATRP). Samples are characterized using Fourier transform infrared, thermogravimetric analysis, scanning electron microscopy, and transmission electron microscopy. These methods of characterization confirmed that all the CHSs are coated with a uniform layer of grafted polymer. This efficient, one‐pot immobilization of ATRP‐initiators represents an exceptionally simple route for the rapid preparation of various polymer‐coated carbon‐based nanomaterials using SI‐ATRP. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3314–3322     

Amidyl Radicals by Oxidation of α‐Amido‐oxy Acids: Transition‐Metal‐Free Amidofluorination of Unactivated Alkenes

A three‐component transition‐metal‐free amidofluorination of unactivated alkenes and styrenes is presented. α‐Amido‐oxy acids are introduced as efficient and easily accessible amidyl radical precursors that are oxidized by a photoexcited organic sensitizer (Mes‐Acr‐Me) to the corresponding carboxyl radical. Sequential CO₂ and aldehyde/ketone fragmentation leads to an N‐centered radical that adds to an alkene. Commercial Selectfluor is used to trap the adduct radical through fluorine‐atom transfer. The transformation features by high functional‐group tolerance, broad substrate scope, and practical mild conditions. Mechanistic studies support the radical nature of the cascade.     

Thermal and pH‐sensitive gold nanoparticles from H‐shaped block copolymers of (PNIPAM/PDMAEMA)‐b‐PEG‐b‐(PNIPAM/PDMAEMA)

Well‐defined H‐shaped pentablock copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM), poly(N,N‐dimethylaminoethylacrylamide) (PDMAEMA), and poly(ethylene glycol) (PEG) with the chain architecture of (A/B)‐b‐C‐b‐(A/B) were synthesized by the combination of single‐electron‐transfer living radical polymerization, atom‐transfer radical polymerization, and click chemistry. Single‐electron‐transfer living radical polymerization of NIPAM using α,ω azide‐capped PEG macroinitiator resulted in PNIPAM‐b‐PEG‐b‐PNIPAM with azide groups at the block joints. Atom‐transfer radical polymerization of DMAEMA initiated by propargyl 2‐chloropropionate gave out α‐capped alkyne‐PDMAEMA. The H‐shaped copolymers were finally obtained by the click reaction between PNIPAM‐b‐PEG‐b‐PNIPAM and alkyne‐PDMAEMA. These copolymers were used to prepare stable colloidal gold nanoparticles (GNPs) in aqueous solution without any external reducing agent. The formation of GNPs was affected by the length of PDMAEMA block, the feed ratio of the copolymer to HAuCl₄, and the pH value. The surface plasmon absorbance of these obtained GNPs also exhibited pH and thermal dependence because of the existence of PNIAPM and PDAMEMA blocks. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Copper‐Catalyzed Arylation of Remote C(sp3)−H Bonds in Carboxamides and Sulfonamides

Reported herein is an unprecedented copper‐catalyzed arylation of remote C(sp³)?H bonds. Stirring a trifluorotoluene solution of either N‐fluorocarboxamides or N‐fluorosulfonamides and arylboronic acids in the presence of a catalytic amount of copper(II) trifluoroacetylacetonate, 2,2′‐bipyridine, and sodium tert‐butoxide afforded the γ‐ and δ‐C(sp³)?H arylated carboxamides and sulfonamides, respectively, in good to high yields. Mechanistic studies indicate that the reaction might proceed through an amidyl radical generation, 1,5‐hydrogen atom transfer (HAT), and copper‐catalyzed cross‐coupling of the resulting carbon radical with arylboronic acids.