金掺杂对碳负载钯催化还原性能的促进作用

在许多催化应用中双金属的PdAu催化剂性能优于单金属催化剂.科研人员对具有可控纳米结构和高活性的PdAu催化剂进行了广泛的研究,但该催化剂的制备需要多步且通常步骤复杂.本文仅通过浸渍和焙烧制得了Au掺杂的负载型Pd催化剂,所得PdAu/C催化剂用于室温水相三氯乙烯加氢脱氯反应.当Pd和Au负载量分别为1.0 wt%和1.1 wt%时,在经过干燥、空气处理和H2还原的过程后，所制得的PdAu/C催化剂活性最高,初始转化频率(TOF)为34.0×10–2 molTCEmolPd–1 s–1,是单金属1.0 wt%Pd/C催化剂TOF (2.2×10–2 molTCEmolPd–1 s–1)的15倍以上. X射线吸收光谱结果表明,金的加入避免了400oC焙烧时Pd的氧化.本文还提出了可能的催化剂纳米结构演变路径,以解释所观察到的催化现象.     

具有特殊结构和电子性质的PdAu/Al2O3催化剂上蒽醌加氢反应性能

通过改变Pd和Au的负载顺序合成了一系列具有不同结构和电子性质的PdAu双金属催化剂, 并用于蒽醌加氢反应. 其中通过先负载Au后负载Pd的顺序制得的Pd/Au/Al₂O₃催化剂, 其加氢效率可高达14.27 g·L^-1.X射线衍射、透射电子显微镜、H₂程序升温还原和X射线光电子能谱等分析表征结果显示, Pd/Au/Al₂O₃催化剂中分散在Au颗粒表面的Pd纳米颗粒具有独特的爆米花结构, 其表面零价态的单质Pd含量最多, 而这种表面零价态的单质Pd是蒽醌加氢反应中的关键活性组分. 此外, Au的加入可有效抑制副反应的发生, 减少降解产物的生成, 从而大大提高了催化选择性.     

Application of Laser Induced Breakdown Spectroscopy as a Novel Approach for Monitoring of the Activity of Nano Palladium Catalyst as Compared to Two Well-known Methods

Catalyst deactivation is an unavoidable process that occurs in catalytic chemical reactions. Laser Induced Breakdown Spectroscopy (LIBS) is used here as a novel approach to investigate the activity of palladium supported with carbon catalyst (Pd/C) over the hydrogenation of cinnamic acid with tetralin. Their outputs for four catalyst samples are reported for different time intervals of 0, 5, 10, 15 min during the reaction. The results of LIBS analysis are compared to Inductively Coupled Plasma Mass Spectrometry (ICP-MS), which shows a good agreement. Experimental data specify that line intensities of palladium (Pd) are decreased significantly with an increment of the reaction time. Moreover, the Field Emission Scanning Electron Microscope with energy dispersive spectroscopy (FESEM-EDS) of catalysts samples show aggregation of palladium particles for some places in the catalyst surface. The changes of Pd content and sintering of Pd particles in the catalyst during the reaction play substantial roles in catalyst deactivation.     

Immobilization of polymer-protected metal colloid catalysts by the formation of polymer hydrogen bond complexes

poly(N-vinyl-2-pyrrolidone)-(PVP) and polyvinyl alcohol-(PVA) protected nanoscopic noble metal colloidal catalysts were immobilized to prepare the corresponding heterogeneous catalysts by forming polymer hydrogen bond complexes of polyacrylic acid (PAA) with PVP or PVA. A PVP–PAA–Pd catalyst was found to be very active and selective for the partial hydrogenation of cyclopentadiene to cyclopentene.     

1,3-丁二烯选择性加氢催化剂的设计策略以及构效关系

催化裂化是石油化工的核心单元之一.从催化裂化尾气中分离出来的碳四馏分富含许多的不饱和烯烃,如1-丁烯、顺、反式-2-丁烯以及少量的1,3-丁二烯,这些不饱和烯烃可以通过后续聚合反应,生成合成橡胶和工程塑料的重要原料,具有重要的应用价值.上述工艺过程对原料中1,3-丁二烯的含量(<100~200 ppm)有严苛的要求.采用选择性加氢技术对碳四馏分中的1,3-丁二烯进行选择性加氢,将其转化为更高附加值的单烯烃是一个理想的解决方案.然而,1,3-丁二烯加氢反应得到的单烯烃可能发生深度加氢得到副产物丁烷.因此,开发高效选择性加氢催化剂对碳四资源的利用具有重要的现实意义.另一方面,1,3-丁二烯加氢反应可以作为模型反应,用来考察选择性加氢催化剂的性能.基于此,该反应无论在工业界还是学术界均受到广泛关注.尽管如此,有关1,3-丁二烯加氢催化剂研究进展方面的综述极少.仅有关于1,3-丁二烯加氢作为模型反应的综述报道.本文对过去半个世纪以来1,3-丁二烯加氢反应中不同催化剂的发展历程进行系统综述,特别是包括Pd,Pt和Au等的单一贵金属催化剂.重点介绍以下内容:(1)固体催化剂构效关系,包括活性金属尺寸效应、晶面和形貌效应以及载体效应(晶相、孔道和酸碱性);(2)高性能催化剂的设计新策略,如单原子催化剂、核壳结构催化剂、金属-离子液复合催化体系以及载体的形貌调控;(3)催化剂的反应机理和失活机理.提出了1,3-丁二烯选择性加氢高性能催化剂开发面临的挑战,并对潜在的发展方向进行了展望.本文认为随着纳米技术和金属纳米材料合成方法的快速发展,对贵金属活性组分进行原子层面上的调控(包括形貌、尺寸以及单原子配位环境等)已成为可能.这将有助于研制出一类新型高性能选择性加氢催化材料,从而实现高转化率条件下高附加值单烯烃的定向转化.此外,载体的酸碱性和孔道结构的调控有助于进一步调节催化剂的抗积炭性能,也是未来发展的一个重要方向.     

Bimetallic PdAu nanoparticles as hydrogenation catalysts in imidazolium ionic liquids

Metallic and bimetallic PdAu nanoparticles were solubilized in 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid (IL) by a phase-transfer method using poly(vinylpyrrolidone) (PVP) as a stabilizer. Nanoparticles were characterized by UV–vis spectroscopy and transmission electron microscopy. The bimetallic PdAu nanoparticles in the IL-phase were examined as catalysts for hydrogenation reactions; both the activity and selectivity of the hydrogenation reactions could be tuned by varying the composition of the bimetallic nanoparticles, with maximum activities seen at 1:3 Au:Pd ratios. These nanoparticles/IL catalysts were recycled and then reused for further catalytic reactions with minimal loss in activity.     

1,3-丁二烯选择性加氢催化剂的设计策略以及构效关系

催化裂化是石油化工的核心单元之一.从催化裂化尾气中分离出来的碳四馏分富含许多的不饱和烯烃,如1-丁烯、顺、反式-2-丁烯以及少量的1,3-丁二烯,这些不饱和烯烃可以通过后续聚合反应,生成合成橡胶和工程塑料的重要原料,具有重要的应用价值.上述工艺过程对原料中1,3-丁二烯的含量(<100~200 ppm)有严苛的要求.采用选择性加氢技术对碳四馏分中的1,3-丁二烯进行选择性加氢,将其转化为更高附加值的单烯烃是一个理想的解决方案.然而,1,3-丁二烯加氢反应得到的单烯烃可能发生深度加氢得到副产物丁烷.因此,开发高效选择性加氢催化剂对碳四资源的利用具有重要的现实意义.另一方面,1,3-丁二烯加氢反应可以作为模型反应,用来考察选择性加氢催化剂的性能.基于此,该反应无论在工业界还是学术界均受到广泛关注.尽管如此,有关1,3-丁二烯加氢催化剂研究进展方面的综述极少.仅有关于1,3-丁二烯加氢作为模型反应的综述报道.本文对过去半个世纪以来1,3-丁二烯加氢反应中不同催化剂的发展历程进行系统综述,特别是包括Pd,Pt和Au等的单一贵金属催化剂.重点介绍以下内容:(1)固体催化剂构效关系,包括活性金属尺寸效应、晶面和形貌效应以及载体效应(晶相、孔道和酸碱性);(2)高性能催化剂的设计新策略,如单原子催化剂、核壳结构催化剂、金属-离子液复合催化体系以及载体的形貌调控;(3)催化剂的反应机理和失活机理.提出了1,3-丁二烯选择性加氢高性能催化剂开发面临的挑战,并对潜在的发展方向进行了展望.本文认为随着纳米技术和金属纳米材料合成方法的快速发展,对贵金属活性组分进行原子层面上的调控(包括形貌、尺寸以及单原子配位环境等)已成为可能.这将有助于研制出一类新型高性能选择性加氢催化材料,从而实现高转化率条件下高附加值单烯烃的定向转化.此外,载体的酸碱性和孔道结构的调控有助于进一步调节催化剂的抗积炭性能,也是未来发展的一个重要方向.     

On the origin of reactive Pd catalysts for an electrooxidation of formic acid

We investigated the origin of the reactive surface of Pd catalysts during the electrocatalytic oxidation of formic acid. XPS analysis was the primary tool adapted to characterize the surface changes in Pd catalysts arising from interactions with formic acid. Pd catalysts showed fast deactivation, though their activity could be simply recovered by applying a reduction potential at which hydrogen evolution reaction can occur. XPS analysis revealed that the surface of Pd catalysts is significantly affected by interaction with formic acid, thus confirming that the surface coverage of oxygen species plays an important role in formic acid electrooxidation on the Pd catalysts. At the same time, mass transfer of formic acid also has an effect on the deactivation of Pd catalysts.     

PVA‐encapsulated Palladium Nanoparticles: Eco‐friendly and Highly Selective Catalyst for Hydrogenation of Nitrobenzene in Aqueous Medium

In aqueous medium without any other additives, palladium (Pd) nanoparticles with water‐soluble polyvinyl alcohol (PVA) as stabilizer were synthesized for the catalytic hydrogenation of nitrobenzene. Under the optimum experimental conditions, the nitrobenzene conversion and the selectivity for aniline were 99.3 % and 100 %, respectively. Comprehensive characterization methods, including TEM, UV/Vis, confocal laser scanning microscopy (CLSM), XRD and XPS allowed a better understanding of the role of PVA aggregates and the properties of Pd nanoparticles. The nitrobenzene conversion exceeded 80 % even after 6 cycles without any treatment of the catalyst. A mechanism about the hydrogenation of nitrobenzene catalyzed by Pd/PVA system was proposed. The Pd/PVA catalyst also exhibited excellent activity and selectivity, particularly to ortho‐fluoronitrobenzene and ortho‐nitrotoluene. This research can provide a reference for the environmentally friendly catalysis for hydrogenation of nitrobenzene and other substituted nitrobenzene compounds.     

Enhanced catalytic performance of Pd‐Ga bimetallic catalysts for 2‐ethylanthraquinone hydrogenation

A series of Pd and Pd‐Ga bimetallic catalysts were prepared by a co‐impregnation method for 2‐ethylanthraquinone (EAQ) hydrogenation to produce hydrogen peroxide. Compared with 0.6Pd catalyst, the hydrogenation efficiency of 0.6Pd1.2Ga catalyst (11.9 g L^?1) increases by 32.2%, and the stability of 0.6Pd1.2Ga catalyst is also higher than that of 0.6Pd catalyst. The structures of the samples were determined by N₂ adsorption–desorption, ICP, XRD, CO chemisorption, TEM, H₂‐TPR, in situ CO‐DRIFTS and XPS. The results suggest that incorporation of Ga species improves Pd dispersion and generates a strong interaction between Ga₂O₃ and Pd interface or between Pd and support. DFT calculation results indicate that the strong adsorption of carbonyl group on Ga₂O₃/Pd interface facilitates the activation of EAQ and promotes the hydrogenation efficiency.     

The Role of Nitrogen-doping in the Catalytic Transfer Hydrogenation of Phenol to Cyclohexanone with Formic Acid over Pd supported on Carbon Nanotubes

Highly selective one-step hydrogenation of phenol to cyclohexanone, an important intermediate in the production of nylon 6 and nylon 66, is desirable but remains a challenge. Pd nanoparticles supported on nitrogen- and oxygen-functionalized carbon nanotubes (NCNTs, OCNTs) were prepared, characterized, and applied in the hydrogenation of phenol to cyclohexanone to study the effect of N-doping. Almost full conversion of phenol with high selectivity to cyclohexanone was achieved over Pd/NCNT under mild reaction conditions using either H₂ or formic acid (FA) as a hydrogen source. The effects of reaction temperature and FA/phenol ratio and the reusability were investigated. Separate FA decomposition experiments without and with the addition of phenol were performed to investigate the reaction mechanism, especially the deactivation behavior. Deactivation was observed for both catalysts during the FA decomposition, while only Pd/OCNT rather than Pd/NCNT was deactivated in the transfer hydrogenation with FA and the FA decomposition in the presence of phenol, indicating the unique role of N-doping. Therefore, we assume that deactivation is caused by the strongly bound formates on the active Pd sites, suppressing further FA decomposition and/or transfer hydrogenation on Pd. The nonplanar adsorption of phenol on NCNTs via weak O−H⋅⋅⋅N interactions enables the occurrence of the subsequent hydrogenation by adsorbed formate on Pd.     

Chemoselective hydrogenation method catalyzed by Pd/C using diphenylsulfide as a reasonable catalyst poison

While Pd/C is one of the most useful catalysts for hydrogenation, the high catalyst activity of Pd/C causes difficulty in its application to chemoselective hydrogenation between different types of reducible functionalities. In order to achieve chemoselective hydrogenation using Pd/C, we investigated catalyst poison as a controller of the catalyst activity. We found that the addition of Ph₂S (diphenylsulfide) to the Pd/C-catalyzed hydrogenation reaction mixture led to reasonable deactivation of Pd/C. By the use of the Pd/C-Ph₂S catalytic system, olefins, acetylenes, and azides can be selectively reduced in the coexistence of aromatic carbonyls, aromatic halides, cyano groups, benzyl esters, and N-Cbz (benzyloxycarbonyl) protecting groups. The present method is promising as a general and practical chemoselective hydrogenation process in synthetic organic chemistry.     

Polyvinyl alcohol-modified graphene oxide as a support for bimetallic Pt–Pd electrocatalysts to enhance the efficiency of formic acid oxidation

The aim of this research was to study the efficiency of polyvinyl alcohol (PVA)-modified graphene oxide (GO) as a supporting material for catalysts that oxidize formic acid. The active metal catalysts (e.g., Pt and Pd) were electrodeposited on PVA/GO surfaces. The morphologies of the prepared catalysts were characterized by scanning electron microscopy and transmission electron microscopy, while their chemical compositions were identified by X-ray diffraction and X-ray photoelectron spectroscopy. The results show that compared with the other catalysts on GO, the prepared active PtPd alloy catalyst nanoparticles with 11.49–20.73 nm sizes were well dispersed on the PVA/GO surfaces. Electrochemical results indicate that the activities of the catalysts with PVA provided a higher current density than that of the catalysts without PVA. The bimetallic 3Pt3Pd/PVA/GO catalyst showed the greatest catalytic activity, stability, and CO oxidation when compared to those of other catalysts. The electronic, morphological, and structural properties promote the mass-charge transfer through the interaction. These results indicate that the PVA-modified GO provides a suitable site for active bimetallic catalyst surfaces, resulting in excellent formic acid oxidation and high CO elimination. The 3Pt3Pd/PVA/GO electrocatalyst is promising for enhancing formic acid oxidation.     

Pd/ZnO在乙炔选择加氢反应中的不同催化机制研究(英文)

化学选择性是评价催化剂性能最重要的参数之一,它直接决定了产物的经济价值及后续的分离成本.传统的负载型金属催化剂由于其金属粒径分布不均,且不同原子数组成的粒子通常具有特征产物选择性,从而限制化学选择性的提高;另一方面,对于金属多原子活性中心,反应物在催化剂表面可以存在多种吸附构型进而衍化为不同产物,产物可控性差.因此,获得金属尺寸均一,且具有原子分散的活性中心,即单原子催化剂,成为官能团多相催化转化高选择性的迫切需求.本课题组通过400 oC还原1%-Pd/ZnO得到PdZn金属间化合物,依据其规律排布的Pd-Zn-Pd单元获得Pd基单原子催化剂.该催化剂在乙烯化工中少量乙炔的加氢转化反应中获得令人欣喜的催化性能——兼具有乙炔的高转化率和乙烯的高选择性.结合微量吸附量热、理论计算等表征,Pd活性中心在PdZn金属间化合物中的特殊空间排布是其优异催化性能的根源,即乙炔以较强的σ键吸附在两个相邻的单Pd金属中心,易吸附活化加氢生成乙烯,而乙烯则吸附于单Pd金属中心,较弱的π键形式吸附有利于其脱附避免过渡加氢.基于前期研究,构筑具有均一单金属中心的负载型单原子催化剂是获得高选择性的另一有效方法,且较之于PdZn金属间化合物催化剂,该类单原子催化剂兼具有原子利用率最大化的优点.本文采用等体积浸渍法制备Pd/ZnO催化剂,通过降低Pd金属含量(1 wt%→0.1 wt%→0.01 wt%)并在较低的温度下(100 oC)还原(H2-TPR表明高温还原形成PdZn金属间化合物型合金)得到负载型单原子催化剂(Pd1/ZnO SAC).高分辨电镜结果表明,当Pd负载量由1%降至0.1%,金属纳米颗粒的粒径尺寸显著降低,而在0.01%-Pd/ZnO催化剂表面,Pd活性中心则以单原子状态分散于载体ZnO表面.X-射线吸收光谱及电子能谱表明,随着负载量的降低,Pd活性物种具有更高的正电性.该催化剂在乙炔选择性加氢反应中表现出更加优越的催化性能,具有与PdZn催化剂相当的高选择性,而更优的比活性.这归结于Pd1/ZnO单原子催化剂的Pdδ+单原子活性中心有助于其与乙炔的静电相互作用并吸附活化加氢生成乙烯,并促使乙烯以较弱的π键吸附,从而易于从催化剂表面脱附获得高选择性.     

Deactivation resistant PdSb/C catalysts for direct formic acid fuel cells

Formic acid oxidation at novel carbon supported PdSb alloy catalysts has been studied in a multi-anode direct formic acid fuel cell with supporting mechanistic studies in a conventional electrochemical cell. The optimized PdSb/C catalysts show better high voltage and long term performances than a comparable commercial Pd/C catalyst and much better resistance to poisoning (deactivation). Electrochemical stripping voltammograms show that the presence of Sb lowers the potential required for CO oxidation, and greatly decreases the accumulation of CO on the catalyst surface during formic acid oxidation.     

硝基芳烃氢化还原反应中高分子负载催化剂的双金属协同效应

制备了聚Ｎ－乙烯基－２－吡咯烷酮ＰＶＰ负载钯催化剂Ｐｄ／ＰＶＰ及各种双金属催化剂（１－ｍ）Ｐｄ－ｍＭ／ＰＶＰ，并用于硝基芳烃的加氢还原中，其中Ｐｄ／ＰＶＰ中加入Ｈ２ＰｔＣｌ６的效果最佳，碱的用量、溶剂和Ｐｄ、Ｐｔ的比例都对催化剂的活性有明显的影响，双金属催化剂０．８０Ｐｄ－０．２０Ｐｔ／ＰＶＰ在温和条件下能高活性，高选择性地催化硝基芳烃还原，得到相应的芳胺。     

醋酸仲丁酯加氢反应中Cu/B/Ca/Al_2O_3催化剂的失活及再生

Cu/B/Ca/Al2O3催化剂在长达1 118 h的催化醋酸仲丁酯加氢反应中出现了明显的失活.经过对比分析反应前、后和再生催化剂的组成、形貌和结构,发现金属铜粒子在长时间反应后无明显聚集,醋酸仲丁酯加氢反应中部分氧化钙向醋酸钙转变而引起催化剂结构的改变以及有机物种在催化剂表面的沉积是其失活的根本原因.失活后的催化剂经过350℃空气焙烧再生能够有效消除表面沉积的醋酸钙和有机物种,基本恢复催化剂的结构及其催化醋酸仲丁酯加氢反应的性能.     

水滑石负载钯催化剂上的醇无氧脱氢反应

 研究了多种载体负载 Pd 催化剂上苯甲醇无氧脱氢反应. 结果发现, 以兼具较强酸性和碱性的水滑石 (HT) 为载体时, Pd 催化剂具有优异的苯甲醇转化活性和苯甲醛选择性, 当 Pd 含量为 0.32%~0.55% 时催化性能最佳. Pd/HT 催化剂可重复使用, 且对于含推电子取代基的芳香醇、2-噻吩甲醇、α,β-不饱和醇与环状脂肪醇等的直接脱氢反应均具有较好催化性能. HT 表面的 Pd(II) 物种反应后转变为平均粒径为 2.0~2.5 nm 的 Pd 纳米粒子或纳米簇. 具有较高分散度的 Pd(II) 物种易转变为较小的 Pd 纳米粒子, 从而具有较佳的催化性能. 本文推测, 催化剂表面的碱性位可促进苯甲醇 O–H 键的活化, 形成 Pd-苯甲氧基中间体, 该中间体进一步脱氢生成苯甲醛和 Pd-H 物种; 而催化剂表面的质子酸位可与 Pd-H 作用, 促进 H2 的脱除.     

Bimetallic palladium-gold dendrimer-encapsulated catalysts

The synthesis, characterization, and catalytic properties of 1-3 nm-diameter bimetallic PdAu dendrimer-encapsulated catalysts are reported. Both alloy and core/shell PdAu nanoparticles were prepared. The catalytic hydrogenation of allyl alcohol was significantly enhanced in the presence of the alloy and core/shell PdAu nanoparticles as compared to mixtures of single-metal nanoparticles.     

Effect of Hydrohalogenation of Metal/Zeolite Catalysts for Cyclohexene Hydroconversion ‐Part 3‐ Pd/H‐ZSM‐5 Catalysts

Cyclohexene (CHE) hydroconversion was performed in a flow reactor at atmospheric pressure and temperatures of 50–400 °C using: Pd/H‐ZSM‐5, Pd/H‐ZSM‐5(HCl), and Pd/H‐ZSM‐5(HF) catalysts. These catalysts were characterized for acid site strength distribution via NH₃ TPD, Pd dispersion via H₂ chemisorption, TPR via reduction of the metal oxide in the catalysts and XRD for tracing crystallinity The hydroconversion steps proceeded as follows: CHE → Cyclohexane (CHA); CHE → Methylcyclopentenes (MCPEs) → Methylcyclopentane (MCPA); CHE → Cyclohexadienes (CHDEs) → Benzene → Alkylbenzenes; CHE and others → Hydrocrackedproducts. The overall hydroconversion of CHE was achieved in the catalyst order: Pd/H‐ZSM‐5 > Pd/H‐ZSM‐5(HF) > Pd/H‐ZSM‐5(HCl). CHE hydrogenation step was the major reaction at low temperatures which significantly inhibited via HCl treatment, but slightly enhanced via HF treatment. At medium temperatures, on all catalysts, isomerisation to MCPEs and MCPA increase to a maximum then a decline with a further increase of temperature. The overall isomerisation of CHE was highest on the untreated catalyst. During the higher temperature range, dehydrogenation, alkylation and hydrocracking were increased with temperature. Dehydrogenation of CHE always yielded larger amounts of 1,3‐CHDE than 1,4‐CHDE. These cyclohexadienes were produced in the catalyst order: Pd/H‐ZSM‐5(HF) > Pd/H‐ZSM‐5(HCl) > Pd/H‐ZSM‐5. In general, benzene alkylation to toluene exceeded that of xylenes, indicating that the second methylation is more difficult than the first. However, the catalytic activities for benzene and toluene production were in the order: Pd/H‐ZSM‐5 » Pd/H‐ZSM‐5(HCl) > Pd/H‐ZSM‐5(HF), whereas for xylenes production, Pd/H‐ZSM‐5 » Pd/H‐ZSM‐5(HF) > Pd/H‐ZSM‐5(HCl). Intrapore diffusion plays an important role during the dehydrogenation reactions as well as during the interconversion of individual aromatic hydrocarbons.