Ultralight,High Capacitance,Mechanically Strong Graphene-Cellulose Aerogels

With increasing energy demand driving the need for eco-friendly and efficient energy storage technology, supercapacitors are becoming increasingly prevalent in wearable devices because of their portability and stability. The performance of these supercapacitors is highly dependent on the choice of electrode material. The high capacitance and mechanical properties needed for these materials can be achieved by combining graphene’s stable electrical properties with renewable cellulose’s excellent mechanical properties into porous aerogels. In this study, graphene-cellulose hydrogels were prepared by a one-step hydrothermal method, with porous, ultra-light, and mechanically strong graphene-cellulose aerogels then prepared by freeze-drying. These composite aerogels possess excellent mechanical strength and high specific capacitance, capable of bearing about 1095 times the pressure of their own weight. Electrochemical tests show the specific capacitance of these composite aerogels can reach 202 F/g at a scanning rate of 5 mA/cm². In view of their high surface area and fast charge transport provided by their 3D porous structure, graphene-cellulose aerogels have great potential as sustainable supercapacitor electrodes.     

Wood‐Derived Ultrathin Carbon Nanofiber Aerogels

Carbon aerogels with 3D networks of interconnected nanometer‐sized particles exhibit fascinating physical properties and show great application potential. Efficient and sustainable methods are required to produce high‐performance carbon aerogels on a large scale to boost their practical applications. An economical and sustainable method is now developed for the synthesis of ultrathin carbon nanofiber (CNF) aerogels from the wood‐based nanofibrillated cellulose (NFC) aerogels via a catalytic pyrolysis process, which guarantees high carbon residual and well maintenance of the nanofibrous morphology during thermal decomposition of the NFC aerogels. The wood‐derived CNF aerogels exhibit excellent electrical conductivity, a large surface area, and potential as a binder‐free electrode material for supercapacitors. The results suggest great promise in developing new families of carbon aerogels based on the controlled pyrolysis of economical and sustainable nanostructured precursors.     

Boron/nitrogen flame retardant additives cross‐linked cellulose nanofibril/montmorillonite aerogels toward super‐low flammability and improved mechanical properties

Low‐flammability freeze‐dried cellulose nanofibril (CNF)/sodium montmorillonite (MMT) aerogels with improved mechanical properties were fabricated via a facile cross‐linking of boric acid (BA) and melamine‐formaldehyde (MF) resins. Scanning electron microscopy analysis showed that BA cross‐linking reduced the interspacing of layered CNF/MMT aerogels whereas introduction of MF formed polymeric fibrils that connected the layers. These changes on microstructures resulted in the improvement on compressive mechanical properties of the cross‐linked aerogels. Moreover, the boron (B)/nitrogen (N) containing flame retardant cross‐linkers greatly increased the limiting oxygen index values that could reach 85% and leveled the UL‐94 rating from no rating to V‐0. Cone calorimetric results suggested that BA and MF induced a synergistic effect on the flame retardant properties of the CNF/MMT aerogels. However, the thermal conductivity was little affected because pore structure and size was not substantially modified. This simple approach fabricated highly flame‐resistant and mechanically strong CNF‐based aerogels that could be used in various engineering fields.     

Assembly of BaTiO3 Nanocrystals into Macroscopic Aerogel Monoliths with High Surface Area

Aerogels with their low density and high surface area are fascinating materials. However, their advantageous morphology is still far from being fully exploited owing to their limited compositional variety and low crystallinity. Replacing the sol–gel process by a particle‐based assembly route is a powerful alternative to expand the accessible functionalities of aerogels. A strategy is presented for the controlled destabilization of concentrated dispersions of BaTiO₃ nanoparticles, resulting in the assembly of the fully crystalline building blocks into cylindrically shaped monolithic gels, thereby combining the inherent properties of ternary oxides with the highly porous microstructure of aerogels. The obtained aerogels showed an unprecedentedly high surface area of over 300 m² g^?1.     

Strong,Thermally Superinsulating Biopolymer–Silica Aerogel Hybrids by Cogelation of Silicic Acid with Pectin

Silica aerogels are excellent thermal insulators, but their brittle nature has prevented widespread application. To overcome these mechanical limitations, silica–biopolymer hybrids are a promising alternative. A one‐pot process to monolithic, superinsulating pectin–silica hybrid aerogels is presented. Their structural and physical properties can be tuned by adjusting the gelation pH and pectin concentration. Hybrid aerogels made at pH 1.5 exhibit minimal dust release and vastly improved mechanical properties while remaining excellent thermal insulators. The change in the mechanical properties is directly linked to the observed “neck‐free” nanoscale network structure with thicker struts. Such a design is superior to “neck‐limited”, classical inorganic aerogels. This new class of materials opens up new perspectives for novel silica–biopolymer nanocomposite aerogels.     

Strong,Thermally Superinsulating Biopolymer–Silica Aerogel Hybrids by Cogelation of Silicic Acid with Pectin

Silica aerogels are excellent thermal insulators, but their brittle nature has prevented widespread application. To overcome these mechanical limitations, silica–biopolymer hybrids are a promising alternative. A one‐pot process to monolithic, superinsulating pectin–silica hybrid aerogels is presented. Their structural and physical properties can be tuned by adjusting the gelation pH and pectin concentration. Hybrid aerogels made at pH 1.5 exhibit minimal dust release and vastly improved mechanical properties while remaining excellent thermal insulators. The change in the mechanical properties is directly linked to the observed “neck‐free” nanoscale network structure with thicker struts. Such a design is superior to “neck‐limited”, classical inorganic aerogels. This new class of materials opens up new perspectives for novel silica–biopolymer nanocomposite aerogels.     

Self‐Assembled Dipeptide Aerogels with Tunable Wettability

Constructing supramolecular materials with tunable properties and functions is a great challenge due to the complex competition between multiple assembly pathways. Herein, we report that dipeptides can self‐assemble into aerogels with entirely different surface wettability through precisely controlling the assembly pathways. Charged groups or aromatic residues are selectively exposed on the surface of their nanoscale building blocks which results either in a superhydrophilic or highly hydrophobic surface. With this special property, single component dipeptide aerogels can play diverse roles in medical care applications. This study suggests great promise in the synthesis of supramolecular materials with different targeted functions from the same molecular unit.     

Polyethylene Aerogels with Combined Physical and Chemical Crosslinking: Improved Mechanical Resilience and Shape‐Memory Properties

While the introduction of polymers into aerogels strongly enhances their toughness, truly elastic monolithic aerogels which restore their dimensions upon extensive compression are still challenging to synthesize. In this context hydrophobic semi‐crystalline polymers with low glass transition temperatures, and combined stiffness and flexibility, have only recently attracted attention. Shown here is that polyethylene aerogels with a low density, and combined chemical crosslinking and high crystallinity, display high moduli and excellent mechanical resilience. To maximize the crystallinity of these aerogels while maintaining a high crosslinking density, polyethylene networks with well‐defined segments were synthesized by hydrosilylation crosslinking of telechelic, vinyl‐functionalized oligomers obtained from catalyzed chain‐growth polymerization. Recoverable deformations both above and below the melting temperature of polyethylene affords remarkable shape‐memory properties.     

An Easy Way To Prepare Monolithic Inorganic Oxide Aerogels

Inorganic oxide aerogels have unique thermal, optical, electrical, magnetic, and chemical properties, which result in them potentially having a broad range of applications. However, their preparation is commonly based on a supercritical drying method, which greatly limits real applications of aerogels and their commercialization. Here we demonstrate a general method for drying wet gels to form aerogels that is based on the sublimation of organic solvent. The organic solvent must have a low surface tension, undergo sublimation easily, and have a high freezing point to allow the rapid synthesis of monolithic inorganic oxide aerogels under vacuum conditions. This cost‐effective process will facilitate application of aerogel materials. This approach may also be used for the preparation of other porous materials, whose theoretical and practical applications should be investigated.     

Function‐Led Design of Aerogels: Self‐Assembly of Alloyed PdNi Hollow Nanospheres for Efficient Electrocatalysis

One plausible approach to endow aerogels with specific properties while preserving their other attributes is to fine‐tune the building blocks. However, the preparation of metallic aerogels with designated properties, for example catalytically beneficial morphologies and transition‐metal doping, still remains a challenge. Here, we report on the first aerogel electrocatalyst composed entirely of alloyed PdNi hollow nanospheres (HNSs) with controllable chemical composition and shell thickness. The combination of transition‐metal doping, hollow building blocks, and the three‐dimensional network structure make the PdNi HNS aerogels promising electrocatalysts for ethanol oxidation. The mass activity of the Pd₈₃Ni₁₇ HNS aerogel is 5.6‐fold higher than that of the commercial Pd/C catalyst. This work expands the exploitation of the electrocatalysis properties of aerogels through the morphology and composition control of its building blocks.     

Electrochemical Properties of Vanadium Oxide Aerogels and Aerogel Nanocomposites

The electrochemical properties of high surface area transition metal oxide aerogels are extremely interesting because aerogels serve to amplify surface effects. As a result, the electrochemical properties are dominated by surfaces rather than by bulk behavior. In the case of vanadium oxide aerogels this leads to extraordinary electrochemical properties, including an extremely high capacity for lithium and electrochemical responses that are both battery-like and capacitor-like. By exploiting sol-gel synthesis, it is possible to synthesize nanocomposite electrodes in which aerogels are in intimate contact with carbon nanotubes. The resulting nanocomposites exhibit superior electrochemical properties, especially at high discharge.     

Hydrophobic Silica Aerogels Strengthened with Nonwoven Fibers

Hydrophobic silica aerogels were prepared via a sol‐gel process by surface modification at ambient pressure. Nonwoven fibers were distributed inside the silica aerogels as a composite to act as a supporting skeleton which increased the mechanical property of the silica aerogels. The morphology and pore structure of the composites were characterized by scanning electron microscopy (SEM) and N₂ adsorption analyzer. The contact angle and the adsorption capacities of the composites were also determined. The results show that silica aerogels dispersed uniformly and maintained high porosity in the aerogel‐fiber composites. They have excellent hydrophobic properties and are excellent adsorptive materials.     

Freeze–Thaw‐Promoted Fabrication of Clean and Hierarchically Structured Noble‐Metal Aerogels for Electrocatalysis and Photoelectrocatalysis

Noble‐metal aerogels (NMAs) have drawn increasing attention because of their self‐supported conductive networks, high surface areas, and numerous optically/catalytically active sites, enabling their impressive performance in diverse fields. However, the fabrication methods suffer from tedious procedures, long preparation times, unavoidable impurities, and uncontrolled multiscale structures, discouraging their developments. By utilizing the self‐healing properties of noble‐metal aggregates, the freezing‐promoted salting‐out behavior, and the ice‐templating effect, a freeze–thaw method is crafted that is capable of preparing various hierarchically structured noble‐metal gels within one day without extra additives. In light of their cleanliness, the multi‐scale structures, and combined catalytic/optical properties, the electrocatalytic and photoelectrocatalytic performance of NMAs are demonstrated, which surpasses that of commercial noble‐metal catalysts.     

Anatase–silica composite aerogels: a nanoparticle-based approach

Herein we present the synthesis of anatase–silica aerogels based on the controlled gelation of preformed nanoparticle mixtures. The monolithic aerogels with macroscopic dimensions show large specific surface areas, and high and uniform porosities. The major advantage of such a particle-based approach is the great flexibility in pre-defining the compositional and structural features of the final aerogels before the gelation process by fine-tuning the properties of the titania and silica building blocks (e.g., size, composition and crystallinity) and their relative ratio in the dispersion. Specific surface functionalization enables control over the interaction between the nanoparticles and thus over their distribution in the aerogel. Positively charged titania nanoparticles are co-assembled with negatively charged Stoeber particles, resulting in a binary aerogel with a crystalline anatase and amorphous silica framework directly after supercritical drying without any calcination step. Titania–silica aerogels combine the photocatalytic activity of the anatase nanoparticles with the extensive silica chemistry available for silica surface functionalization.     

Versatile Aerogel Fabrication by Freezing and Subsequent Freeze‐Drying of Colloidal Nanoparticle Solutions

A versatile method to fabricate self‐supported aerogels of nanoparticle (NP) building blocks is presented. This approach is based on freezing colloidal NPs and subsequent freeze drying. This means that the colloidal NPs are directly transferred into dry aerogel‐like monolithic superstructures without previous lyogelation as would be the case for conventional aerogel and cryogel fabrication methods. The assembly process, based on a physical concept, is highly versatile: cryogelation is applicable for noble metal, metal oxide, and semiconductor NPs, and no impact of the surface chemistry or NP shape on the resulting morphology is observed. Under optimized conditions the shape and volume of the liquid equal those of the resulting aerogels. Also, we show that thin and homogeneous films of the material can be obtained. Furthermore, the physical properties of the aerogels are discussed.     

Zirconia‐based Aerogels via Hydrolysis of Salts and Alkoxides: The Influence of the Synthesis Procedures on the Properties of the Aerogels

This contribution aims at evaluating different synthesis procedures leading to zirconia‐based aerogels. A series of undoped and yttrium‐doped zirconia aerogels have been prepared via hydrolysis and condensation reaction of different alkoxy‐ and different inorganic salt‐based precursors followed by supercritical drying. Well‐established but deleterious zirconium n‐propoxide (TPOZ) or zirconium n‐butoxide (TBOZ) were used as metal precursors in combination with acids like nitric acid and acetic acid as auxiliary agent for the generation of non‐yttrium stabilized zirconia aerogels. Yttrium‐stabilized zirconia aerogels as well as pure zirconia aerogels were obtained by the salt route starting from ZrCl₄ and crosslinking agents like propylene oxide or acetylacetone. The characteristics of the products were analyzed by nitrogen adsorption measurements, electron microscopy, and X‐ray scattering. It turned out that with respect to all relevant properties of the aerogels as well as the practicability of the synthesis procedures, approaches based on inexpensive non‐toxic salt precursors are the methods of choice. The salt‐based approaches allow not only for low‐cost, easy‐to‐handle synthesis procedures with realizable gelation times of less than 60 seconds, but also delivered the products with the highest surface area (449 m² g^?1 for ZrCl₄) within this series of syntheses.     

Carbon Nitride Aerogels for the Photoredox Conversion of Water

Aerogel structures have attracted increasing research interest in energy storage and conversion owing to their unique structural features, and a variety of materials have been engineered into aerogels, including carbon‐based materials, metal oxides, linear polymers and even metal chalcogenides. However, manufacture of aerogels from nitride‐based materials, particularly the emerging light‐weight carbon nitride (CN) semiconductors is rarely reported. Here, we develop a facile method based on self‐assembly to produce self‐supported CN aerogels, without using any cross‐linking agents. The combination of large surface area, incorporated functional groups and three‐dimensional (3D) network structure, endows the resulting freestanding aerogels with high photocatalytic activity for hydrogen evolution and H₂O₂ production under visible light irradiation. This work presents a simple colloid chemistry strategy to construct 3D CN aerogel networks that shows great potential for solar‐to‐chemical energy conversion by artificial photosynthesis.     

Vanadium oxide aerogels: Nanostructured materials for enhanced energy storage

The synthesis, chemistry, local structure and electrochemical properties of vanadium oxide xerogels and aerogels have much in common. The one difference in their respective synthesis routes, the means by which solvent is removed, has a significant influence on the resulting morphology. The high surface area, nanodimensional solid phase, short diffusion paths and interconnected mesoporosity of the aerogels exert a profound effect on their electrochemical properties. Our studies with V₂O₅ aerogels show that these materials offer the promise of achieving both high energy density and high power density because of a pseudocapacitive charge storage mechanism which develops.     

Preparation and characterization of silica aerogels from diatomite via ambient pressure drying

The silica aerogels were successfully fabricated under ambient pressure from diatomite. The influence of different dilution ratios of diatomite filtrate on physical properties of aerogels were studied. The microstructure, surface functional groups, thermal stability, morphology and mechanical properties of silica aerogels based on diatomite were investigated by BET adsorption, FT-IR, DTA-TG, FESEM, TEM, and nanoindentation methods. The results indicate that the filtrate diluted with distilled water in a proportion of 1: 2 could give silica aerogels in the largest size with highest transparency. The obtained aerogels with density of 0.122–0.203 g/m³ and specific surface area of 655.5–790.7 m²/g are crack free amorphous solids and exhibited a sponge-like structure. Moreover, the peak pore size resided at 9 nm. The initial aerogels were hydrophobic, when being heat-treated around 400°C, the aerogels were transformed into hydrophilic ones. The obtained aerogel has good mechanical properties.     

Superelastic,Macroporous Polystyrene‐Mediated Graphene Aerogels for Active Pressure Sensing

Three‐dimensional (3D) graphene‐based polymer/graphene aerogels with excellent mechanical properties are crucial for broad applications. The creation of such polymer/graphene aerogels remains challenging because of the poor dispersion and compatibility of polymer within the graphene matrix. By using the freezing‐directed assembly of graphene under the assistance of surfactant, 3D macroporous polystyrene/graphene aerogels (MPS‐GAs) with lightweight, superelastivity (80 % strain), high strength (80 kPa), and good electrical properties have been achieved in this study. The as‐prepared MPS‐GAs shows excellent electromechanical performance with stable cyclic resilient properties and sensitive resistance responses, thus making the MPS‐GAs promising candidates for applications in actuators, elastic conductors, strain/pressure sensors, and wearable devices.