Post-assembly processing of [2]rotaxanes

The concept of using [2]rotaxanes that carry one or more surrogate stoppers which can subsequently be converted chemically into other structural units, resulting in the formation of new interlocked molecular compounds, is introduced and exemplified. Starting from simple NH2(+)-centered/crown-ether-based [2]rotaxanes, containing either one or two benzylic triphenylphosphonium stoppers, the well-known Wittig reaction has been employed to make, 1) other [2]rotaxanes, 2) higher order rotaxanes, 3) branched rotaxanes, and 4) molecular shuttles--all isolated as pure compounds, following catalytic hydrogenations of their carbon-carbon double bonds, obtained when aromatic aldehydes react with the ylides produced when the benzylic triphenylphosphonium derivatives are treated with strong base. The two starting [2]rotaxanes were characterized fully in solution and also in the solid state by X-ray crystallography. The new interlocked molecular compounds that result from carrying out post-assembly Wittig reactions on two [2]rotaxanes were characterized by (dynamic) 1H NMR spectroscopy. In the case of a molecular shuttle in which the crown ether component is dibenzo[24]-crown-8 (DB24C8), shuttling is slow on the 1H NMR timescale, even at high temperatures. However, when DB24C8 is replaced by benzometaphenylene[25]-crown-8 as the ring component in the molecular shuttle, the frequency of the shuttling is observed to be around 100 Hz in [D4]methanol at 63 degrees C.     

Quantitative conformational study of redox-active [2]rotaxanes, part 2: Switching in flexible and rigid bistable [2]rotaxanes

Translational movement of the macrocycle in two structurally similar bistable [2]rotaxanes, which is induced by a four-step electrochemical process in solution, has been investigated by using a methodology developed in the preceding article (Chem. Eur. J. 2008, 14, 1107-1116). Both [2]rotaxanes contain a crown ether that can be accommodated by either of two interconnected viologen recognition sites. These sites are substantially different in terms of their affinity towards the crown ether and they possess considerably different electrochemical reduction potentials. The two [2]rotaxanes differ in the length and the rigidity of a bridge that links these sites. A combination of molecular mechanics modelling and NOE spectroscopy data provides information about the conformations of both [2]rotaxanes in the parent oxidation state when the crown ether exclusively populates the strong recognition site. To determine the population of the recognition sites at subsequent stages of reduction, a paramagnetic NMR technique and cyclic voltammetry were used. The key finding is that the flexibility of the connecting bridge element between the recognition sites interferes with shuttling of the crown ether in [2]rotaxanes. It can be demonstrated that the more flexible trimethylene bridge is folded, thus limiting the propensity of the crown ether to shuttle. Consequently, the crown ether populates the original site even in the second reduced state of the flexible [2]rotaxane. On the contrary, in the [2]rotaxane in which two viologen sites are connected by a larger and more rigid p-terphenylene bridge, the predominant location of the crown ether at the weak recognition site is achieved after just one single electron reduction.     

DNA Origami Rotaxanes: Tailored Synthesis and Controlled Structure Switching

Mechanically interlocked supramolecular assemblies are appealing building blocks for creating functional nanodevices. Herein, we describe the multistep assembly of large DNA origami rotaxanes that are capable of programmable structural switching. We validated the topology and structural integrity of these rotaxanes by analyzing the intermediate and final products of various assembly routes by electrophoresis and electron microscopy. We further analyzed two structure‐switching behaviors of our rotaxanes, which are both mediated by DNA hybridization. In the first mechanism, the translational motion of the macrocycle can be triggered or halted at either terminus. In the second mechanism, the macrocycle can be elongated after completion of the rotaxane assembly, giving rise to a unique structure that is otherwise difficult to access.     

Macrocycle breathing in [2]rotaxanes with tetralactam macrocycles

The structural dynamics of two pairs of [2]rotaxanes were compared using variable-temperature NMR. Each rotaxane had a surrounding tetralactam macrocycle with either 2,6-pyridine dicarboxamide or isophthalamide bridging units. Differences were observed in two types of rotational processes: spinning of the phenylene wall units in the surrounding macrocycle of squaraine rotaxanes and macrocycle pirouetting in xanthone rotaxanes. The rotaxanes with macrocycles containing 2,6-pyridine dicarboxamide bridges exhibited higher rotational barriers due to a cavity contraction effect, which disfavored macrocycle breathing.     

Degenerate [2]rotaxanes with electrostatic barriers

A synthetic approach to the preparation of [2]rotaxanes (1-5·6PF(6)) incorporating bispyridinium derivatives and two 1,5-dioxynaphthalene (DNP) units situated in the rod portions of their dumbbell components that are encircled by a single cyclobis(paraquat-p-phenylene) tetracationic (CBPQT(4+)) ring has been developed. Since the π-electron-deficient bispyridinium units are introduced into the dumbbell components of the [2]rotaxanes 1-5·6PF(6), there are Coulombic charge-charge repulsions between these dicationic units and the CBPQT(4+) ring in the [2]rotaxanes. Thus, the CBPQT(4+) rings in the degenerate [2]rotaxanes exhibit slow shuttling between two DNP recognition sites on the (1)H NMR time-scale on account of the electrostatic barrier posed by the bispyridinium units, as demonstrated by variable-temperature (1)H NMR spectroscopy. Electrochemical experiments carried out on the [2]rotaxanes 1·6PF(6) and 2·6PF(6) indicate that the one-electron reduced bipyridinium radical cation in the dumbbell components of the [2]rotaxanes serves as an additional recognition site for the two-electron reduced CBPQT(2(˙+)) diradical cationic ring. Under appropriate conditions, the ring components in the degenerate rotaxanes 1·6PF(6) and 2·6PF(6) can shuttle along the recognition sites--two DNP units and one-electron reduced bipyridinium radical cation--under redox control.     

Phosphorus-based functional groups as hydrogen bonding templates for rotaxane formation

We report on the use of the hydrogen bond acceptor properties of some phosphorus-containing functional groups for the assembly of a series of [2]rotaxanes. Phosphinamides, and the homologous thio- and selenophosphinamides, act as hydrogen bond acceptors that, in conjunction with an appropriately positioned amide group on the thread, direct the assembly of amide-based macrocycles around the axle to form rotaxanes in up to 60% yields. Employing solely phosphorus-based functional groups as the hydrogen bond accepting groups on the thread, a bis(phosphinamide) template and a phosphine oxide-phosphinamide template afforded the corresponding rotaxanes in 18 and 15% yields, respectively. X-ray crystallography of the rotaxanes shows the presence of up to four intercomponent hydrogen bonds between the amide groups of the macrocycle and various hydrogen bond accepting groups on the thread, including rare examples of amide-to-phosphinamide, -thiophosphinamide, and -selenophosphinamide groups. With a phosphine oxide-phosphinamide thread, the solid-state structure of the rotaxane is remarkable, featuring no direct intercomponent hydrogen bonds but rather a hydrogen bond network involving water molecules that bridge the H-bonding groups of the macrocycle and thread through bifurcated hydrogen bonds. The incorporation of phosphorus-based functional groups into rotaxanes may prove useful for the development of molecular shuttles in which the macrocycle can be used to hinder or expose binding ligating sites for metal-based catalysts.     

A Dual‐Response [2]Rotaxane Based on a 1,2,3‐Triazole Ring as a Novel Recognition Station

Two novel multilevel switchable [2]rotaxanes containing an ammonium and a triazole station have been constructed by a Cu^I‐catalyzed azide–alkyne cycloaddition reaction. The macrocycle of [2]rotaxane containing a C6‐chain bridge between the two hydrogen bonding stations exhibits high selectivity for the ammonium cation in the protonated form. Interestingly, the macrocycle is able to interact with the two recognition stations when the bridge between them is shortened. Upon deprotonation of both [2]rotaxanes, the macrocycle moves towards the triazole recognition site due to the hydrogen‐bond interaction between the triazole nitrogen atoms and the amide groups in the macrocycle. Upon addition of chloride anion, the conformation of [2]rotaxane is changed because of the cooperative recognition of the chloride anion by a favorable hydrogen‐bond donor from both the macrocycle isophthalamide and thread triazole CH proton.     

Two [2]pseudorotaxane-like complexes and their corresponding [2]rotaxanes stabilized via interactions on opposite ends of the same macrocycle

A multiple-use macrocycle recognizes dibenzylammonium ions and 2,6-lutidine derivatives, each in a [2]pseudorotaxane-like manner, through interactions with its diethylene glycol (hydrogen bonding) and 2,6-pyridinedicarboxamide (Pd²⁺ chelation) spacers, respectively. We characterized these complexes in the solid state (X-ray crystallography) and in solution (¹H NMR spectroscopy). The synthesis of two corresponding [2]rotaxanes confirmed that these recognition systems possess [2]pseudorotaxane geometries in solution.     

Synthesis and exploring the excited-state PES of photochromic hydrogen bond-assembled [2]rotaxane based on 1,3-Diazabicyclo-[3.1.0]hex-3-enes

Here, the synthesis of photochromic hydrogen bond-assembled [2]rotaxanes using bis-fumarate as a thread for the first time is reported. In fact, photochromic 1,3-diazabicyclo[3.1.0]hex-3-ene moieties were used as stoppers and two-atom spacers managed good binding sites for the tetralactam macrocycles in clipping reactions. Moreover, the yields of photochromic [2]rotaxanes highly depended on the NO₂ substituent stoppers. While the thread with a para –NO₂ substituent as stopper units was shown to be an excellent template for the synthesis of photochromic [2]rotaxanes. The structures of the [2]rotaxanes are established clearly in solution by chemical shifts of the ¹H ¹³C NMR signals and UV–Vis spectra. A pronounced bathochromic shift was occurred in the excitation wavelength of photochoromic [2]rotaxanes compared with the absorption band of photochromic threads. Therefore, these organizations can be applied in light-driven molecular switches and motors. The reversible transformation of trans and cis geometric photoisomers under UV radiation was identified. In other efforts, the possibility of the process of trans to cis interconversion of the fumarate linker under UV irradiation has been examined computationally and it has appeared that it may cause the transverse of the bis-fumarate linker inside the tetralactam macrocycle to some extent.

     

Metastable doubly threaded [3]rotaxanes with a large macrocycle

Ring size is a critically important parameter in many interlocked molecules as it directly impacts many of the unique molecular motions that they exhibit. Reported herein are studies using one of the largest macrocycles reported to date to synthesize doubly threaded [3]rotaxanes. A large ditopic 46 atom macrocycle containing two 2,6-bis(N-alkyl-benzimidazolyl)pyridine ligands has been used to synthesize several metastable doubly threaded [3]rotaxanes in high yield (65–75% isolated) via metal templating. Macrocycle and linear thread components were synthesized and self-assembled upon addition of iron(ii) ions to form the doubly threaded pseudo[3]rotaxanes that could be subsequently stoppered using azide–alkyne cycloaddition chemistry. Following demetallation with base, these doubly threaded [3]rotaxanes were fully characterized utilizing a variety of NMR spectroscopy, mass spectrometry, size-exclusion chromatography, and all-atom simulation techniques. Critical to the success of accessing a metastable [3]rotaxane with such a large macrocycle was the nature of the stopper group employed. By varying the size of the stopper group it was possible to access metastable [3]rotaxanes with stabilities in deuterated chloroform ranging from a half-life of <1 minute to ca. 6 months at room temperature potentially opening the door to interlocked materials with controllable degradation rates.

Multiple metastable doubly threaded [3]rotaxanes using a large 46 atom ring were prepared and fully characterized. Varying the stopper group size gave a range of interlocked stabilities in CDCl₃ from a half-life of <1 minute to ca. 6 months.     

Threading-followed-by-shrinking protocol for the synthesis of a [2]rotaxane incorporating a Pd(II)-salophen moiety

This communication describes a new protocol for the construction of [2]rotaxanes: "threading-followed-by-shrinking". This approach involves the threading of a rodlike unit through a crown ether-like macrocycle and then shrinking the size of the macrocycle's cavity through coordination of a transition-metal ion by a salophen moiety in the macrocycle. The self-assembly of the macrocycle and a thread, followed by addition of palladium acetate, afforded the [2]rotaxane, which contains a palladium(II)-salophen moiety, after counterion exchange. This [2]rotaxane was characterized fully by NMR and IR spectroscopic, mass spectrometric, and elemental and X-ray crystallographic analyses.     

Synthesis of [1]rotaxane via covalent bond formation and its unique fluorescent response by energy transfer in the presence of lithium ion

Although there have been a lot of reports on the synthesis and properties of [n]rotaxanes (mainly n = 2), only a few reports on the synthesis of [1]rotaxane has been published by V?gtle's group and others (see ref 5). Generally speaking, [1]rotaxane might be expected to exhibit properties different from other rotaxanes, because the rotor and the axle in the [1]rotaxane is bound covalently and closely. We report on a novel method to make [1]rotaxanes via covalent bond formation from a macrocyclic compound. That is, we first prepared a bicyclic compound from macrocycle and then proceeded to [1]rotaxane by aminolysis. This is the first synthetic example of preparation of [1]rotaxane via covalent bond formation, not utilizing weak interactions such as hydrogen bonding, charge transfer, via metal complexation, etc. This method might provide a powerful and new tool for construction of [1]rotaxane as a new supramolecular system. In addition, we investigated energy transfer from rotor to axle using [1]rotaxane that we prepared. Energy transfer occurred perfectly from the naphthalene ring of the rotor to the anthracene ring of the axle. We found also that only lithium ion among alkali ions can drastically enhance the fluorescence intensity. This finding could be applicable to ion-sensing systems, switching devices, and so on.     

A Strategy Utilizing a Recyclable Macrocycle Transporter for the Efficient Synthesis of a Triazolium‐Based [2]Rotaxane

A general synthesis of triazolium‐containing [2]rotaxanes, which could not be accessed by other methods, is reported. It is based on a sequential strategy starting from a well‐designed macrocycle transporter which contains a template for dibenzo‐24‐crown‐8 and a N‐hydroxysuccinimide (NHS) moiety. The sequence is: 1) synthesis by slippage of a [2]rotaxane building‐block; 2) its elongation at its NHS end; 3) the delivery of the macrocycle to the elongated part of the axle by an induced translational motion; 4) the contraction process to yield the targeted [2]rotaxane and recycle the initial transporter.     

Homo- and hetero-[3]rotaxanes with two pi-systems clasped in a single macrocycle

Here we present the first synthesis of a [3]rotaxane with two dumbbell components threaded through a single gamma-cyclodextrin macrocycle. This synthesis is carried out in two steps: first one dumbbell is synthesized threaded through the macrocycle to give a [2]rotaxane, then a second dumbbell is synthesized through the remaining cavity of the [2]rotaxane. We have synthesized a hetero- [3]rotaxane with one stilbene and one cyanine dye threaded through gamma-cyclodextrin, which exhibits quantitative energy transfer between the two encapsulated dyes. The stilbene [2]rotaxane intermediate in this synthesis has a remarkably high affinity for suitably shaped hydrophobic guests in aqueous solution, facilitating the synthesis of [3]rotaxanes and suggesting possible applications in sensors.     

Switching "on" and "off" the expression of chirality in peptide rotaxanes

The hydrogen-bond-directed synthesis, X-ray crystal structures, and optical properties of the first chiral peptide rotaxanes are reported. Collectively these systems provide the first examples of single molecular species where the expression of chirality in the form of a circular dichroism (CD) response can selectively be switched "on" or "off", and its magnitude altered, through controlling the interactions between mechanically interlocked submolecular components. The switching is achievable both thermally and through changes in the nature of the environment. Peptido[2]rotaxanes consisting of an intrinsically achiral benzylic amide macrocycle locked onto various chiral dipeptide (Gly-L-Ala, Gly-L-Leu, Gly-L-Met, Gly-L-Phe, and Gly-L-Pro) threads exhibit strong (10-20k deg cm(2) dmol(-1)) negative induced CD (theta;) values in nonpolar solvents (e.g. CHCl(3)), where the intramolecular hydrogen bonding between thread and macrocycle is maximized. In polar solvents (e.g., MeOH), where the intercomponent hydrogen bonding is weakened, or switched off completely, the elliptical polarization falls close to zero in some cases and can even be switched to large positive values in others. Importantly, the mechanism of generating the switchable CD response in the chiral peptide rotaxanes is also determined: a combination of semiempirical calculations and geometrical modeling using the continuous chirality measure (CCM) shows that the chirality is transmitted from the amino acid asymmetric center on the thread via the macrocycle to the C-terminal stopper of the rotaxane. This understanding could have important implications for other areas where chiral transmission from one chemical entity to another underpins a physical or chemical response, such as the seeding of supertwisted nematic liquid crystalline phases or asymmetric synthesis.     

Formation of copper(I)-templated [2]rotaxanes using ��click�� methodology: influence of the base, the thread and the catalyst

Three new copper(I)-assembled [2]rotaxanes incorporating the same macrocycle and different axes containing a bipy, a phen or a terpy have been synthesized thanks to CuAAC reaction for attaching the stoppers. The influence of the nature of the base used for the stoppering reaction was investigated on the formation of the bipy-containing rotaxane. The yield of the [2]rotaxane synthesis was increased when using a phen as a coordinating unit in the thread with [Cu(CH₃CN)₄](PF₆) as catalyst. The strong influence of the nature of the catalyst was clearly evidenced for the formation of the terpy rotaxane, increasing the yield of the stoppering reaction from 0 to 95% by just substituting the Cu(I) catalyst. Finally, the best conditions found for our systems are the use of Na₂CO₃ as a base and Cu(tren??)Br as a catalyst.     

Charge transfer chromophore-stopped [2]rotaxane through [2 + 2] cycloaddition

Three charge-transfer chromophore-terminated [2]rotaxanes were synthesized, using a high-yield [2 + 2]cycloaddition reaction in apolar solvent at room temperature. Two solvent-driving molecular shuttles were constructed, which exhibit distinct conformations in different solvent as a result of the shuttling movement of the macrocycle.     

Equilibrating dynamic [2]rotaxanes

Upon mixing and dehydration, 2,6-diformylpyridine and 2,2'-oxybis(ethylamine) form a dynamic combinatorial library of at least nine members. Through hydrogen bonding and other intermolecular interactions, templating dumbbell molecules select one macrocyclic member of the library, at the expense of all the others, to create [2]rotaxanes. These rotaxanes, however, retain the dynamic character of the library, since a diformylpyridine analogue can exchange with the macrocyclic component in solution. In addition, crystallization of the mixture surprisingly furnishes only the [24]crown-8-like macrocycle on its own--evidence of a kinetic selection process occurring between phase transitions.     

Increased Halide Recognition Strength by Enhanced Intercomponent Preorganisation in Triazolium Containing [2]Rotaxanes

Three triazolium‐based [2]rotaxanes containing different sized axle and macrocycle components were synthesised in good yields (40–57 %) through chloride anion templation. The anion recognition properties of the interlocked receptor systems were investigated using ¹H NMR titration experiments: all three rotaxanes display impressive selectivities for halide anions over the more basic oxoanion acetate. The rotaxanes incorporating shorter, more rigid axle components with aryl‐substituted triazolium groups display substantially higher anion binding affinities than those with longer, bis‐alkyl‐substituted heterocycles, which is attributed to the increased intercomponent preorganisation afforded by the smaller axle component. Computational DFT and molecular dynamics simulations composed of unconstrained and umbrella sampling simulations corroborate the experimental observations.     

Is [N+-H...O] hydrogen bonding the most important noncovalent interaction in macrocycle-dibenzylammonium ion complexes?

We report a new host molecule in which one diethylene glycol chain (i.e., a loop possessing only three oxygen atoms) incorporated along with two phenolic aromatic rings is linked by a xylene spacer into a macroring. The design of the molecular structure of this macrocycle "amplifies" any potential [cation...pi], [N+-H...pi], and [N+C-H...pi] interactions between the dibenzylammonium (DBA+) ion and the phenolic rings of the macrocycle; as such, these species display a very strong binding affinity in CD3NO2 (Ka = 15,000 M(-1)). The macroring also coordinates to bipyridinium ions in a [2]pseudorotaxane fashion, which makes it the smallest macrocycle (i.e., a 25-membered ring) known to complex both DBA+ and bipyridinium ions in solution. To confirm unambiguously that these pseudorotaxanes exist in solution, we synthesized their corresponding interlocked molecules, namely rotaxanes and catenanes.