Coumarin‐3‐Aldehyde as a Scaffold for the Design of Tunable PET‐Modulated Fluorescent Sensors for Neurotransmitters

NeuroSensor 521 (NS521) is a fluorescent sensor for primary‐amine neurotransmitters based on a platform that consists of an aryl moiety appended to position C4 of the coumarin‐3‐aldehyde scaffold. We demonstrate that sensors based on this platform behave as a directly linked donor–acceptor system that operates through an intramolecular acceptor‐excited photoinduced electron transfer (a‐PET) mechanism. To evaluate the PET process, a series of benzene‐ and thiophene‐substituted derivatives were prepared and the photophysical properties, binding affinities, and fluorescence responses toward glutamate, norepinephrine, and dopamine were determined. The calculated energy of the highest occupied molecular orbital (E_HOMO) of the pendant aryl substituents, along with oxidation and reduction potential values derived from the calculated molecular orbital energy values of the platform components, allowed for calculation of the fluorescence properties of the benzene sensor series. Interestingly, the thiophene derivatives did not fit the typical PET model, highlighting the limitations of the method. A new sensor, NeuroSensor 539, displayed enhanced photophysical properties aptly suited for biological imaging. NeuroSensor 539 was validated by selectively labeling and imaging norepinephrine in secretory vesicles of live chromaffin cells.     

A Semiconducting Organic–Inorganic Hybrid Perovskite‐type Non‐ferroelectric Piezoelectric with Excellent Piezoelectricity

Piezoelectric materials are a class of important functional materials applied in high‐voltage sources, sensors, vibration reducers, actuators, motors, and so on. Herein, [(CH₃)₃S]₃[Bi₂Br₉]( 1 ) is a brilliant semiconducting organic–inorganic hybrid perovskite‐type non‐ferroelectric piezoelectric with excellent piezoelectricity. Strikingly, the value of the piezoelectric coefficient d₃₃ is estimated as ≈18 pC N^?1. Such a large piezoelectric coefficient in non‐ferroelectric piezoelectric has been scarcely reported and is comparable with those of typically one‐composition non‐ferroelectric piezoelectrics such as ZnO (3pC N^?1) and much greater than those of most known typical materials. In addition, 1 exhibits semiconducting behavior with an optical band gap of ≈2.58 eV that is lower than the reported value of 3.37 eV for ZnO. This discovery opens a new avenue to exploit molecular non‐ferroelectric piezoelectric and should stimulate further exploration of non‐ferroelectric piezoelectric due to their high stability and low loss characteristics.     

Observing Single‐Molecule Dynamics at Millimolar Concentrations

Single‐molecule fluorescence microscopy is a powerful tool for revealing chemical dynamics and molecular association mechanisms, but has been limited to low concentrations of fluorescent species and is only suitable for studying high affinity reactions. Here, we combine nanophotonic zero‐mode waveguides (ZMWs) with fluorescence resonance energy transfer (FRET) to resolve single‐molecule association dynamics at up to millimolar concentrations of fluorescent species. This approach extends the resolution of molecular dynamics to >100‐fold higher concentrations, enabling observations at concentrations relevant to biological and chemical processes, and thus making single‐molecule techniques applicable to a tremendous range of previously inaccessible molecular targets. We deploy this approach to show that the binding of cGMP to pacemaking ion channels is weakened by a slower internal conformational change.     

CuO–ZnO Micro/Nanoporous Array‐Film‐Based Chemosensors: New Sensing Properties to H2S

CuO–ZnO micro/nanoporous array‐films are synthesized by transferring a solution‐dipped self‐organized colloidal template onto a device substrate and sequent heat treatment. Their morphologies and structures are characterized by X‐ray diffraction, field‐emission scanning electron microscopy, transmission electron microscopy, and X‐ray photoelectron spectrum analysis. Based on the sensing measurement, it is found that the CuO–ZnO films prepared with the composition of [Cu²⁺]/[Zn²⁺]=0.005, 0.01, and 0.05 all show a nice sensitivity to 10 ppm H₂S. Interestingly, three different zones exist in the patterns of gas responses versus H₂S concentrations: a platform zone, a rapidly increasing zone, and a slowly increasing zone. Further experiments show that the hybrid CuO–ZnO porous film sensor exhibits shorter recovery time and better selectivity to H₂S gas against other interfering gases at a concentration of 10 ppm. These new sensing properties may be due to a depletion layer induced by p–n junction between p‐type CuO and n‐type ZnO and high chemical activity of CuO to H₂S. This work will provide a new construction route of ZnO‐based sensing materials, which can be used as H₂S sensors with high performances.     

Synthesis of poly(N‐9‐ethylcarbazole‐exo‐norbornene‐5,6‐dicarboximide) for hole‐transporting layer in hybrid organic light‐emitting devices

We synthesized new polynorbornene dicarboximide (PCaNI) functionalized with hole‐transporting carbazole moieties and its copolymer (PCaNA) by ring‐opening metathesis polymerization (ROMP), where the PCaNA was further reacted with 3‐amino‐triethoxysilane to prepare PCaNI/silica hybrid. We also investigated the feasibility of PCaNI and PCaNI/silica hybrid (PCaSi) as a hole‐transporting material for hybrid organic light emitting devices (HOLEDs). To improve the performance of the PCaNI‐based HOLEDs, N,N′‐diphenyl‐N,N′‐(3‐methylphenyl)‐[1,1′‐biphenyl]‐4‐4′‐diamine (TPD) was also introduced into the PCaNI matrix. Results showed that PCaNI exhibited high glass transition temperature (～260 °C) and high optical transparency in the visible region. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of PCaNI were measured as 5.6 and 2.2 eV, while the TPD‐doped PCaNI showed 5.7 eV (HOMO) and 2.6 eV (LUMO). The PCaNI/silica hybrid nanolayers showed excellent solvent resistance due to the formation of covalent bonds between ITO and PCaNI. The HOLEDs with PCaNI/TPD or PCaSi/TPD hybrid nanolayers exhibited relatively higher luminance (～10,000 cd/m²), lower operating voltage (～6.5 V at 300 cd/m²), and higher current efficiency (～2.7 cd/A). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Photovoltaic properties and femtosecond time‐resolved fluorescence study of polyoxometalate‐containing rod–coil diblock copolymers

The photovoltaic properties and exciton decay dynamics of three polyoxometalate (POM)‐containing hybrid rod–coil diblock copolymers (HDCPs), PS‐Mo6‐PT1–3 , are studied. Single‐component photovoltaic cells of PS‐Mo6‐PT2 and inverted solar cells based on ZnO nanorod arrays/ PS‐Mo6‐PT1–3 are fabricated showing power conversion efficiencies only up to 0.055%. To understand the poor photovoltaic performance, femtosecond fluorescence up‐conversion technique is used to study the exciton decay dynamics of all three HDCPs. Drastically different fluorescence dynamics of the three HDCPs are observed in dilute solutions, which is attributed to the different extent and different type of interpolymer association depending on the P3HT rod block length and the cluster loading ratio. While both cation‐mediated POM cluster association and P3HT‐P3HT π‐stacking contribute significantly to PS‐Mo6‐PT2 aggregation, the aggregation of PS‐Mo6‐PT1 and that of PS‐Mo6‐PT3 is driven predominantly by cluster association and π‐stacking, respectively. In conjunction with the high residual polarization anisotropy, it is concluded that charge transfer from P3HT excitons to POM clusters in all three HDCPs is inefficient. An improved system with direct π‐conjugation between the POM clusters and the rod block addressing this issue has been proposed. © 2013 Wiley Periodicals, 2014 , 52, 122–133     

Determination of thiol compounds by HPLC and fluorescence detection with 1,3,5,7‐tetramethyl‐8‐bromomethyl‐difluoroboradiaza‐s‐indacene

Altered levels of thiols in biological fluids are considered to be an important indicator for several diseases. In this article, 1,3,5,7‐tetramethyl‐8‐bromomethyl‐difluoroboradiaza‐s‐indacene is proposed as a fluorescent derivatization reagent for the determination of thiols including glutathione, cysteine, N‐acetylcysteine, and homocysteine by HPLC. Under the optimized derivatization and separation conditions, a baseline separation of all the four derivatives has been achieved using isocratic elution on an RP C₈ column within 26 min. With fluorescence detection at 505 and 525 nm for the excitation and emission, respectively, the LODs (S/N = 3) are from 0.2 nM (glutathione) to 0.8 nM (cysteine). The feasibility of this method in real samples has been evaluated by the determination of thiols in human plasma from the healthy persons and hypertensive patients with recoveries of 92–105.3%.     

Hydrogen‐bonding interactions in the active site of a low molecular weight protein‐tyrosine phosphatase

Molecular dynamics simulation of the Michaelis complex, phospho‐enzyme intermediate, and the wild‐type and C12S mutant have been carried out to examine hydrogen‐bonding interactions in the active site of the bovine low molecular weight protein‐tyrosine phosphatase (BPTP). It was found that the S_γ atom of the nucleophilic residue Cys‐12 is ideally located at a position opposite from the phenylphosphate dianion for an inline nucleophilic substitution reaction. In addition, electrostatic and hydrogen‐bonding interactions from the backbone amide groups of the phosphate‐binding loop strongly stabilize the thiolate anion, making Cys‐12 ionized in the active site. In the phospho‐enzyme intermediate, three water molecules are found to form strong hydrogen bonds with the phosphate group. In addition, another water molecule can be identified to form bridging hydrogen bonds between the phosphate group and Asp‐129, which may act as the nucleophile in the subsequent phosphate hydrolysis reaction, with Asp‐129 serving as a general base. The structural difference at the active site between the wild‐type and C12S mutant has been examined. It was found that the alkoxide anion is significantly shifted toward one side of the phosphate binding loop, away from the optimal position enjoyed by the thiolate anion of the wild‐type enzyme in an S_N2 process. This, coupled with the high pK_a value of an alcoholic residue, makes the C12S mutant catalytically inactive. These molecular dynamics simulations provided details of hydrogen bonding interactions in the active site of BPTP, and a structural basis for further studies using combined quantum mechanical and molecular mechanical potential to model the entire dephosphorylation reaction by BPTP. © 2000 John Wiley & Sons, Inc. J Comput Chem 21: 1192–1203, 2000     

Structure‐Dependent Electronic Nature of Star‐Shaped Oligothiophenes,Probed by Ensemble and Single‐Molecule Spectroscopy

We have investigated the photophysical properties of star‐shaped oligothiophenes with three terthiophene arms (meta to each other, S3 ) or six terthiophene arms (ortho‐, meta‐, and para‐arranged, S6 ) connected to an ethynylbenzene core to elucidate the relationship between their molecular structure and electronic properties by using a combination of ensemble and single‐molecule spectroscopic techniques. We postulate two different conformations for molecules S3 and S6 on the basis of the X‐ray structure of hexakis(5‐hexyl‐2‐thienlyethynyl)benzene and suggest the coexistence of these conformers by using spectroscopic methods. From the steady‐state spectroscopic data of compound S6 , we show that the exciton is delocalized over the core structure, but that the meta‐linkage in compound S3 prevents the electronic communication between the arms. However, in single‐molecule spectroscopic measurements, we observed that some molecules of compound S3 showed long fluorescence lifetimes (about 1.4 ns) in the fluorescence‐intensity trajectories, which indicated that π electrons were delocalized along the meta linker. Based on these observations, we suggest that the delocalized exciton is intensely sensitive towards the dihedral angle between the core and the adjacent thiophene ring, as well as to the substituted position of the terthiophene arms. Our results highlight that the fluorescence lifetimes of compounds S3 and S6 are strongly correlated with the spatial location of their excitons, which is mainly affected by their conformation, that is, whether the innermost thiophene rings are facing each other or not. More interestingly, we observed that the difference between the degrees of ring‐torsional flexibility of compounds S3 and S6 results in their sharply contrasting fluorescence properties, such as a change in fluorescence intensity as a function of temperature.     

Highly Fluorescent Chiral N‐S‐Doped Carbon Dots from Cysteine: Affecting Cellular Energy Metabolism

Cysteine‐based chiral optically active carbon dots (CDs) and their effects on cellular energy metabolism, which is vital for essential cellular functions, have been barely reported. A green and effective synthesis strategy for chiral N‐S‐doped CDs (fluorescence quantum yield ca. 41.26 %) based on hydrothermal treatment of l ‐ or d ‐cysteine at as low as 60 °C has been developed. This suggested that cysteine was instable in aqueous solutions and acts as a warning for high‐temperature synthesis of nanomaterials using cysteine as stabilizer. Human bladder cancer T24 cells treated with l ‐CDs showed up‐regulated glycolysis, while d ‐CDs had no similar effects. In contrast, no disturbance to the basal mitochondrial aerobic respiration of T24 cells was caused by either chiral CD.     

Redshifted and Near‐infrared Active Analog Pigments Based upon Archaerhodopsin‐3

Archaerhodopsin‐3 (AR3) is a member of the microbial rhodopsin family of hepta‐helical transmembrane proteins, containing a covalently bound molecule of all‐trans retinal as a chromophore. It displays an absorbance band in the visible region of the solar spectrum (λmax 556 nm) and functions as a light‐driven proton pump in the archaeon Halorubrum sodomense. AR3 and its mutants are widely used in neuroscience as optogenetic neural silencers and in particular as fluorescent indicators of transmembrane potential. In this study, we investigated the effect of analogs of the native ligand all‐trans retinal A1 on the spectral properties and proton‐pumping activity of AR3 and its single mutant AR3 (F229S). While, surprisingly, the 3‐methoxyretinal A2 analog did not redshift the absorbance maximum of AR3, the analogs retinal A2 and 3‐methylamino‐16‐nor‐1,2,3,4‐didehydroretinal (MMAR) did generate active redshifted AR3 pigments. The MMAR analog pigments could even be activated by near‐infrared light. Furthermore, the MMAR pigments showed strongly enhanced fluorescence with an emission band in the near‐infrared peaking around 815 nm. We anticipate that the AR3 pigments generated in this study have widespread potential for near‐infrared exploitation as fluorescent voltage‐gated sensors in optogenetics and artificial leafs and as proton pumps in bioenergy‐based applications.     

Cysteine‐Mediated Intracellular Building of Luciferin to Enhance Probe Retention and Fluorescence Turn‐On

The development of sensitive and selective small molecular probes that enable real‐time detection of endogenous cysteine (Cys) has become an attractive topic because of the essential roles played by Cys in controlling the cellular nitrogen balance and in maintaining biological redox homeostasis. Herein, we report a Cys‐specific probe, 2‐cyanobenzothiazol‐6‐yl acrylate (CBTOA), that shows not only fluorescence turn‐on for sensitive detection of endogenous Cys but also enhanced probe retention inside cells for real‐time monitoring of Cys levels upon external stimulation. Cys‐mediated intracellular formation of luciferin from CBTOA was the key strategy leading to this new type of fluorogenic probe. CBTOA showed fast response to Cys in living cells and liver tissue slices with high sensitivity and selectivity. By using CBTOA as a real‐time probe, we were able to monitor the change in Cys levels in living HeLa cells under ROS‐induced oxidative stress as well as in human mesenchymal stem cells during adipogenic differentiation.     

Determination of thiols by capillary micellar electrokinetic chromatography with laser induced fluorescence detection using 1,3,5,7‐tetramethyl‐8‐phenyl‐(4‐iodoacetamido) difluoroboradiaza‐s‐indacene as labeling reagent

A sensitive and effective micellar electrokinetic capillary chromatography with laser‐induced fluorescence detection approach was described for the determination of low molecular‐mass thiols using 1,3,5,7‐tetramethyl‐8‐phenyl‐(4‐iodoacetamido) difluoroboradiaza‐s‐indacene as the labeling reagent. After precolumn derivatization, baseline separation of six thiol compounds including cysteine, glutathione, N‐acetylcysteine, homocysteine, 6‐mercaptopurine, and penicillamine were achieved within 18 min. The optimal running buffer was composed of mixtures involving 25 mM sodium dodecyl sulfate, 25% (v/v) acetonitrile and 15 mM sodium phosphate buffer, pH 7.5. The detection limits (S/N = 3) were found as low as 40 pM under argon ion laser‐induced fluorescence detector (λ_ex/λ_em = 488/520 nm), which were much better than the reported approaches. The accuracy and specificity of this assay for real samples were assured by a standard addition method. The proposed method has been applied to the analysis of thiols both in human plasma and plum flower samples with recoveries of 92.0–109.4%.     

Strong Coupling and Laser Action of Ladder‐Type Oligo(p‐phenylene)s in a Microcavity

We investigate the coupling of ladder‐type quarterphenyl to the photon modes of a dielectric ZrO_x/SiO_x microcavity at ultraviolet wavelengths. For a relatively long cavity (≈10 μm) with high‐reflectivity mirrors (0.998), optically pumped laser action is demonstrated in the weak‐coupling regime. We observe single‐mode operation with a threshold of 0.4 mJ cm^?2. Strong coupling is achieved by using a short λ/2 cavity. We find pronounced anti‐crossing features of the molecular (0,0) and (0,1) vibronic transitions and the cavity mode in angle‐dependent reflectivity measurements providing Rabi splittings of (90±10) meV. All these features occur spectrally resonant to the exciton transition of ZnO demonstrating the potential of ladder‐type oligo(p‐phenylene)s for the construction of inorganic/organic hybrid microcavities.     

Synthesis of poly(benzyl glutamate‐b‐styrene) rod‐coil block copolymers by dual initiation in one pot

We have developed a metal free synthetic pathway to homopolypeptide rod‐coil block copolymers. The concept was proven for the synthesis of poly(benzyl‐L ‐glutamate‐b‐styrene). A dual initiator containing a primary amine and a nitroxide group was used in a macroinitiation approach with high initiation efficiency. Good control over the molecular weight in the ring opening polymerization of benzyl‐L ‐glutamate N‐carboxyanhydride was obtained in DMF at 0 °C yielding poly(benzyl‐L ‐glutamates) with low polydispersities around 1.1. The almost quantitative incorporation of the dual initiator was confirmed by MALDI‐ToF analysis. Macroinitiation of styrene by nitroxide‐mediated controlled radical polymerization yielded the block copolymer with high structural control. The diblock structure was confirmed by molecular weight increase upon macroinitiation by size exclusion chromatography and retention time comparison with homopolymers using gradient polymer elution chromatography. Both polymerizations were also successfully conducted in one pot without intermediate isolation owing to the high compatibility of both polymerization techniques. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3068–3077, 2008     

Fixed‐Component Lanthanide‐Hybrid‐Fabricated Full‐Color Photoluminescent Films as Vapoluminescent Sensors

Full‐color lanthanide (Ln) photoluminescent materials have attracted considerable interest owing to their potential applications in display systems and lighting technologies. Herein, full‐color photoluminescent films have been designed and fabricated facilely with a fixed‐component Ln‐based (Ln=Tb and Eu) polymer hybrid doped with a proton‐sensitive amide‐type β‐diketonated photosensitizer, N‐(2‐pyridinyl)benzoylacetamide (HPBA). The tunable photoluminescence emissions of the films are achieved by changing the amounts of OH^? in the hybrid rather than varying the relative concentrations of the lanthanide ions and photosensitizers, thus representing a new paradigm for full‐color displays. The emission color can also be finely tuned through the variation of the excitation wavelength, and white‐light emission can be achieved when the given film is excited at the visible region (405 nm). The photophysical properties and the mechanisms of the intra‐ and intermolecular energy transfer before and after deprotonation have been investigated in detail. Meanwhile, the films might find application as vapoluminescent sensors due to their good stability, sensitivity, reversibility, and quick response when triggered by a base–acid vapor.     

Aggregation of Poly(γ‐benzyl L‐glutamate)s Followed by Time‐Resolved Emission Anisotropy

Syntheses of poly(γ‐benzyl L ‐glutamate)s (PBLGs) labeled with various fluorophores (tryptophan, dansyl, and anthracene) having different molecular weights are reported. Association of PBLG chains was studied by time‐resolved emission anisotropy in the solvents supporting the aggregation process (1,4‐dioxane and tetrahydrofuran) and in N,N‐dimethylformamide, where the aggregates were not formed. The influence of molecular weight and polymer concentration on PBLG association was studied as well. The limiting emission anisotropy (r_∞) and rotational correlation times (ϕ) were determined. The chain relaxation dynamics were compared with the fluorescence lifetimes of the fluorophores and spectroscopically suitable labels were selected. Tryptophan was found to be an inconvenient fluorophore for the association study of PBLGs because of its short excited‐state lifetime. Dansyl and anthracene fluorophores, however, proved to be suitable labels for the chain dynamics study of PBLGs in solution. The mobilities of PBLG chains in 1,4‐dioxane were slower than those in tetrahydrofuran and N,N‐dimethylformamide because of PBLG association in this solvent.     

A Hybrid Ring‐Opening Metathesis Polymerization Catalyst Based on an Engineered Variant of the β‐Barrel Protein FhuA

A β‐barrel protein hybrid catalyst was prepared by covalently anchoring a Grubbs–Hoveyda type olefin metathesis catalyst at a single accessible cysteine amino acid in the barrel interior of a variant of β‐barrel transmembrane protein ferric hydroxamate uptake protein component A (FhuA). Activity of this hybrid catalyst type was demonstrated by ring‐opening metathesis polymerization of a 7‐oxanorbornene derivative in aqueous solution.     

Self‐Assembled Discrete Molecules for Sensing Nitroaromatics

Efficient sensing of trace amount nitroaromatic (NAC) explosives has become a major research focus in recent time due to concerns over national security as well as their role as environment pollutants. NO₂‐containing electron‐deficient aromatic compounds, such as picric acid (PA), trinitrotoluene (TNT), and dinitrotoluene (DNT), are the common constituents of many commercially available chemical explosives. In this article, we have summarized our recent developments on the rational design of electron‐rich self‐assembled discrete molecular sensors and their efficacy in sensing nitroaromatics both in solution as well as in vapor phase. Several π‐electron‐rich fluorescent metallacycles (squares, rectangles, and tweezers/pincers) and metallacages (trigonal and tetragonal prisms) have been synthesized by means of metal–ligand coordination‐bonding interactions, with enough internal space to accommodate electron‐deficient nitroaromatics at the molecular level by multiple supramolecular interactions. Such interactions subsequently result in the detectable fluorescence quenching of sensors even in the presence of trace quantities of nitroaromatics. The fascinating sensing characteristics of molecular architectures discussed in this article may enable future development of improved sensors for nitroaromatic explosives.