Crystal Adaptronics: Mechanically Reconfigurable Elastic and Superelastic Molecular Crystals

Mechanically reconfigurable molecular crystals—ordered materials that can adapt to variable operating and environmental conditions by deformation, whereby they attain motility or perform work—are quickly shaping a new research direction in materials science, crystal adaptronics. Properties such as elasticity, superelasticity, and ferroelasticity, which are normally related to inorganic materials, and phenomena such as shape‐memory and self‐healing effects, which are well‐established for soft materials, are increasingly being reported for molecular crystals, yet their mechanism, quantification, and relation to the crystal structure of organic crystals are not immediately apparent. This Minireview provides a condensed topical overview of elastic, superelastic, and ferroelastic molecular crystals, new classes of materials that bridge the gap between soft matter and inorganic materials. The occurrence and detection of these unconventional properties, and the underlying structural features of the related molecular materials are discussed and highlighted with selected prominent recent examples.     

Preparation and Application of Fullerene C60‐Polymers in Piezoelectric Quartz Crystal Sensors for Hemoglobin and Olefins

The C60—polycinnamaldehyde (C₆₀—PCA) and C60—polyphenylacetylene (C60—PPA) polymers were synthesized by the Friedel—Craft reaction and applied as piezoelectric (PZ) quartz crystal coating materials. A C60—polycinnamaldehyde (PCA) coated piezoelectric quartz crystal liquid sensor with a homemade computer interface was prepared and applied as a PZ hemoglobin sensor. The adsorption of hemoglobin onto the C60—PCA coated crystal resulted in a decreased oscillating frequency. The variations in crystal frequency were converted to voltage with a frequency to voltage converter, followed by amplification with OPA and data acquisition with an analog to digital converter. The PZ hemoglobin sensor exhibited good sensitivity of 6530 Hz/(mg/mL) with a detection limit at the ppm level for hemoglobin. Further, a C60—polyphenylacetylene (C60—PPA) coated piezoelectric quartz crystal gas sensor with an Intell‐8255 data processing system for various olefin vapors was also made. The aromatic hydrocarbons such as toluene seem to have greater adsorption onto C60—PPA membrane than alkynes, alkenes, and alkanes. The adsorption of polycyclic aromatic hydrocarbons (PAHs) onto the C60—PPA membrane was also examined. The C₆₀—PPA coated PZ crystal gas sensor showed much better sensitivity for PAHs than for other olefins such as toluene, 1‐hexyne and 1‐hexene, and a much larger frequency shift for naphthalene than other PAHs was also found.     

Magnetic Levitation in Chemistry,Materials Science,and Biochemistry

All matter has density. The recorded uses of density to characterize matter date back to as early as ca. 250 BC, when Archimedes was believed to have solved “The Puzzle of The King's Crown” using density.^[1] Today, measurements of density are used to separate and characterize a range of materials (including cells and organisms), and their chemical and/or physical changes in time and space. This Review describes a density‐based technique—magnetic levitation (which we call “MagLev” for simplicity)—developed and used to solve problems in the fields of chemistry, materials science, and biochemistry. MagLev has two principal characteristics—simplicity, and applicability to a wide range of materials—that make it useful for a number of applications (for example, characterization of materials, quality control of manufactured plastic parts, self‐assembly of objects in 3D, separation of different types of biological cells, and bioanalyses). Its simplicity and breadth of applications also enable its use in low‐resource settings (for example—in economically developing regions—in evaluating water/food quality, and in diagnosing disease).     

Oxidation‐Induced C—H Functionalization: A Formal Way for C—H Activation

Cross‐coupling reactions have developed widely and provided a powerful means to synthesize a variety of compounds in each chemical field. The compounds which have C—H bonds are widespread in fossil fuels, chemical raw materials, biologically active molecules, etc. Using these readily‐ available substances as substrates is high atom‐ and step‐economy for cross‐coupling reactions. Over the past decades, our research group focused on finding and developing new strategies for C—H functionalization. Compared with classical C—H activation methods, for example, C—H bonds are deprotonated by strong base or converted into C—M bonds, oxidation‐induced C—H functionalization would be another pathway for C—H bond activation. This perspective shows a brief introduction of our recent works in this oxidation‐induced C—H functionalization. We categorized this approach of these C—H bond activations by the key intermediates, radical cations, radicals and cations.     

Designing Silicates as Deep‐UV Nonlinear Optical (NLO) Materials using Edge‐Sharing Tetrahedra

Discovering new deep‐ultraviolet (DUV) nonlinear optical (NLO) materials is currently a great challenge. The reported DUV NLO materials are almost exclusively borates or phosphates. Silicates—the largest constituent of the earth's crust—are excluded owing to their weak second harmonic generation (SHG) response. We report a silicate, Li₂BaSiO₄, with edge‐sharing LiO₄–SiO₄ tetrahedra that achieves the balance between a short UV absorption edge, below 190 nm, and a large SHG response, 2.8×KDP. The SHG intensity is the largest for silicates without second‐order Jahn–Teller cations, and exceeds that of non‐isomorphic Li₂SrSiO₄ by more than an order of magnitude. As such Li₂BaSiO₄ may be seen as a promising DUV‐UV NLO material. This research indicates that edge‐sharing tetrahedra is a new design parameter for discovering new DUV NLO materials.     

Theoretical Studies on Novel Gridspiroarenes: Structures,Noncovalent Interactions and Reorganization Energies

Organic semiconductor materials with low reorganization energy have various applications such as in organic light‐emitting diodes (OLEDs), organic field‐effect transistor (OFETs) and organic solar cells (OSCs). In this work, we have designed a new class of gridspiroarenes (GS‐SFX and GS‐SITF) with #‐shaped structures, which have novel crisscross geometrical structures compared to widely used spirocyclic arenes—SFX and SITF. The structure electronic properties, adiabatic ionization potentials (IP_a), adiabatic electron affinities (EA_a) and reorganization energies (λ) of GS‐SFX and GS‐SITF have been calculated using density functional theory (DFT) method. The calculated HOMO and LUMO spatial distributions suggest that GS‐SFX and GS‐SITF have better transport properties. The noncovalent interaction analysis shows the weak intramolecular interactions between their arms. The results indicate that the reorganization energies of GS‐SFX and GS‐SITF are significantly reduced compared to the dimer structures—DSFX and DSITF. Furthermore, the GS‐SITF1 which is one of the isomers of GS‐SITF exhibits the lowest values for λ(h) (0.067 eV) and λ(e) (0.153 eV). Therefore, we believe the predicted structure, electronic property, and reorganization energy are good indicator for transport materials. This work has systematically studied the effect of gridization, which provides insights to design organic semiconductor materials with excellent charge transport properties.     

Polymer Networks: From Plastics and Gels to Porous Frameworks

Polymer networks, which are materials composed of many smaller components—referred to as “junctions” and “strands”—connected together via covalent or non‐covalent/supramolecular interactions, are arguably the most versatile, widely studied, broadly used, and important materials known. From the first commercial polymers through the plastics revolution of the 20^th century to today, there are almost no aspects of modern life that are not impacted by polymer networks. Nevertheless, there are still many challenges that must be addressed to enable a complete understanding of these materials and facilitate their development for emerging applications ranging from sustainability and energy harvesting/storage to tissue engineering and additive manufacturing. Here, we provide a unifying overview of the fundamentals of polymer network synthesis, structure, and properties, tying together recent trends in the field that are not always associated with classical polymer networks, such as the advent of crystalline “framework” materials. We also highlight recent advances in using molecular design and control of topology to showcase how a deep understanding of structure–property relationships can lead to advanced networks with exceptional properties.     

Sulfur‐Based Electrodes that Function via Multielectron Reactions for Room‐Temperature Sodium‐Ion Storage

Emerging rechargeable sodium‐ion storage systems—sodium‐ion and room‐temperature sodium–sulfur (RT‐NaS) batteries—are gaining extensive research interest as low‐cost options for large‐scale energy‐storage applications. Owing to their abundance, easy accessibility, and unique physical and chemical properties, sulfur‐based materials, in particular metal sulfides (MS_x) and elemental sulfur (S), are currently regarded as promising electrode candidates for Na‐storage technologies with high capacity and excellent redox reversibility based on multielectron conversion reactions. Here, we present current understanding of Na‐storage mechanisms of the S‐based electrode materials. Recent progress and strategies for improving electronic conductivity and tolerating volume variations of the MS_x anodes in Na‐ion batteries are reviewed. In addition, current advances on S cathodes in RT‐NaS batteries are presented. We outline a novel emerging concept of integrating MS_x electrocatalysts into conventional carbonaceous matrices as effective polarized S hosts in RT‐NaS batteries as well. This comprehensive progress report could provide guidance for research toward the development of S‐based materials for the future Na‐storage techniques.     

Mixed Polyanionic Compounds as Positive Electrodes for Low‐Cost Electrochemical Energy Storage

Low‐cost electrochemical energy storage systems (EESSs) are urgently needed to promote the application of renewable energy sources such as wind and solar energy. In analogy to lithium‐ion batteries, the cost of EESSs depends mainly on charge‐carrier ions and redox centers in electrodes, and their performance is limited by positive electrodes. In this context, this Minireview evaluates several EESS candidates and summarizes the known mixed polyanionic compounds (MPCs)—a family with robust frameworks and large channels for ion storage and migration. After comprehensive analysis, it is pointed out that a deeper exploration of MPCs may generate numerous novel crystallographically interesting compounds and excellent cathode materials for low‐cost energy storage applications.     

Partial Oxidation as a Rational Approach to Kinetic Control in Bioinspired Magnetite Synthesis

Biological systems show impressive control over the shape, size and organization of mineral structures, which often leads to advanced physical properties that are tuned to the function of these materials. Such control is also found in magnetotactic bacteria, which produce—in aqueous medium and at room temperature—magnetite nanoparticles with precisely controlled morphologies and sizes that are generally only accessible in synthetic systems with the use of organic solvents and/or the use of high‐temperature methods. The synthesis of magnetite under biomimetic conditions, that is, in water and at room temperature and using polymeric additives as control agents, is of interest as a green production method for magnetic nanoparticles. Inspired by the process of magnetite biomineralization, a rational approach is taken by the use of a solid precursor for the synthesis of magnetite nanoparticles. The conversion of a ferrous hydroxide precursor, which we demonstrate with cryo‐TEM and low‐dose electron diffraction, is used to achieve control over the solution supersaturation such that crystal growth can be regulated through the interaction with poly‐(α,β)‐dl ‐aspartic acid, a soluble, negatively charged polymer. In this way, stable suspensions of nanocrystals are achieved that show remanence and coercivity at the size limit of superparamagnetism, and which are able to align their magnetic moments forming strings in solution as is demonstrated by cryo‐electron tomography.     

Study on Synthesis and Electrochemical Properties of Nanophase Li-Mo-spinel

Li-Mn-spinel was synthesized using the rheological phase recation method,First,the precursor was prepared by rheological phase reaction.The it was decomposed to form Li-Mn-spine,which was characterized by X-ray diffraction analysis and IR spectra.The particle size of Li-Mn-spinel was determined by the method of the transmission electron microscopy.The synthesized materials are of nanometer size with 30-100nm in the average diameter.The electrochemical properties of the Li-Mn-spinel were also studied.It proved that this method not only provided a simple practicable and effective route for the synthesis of Li-Mn-spinel,but also had many advantages such as lower sintering temperature,shorter sintering time,fine particles and particularly excellent electrochemical performances.     

Activity‐Based Sensing: A Synthetic Methods Approach for Selective Molecular Imaging and Beyond

Emerging from the origins of supramolecular chemistry and the development of selective chemical receptors that rely on lock‐and‐key binding, activity‐based sensing (ABS)—which utilizes molecular reactivity rather than molecular recognition for analyte detection—has rapidly grown into a distinct field to investigate the production and regulation of chemical species that mediate biological signaling and stress pathways, particularly metal ions and small molecules. Chemical reactions exploit the diverse chemical reactivity of biological species to enable the development of selective and sensitive synthetic methods to decipher their contributions within complex living environments. The broad utility of this reaction‐driven approach facilitates application to imaging platforms ranging from fluorescence, luminescence, photoacoustic, magnetic resonance, and positron emission tomography modalities. ABS methods are also being expanded to other fields, such as drug and materials discovery.     

Thermodynamic Parameters of Temperature‐Induced Phase Transition for Brushes onto Nanoparticles: Hydrophilic versus Hydrophobic End‐Groups Functionalization

Quantification of the stimuli‐responsive phase transition in polymers is topical and important for the understanding and development of novel stimuli‐responsive materials. The temperature‐induced phase transition of poly(N‐isopropylacrylamide) (PNIPAm) with one thiol end group depends on the confinement—free polymer or polymer brush—on the molecular weight and on the nature of the second end. This paper describes the synthesis of heterotelechelic PNIPAm of different molecular weights with a thiol end group—that specifically binds to gold nanorods and a hydrophilic NIPAm end group by reversible addition‐fragmentation chain‐transfer polymerization. Proton high‐resolution magic angle sample spinning NMR spectra are used as an indicator of the polymer chain conformations. The characteristics of phase transition given by the transition temperature, entropy, and width of transition are obtained by a two‐state model. The dependence of thermodynamic parameters on molecular weight is compared for hydrophilic and hydrophobic end functional‐free polymers and brushes.     

A Unique Blend of 2‐Fluorenyl‐2‐anthracene and 2‐Anthryl‐2‐anthracence Showing White Emission and High Charge Mobility

White‐light‐emitting materials with high mobility are necessary for organic white‐light‐emitting transistors, which can be used for self‐driven OLED displays or OLED lighting. In this study, we combined two materials with similar structures—2‐fluorenyl‐2‐anthracene (FlAnt) with blue emission and 2‐anthryl‐2‐anthracence (2A) with greenish‐yellow emission—to fabricate OLED devices, which showed unusual solid‐state white‐light emission with the CIE coordinates (0.33, 0.34) at 10 V. The similar crystal structures ensured that the OTFTs based on mixed FlAnt and 2A showed high mobility of 1.56 cm² V⁻¹ s⁻¹. This simple method provides new insight into the design of high‐performance white‐emitting transistor materials and structures.     

An Efficient and Modular Route to Sequence‐Defined Polymers Appended to DNA

Inspired by biological polymers, sequence‐controlled synthetic polymers are highly promising materials that integrate the robustness of synthetic systems with the information‐derived activity of biological counterparts. Polymer–biopolymer conjugates are often targeted to achieve this union; however, their synthesis remains challenging. We report a stepwise solid‐phase approach for the generation of completely monodisperse and sequence‐defined DNA–polymer conjugates using readily available reagents. These polymeric modifications to DNA display self‐assembly and encapsulation behavior—as evidenced by HPLC, dynamic light scattering, and fluorescence studies—which is highly dependent on sequence order. The method is general and has the potential to make DNA–polymer conjugates and sequence‐defined polymers widely available.     

Copper‐Catalyzed Benzylic C—H Functionalization,Oxidation and Cyclization of Methylarenes: Direct Access to 2‐Arylbenzothiazoles

The direct C—H functionalization of methylarenes is of great significance. Herein, a copper‐catalyzed oxidative C—N/C—S bond formation through benzylic C(sp³)—H functionalization, oxidation and cyclization of methylarenes is reported. Various 2‐arylbenzothiazoles have been synthesized in moderate to excellent yields with readily available o‐iodoaniline, potassium sulfide, and methylarenes as raw materials.     

New analysis of the optimization of electromagnetic shielding properties using conducting polymers and a multi‐objective approach

Recently, an approach was proposed to optimize multi‐layer shields of polyaniline–polyurethane (PAni/PU) conducting composites in the microwave band. Though by this method shields for different applications can be obtained which are light‐weight and offer a low percolation threshold, the full potential of the design process could not be tapped since the underlying optimization problem includes only one objective. In this work we go one step beyond and re‐formulate the design problem as a multi‐objective optimization problem (MOP). To be more precise, we involve simultaneously the shielding efficiency as well as the weight and the cost of the material—i.e. all the requirements for modern shielding materials—within the optimization process. After having stated the model we present two possible ways to approximate the solution set—the so‐called Pareto set—and address the related and important decision‐making problem. All steps are demonstrated on a particular three‐layered composite in order to show the applicability of the novel approach. Copyright © 2008 John Wiley & Sons, Ltd.     

Alkali Metal Arenides as a Universal Synthetic Tool for Layered 2D Germanene Modification

The rediscovery of graphene in 2004 has started an enormous chase in the research of 2D materials. A new family of layered 2D materials consisting of the 14th group elements beyond carbon has already been reported. Here, a new methodology in germanene chemistry is presented using germanane (Ge₆H₆) as a stable and easily accessible starting material for effective synthesis of novel germanene derivatives. The modification procedure utilizing strong bases—alkali metal arenides—for deprotonation of germanane and its subsequent functionalization with p‐nitrobenzyl bromide is described. Functionalization of germanene is confirmed by FT‐IR, Raman, and XPS spectroscopy as well as by X‐ray diffraction analysis.     

Solvent‐Assisted Linker Exchange: An Alternative to the De Novo Synthesis of Unattainable Metal–Organic Frameworks

Metal‐organic frameworks (MOFs) have gained considerable attention as hybrid materials—in part because of a multitude of potential useful applications, ranging from gas separation to catalysis and light harvesting. Unfortunately, de novo synthesis of MOFs with desirable function–property combinations is not always reliable and may suffer from vagaries such as formation of undesirable topologies, low solubility of precursors, and loss of functionality of the sensitive network components. The recently discovered synthetic approach coined solvent‐assisted linker exchange (SALE) constitutes a simple to implement strategy for circumventing these setbacks; its use has already led to the generation of a variety of MOF materials previously unobtainable by direct synthesis methods. This Review provides a perspective of the achievements in MOF research that have been made possible with SALE and examines the studies that have facilitated the understanding and broadened the scope of use of this invaluable synthetic tool.     

Nonlinear Optical Switching in Regioregular Porphyrin Covalent Organic Frameworks

Covalent organic frameworks (COFs) have garnered immense scientific interest among porous materials because of their structural tunability and diverse properties. However, the response of such materials toward laser‐induced nonlinear optical (NLO) applications is hardly understood and demands prompt attention. Three novel regioregular porphyrin (Por)‐based porous COFs—Por‐COF‐HH and its dual metalated congeners Por‐COF‐ZnCu and Por‐COF‐ZnNi—have been prepared and present excellent NLO properties. Notably, intensity‐dependent NLO switching behavior was observed for these Por‐COFs, which is highly desirable for optical switching and optical limiting devices. Moreover, the efficient π‐conjugation and charge‐transfer transition in ZnCu‐Por‐COF enabled a high nonlinear absorption coefficient (β=4470 cm/GW) and figure of merit (FOM=σ₁/σ_o, 3565) value compared to other state‐of‐the‐art materials, including molecular porphyrins (β≈100–400 cm/GW), metal–organic frameworks (MOFs; β≈0.3–0.5 cm/GW), and graphene (β=900 cm/GW).