Cuboid Vesicles Formed by Frame‐Guided Assembly on DNA Origami Scaffolds

We describe the use of a frame‐guided assembly (FGA) strategy to construct cuboid and dumbbell‐shaped hetero‐vesicles on DNA origami nanostructure scaffolds. These are achieved by varying the design of the DNA origami scaffolds that direct the distribution of the leading hydrophobic groups (LHG). By careful selection of LHGs, different types of amphiphiles (both polymer and small‐molecule surfactants) were guided to form hetero‐vesicles, demonstrating the versatility of the FGA strategy and its potential to construct asymmetric and dynamic hetero‐vesicle assemblies with complex DNA nano‐scaffolds.     

Construction of Liposomes Mimicking Cell Membrane Structure through Frame‐Guided Assembly

The shape of eukaryotic cells is determined by the cytoskeleton associated with membrane proteins; however, the detailed mechanism of how the integral morphologies with structural stability is generated and maintained is still not fully understood. Here, based on the Frame‐Guided Assembly (FGA) strategy, we successfully prepared hetero‐liposomes with structural composition similar to that of eukaryotic cells by screening a series of transmembrane peptides as the leading hydrophobic groups (LHGs). It was demonstrated that the conformation and transmembrane mode of the LHGs played dominant roles during the FGA process. The FGA liposomes were formed with excellent stability, which may further provide evidence for the cytoskeleton–membrane protein–lipid bilayer model. Taking advantage of the biocompatibility and stability, the FGA liposomes were also applied to prepare novel drug delivery vehicles, which is promising in diagnostic imaging and cancer therapy applications.     

Influence of the polymer structure over self‐assembly and thermo‐responsive properties: The case of PEG‐b‐PCL grafted copolymers via a combination of RAFT and ROP

During the last years, the field of drug delivery has experienced a growing interest toward the so‐called thermo‐responsive polymers: synthetic materials that, due to the specific hydrophilic–lipophilic balance of their repeating units, exhibit a lower critical solution temperature (LCST) in water associated to a characteristic coil–globule transition. In this work, thermo‐responsive amphiphilic block copolymers are synthesized via reversible addition‐fragmentation transfer (RAFT) polymerization starting from thermo‐responsive monomers and a hydrophobic biodegradable macromonomer, oligo(caprolactone)methacrylate (CL₃MA), produced via ring opening polymerization (ROP). The obtained copolymers exhibit an interesting self‐assembly behavior leading to nanoparticles (NPs) as long as temperature is kept below the LCST. Otherwise, once this value is overcome, the destabilization of the NPs causes the formation of hydrophobic superstructures that enhance the release of an entrapped lipophilic drug. This characteristic behavior has been systematically studied and related to the copolymer structure. In particular, the self‐assembly behavior as well as temperature‐triggered NP destabilization have been related to the relative length of the two blocks constituting the copolymers and to their hydrophilic–lipophilic balance (HLB). Finally, the efficacy of the thermo‐responsive triggered drug release has been tested in the case of Paclitaxel (PTX). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2919–2931     

Thermoresponsive polymersome from a double hydrophilic block copolymer

The article describes synthesis and thermally triggered self‐assembly of a Poly (ethylene oxide)‐block‐poly (N‐insopropylacrylamide) (PEO‐b‐PNIPAm) in aqueous medium. At rt, the polymer remains as unimer, however, at lower critical solution temperature (LCST) of PNIPAm (32 °C), it forms a rather large undefined aggregate which at slightly elevated temperature (～40 °C) converges to well defined polymersome structure (Critical aggregation concentration = 0.45 mg/mL) with hydrodynamic diameter of 40–50 nm. By lowering the temperature, initial swelling of the compact vesicle followed by reversible disassembly to unimer was noticed. The polymersome exhibits encapsulation ability to a hydrophilic dye Calcein which can be spontaneously released by lowering the temperature below cloud point. Likewise a hydrophobic dye namely 8‐Anilino‐1‐naphthalenesulfonic acid (ANS) can also be encapsulated and released by thermal trigger. Detail photoluminescence studies reveal ANS dye can be used as a generalized probe molecule for detecting LCST of a thermoresponsive polymer by “fluorescence on” above LCST even by cursory observation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2444–2451     

Biomimetic Polymers Responsive to a Biological Signaling Molecule: Nitric Oxide Triggered Reversible Self‐assembly of Single Macromolecular Chains into Nanoparticles

Novel nitric oxide (NO) responsive monomers (NAPMA and APUEMA) containing o‐phenylenediamine functional groups have been polymerized to form NO‐responsive macromolecular chains as truly biomimetic polymers. Upon exposure to NO—a ubiquitous cellular signaling molecule—the NAPMA‐ and APUEMA‐labeled thermoresponsive copolymers exhibited substantial changes in solubility, clearly characterized by tuneable LCST behavior, thereby inducing self‐assembly into nanoparticulate structures. Moreover, the NO‐triggered self‐assembly process in combination with environmentally sensitive fluorescence dyes could be employed to detect and image endogenous NO.     

Construction of Liposomes Mimicking Cell Membrane Structure through Frame-Guided Assembly

The shape of eukaryotic cells is determined by the cytoskeleton associated with membrane proteins; however, the detailed mechanism of how the integral morphologies with structural stability is generated and maintained is still not fully understood. Here, based on the Frame-Guided Assembly (FGA) strategy, we successfully prepared hetero-liposomes with structural composition similar to that of eukaryotic cells by screening a series of transmembrane peptides as the leading hydrophobic groups (LHGs). It was demonstrated that the conformation and transmembrane mode of the LHGs played dominant roles during the FGA process. The FGA liposomes were formed with excellent stability, which may further provide evidence for the cytoskeleton–membrane protein–lipid bilayer model. Taking advantage of the biocompatibility and stability, the FGA liposomes were also applied to prepare novel drug delivery vehicles, which is promising in diagnostic imaging and cancer therapy applications.     

Temperature‐Directed Micellar Morphological Transformation Using CABC‐Block Copolymers and Its Applications in Encapsulation and Hidden Segment

A temperature‐directed micellar morphological transformation was developed using CABC multi‐block copolymers with a hydrophobic block A, a hydrophilic block B, and a thermally responsive block C with a lower critical solution temperature (LCST). The micellar structure was switched from a star (below LCST) to a flower (above LCST). The transition temperature was tunable in a wide range (11–90 °C) by varying the C monomer composition. The large difference in the loading capacity between the star and flower enabled efficient encapsulation and controlled release of external molecules. Unlike conventional systems, the present star‐to‐flower transformation keeps micellar structures and hence does not liberate polymers but only external molecules selectively. Another application is a hidden functional segment. A functional segment is hidden (shielded) below the LCST and exposed to interact with external molecules or surfaces above the LCST.     

Multi‐stimuli‐responsive self‐immolative polymer assemblies

Self‐immolative polymers (SIPs) undergo depolymerization in response to the cleavage of stimuli‐responsive end‐caps from their termini. Some classes of SIPs, including polycarbamates, have depolymerization rates that depend on environmental factors such as solvent and pH. In previous work, hydrophobic SIPs have been incorporated into amphiphilic block copolymers and used to prepare nanoassemblies. However, stimuli‐responsive hydrophilic blocks have not previously been incorporated. In this work, we synthesized amphiphilic copolymers composed of a hydrophobic polycarbamate SIP block and a hydrophilic poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) block connected by a UV light‐responsive linker end‐cap. It was hypothesized that after assembly of the block copolymers into nanoparticles, chain collapse of the PDMAEMA above its lower critical solution temperature (LCST) might change the environment of the SIP block, thereby altering its depolymerization rate. Self‐assembly of the block copolymers was performed, and the depolymerization of the resulting assemblies was studied by fluorescence spectroscopy, dynamic light scattering, and NMR spectroscopy. At 20 °C, the system exhibited a selective response to the UV light. At 65 °C, above the LCST of PDMAEMA, the systems underwent more rapid depolymerization, suggesting that the increase in rate arising from the higher temperature dominated over environmental effects arising from chain collapse. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1868–1877     

Preparation and Characterization of Temperature-responsive Porous Monoliths

A new temperature‐responsive porous monolith has been prepared by surface‐initiated activators generated by electron transfer atom transfer radical polymerization (AGET ATRP) grafting poly(N‐isopropylacrylamide) (PNIPAAm) within the pores of the porous polymer monolith. The grafting copolymerization was carried out by a method based on a continuous flow‐through technique without special deoxygenation procedure needed in the general ATRP. The addition of ascorbic acid could counteract the oxidation effect of oxygen diffusing into the reaction system. The resulting grafted monolith was characterized by a mercury intrusion method and the size of macropore was 3.65 µm, which was suitable for flow through the monolith for HPLC. The thermally responsive property of the grafted monolith was evaluated by HPLC using steroids with various hydrophobicities as probes. Through determination of retention factor of each steroid on the grafted monolith at different temperatures using water as mobile phase, it was found that the slope of the plot of retention factor of each steroid versus the temperature changed around the low critical solution temperature (LCST, 32°C) of PNIPAAm in water. It was relative to the grafted PNIPAAm temperature sensitivity that a hydrophobic and hydrophilic alternation would take place around its LCST. Based on this thermally responsive property, the grafted monolith was used as stationary phase for HPLC and to separate the steroids using water as mobile phase by changing the column temperature. As a mobile phase, water is much better than organic solvents concerning the environment.     

Facile synthesis of triple‐stimuli (photo/pH/thermo) responsive copolymers of 2‐diazo‐1,2‐naphthoquinone‐mediated poly(N‐isopropylacrylamide‐co‐N‐hydroxymethylacrylamide)

A series of poly(N‐isopropylacrylamide‐co‐N‐hydroxymethylacrylamide) P(NIPAM‐co‐NHMA) copolymers were firstly synthesized via free radical polymerization. Then, the hydrophobic, photosensitive 2‐diazo‐1,2‐naphthoquinone (DNQ) molecules were partially and randomly grafted onto P(NIPAM‐co‐NHMA) backbone through esterification to obtain a triple‐stimuli (photo/pH/thermo) responsive copolymers of P(NIPAM‐co‐NHMA‐co‐DNQMA). UV‐vis spectra showed that the lower critical solution temperature (LCST) of P(NIPAM‐co‐NHMA) ascended with increasing hydrophilic comonomer NHMA molar fraction and can be tailored by pH variation as well. The LCST of the P(NIPAM‐co‐NHMA) went down firstly after DNQ modification and subsequently shifted to higher value after UV irradiation. Meanwhile, the phase transition profile of P(NIPAM‐co‐NHMA‐co‐DNQMA) could be triggered by pH and UV light as expected. Thus, a triple‐stimuli responsive copolymer whose solution properties could be, respectively, modulated by temperature, light, and pH, has been achieved. These stimuli‐responsive properties should be very important for controlled release delivery system. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2763–2773, 2009     

Photochemical modification of the lower critical solution temperature of cinnamoylated poly(N‐2‐hydroxypropylmethacrylamide) in water

Partial modification of the nonionic polymer poly(N‐2‐hydroxy‐propylmethacrylamide) by cinnamate produces stimuli‐responsive copolymers. The hydrophobic character of the cinnamate chromophore induces not only a lower critical solution temperature (LCST) in water, but renders additionally the polymers photoresponsive. For moderate cinnamate contents of 9 mol‐%, the photoisomerization of the trans‐cinnamate to cis‐cinnamate groups allows to switch the LCST by irradiation, whereas for higher cinnamate contents of 21 mol‐%, irradiation leads to intra‐ and intermolecular photocrosslinking.     

Dual Redox and Thermoresponsive Double Hydrophilic Block Copolymers with Tunable Thermoresponsive Properties and Self‐Assembly Behavior

The synthesis, tunable thermoresponsive properties, and self‐assembly of dual redox and thermoresponsive double hydrophilic block copolymers having pendant disulfide linkages (DHBCss) are reported. Well‐defined DHBCss composed of a hydrophilic poly(ethylene oxide) block and a dual thermo‐ and reduction‐responsive random copolymer block containing pendant disulfide linkages are synthesized by atom transfer radical polymerization. Their lower critical solution temperature (LCST) transitions are adjusted through modulating pendant hydrophobic–hydrophilic balance with disulfide–thiol–sulfide chemistry. Further, these DHBCss derivatives are converted to disulfide‐crosslinked nanogels at temperatures above LCST through temperature‐driven self‐assembly and in situ disulfide crosslinking. They exhibit enhanced colloidal stability and further reduction‐responsive degradability, thus demonstrating versatility of dual thermo‐ and reduction‐responsive smart materials.

     

Synthesis of thermo‐responsive 4‐arm star‐shaped porphyrin‐centered poly(N,N‐diethylacrylamide) via reversible addition‐fragmentation chain transfer radical polymerization

Tetrafunctional porphyrins‐containing trithiocarbonate groups were synthesized by an ordinary esterification method. This tetrafunctional porphyrin (TPP‐CTA) could be used as a chain transfer agent in a controlled reversible addition‐fragmentation chain transfer (RAFT) radical polymerization to prepare well‐defined 4‐arm star‐shaped polymers. N,N‐Diethylacrylamide was polymerized using TPP‐CTA in 1,4‐dioxane. Poly(N,N‐diethylacrylamide) (PDEA) is known to be a thermo‐responsive polymer, and exhibits a lower critical solution temperature (LCST) in water. The star‐shaped PDEA polymer (TPP‐PDEA) was therefore also thermo‐responsive, as expected. The LCST of this polymer depended on its concentration in water, as confirmed by turbidity, dynamic light scattering (DLS), static light scattering (SLS), and ¹H NMR measurements. The porphyrin cores were compartmentalized in PDEA shells in aqueous media. Below the LCST, the fluorescence intensity of TPP‐PDEA was about six times larger than that of a water‐soluble low molecular weight porphyrin compound (TSPP), whose fluorescence intensity was independent of temperature. Above the LCST, the fluorescence intensity of TPP‐PDEA decreased, while the intensity was about three times higher than that of TSPP. These observations suggested that interpolymer aggregation occurred due to the hydrophobic interactions of the dehydrated PDEA arm chains above the LCST, with self‐quenching of the porphyrin moieties arising from these interactions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Concurrent Block Copolymer Polymersome Stabilization and Bilayer Permeabilization by Stimuli‐Regulated “Traceless” Crosslinking

The fabrication of block copolymer (BCP) vesicles (polymersomes) exhibiting synchronized covalent crosslinking and bilayer permeabilization remains a considerable challenge as crosslinking typically leads to compromised membrane permeability. Herein it is demonstrated how to solve this dilemma by employing a stimuli‐triggered crosslinking strategy with amphiphilic BCPs containing photolabile carbamate‐caged primary amines. Upon self‐assembling into polymersomes, light‐triggered self‐immolative decaging reactions release primary amine moieties and extensive amidation reactions then occur due to suppressed amine pK_a within hydrophobic milieu. This leads to serendipitous vesicle crosslinking and the process is associated with bilayer hydrophobicity‐to‐hydrophilicity transition and membrane permeabilization.     

Temperature-Directed Micellar Morphological Transformation Using CABC-Block Copolymers and Its Applications in Encapsulation and Hidden Segment

A temperature-directed micellar morphological transformation was developed using CABC multi-block copolymers with a hydrophobic block A, a hydrophilic block B, and a thermally responsive block C with a lower critical solution temperature (LCST). The micellar structure was switched from a star (below LCST) to a flower (above LCST). The transition temperature was tunable in a wide range (11–90 °C) by varying the C monomer composition. The large difference in the loading capacity between the star and flower enabled efficient encapsulation and controlled release of external molecules. Unlike conventional systems, the present star-to-flower transformation keeps micellar structures and hence does not liberate polymers but only external molecules selectively. Another application is a hidden functional segment. A functional segment is hidden (shielded) below the LCST and exposed to interact with external molecules or surfaces above the LCST.     

Tunable phase‐separation behavior of thermoresponsive polyampholytes through molecular design

Here, we report that carboxylated poly‐l ‐lysine, a polyampholyte, shows lower critical solution temperature (LCST)‐type temperature‐responsive liquid–liquid phase separation and coacervate formation in aqueous solutions. The phase‐separation temperature of polyampholytes is strongly affected by the polymer concentration, balance between the carboxyl and amino groups, hydrophobicity of the side chain, and NaCl concentration in the solution. We concluded that the phase separation was caused by both electrostatic interactions between the carboxyl and amino groups and intermolecular hydrophobic interactions. The addition of NaCl weakened the electrostatic interactions, causing the two phases to remix. The introduction of the hydrophobic moiety decreased the phase‐separation temperature by making the molecular interactions stronger. Finally, temperature‐responsive hydrogels were prepared from the polyampholytes to explore their applicability as biomaterials and in drug delivery systems. The fine‐tuning of the phase‐separation temperature of poly‐l ‐lysine‐based polyampholytes through molecular design should open new avenues for their use in precisely controlled biomedical applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 876–884     

Synthesis and supramolecular self‐assembly of thermosensitive amphiphilic star copolymers based on a hyperbranched polyether core

A novel amphiphilic thermosensitive star copolymer with a hydrophobic hyperbranched poly (3‐ethyl‐3‐(hydroxymethyl)oxetane) (HBPO) core and many hydrophilic poly(2‐(dimethylamino) ethyl methacrylate) (PDMAEMA) arms was synthesized and used as the precursor for the aqueous solution self‐assembly. All the copolymers directly aggregated into core–shell unimolecular micelles (around 10 nm) and size‐controllable large multimolecular micelles (around 100 nm) in water at room temperature, according to pyrene probe fluorescence spectrometry and ¹H NMR, TEM, and DLS measurements. The star copolymers also underwent sharp, thermosensitive phase transitions at a lower critical solution temperature (LCST), which were proved to be originated from the secondary aggregation of the large micelles driven by increasing hydrophobic interaction due to the dehydration of PDMAEMA shells on heating. A quantitative variable temperature NMR analysis method was designed by using potassium hydrogen phthalate as an external standard and displayed great potential to evaluate the LCST transition at the molecular level. The drug loading and temperature‐dependent release properties of HBPO‐star‐PDMAEMA micelles were also investigated by using indomethacin as a model drug. The indomethacin‐loaded micelles displayed a rapid drug release at a temperature around LCST. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 668–681, 2008     

Poly(ether tert‐amine): A novel family of multiresponsive polymer

A novel multiresponsive poly(ether tert‐amine) (PEA) was synthesized by nucleophilic addition/ring‐opening reaction of commercial poly(ethylene oxide) (PEO), poly(propylene oxide) (PPO), and di‐epoxy and di‐amine monomer. The process of synthesis was very simple and green in ethanol as reactive media. These PEAs exhibit sharp response to temperature, pH, and ionic strength, with adjustable and sharp phase transitions in the range of 27–100 °C. The lower critical solution temperature (LCST) of PEA's aqueous solution presents a linear relationship to the PEO content (y = 35.7 + x), indicating well‐tunable LCST. The concentration of PEA has no obvious effect on LCST. Therefore, PEA will be potential in applications of drug delivery, separation, and biotechnology. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1292–1297, 2009     

Multicompartmental Microcapsules with Orthogonal Programmable Two‐Way Sequencing of Hydrophobic and Hydrophilic Cargo Release

Multicompartmental responsive microstructures with the capability for the pre‐programmed sequential release of multiple target molecules of opposite solubility (hydrophobic and hydrophilic) in a controlled manner have been fabricated. Star block copolymers with dual‐responsive blocks (temperature for poly(N‐isopropylacrylamide) chains and pH for poly(acrylic acid) and poly(2‐vinylpyridine) arms) and unimolecular micellar structures serve as nanocarriers for hydrophobic molecules in the microcapsule shell. The interior of the microcapsule can be loaded with water‐soluble hydrophilic macromolecules. For these dual‐loaded microcapsules, a programmable and sequential release of hydrophobic and hydrophilic molecules from the shell and core, respectively, can be triggered independently by temperature and pH variations. These stimuli affect the hydrophobicity and chain conformation of the star block copolymers to initiate out‐of‐shell release (elevated temperature), or change the overall star conformation and interlayer interactions to trigger increased permeability of the shell and out‐of‐core release (pH). Reversing stimulus order completely alters the release process.     

Thermoresponsive Polymer Brush Modulation on the Direction of Motion of Phoretically Driven Janus Micromotors

We report a thermoresponsive poly(N‐isopropylacrylamide) (PNIPAM) brush functionalized Janus Au–Pt bimetallic micromotor capable of modulating the direction of motion with the change of the ambient temperature. The PNIPAM@Au–Pt micromotor moved along the Au–Pt direction with a speed of 8.5 μm s^?1 in 1.5 % H₂O₂ at 25 °C (below the lower critical solution temperature (LCST) of PNIPAM), whereas it changed the direction of motion (i.e., along the Pt–Au direction) and the speed decreased to 2.3 μm s^?1 at 35 °C (above LCST). Below LCST, PNIPAM brushes grafted on the Au side were hydrophilic and swelled, which permitted the electron transfer and proton diffusion on the Au side, and thus the motion is regarded as a self‐electrophoretic mechanism. However, PNIPAM brushes above LCST became hydrophobic and collapsed, and thus the driving mechanism switched to the self‐diffusiophoresis like that of Pt‐modified Janus silica motors. These motors could reversibly change the direction of motion with the transition of the hydrophobic and hydrophilic states of the grafted PNIPAM brushes. Such a thermoresponsive polymer brush functionalization method provides a new strategy for engineering the kinematic behavior of phoretically driven micro/nanomotors.