Divergent Pathways Involving 1,3‐Dipolar Addition and N−N Bond Splitting of an Organic Azide across a Zirconium Methylidene

The zirconium methylidene (PNP)Zr=CH₂(OAr) ( 1 ) reacts with N₃Ad to give two products (PNP)Zr=NAd(OAr) ( 2 ) and (PNP)Zr(η²‐N=NAd)(N=CH₂)(OAr) ( 3 ), both resulting from a common cycloaddition intermediate (PNP)Zr(CH₂N₃Ad)(OAr) ( A ). Using a series of control experiments in combination with DFT calculations, it was found that 2 results from a nitrene by a carbene metathesis reaction in which N₂ acts as a delivery vehicle and forms N₂CH₂ as a side product. In the case of 3 , N−N bond splitting of the azide at the α‐position allowed the isolation of a rare example of a parent ketimide complex of zirconium. Isotopic labeling studies and solid‐state X‐ray analysis are presented for 2 and 3 , in addition to an independent synthesis for the former.     

Diimido‐, Imido(oxo)‐, Dioxo‐ und Imido(alkyliden)‐Halbsandwich‐Verbindungen über selektive Hydrolyse und α—H‐Abstraktion an Organylkomplexen des sechswertigen Molybdäns und Wolframs

Diimido, Imido Oxo, Dioxo, and Imido Alkylidene Halfsandwich Compounds via Selective Hydrolysis and α—H Abstraction in Molybdenum(VI) and Tungsten(VI) Organyl Complexes Organometal imides [(η⁵‐C₅R₅)M(NR′)₂Ph] (M = Mo, W, R = H, Me, R′ = Mes, tBu) 4 — 8 can be prepared by reaction of halfsandwich complexes [(η⁵‐C₅R₅)M(NR′)₂Cl] with phenyl lithium in good yields. Starting from phenyl complexes 4 — 8 as well as from previously described methyl compounds [(η⁵‐C₅Me₅)M(NtBu)₂Me] (M = Mo, W), reactions with aqueous HCl lead to imido(oxo) methyl and phenyl complexes [(η⁵‐C₅Me₅)M(NtBu)(O)(R)] M = Mo, R = Me ( 9 ), Ph ( 10 ); M = W, R = Ph ( 11 ) and dioxo complexes [(η⁵‐C₅Me₅)M(O)₂(CH₃)] M = Mo ( 12 ), M = W ( 13 ). Hydrolysis of organometal imides with conservation of M‐C σ and π bonds is in fact an attractive synthetic alternative for the synthesis of organometal oxides with respect to known strategies based on the oxidative decarbonylation of low valent alkyl CO and NO complexes. In a similar manner, protolysis of [(η⁵‐C₅H₅)W(NtBu)₂(CH₃)] and [(η⁵‐C₅Me₅)Mo(NtBu)₂(CH₃)] by HCl gas leads to [(η⁵‐C₅H₅)W(NtBu)Cl₂(CH₃)] 14 und [(η⁵‐C₅Me₅)Mo(NtBu)Cl₂(CH₃)] 15 with conservation of the M‐C bonds. The inert character of the relatively non‐polar M‐C σ bonds with respect to protolysis offers a strategy for the synthesis of methyl chloro complexes not accessible by partial methylation of [(η⁵‐C₅R₅)M(NR′)Cl₃] with MeLi. As pure substances only trimethyl compounds [(η⁵‐C₅R₅)M(NtBu)(CH₃)₃] 16 ‐ 18 , M = Mo, W, R = H, Me, are isolated. Imido(benzylidene) complexes [(η⁵‐C₅Me₅)M(NtBu)(CHPh)(CH₂Ph)] M = Mo ( 19 ), W ( 20 ) are generated by alkylation of [(η⁵‐C₅Me₅)M(NtBu)Cl₃] with PhCH₂MgCl via α‐H abstraction. Based on nmr data a trend of decreasing donor capability of the ligands [NtBu]^2— > [O]^2— > [CHR]^2— ? 2 [CH₃]^— > 2 [Cl]^— emerges.     

Synthesis and characterization of heterobimetallic mixed-ligand complexes containing Zr(μ-OPri)2Al bridging units

Interesting varieties of heterobimetallic mixed-ligand complexes [Zr{M(OPrⁱ) _n }₂ (L)] (where M = Al, n = 4, L = OC₆H₄CH = NCH₂CH₂O (1); M = Nb, n = 6, L = OC₆H₄CH = NCH₂CH₂O (2); M = Al, n = 4, L = OC₁₀H₆CH = NCH₂CH₂O (3); M = Nb, n = 6, L = OC₁₀H₆CH = NCH₂CH₂O (4)), [Zr{Al(OPrⁱ)₄}₂Cl(OAr)] (where Ar = C₆H₃Me₂-2,5 (5); Ar = C₆H₂Me-4-Bu₂-2,6 (6), [Zr{Al(OPrⁱ)₄}₂(OAr)₂] (where Ar = C₆H₃Me₂-2,5 (7); Ar = C₆H₂Me-4-Bu₂-2,6 (8), [Zr{Al(OPrⁱ)₄}₃(OAr)] (where Ar = C₆H₃Me₂-2,5 (9); Ar = C₆H₃Me₂-2,6 (10), [ZrAl(OPrⁱ)_7-n (ON=CMe₂) _n ] (where n = 4 (11); n = 7 (12), [ZrAl₂(OPrⁱ)_10-n (ON=CMe₂) _n ] (where n = 4 (13); n = 6 (14); n = 10 (15) and [Zr{Al(OPrⁱ)₄}₂{ON=CMe(R)} _n Cl_2–n] [where n = 1, R = Me (16); n = 2, R = Me (17); n = 1, R = Et (18); n = 2, R = Et (19)] have been prepared either by the salt elimination method or by alkoxide-ligand exchange. All of these heterobimetallic complexes have been characterized by elemental analyses, molecular weight measurements, and spectroscopic (I.r., ¹H-, and ²⁷Al- n.m.r.) studies.     

Four‐Membered Heterometallacyclic d0 and d1 Complexes of Group 4 Metallocenes with Amidato Ligands

A study of the coordination chemistry of different amidato ligands [(R)N?C(Ph)O] (R=Ph, 2,6‐diisopropylphenyl (Dipp)) at Group 4 metallocenes is presented. The heterometallacyclic complexes [Cp₂M(Cl){κ²‐N,O‐(R)N?C(Ph)O}] M=Zr, R=Dipp ( 1 a ), Ph ( 1 b ); M=Hf, R=Ph ( 2 )) were synthesized by reaction of [Cp₂MCl₂] with the corresponding deprotonated amides. Complex 1 a was also prepared by direct deprotonation of the amide with Schwartz reagent [Cp₂Zr(H)Cl]. Salt metathesis reaction of [Cp₂Zr(H)Cl] with deprotonated amide [(Dipp)N?C(Ph)O] gave the zirconocene hydrido complex [Cp₂M(H){κ²‐N,O‐(Dipp)N?C(Ph)O}] ( 3 ). Reaction of 1 a with Mg did not result in the desired Zr(III) complex but in formation of Mg complex [(py)₃Mg(Cl) {κ²‐N,O‐(Dipp)N?C(Ph)O}] ( 4 ; py=pyridine). The paramagnetic complexes [Cp′₂Ti{κ²‐N,O‐(R)N?C(Ph)O}] (Cp′=Cp, R=Ph ( 7 a ); Cp′=Cp, R=Dipp ( 7 b ); Cp′=Cp*, R=Ph ( 8 )) were prepared by the reaction of the known titanocene alkyne complexes [Cp₂′Ti(η²‐Me₃SiC₂SiMe₃)] (Cp′=Cp ( 5 ), Cp′=Cp* ( 6 )) with the corresponding amides. Complexes 1 a , 2 , 3 , 4 , 7 a , 7 b , and 8 were characterized by X‐ray crystallography. The structure and bonding of complexes 7 a and 8 were also characterized by EPR spectroscopy.     

3‐Rhoda‐1,2‐diazacyclopentanes: A Series of Novel Metallacycle Complexes Derived From CN Functionalization of Ethylene

Rh‐containing metallacycles, [(TPA)Rh^III(κ²‐(C,N)‐CH₂CH₂(NR)₂‐]Cl; TPA=N,N,N,N‐tris(2‐pyridylmethyl)amine have been accessed through treatment of the Rh^I ethylene complex, [(TPA)Rh(η²‐CH₂CH₂)]Cl ([ 1 ]Cl) with substituted diazenes. We show this methodology to be tolerant of electron‐deficient azo compounds including azo diesters (RCO₂N?NCO₂R; R=Et [ 3 ]Cl, R=iPr [ 4 ]Cl, R=tBu [ 5 ]Cl, and R=Bn [ 6 ]Cl) and a cyclic azo diamide: 4‐phenyl‐1,2,4‐triazole‐3,5‐dione (PTAD), [ 7 ]Cl. The latter complex features two ortho‐fused ring systems and constitutes the first 3‐rhoda‐1,2‐diazabicyclo[3.3.0]octane. Preliminary evidence suggests that these complexes result from N–N coordination followed by insertion of ethylene into a [Rh]?N bond. In terms of reactivity, [ 3 ]Cl and [ 4 ]Cl successfully undergo ring‐opening using p‐toluenesulfonic acid, affording the Rh chlorides, [(TPA)Rh^III(Cl)(κ¹‐(C)‐CH₂CH₂(NCO₂R)(NHCO₂R)]OTs; [ 13 ]OTs and [ 14 ]OTs. Deprotection of [ 5 ]Cl using trifluoroacetic acid was also found to give an ethyl substituted, end‐on coordinated diazene [(TPA)Rh^III(κ²‐(C,N)‐CH₂CH₂(NH)₂‐]⁺ [ 16 ]Cl, a hitherto unreported motif. Treatment of [ 16 ]Cl with acetyl chloride resulted in the bisacetylated adduct [(TPA)Rh^III(κ²‐(C,N)‐CH₂CH₂(NAc)₂‐]⁺, [ 17 ]Cl. Treatment of [ 1 ]Cl with AcN?NAc did not give the Rh?N insertion product, but instead the N,O‐chelated complex [(TPA)Rh^I ( κ²‐(O,N)‐CH₃(CO)(NH)(N?C(CH₃)(OCH?CH₂))]Cl [ 23 ]Cl, presumably through insertion of ethylene into a [Rh]?O bond.     

Highly Strained Heterometallacycles of Group 4 Metallocenes with Bis(diphenylphosphino)amide Ligands

A study regarding coordination chemistry of the bis(diphenylphosphino)amide ligand Ph₂P‐N‐PPh₂ at Group 4 metallocenes is presented herein. Coordination of N,N‐bis(diphenylphosphino)amine ( 1 ) to [(Cp₂TiCl)₂] (Cp=η⁵‐cyclopentadienyl) generated [Cp₂Ti(Cl)P(Ph₂)N(H)PPh₂] ( 2 ). The heterometallacyclic complex [Cp₂Ti(κ²‐P,P‐Ph₂P‐N‐PPh₂)] ( 3 Ti ) can be prepared by reaction of 2 with n‐butyllithium as well as from the reaction of the known titanocene–alkyne complex [Cp₂Ti(η²‐Me₃SiC₂SiMe₃)] with the amine 1 . Reactions of the lithium amide [(thf)₃Li{N(PPh₂)₂}] with [Cp₂MCl₂] (M=Zr, Hf) yielded the corresponding zirconocene and hafnocene complexes [Cp₂M(Cl){κ²‐N,P‐N(PPh₂)₂}] ( 4 Zr and 4 Hf ). Reduction of 4 Zr with magnesium gave the highly strained heterometallacycle [Cp₂Zr(κ²‐P,P‐Ph₂P‐N‐PPh₂)] ( 3 Zr ). Complexes 2 , 3 Ti , 4 Hf , and 3 Zr were characterized by X‐ray crystallography. The structures and bondings of all complexes were investigated by DFT calculations.     

Oxygen Reduction with a Bifunctional Iridium Dihydride Complex

The iridium dihydride [Ir(H)₂(HPNP)]⁺ (PNP=N(CH₂CH₂PtBu₂)₂) reacts with O₂ to give the unusual, square‐planar iridium(III) hydroxide [Ir(OH)(PNP)]⁺ and water. Regeneration of the dihydride with H₂ closes a quasi‐catalytic synthetic oxygen‐reduction reaction (ORR) cycle that can be run several times. Experimental and computational examinations are in agreement with an oxygenation mechanism via rate‐limiting O₂ coordination followed by H‐transfer at a single metal site, facilitated by the cooperating pincer ligand. Hence, the four electrons required for the ORR are stored within the two covalent M? H bonds of a mononuclear metal complex.     

Sekundäre Hydroxyalkylphosphane: Synthese und Charakterisierung mono‐, bis‐ und trisalkoxyphosphan‐substituierter Zirconiumkomplexe und des heterobimetallischen Dreikernkomplexes [Cp2Zr{O(CH2)3PHMes(AuCl)}2]

Secondary Hydroxyalkylphosphanes: Synthesis and Characterization of Mono‐, Bis‐ and Trisalkoxyphosphane‐substituted Zirconium Complexes and the Heterobimetallic Trinuclear Complex [Cp₂Zr{O(CH₂)₃PHMes(AuCl)}₂] The secondary hydroxyalkylphosphanes RPHCH₂OH [R = 2,4,6‐Me₃C₆H₂ (Mes) ( 1 ), 2,4,6‐ⁱPr₃C₆H₂ (Tipp) ( 2 )], 1‐AdPH‐2‐OH‐cyclo‐C₆H₁₀ ( 3 ) and RPH(CH₂)₃OH [R = Ph ( 4 ), Mes ( 5 ), Tipp ( 6 ), Cy ( 7 ), ^tBu ( 8 )] were obtained from primary phosphanes RPH₂ and formaldehyde ( 1 , 2 ) or from LiPHR and cyclohexene oxide ( 3 ) or trimethylene oxide ( 4 ‐ 8 ). Starting from 5 or 7 and [Cp^R₂ZrMe₂] [Cp^R = C₅EtMe₄ (Cp°), C₅H₅ (Cp), C₅MeH₄ (Cp′)], the monoalkoxyphosphane‐substituted zirconocene complexes [Cp^R₂Zr(Me){O(CH₂)₃PHMes}] [Cp^R = Cp° ( 9 ), Cp ( 10 )] were prepared. With [Cp^R₂ZrCl₂], the bisalkoxyphosphane‐substituted complexes [Cp′₂Zr{O(CH₂)₃PHMes}₂] ( 11 ) and [Cp₂Zr{O(CH₂)₃PHCy}₂] ( 12 ) are obtained, and with [Tp^RZrCl₃], the trisalkoxyphosphane‐substituted zirconium complexes [Tp^RZr{O(CH₂)₃PHMes}₃] [Tp^R = trispyrazolylborato (Tp) ( 13 ), Tp^R = tris(3,5‐dimethyl)pyrazolylborato (Tp*) ( 14 )] are prepared. The reaction of 5 with [AuCl(tht)] (tht = tetrahydrothiophene) yielded the mononuclear complex [AuCl{PHMes(CH₂)₃OH}] ( 15 ). The trinuclear complex [Cp₂Zr{O(CH₂)₃PHMes(AuCl)}₂] ( 16 ) was obtained from [Cp₂ZrCl₂] and 15 . Compounds 1 ‐ 16 were characterized spectroscopically (¹H‐, ³¹P‐, ¹³C‐NMR; IR; MS) and compound 2 also by crystal structure determination. The bis‐ and trisalkoxyphosphane‐substituted complexes 11‐14 and 16 were obtained as mixtures of two diastereomers which could not be separated.     

Iron Borohydride Pincer Complexes for the Efficient Hydrogenation of Ketones under Mild,Base‐Free Conditions: Synthesis and Mechanistic Insight

The new, structurally characterized hydrido carbonyl tetrahydridoborate iron pincer complex [(iPr‐PNP)Fe(H)(CO)(η¹‐BH₄)] ( 1 ) catalyzes the base‐free hydrogenation of ketones to their corresponding alcohols employing only 4.1 atm hydrogen pressure. Turnover numbers up to 1980 at complete conversion of ketone were reached with this system. Treatment of 1 with aniline (as a BH₃ scavenger) resulted in a mixture of trans‐[(iPr‐PNP)Fe(H)₂(CO)] ( 4 a ) and cis‐[(iPr‐PNP)Fe(H)₂(CO)] ( 4 b ). The dihydrido complexes 4 a and 4 b do not react with acetophenone or benzaldehyde, indicating that these complexes are not intermediates in the catalytic reduction of ketones. NMR studies indicate that the tetrahydridoborate ligand in 1 dissociates prior to ketone reduction. DFT calculations show that the mechanism of the iron‐catalyzed hydrogenation of ketones involves alcohol‐assisted aromatization of the dearomatized complex [(iPr‐PNP*)Fe(H)(CO)] ( 7 ) to initially give the Fe⁰ complex [(iPr‐PNP)Fe(CO)] ( 21 ) and subsequently [(iPr‐PNP)Fe(CO)(EtOH)] ( 38 ). Concerted coordination of acetophenone and dual hydrogen‐atom transfer from the PNP arm and the coordinated ethanol to, respectively, the carbonyl carbon and oxygen atoms, leads to the dearomatized complex [(iPr‐PNP*)Fe(CO)(EtO)(MeCH(OH)Ph)] ( 32 ). The catalyst is regenerated by release of 1‐phenylethanol, followed by dihydrogen coordination and proton transfer to the coordinated ethoxide ligand.     

Syntheses and Molecular Structures of [(thf)4Li] [{(thf)Li}M(C4H8)3] (M = Zr,Hf) and Their Solution Behavior

The reaction of MCl₄(thf)₂ (M = Zr, Hf) with 1,4-dilitiobutane in diethyl ether at –25 °C or at 0 °C with a molar ratio of 1 : 3 yields the homoleptic “ate” complexes [(thf)₄Li] [{(thf)Li}M(C₄H₈)₃] 1 - Zr (M = Zr) and 1 - Hf (M = Hf). The crystalline compounds form ion lattices with solvent-separated [(thf)₄Li]⁺ cations and [{(thf)Li}M(C₄H₈)₃]^– anions. The NMR spectra at –20 °C show magnetic equivalence of the M–CH₂ and of the β-CH₂ groups of the butane-1,4-diide ligands on the NMR time scale. Analogous reactions of MCl₄(thf)₂ with 1,4-dilithiobutane with a molar ratio of 1 : 2 proceed unclear. However, single crystals of [Li(thf)₄] [HfCl₅(thf)] ( 2 ) can be isolated with the hafnium atom in a distorted octahedral coordination sphere of five chloro and one thf ligand. NMR spectra allow to elucidate the time-dependent degradation of 1-Hf and 1-Zr in THF and toluene at 25 °C via THF cleavage. Addition of tmeda to a solution of 1-Zr allows the isolation of intermediately formed [{(tmeda)Li}₂Zr(nBu)₂(C₄H₈)₂] ( 3 ).     

Ligand‐Centred Reactivity of Bis(picolyl)amine Iridium: Sequential Deprotonation,Oxidation and Oxygenation of a “Non‐Innocent” Ligand

Treatment of [Ir(bpa)(cod)]⁺ complex [ 1 ]⁺ with a strong base (e.g., tBuO^?) led to unexpected double deprotonation to form the anionic [Ir(bpa?2H)(cod)]^? species [ 3 ]^?, via the mono‐deprotonated neutral amido complex [Ir(bpa?H)(cod)] as an isolable intermediate. A certain degree of aromaticity of the obtained metal–chelate ring may explain the favourable double deprotonation. The rhodium analogue [ 4 ]^? was prepared in situ. The new species [M(bpa?2H)(cod)]^? (M=Rh, Ir) are best described as two‐electron reduced analogues of the cationic imine complexes [M^I(cod)(Py‐CH₂‐N?CH‐Py)]⁺. One‐electron oxidation of [ 3 ]^? and [ 4 ]^? produced the ligand radical complexes [ 3 ]^. and [ 4 ]^.. Oxygenation of [ 3 ]^? with O₂ gave the neutral carboxamido complex [Ir(cod)(py‐CH₂‐N‐CO‐py)] via the ligand radical complex [ 3 ]^. as a detectable intermediate.     

Metal Complexes with Biologically Important Ligands. CLXVI Tetracarbonyl Complexes of Chromium(0) and Molybdenum(0) with Schiff Bases from Pyridine‐2‐carboxaldehyde and α‐Amino Acid Esters as N,N‐Chelate Ligands

The complexes [M(CO)₄(pyridyl‐CH=N‐CHRCO₂R′)] (M = Cr, Mo; R = H, CH₃, CH(CH₃)₂, CH₂CH(CH₃)₂) were obtained by reaction of the Schiff bases from pyridine‐2‐carboxaldehyde and glycine, L‐alanine, L‐valine or L‐leucine esters with the norbornadiene complexes [M(CO)₄(nbd)] and were characterized by IR, ¹H and ¹³C NMR and UV‐vis spectra. The deeply colored complexes exhibit solvatochromism.     

Metallkomplexe mit biologisch wichtigen Liganden. CLVII [1] Halbsandwich‐Komplexe mit Isocyanoacetylaminosäureestern und Isocyanoacetyldi‐ und tripeptidestern („Isocyano‐Peptide”︁)

Metal Complexes of Biologically Important Ligands, CLVII [1] Halfsandwich Complexes of Isocyanoacetylamino acid esters and of Isocyanoacetyldi‐ and tripeptide esters (?Isocyanopeptides”?) N‐Isocyanoacetyl‐amino acid esters CNCH₂C(O) NHCH(R)CO₂CH₃ (R = CH₃, CH(CH₃)₂, CH₂CH(CH₃)₂, CH₂C₆H₅) and N‐isocyanoacetyl‐di‐ and tripeptide esters CNCH₂C(O)NHCH(R¹)C(O)NHCH(R²)CO₂C₂H₅ and CNCH₂C(O)NHCH(R¹)C(O)NHCH (R²)C(O)NHCH(R³)CO₂CH₃ (R¹ = R² = R³ = CH₂C₆H₅, R² = H, CH₂C₆H₅) are available by condensation of potassium isocyanoacetate with amino acid esters or peptide esters. These isocyanides form with chloro‐bridged complexes [(arene)M(Cl)(μ‐Cl)]₂ (arene = Cp*, p‐cymene, M = Ir, Rh, Ru) in the presence of Ag[BF₄] or Ag[CF₃SO₃] the cationic halfsandwich complexes [(arene)M(isocyanide)₃]⁺X^? (X = BF₄, CF₃SO₃).     

α‐Propargyl amino acid‐derived optically active novel substituted polyacetylenes: Synthesis,secondary structures,and responsiveness to ions

Novel optically active substituted acetylenes HC? CCH₂CR¹(CO₂CH₃)NHR² [(S)‐/(R)‐ 1 : R¹ = H, R² = Boc, (S)‐ 2 : R¹ = CH₃, R² = Boc, (S)‐ 3 : R¹ = H, R² = Fmoc, (S)‐ 4 : R¹ = CH₃, R² = Fmoc (Boc = tert‐butoxycarbonyl, Fmoc = 9‐fluorenylmethoxycarbonyl)] were synthesized from α‐propargylglycine and α‐propargylalanine, and polymerized with a rhodium catalyst to provide the polymers with number‐average molecular weights of 2400–38,900 in good yields. Polarimetric, circular dichroism (CD), and UV–vis spectroscopic analyses indicated that poly[(S)‐ 1 ], poly[(R)‐ 1 ], and poly[(S)‐ 4 ] formed predominantly one‐handed helical structures both in polar and nonpolar solvents. Poly[(S)‐ 1a ] carrying unprotected carboxy groups was obtained by alkaline hydrolysis of poly[(S)‐ 1 ], and poly[(S)‐ 4b ] carrying unprotected amino groups was obtained by removal of Fmoc groups of poly[(S)‐ 4 ] using piperidine. Poly[(S)‐ 1a ] and poly[(S)‐ 4b ] also exhibited clear CD signals, which were different from those of the precursors, poly[(S)‐ 1 ] and poly[(S)‐ 4 ]. The solution‐state IR measurement revealed the presence of intramolecular hydrogen bonding between the carbamate groups of poly[(S)‐ 1 ] and poly[(S)‐ 1a ]. The plus CD signal of poly[(S)‐ 1a ] turned into minus one on addition of alkali hydroxides and tetrabutylammonium fluoride, accompanying the red‐shift of λ_max. The degree of λ_max shift became large as the size of cation of the additive. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Highly Active,Low‐Valence Molybdenum‐ and Tungsten‐Amide Catalysts for Bifunctional Imine‐Hydrogenation Reactions

The reactions of [M(NO)(CO)₄(ClAlCl₃)] (M=Mo, W) with (iPr₂PCH₂CH₂)₂NH, (PN^HP) at 90 °C afforded [M(NO)(CO)(PN^HP)Cl] complexes (M=Mo, 1a ; W, 1b ). The treatment of compound 1a with KOtBu as a base at room temperature yielded the alkoxide complex [Mo(NO)(CO)(PN^HP)(OtBu)] ( 2a ). In contrast, with the amide base Na[N(SiMe₃)₂], the PN^HP ligand moieties in compounds 1a and 1b could be deprotonated at room temperature, thereby inducing dehydrochlorination into amido complexes [M(NO)(CO)(PNP)] (M=Mo, 3a ; W, 3b ; PNP=(iPr₂PCH₂CH₂)₂N)). Compounds 3a and 3b have pseudo‐trigonal‐bipyramidal geometries, in which the amido nitrogen atom is in the equatorial plane. At room temperature, compounds 3a and 3b were capable of adding dihydrogen, with heterolytic splitting, thereby forming pairs of isomeric amine‐hydride complexes [Mo(NO)(CO)H(PN^HP)] ( 4a(cis) and 4a(trans) ) and [W(NO)(CO)H(PN^HP)] ( 4b(cis) and 4b(trans) ; cis and trans correspond to the position of the H and NO groups). H₂ approaches the Mo/W?N bond in compounds 3a , 3b from either the CO‐ligand side or from the NO‐ligand side. Compounds 4a(cis) and 4a(trans) were only found to be stable under a H₂ atmosphere and could not be isolated. At 140 °C and 60 bar H₂, compounds 3a and 3b catalyzed the hydrogenation of imines, thereby showing maximum turnover frequencies (TOFs) of 2912 and 1120 h^?1, respectively, for the hydrogenation of N‐(4 ‐ methoxybenzylidene)aniline. A Hammett plot for various para‐substituted imines revealed linear correlations with a negative slope of ?3.69 for para substitution on the benzylidene side and a positive slope of 0.68 for para substitution on the aniline side. Kinetics analysis revealed the initial rate of the hydrogenation reactions to be first order in c(cat.) and zeroth order in c(imine). Deuterium kinetic isotope effect (DKIE) experiments furnished a low k_H/k_D value (1.28), which supported a Noyori‐type metal–ligand bifunctional mechanism with H₂ addition as the rate‐limiting step.     

η6‐Arene‐Zirconium‐PNP‐Pincer Complexes: Mechanism of Their Hydrogenolytic Formation and Their Reactivity as Zirconium(II) Synthons

The cyclometalated monobenzyl complexes [(Cbzdiphos^R‐CH)ZrBnX] 1 ^{i Pr} Cl and 1 ^Ph I reacted with dihydrogen (10 bar) to yield the η⁶‐toluene complexes [(Cbzdiphos^R)Zr(η⁶‐tol)X] 2 ^{i Pr} Cl and 2 ^Ph I (cbzdiphos=1,8‐bis(phosphino)‐3,6‐di‐tert‐butyl‐9H‐carbazole). The arene complexes were also found to be directly accessible from the triiodide [(Cbzdiphos^Ph)ZrI₃] through an in situ reaction with a dibenzylmagnesium reagent and subsequent hydrogenolysis, as exemplified for the η⁶‐mesitylene complex [(Cbzdiphos^Ph)Zr(η⁶‐mes)I] ( 3 ^Ph I ). The tolyl‐ring in 2 ^{i Pr} Cl adopts a puckered arrangement (fold angle 23.3°) indicating significant arene‐1,4‐diido character. Deuterium labeling experiments were consistent with an intramolecular reaction sequence after the initial hydrogenolysis of a Zr?C bond by a σ‐bond metathesis. A DFT study of the reaction sequence indicates that hydrogenolysis by σ‐bond metathesis first occurs at the cyclometalated ancillary ligand giving a hydrido‐benzyl intermediate, which subsequently reductively eliminates toluene that then coordinates to the Zr atom as the reduced arene ligand. Complex 2 ^Ph I was reacted with 2,6‐diisopropylphenyl isocyanide giving the deep blue, diamagnetic Zr^II‐diisocyanide complex [(Cbzdiphos^Ph)Zr(CNDipp)₂I] ( 4 ^Ph I ). DFT modeling of 4 ^Ph I demonstrated that the HOMO of the complex is primarily located as a “lone pair on zirconium”, with some degree of back‐bonding into the C≡N π* bond, and the complex is thus most appropriately described as a zirconium(II) species. Reaction of 2 ^Ph I with trimethylsilylazide (N₃TMS) and 2 ^{i Pr} Cl with 1‐azidoadamantane (N₃Ad) resulted in the formation of the imido complexes [(Cbzdiphos^R)Zr=NR′(X)] 5 ^{i Pr} Cl‐NAd and 5 ^Ph I‐NTMS , respectively. Reaction of 2 ^{i Pr} Cl with azobenzene led to N?N bond scission giving 6 ^{i Pr} Cl , in which one of the NPh‐fragments is coupled with the carbazole nitrogen to form a central η²‐bonded hydrazide(?1), whereas the other NPh‐fragment binds to zirconium acting as an imido‐ligand. Finally, addition of pyridine to 2 ^{i Pr} Cl yielded the dark purple complex [(Cbzdiphos^iPr)Zr(bpy)Cl] ( 7 ^{i Pr} Cl ) through a combination of CH‐activation and C?C‐coupling. The structural data and UV/Vis spectroscopic properties of 7 ^{i Pr} Cl indicate that the bpy (bipyridine) may be regarded as a (dianionic) diamido‐type ligand.     

Phosphido‐diphosphine pincer group 3 complexes as efficient initiators for lactide polymerization

New Group 3 metal complexes of the type [LM(CH₂SiMe₃)₂(THF)_n] supported by tridentate phosphido‐diphosphine ligands [(o‐C₆H₄PR₂) ₂ PH; L1‐H : R = iPr; L2‐H : R = Ph] have been synthesized by reaction of L1‐H and L2‐H with [M(CH₂SiMe₃)₃(THF)₂)] (M = Y and Sc). All the new complexes [(o‐C₆H₄PR₂) ₂ PM(CH₂SiMe₃)₂(THF)_n] [M = Y, R = iPr (1), R = Ph (2); M = Sc, R = iPr (3), R = Ph (4)] were studied as initiators for the ring opening polymerization of lactide. The yttrium complexes ( 1 and 2 ) exhibited high activity and good polymerization control, shown by the linear fits in the plot of number‐averaged molecular weight (M_n) versus the percentage conversion and versus the monomer/initiator ratio and by the low polydispersity index values. Interestingly, very good molar‐mass control was observed even when L ‐Lactide was polymerized in the absence of solvent at 130 °C. A good molar‐mass control but lower activities were observed in the polymerization reaction of lactide promoted by the analogous scandium complexes 3 and 4 . © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1374–1382, 2010     

Selenoquinones Stabilized by Ruthenium(II) Arene Complexes: Synthesis,Structure, and Cytotoxicity

A new series of monoselenoquinone and diselenoquinone π complexes, [(η⁶‐p‐cymene)Ru(η⁴‐C₆R₄SeE)] (R=H, E=Se ( 6 ); R=CH₃, E=Se ( 7 ); R=H, E=O ( 8 )), as well as selenolate π complexes [(η⁶‐p‐cymene)Ru(η⁵‐C₆H₃R₂Se)][SbF₆] (R=H ( 9 ); R=CH₃ ( 10 )), stabilized by arene ruthenium moieties were prepared in good yields through nucleophilic substitution reactions from dichlorinated‐arene and hydroxymonochlorinated‐arene ruthenium complexes [(η⁶‐p‐cymene)Ru(C₆R₄XCl)][SbF₆]₂ (R=H, X=Cl ( 1 ); R=CH₃, X=Cl ( 2 ); R=H, X=OH ( 3 )) as well as the monochlorinated π complexes [(η⁶‐p‐cymene)Ru(η⁵‐C₆H₃R₂Cl)][SbF₆]₂ (R=H ( 4 ); R=CH₃ ( 5 )). The X‐ray crystallographic structures of two of the compounds, [(η⁶‐p‐cymene)Ru(η⁴‐C₆Me₄Se₂)] ( 7 ) and [(η⁶‐p‐cymene)Ru(η⁴‐C₆H₄SeO)] ( 8 ), were determined. The structures confirm the identity of the target compounds and ascertain the coordination mode of these unprecedented ruthenium π complexes of selenoquinones. Furthermore, these new compounds display relevant cytotoxic properties towards human ovarian cancer cells.     

Heterobimetallic diethanolaminate complexes of titanium and zirconium with alkaline earth metals

Ti(OPr ⁱ )₄ or Zr(OPr ⁱ )₄ · Pr ⁱ OH react with hydrocarbon-insoluble complexes M{(OCH₂CH₂)NH(CH₂CH₂OH)}₂ (M = Mg, Ca, Sr, Ba) in a 2:1 molar ratio to yield hydrocarbon-soluble heterobimetallic diethanolaminate isopropoxide complexes [M{(OCH₂CH₂)₂NH}₂{M(OPr ⁱ )₃}₂] (M = Mg, Ca, Sr, Ba; M = Ti, Zr), which have been characterized by elemental analyses, molecular weight measurements and spectroscopic [i.r., n.m.r. (¹H and ¹³C)] studies.     

Heterobimetallic Coinage Metal-Ruthenium Complexes Supported by Anionic N-Heterocyclic Carbenes

The lithium complexes [(WCA-NHC)Li(toluene)] of anionic N-heterocyclic carbenes with a weakly coordinating borate moiety (WCA-NHC, WCA=B(C₆F₅)₃, NHC=IDipp=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene) were used for the preparation of silver(I) or copper(I) WCA-NHC complexes. While the reactions in THF with AgCl or CuCl afforded anionic mono- and dicarbene complexes with solvated lithium counterions [Li(THF)_n]⁺ (n=3, 4), the reactions in toluene proceeded with elimination of LiCl and formation of the neutral phosphine and arene complexes [(WCA-NHC)M(PPh₃)] and [(WCA-NHC)M(η²-toluene)] (M=Ag, Cu). The latter were used for the preparation of chlorido- and iodido-bridged heterobimetallic Ag/Ru and Cu/Ru complexes [(WCA-NHC)M(μ-X)₂Ru(PPh₃)(η⁶-p-cymene)] (M=Ag, Cu, X=Cl; M=Ag, X=I). Surprisingly, these complexes resisted the elimination of CuCl, AgCl, or AgI, precluding WCA-NHC transmetalation.