Exploring Bis(cyclometalated) Ruthenium(II) Complexes as Active Catalyst Precursors: Room‐Temperature Alkene–Alkyne Coupling for 1,3‐Diene Synthesis

Described is the development of a new class of bis(cyclometalated) ruthenium(II) catalyst precursors for C? C coupling reactions between alkene and alkyne substrates. The complex [(cod)Ru(3‐methallyl)₂] reacts with benzophenone imine or benzophenone in a 1:2 ratio to form bis(cyclometalated) ruthenium(II) complexes ( 1 ). The imine‐ligated complex 1 a promoted room‐temperature coupling between acrylic esters and amides with internal alkynes to form 1,3‐diene products. A proposed catalytic cycle involves C? C bond formation by oxidative cyclization, β‐hydride elimination, and C? H bond reductive elimination. This Ru^II/Ru^IV pathway is consistent with the observed catalytic reactivity of 1 a for mild tail‐to‐tail methyl acrylate dimerization and for cyclobutene formation by [2+2] norbornene/alkyne cycloaddition.     

Ruthenium(III) tetradentate Schiff-base complexes: spectral,catalytic, and its biocidal efficacy

New six-coordinate ruthenium(III) Schiff-base complexes of general formula [Ru(X)(PPh₃)(L)] (where X = Cl/Br and L = mononucleating bibasic tetradentate ligand derived by condensing actetoacetanilide/acetoacetotoludide with o-aminophenol/o-aminothiophenol/o-aminobenzoic acid in 1 : 2 molar ratio in ethanol) have been synthesized and characterized by physico-chemical and spectroscopic methods. The new ruthenium(III) complexes possess 2NO/2NS metal binding sites and are catalysts for the oxidation of alcohols using molecular oxygen as co-oxidant and in C–C coupling reactions. These complexes possess good biocidal (antibacterial and antifungal) activity.     

Complete assignments of NMR data of salens and their cobalt (III) complexes

Salens, derived from 1,2‐ethylenediamine and salicylaldehydes, have been widely used as ligands for metal complexes which have been showing enormous potential in chemical properties of asymmetric catalysts as well as biological properties such as anticancer agents. Almost all of the salen–metal complexes with their corresponding metal (II)‐complexes show the evidences of chelation of two oxygens in salens. However, several metal (II) complexes, especially cobalt (II) complexes, could not show NMR spectra due to their paramagnetism. Recently, it has been reported that one of the cobalt (III) complexes was used for NMR spectroscopy to evaluate its stereoselectivity as a catalyst. Even though many salen ligands are known, their NMR data are not assigned completely. It was possible that modification in northern part of salen with 2‐hydroxyphenyl group afforded another oxygen chelation site in salen ligand. Here we report that synthesis and full NMR assignment of new salen ligands, which form meso 1,2‐bis(2‐hydroxyphenyl)ethylenediamine) and their cobalt (III) complexes. The assignments of ¹H and ¹³C NMR data obtained in this experiment can help us to predict the NMR data of other salen ligands. Copyright © 2008 John Wiley & Sons, Ltd.     

Protective encapsulation of acid‐sensitive catalysts using polyethylene ligands

The stability of polyethylene oligomer (PE_Olig)‐entrapped salen‐metal complexes toward acidolysis is described. These complexes dissolve in hot toluene and precipitate as hydrophobic powders. The salen species in these precipitates or in precipitates of admixtures of oligomeric complexes and unfunctionalized polyethylene are stable to acid when suspended in acidic methanol for 24 h at 25°C. The lack of metal leaching due to acid‐promoted demetalation was determined using both colorimetric and ICP‐MS analyses. The ICP‐MS results showed the amount of metal loss for PE_Olig‐salen‐metal complexes was 0.27%, 0.45%, and 0.79% for half‐salen Cr(III), salen Cr(III), and salen Mn(III) complexes, respectively. These results were in contrast to the reported behavior of low molecular weight salen metal complexes and to results seen with a salen complex bound to divinylbenzene (DVB) crosslinked polystyrene which demetalates under acidic conditions at room temperature. Salen complexes formed with PE_Olig complexes also demetalate when the PE_Olig‐bound species are in solution at elevated temperature and exposed to acid. These results show that as solids oligomeric polyethylene ligands even without added PE can serve as a protective encapsulating matrix for the solid forms of polymer‐supported catalysts. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and structural characterization of manganese(III,IV) and ruthenium(III) complexes derived from 2-hydroxy-1-naphthaldehydebenzoylhydrazone

Reaction of 2-hydroxy-1-naphthaldehydebenzoylhydrazone(napbhH₂) with manganese(II) acetate tetrahydrate and manganese(III) acetate dihydrate in methanol followed by addition of methanolic KOH in molar ratio (2 : 1 : 10) results in [Mn(IV)(napbh)₂] and [Mn(III)(napbh)(OH)(H₂O)], respectively. Activated ruthenium(III) chloride reacts with napbhH₂ in methanolic medium yielding [Ru(III)(napbhH)Cl(H₂O)]Cl. Replacement of aquo ligand by heterocyclic nitrogen donor in this complex has been observed when the reaction is carried out in presence of pyridine(py), 3-picoline(3-pic) or 4-picoline(4-pic). The molar conductance values in DMF (N,N-dimethyl formamide) of these complexes suggest non-electrolytic and 1 : 1 electrolytic nature for manganese and ruthenium complexes, respectively. Magnetic moment values of manganese complexes suggest Mn(III) and Mn(IV), however, ruthenium complexes are paramagnetic with one unpaired electron suggesting Ru(III). Electronic spectral studies suggest six coordinate metal ions in these complexes. IR spectra reveal that napbhH₂ coordinates in enol-form and keto-form to manganese and ruthenium metal ions in its complexes, respectively. ESR studies of the complexes are also reported.     

Immobilization of ruthenium(II) salen complexes on poly(4-vinylpyridine) and their application in catalytic aldehyde olefination

Two Ru(II)(salen)(PPh₃)₂ complexes grafted on poly(4-vinylpyridine) have been synthesized and characterized. An elemental analysis shows that both grafted samples contain ca. 0.6 wt % Ru. FTIR spectra confirm the formation of metal-salen complexes attached to the carrier polymer by an interaction between the ruthenium(II) compounds with the pyridine nitrogen atoms of the poly(4-vinylpyridine). Immobilization of both Ru(II) salen complexes on the polymer increases their thermal stability as demonstrated by TG-MS analysis. The grafted materials were applied as catalysts for the olefination of various aldehydes at 60 °C under an inert gas atmosphere, showing comparable yields as their homogeneous congeners and high trans-selectivities. The ruthenium(II) compound with a larger salen ligand shows a better recyclability and selectivity than the derivative with the smaller ligand.     

Experimental Evidence for the Involvement of Dinuclear Alkynylcopper(I) Complexes in Alkyne–Azide Chemistry

Dinuclear alkynylcopper(I) ladderane complexes are prepared by a robust and simple protocol involving the reduction of Cu₂(OH)₃OAc or Cu(OAc)₂ by easily oxidised alcohols in the presence of terminal alkynes; they function as efficient catalysts in copper‐catalysed alkyne–azide cycloaddition reactions as predicted by the Ahlquist–Fokin calculations. The same copper(I) catalysts are formed during reactions by using the Sharpless–Fokin protocol. The experimental results also provide evidence that sodium ascorbate functions as a base to deprotonate terminal alkynes and additionally give a convincing alternative explanation for the fact that the Cu^I‐catalysed reactions of certain 1,3‐diazides with phenylacetylene give bis(triazoles) as the major products. The same dinuclear alkynylcopper(I) complexes also function as catalysts in cycloaddition reactions of azides with 1‐iodoalkynes.     

Extraction separation of Am(III) and Eu(III) using divalent quadridentate Schiff bases-bis-salicylaldehyde ethylenediamine

For the selective extraction of Am(III) and Eu(III), quadridentate divalent phenolic Schiff bases-bis-salicylaldehyde ethylenediamine (H₂salen) was investigated as a kind of extractant. The influences of alkaline cation, inorganic anion, ionic strength, pH and the concentration of H₂salen on the distribution ratio of Am(III) and Eu(III) were investigated in detail. As a result, Am(III) and Eu(III) made anionic 1:1 complexes with the ligand (H₂salen) and could be extracted into nitrobenzene as ion-pairs with a suitable monovalent counter anion in the aqueous solution, the extracted species were possibly of the type Am(H₂salen) Eu(salen)Cl and Eu(H₂salen)Cl₃, respectively. The extractability of Eu(III) was significantly stronger than that of Am(III) and the maximum separation factor, SF_(Am/Eu), was 96 at pH 4.0. The results indicated that H₂salen had good selectivity for Am(III) and Eu(III).     

Ruthenium(salen)-catalyzed aerobic oxidative desymmetrization of meso-diols and its kinetics

Chiral (nitrosyl)ruthenium(salen) complexes were found to be efficient catalysts for aerobic oxidative desymmetrization of meso-diols under photoirradiation to give optically active lactols. The scope of the applicability of this reaction ranges widely from acyclic diols to mono-cyclic diols, although fine ligand-tuning of the ruthenium(salen) complexes was required to attain high enantioselectivity (up to 93% ee). In particular, the nature of the apical ligand was found to affect not only enantioselectivity but also kinetics of the desymmetrization reaction. Spectroscopic analysis of the oxidation disclosed that irradiation of visible light is indispensable not only for dissociation of the nitrosyl ligand but also for single electron transfer from the alcohol-bound ruthenium ion to dioxygen.     

{(COD)Ru[RNC(H)-C(H)C(Ph)]2} (RMe, Et): The first structurally characterized mononuclear ruthenium complexes with enyl-imino ligands and their relevance in ruthenium catalyzed C-H activation reactions

The reaction of α,β-unsaturated imines with [(1,5-cyclooctadiene)-bis(2-methylallyl)-ruthenium(II)] leads to the formation of mononuclear ruthenium complexes of the general formula {(COD)Ru[RNC(H)-C(H)C(Ph)]₂}. In these complexes the imine ligands are deprotonated in β-position with respect to the imine double bond and coordinate as an enyl-imino ligand. In the case of R = Me, Et the corresponding compounds have been characterized by X-ray crystallography. The relevance of these complexes with respect to ruthenium catalyzed C-C coupling reactions of the same α,β-unsaturated imines is demonstrated by the structural analysis of another mononuclear ruthenium complex in which two imine ligands are reductively coupled (R = Cy). [(1,5-Cyclooctadiene)-bis(2-methylallyl)-ruthenium(II)] also turns out to be a highly effective precatalyst in the reaction of the respective imines with carbon monoxide and ethylene to produce heterocyclic compounds.     

Theoretical study on photooxidation mechanism of ruthenium complex [Ru(II)‐(bpy)2(TMBiimH2)]2+ with molecular oxygen

Photoinduced reactions of ruthenium complexes with molecular oxygen have attracted a lot of experimental attention; however, the reaction mechanism remains elusive. In this work, we have used the density functional theory method to scrutinize the visible‐light induced photooxidation mechanism of the ruthenium complex [Ru(II)‐(bpy)₂(TMBiimH₂)]²⁺ (bpy: 2, 2‐bipyridine and TMBiimH₂: 4, 5, 4, 5‐tetramethyl‐2, 2‐biimidazole) initiated by the attack of molecular oxygen. The present computational results not only explain very well recent experiments, also provide new mechanistic insights. We found that: (1) the triplet energy transfer process between the triplet molecular oxygen and the metal‐ligand charge transfer triplet state of the ruthenium complex, which leads to singlet molecular oxygen, is thermodynamically favorable; (2) the singlet oxygen addition process to the S₀ ruthenium complex is facile in energy; (3) the chemical transformation from endoperoxide to epidioxetane intermediates can be either two‐ or one‐step reaction (the latter is energetically favored). These findings contribute important mechanistic information to photooxidation reactions of ruthenium complexes with molecular oxygen. © 2016 Wiley Periodicals, Inc.     

Thermal intramolecular electron transfer reactions of [N,N′-ethylene-bis(salicylideneaminato)](2,4-pentanedionato)cobalt(III) complexes in the solid state

The title complexes with the formula Co(salen)L where L is a series of 2,4-pentanedionates underwent thermally induced one-electron transfer reactions from L to Co(III). The reaction left behind a stoichiometric amount of the crystalline Co^II(salen) complex which took up oxygen in a molar ratio of Co:O₂ = 2:1. The kinetic analyses showed that the electron transfer reaction rate was apparently dominated by activation entropy rather than by activation enthalpy.     

General synthesis of (salen)ruthenium(III) complexes via N...N coupling of (salen)ruthenium(VI) nitrides

Reaction of [Ru (VI)(N)(L (1))(MeOH)] (+) (L (1) = N, N'-bis(salicylidene)- o-cyclohexylenediamine dianion) with excess pyridine in CH 3CN produces [Ru (III)(L (1))(py) 2] (+) and N 2. The proposed mechanism involves initial equilibrium formation of [Ru (VI)(N)(L (1))(py)] (+), which undergoes rapid N...N coupling to produce [(py)(L (1))Ru (III) N N-Ru (III)(L (1))(py)] (2+); this is followed by pyridine substituion to give the final product. This ligand-induced N...N coupling of Ru (VI)N is utilized in the preparation of a series of new ruthenium(III) salen complexes, [Ru (III)(L)(X) 2] (+/-) (L = salen ligand; X = H 2O, 1-MeIm, py, Me 2SO, PhNH 2, ( t )BuNH 2, Cl (-) or CN (-)). The structures of [Ru (III)(L (1))(NH 2Ph) 2](PF 6) ( 6), K[Ru (III)(L (1))(CN) 2] ( 9), [Ru (III)(L (2))(NCCH 3) 2][Au (I)(CN) 2] ( 11) (L (2) = N, N'-bis(salicylidene)- o-phenylenediamine dianion) and [N ( n )Bu 4][Ru (III)(L (3))Cl 2] ( 12) (L (3) = N, N'-bis(salicylidene)ethylenediamine dianion) have been determined by X-ray crystallography.     

Transition Metal Complexes of a Salen–Fullerene Diad: Redox and Catalytically Active Nanostructures for Delivery of Metals in Nanotubes

A covalently‐linked salen–C₆₀ (H₂L) assembly binds a range of transition metal cations in close proximity to the fullerene cage to give complexes [M(L)] (M=Mn, Co, Ni, Cu, Zn, Pd), [MCl(L)] (M=Cr, Fe) and [V(O)L]. Attaching salen covalently to the C₆₀ cage only marginally slows down metal binding at the salen functionality compared to metal binding to free salen. Coordination of metal cations to salen–C₆₀ introduces to these fullerene derivatives strong absorption bands across the visible spectrum from 400 to 630 nm, the optical features of which are controlled by the nature of the transition metal. The redox properties of the metal–salen–C₆₀ complexes are determined both by the fullerene and by the nature of the transition metal, enabling the generation of a wide range of fullerene‐containing charged species, some of which possess two or more unpaired electrons. The presence of the fullerene cage enhances the affinity of these complexes for carbon nanostructures, such as single‐, double‐ and multiwalled carbon nanotubes and graphitised carbon nanofibres, without detrimental effects on the catalytic activity of the metal centre, as demonstrated in styrene oxidation catalysed by [Cu(L)]. This approach shows promise for applications of salen–C₆₀ complexes in heterogeneous catalysis.     

Synthesis and characterization of Rhodium(III) dichloro complexes with unsymmetrically bound salen-type ligands

We have synthesized a series of novel octahedral Rh(III) salen-type complexes where the salen ligand is unsymmetrically bound to the Rh(III) dichloride center. This mode of bonding left one intact phenol group coordinating to the rhodium center and has never before been observed in salen-metal chemistry. These remarkably stable complexes possess unique coordination geometry and represent the first time that Rh(III) salen complexes have been successfully isolated from the direct combination of RhCl(3).3H2O and the salen ligand in the absence of a nucleophilic base. The (salen)Rh(III) dichloride complex can be converted to the analogous monochloride complex by reaction with metal carbonate salts.     

Pd(II) and Ni(II) complexes featuring a "phosphasalen" ligand: synthesis and DFT study

A phosphorus analog of salen ligands featuring iminophosphorane functionalities in place of the imine groups was synthesised in 2 steps from o-diphenylphosphinophenol via the preparation of the corresponding bis-aminophosphonium salt. This novel tetradentate ligand (1), which we named phosphasalen, was coordinated to Pd(II) and Ni(II) metal centres affording complexes 6 and 7 respectively, which were characterised by multinuclear NMR, elemental and X-ray diffraction analyses. Both neutral complexes adopt a nearly square-planar geometry around the metal with coordination of all iminophosphorane and phenolate moieties. The electronic properties of these new complexes were investigated by cyclic voltammetry and comparison with known salens was made when possible. Moreover, the particular behaviour of the phosphasalen nickel complex 7 was further investigated through magnetic moment measurements and a DFT study.     

Synthesis and characterization of manganese(IV) and ruthenium(III) complexes derived from bis (2-hydroxy-1-naphthaldehyde)oxaloyldihydrazone

Bis(2-hydroxy-1-naphthaldehyde)oxaloyldihydrazone(naohH₄) interacts with manganese(II) acetate in methanol followed by addition of KOH giving [Mn^IV(naoh)(H₂O)₂]. Activated ruthenium(III) chloride reacts with naohH₄ in methanol yielding [Ru^III(naohH₄)Cl(H₂O)Cl₂]. The replacement of aquo by heterocyclic nitrogen donor in these complexes has been observed when the reaction is carried out in presence of heterocyclic nitrogen donors such as pyridine(py), 3-picoline(3-pic) or 4-picoline(4-pic). The molar conductance values in DMF for these complexes suggest non-electrolytic nature. Magnetic moment values suggest +4 oxidation state for manganese in its complexes, however, ruthenium(III) complexes are paramagnetic with one unpaired electron. Electronic spectral studies suggest six coordinate metal ions. IR spectra reveal that naohH₄ coordinates in enol-form and keto-form to manganese and ruthenium, respectively. ESR and cyclic voltammetric studies of the complexes have also been reported.     

One-electron oxidation of electronically diverse manganese(III) and nickel(II) salen complexes: transition from localized to delocalized mixed-valence ligand radicals

Ligand radicals from salen complexes are unique mixed-valence compounds in which a phenoxyl radical is electronically linked to a remote phenolate via a neighboring redox-active metal ion, providing an opportunity to study electron transfer from a phenolate to a phenoxyl radical mediated by a redox-active metal ion as a bridge. We herein synthesize one-electron-oxidized products from electronically diverse manganese(III) salen complexes in which the locus of oxidation is shown to be ligand-centered, not metal-centered, affording manganese(III)-phenoxyl radical species. The key point in the present study is an unambiguous assignment of intervalence charge transfer bands by using nonsymmetrical salen complexes, which enables us to obtain otherwise inaccessible insight into the mixed-valence property. A d(4) high-spin manganese(III) ion forms a Robin-Day class II mixed-valence system, in which electron transfer is occurring between the localized phenoxyl radical and the phenolate. This is in clear contrast to a d(8) low-spin nickel(II) ion with the same salen ligand, which induces a delocalized radical (Robin-Day class III) over the two phenolate rings, as previously reported by others. The present findings point to a fascinating possibility that electron transfer could be drastically modulated by exchanging the metal ion that bridges the two redox centers.     

Gold(I)‐ and Yb(OTf)3‐Cocatalyzed Rearrangements of Epoxy Alkynes: Transfer of a Carbonyl Group in a Five‐Membered Carbocycle

We report here the intramolecular reactions between α,β‐epoxy ketones and alkynes cocatalyzed by gold(I) and Yb(OTf)₃. This new catalytic system based on a combination of gold(I) and Yb(OTf)₃ allows facile transformation of epoxy alkynes to give novel indene derivatives in moderate to good yields under mild conditions. Moreover, we describe here the first observation of a transfer of a carbonyl group in a five‐membered carbocycle during gold‐catalyzed reactions. This proposed mechanism is corroborated by isotope‐labeling experiments (D and ¹³C). Furthermore, the probable role of each catalyst in this interesting domino reaction has been examined by ³¹P NMR experiments. The utilization of gold catalysts combined with rare‐earth metal salts offers a new concept for the design of catalyst combinations for domino or cascade reactions.     

Electron transfer reactions of nickel(III) and nickel(IV) complexes

This review narrates the electron transfer reactions of various nickel(III) and nickel(IV) complexes reported during the period 1981 until today. The reactions have been categorized mainly with respect to the type of nickel complexes. The reactivity of nickel(III) complexes of macrocycles, 2,2′-bipyridyl and 1,10-phenanthroline, peptides and oxime–imine, and of nickel(IV) complexes derived from oxime–imine, oxime and miscellaneous ligands with various organic and inorganic electron donors have been included. Kinetic and mechanistic features associated with such interactions have been duly analyzed. The relevance of Marcus cross-relation equations in the delineation of the electron transfer paths has also been critically discussed.