Photophysical Properties of Au‐CdTe Hybrid Nanostructures of Varying Sizes and Shapes

We design well‐defined metal‐semiconductor nanostructures using thiol‐functionalized CdTe quantum dots (QDs)/quantum rods (QRs) with bovine serum albumin (BSA) protein‐conjugated Au nanoparticles (NPs)/nanorods (NRs) in aqueous solution. The main focus of this article is to address the impacts of size and shape on the photophysical properties, including radiative and nonradiative decay processes and energy transfers, of Au‐CdTe hybrid nanostructures. The red shifting of the plasmonic band and the strong photoluminescence (PL) quenching reveal a strong interaction between plasmons and excitons in these Au‐CdTe hybrid nanostructures. The PL quenching of CdTe QDs varies from 40 to 86 % by changing the size and shape of the Au NPs. The radiative as well as the nonradiative decay rates of the CdTe QDs/QRs are found to be affected in the presence of both Au NPs and NRs. A significant change in the nonradiative decay rate from 4.72×10⁶ to 3.92×10¹⁰ s^?1 is obtained for Au NR‐conjugated CdTe QDs. It is seen that the sizes and shapes of the Au NPs have a pronounced effect on the distance‐dependent energy transfer. Such metal‐semiconductor hybrid nanostructures should have great potentials for nonlinear optical properties, photovoltaic devices, and chemical sensors.     

Prolonged Hot Electron Dynamics in Plasmonic‐Metal/Semiconductor Heterostructures with Implications for Solar Photocatalysis

Ideal solar‐to‐fuel photocatalysts must effectively harvest sunlight to generate significant quantities of long‐lived charge carriers necessary for chemical reactions. Here we demonstrate the merits of augmenting traditional photoelectrochemical cells with plasmonic nanoparticles to satisfy these daunting photocatalytic requirements. Electrochemical techniques were employed to elucidate the mechanics of plasmon‐mediated electron transfer within Au/TiO₂ heterostructures under visible‐light (λ>515 nm) irradiation in solution. Significantly, we discovered that these transferred electrons displayed excited‐state lifetimes two orders of magnitude longer than those of electrons photogenerated directly within TiO₂ via UV excitation. These long‐lived electrons further enable visible‐light‐driven H₂ evolution from water, heralding a new photocatalytic paradigm for solar energy conversion.     

Plasmonic Nanorattles as Next‐Generation Catalysts for Surface Plasmon Resonance‐Mediated Oxidations Promoted by Activated Oxygen

Nanorattles, comprised of a nanosphere inside a nanoshell, were employed as the next generation of plasmonic catalysts for oxidations promoted by activated O₂. After investigating how the presence of a nanosphere inside a nanoshell affected the electric‐field enhancements in the nanorattle relative to a nanoshell and a nanosphere, the SPR‐mediated oxidation of p‐aminothiophenol (PATP) functionalized at their surface was investigated to benchmark how these different electric‐field intensities affected the performances of Au@AgAu nanorattles, AgAu nanoshells and Au nanoparticles having similar sizes. The high performance of the nanorattles enabled the visible‐light driven synthesis of azobenzene from aniline under ambient conditions. As the nanorattles allow the formation of electromagnetic hot spots without relying on the uncontrolled aggregation of nanostructures, it enables their application as catalysts in liquid phase under mild conditions using visible light as the main energy input.     

In Situ Observation of Hot Carrier Transfer at Plasmonic Au/Metal-Organic Frameworks (MOFs) Interfaces

Constructing heterostructures have been demonstrated as an ideal strategy for boosting charge separation on plasmonic photocatalysts, but the detailed interface charge transfer mechanism remains elusive. Herein, that authors fabricate plasmonic Au and metal-organic frameworks (MOFs, NH₂−MIL-125 and MIL-125 used in this work) heterostructures and explore the interface charge transfer mechanism by in situ electron paramagnetic resonance (EPR) spectroscopy and electrochemical measurements. The plasmon-excited hot electrons on Au can transfer across the Au/MOF interface and be captured by the coordinatively unsaturated sites of secondary building units (Ti₈O₈(OH)₄ cluster) of the MOF structure, and the plasmon-excited hot holes on Au tend to transfer to and be trapped at the functionalized organic ligand (1,4-benzenedicarboxylate−NH₂). The spatially separated hot electrons and holes exhibit boosted the photocatalytic activity for chromium (VI) reduction and selective benzyl alcohol oxidation. This work illustrates the advantage of the versatile functionalization of MOF structures enabling molecular-level manipulation of interface charge transfer on plasmonic photocatalysts.     

Probing the Catalytic Activity of Reduced Graphene Oxide Decorated with Au Nanoparticles Triggered by Visible Light

Hybrid materials in which reduced graphene oxide (rGO) is decorated with Au nanoparticles (rGO–Au NPs) were obtained by the in situ reduction of GO and AuCl₄^?_(aq) by ascorbic acid. On laser excitation, rGO could be oxidized as a result of the surface plasmon resonance (SPR) excitation in the Au NPs, which generates activated O₂ through the transfer of SPR‐excited hot electrons to O₂ molecules adsorbed from air. The SPR‐mediated catalytic oxidation of p‐aminothiophenol (PATP) to p,p′‐dimercaptoazobenzene (DMAB) was then employed as a model reaction to probe the effect of rGO as a support for Au NPs on their SPR‐mediated catalytic activities. The increased conversion of PATP to DMAB relative to individual Au NPs indicated that charge‐transfer processes from rGO to Au took place and contributed to improved SPR‐mediated activity. Since the transfer of electrons from Au to adsorbed O₂ molecules is the crucial step for PATP oxidation, in addition to the SPR‐excited hot electrons of Au NPs, the transfer of electrons from rGO to Au contributed to increasing the electron density of Au above the Fermi level and thus the Au‐to‐O₂ charge‐transfer process.     

Peapod‐Type Nanocomposites through the In Situ Growth of Gold Nanoparticles within Preformed Hexaniobate Nanoscrolls

A facile in situ method to grow Au nanoparticles (NPs) in hexaniobate nanoscrolls is applied to the formation of plasmonic Au@hexaniobate and bifunctional plasmonic‐magnetic Au‐Fe₃O₄@hexaniobate nanopeapods (NPPs). Utilizing a solvothermal treatment, rigid multiwalled hexaniobate nanoscrolls and partially filled Fe₃O₄@hexaniobate NPPs were first fabricated. These nanostructures were then used as templates for the controlled in situ growth of Au NPs. The resulting peapod structures exhibited high filling fractions and long‐range uniformity. Optical measurements showed a progressive red shift in plasmonic behavior between Au NPs, Au NPPs, and Au‐Fe₃O₄ NPPs; magnetic studies found that the addition of gold in the Fe₃O₄@hexaniobate NPPs reduced interparticle coupling effects. The development of this approach allows for the routine bulk preparation of noble‐metal‐containing bifunctional nanopeapod materials.     

Surface Modifications and Optoelectronic Characterization of TiO2‐Nanoparticles: Design of New Photo‐Electronic Materials

TiO₂ nanoparticles are of great current interest for applications in photo‐electronic materials including light‐energy conversion, artificial photosynthetic systems as well as photocatalysis. The success of these applications relies on the exciton recombination dynamics and visible‐light sensitivity of the TiO₂ nanomaterials. Thus, in order to develop the highly efficient photo‐electronic materials absorbing visible light, different low dimensional TiO₂ nanostructures such as nanodiscs, nanofibers and nanochains were synthesized, and thereafter their surfaces were modified by incorporating with Sn‐porphyrins and heteropoly acid. The optoelectronic properties of the surface‐modified nanomaterials were investigated with regard to the optical properties and the surface exciton dynamics by using both steady‐state and ultrafast time‐resolved laser spectroscopic techniques including single nanoparticle photoluminescence technique. These results were correlated with the photo‐electronic properties including photocatalytic activities and solar cell efficiencies, indicating that the electron transfer mechanism in the modified nanostructures may be similar to the “Z‐scheme” of the plant photosynthetic system so that both photocatalytic activity and solar cell efficiencies were synergistically enhanced by using two color illumination.     

Novel Au/La‐SrTiO3 microspheres: Superimposed Effect of Gold Nanoparticles and Lanthanum Doping in Photocatalysis

Novel multielement Au/La‐SrTiO₃ microspheres were synthesized by a solvothermal method using monodisperse gold and La‐SrTiO₃ nanocrystals as building blocks. The porous Au/La‐SrTiO₃ microspheres had a large surface area of 94.6 m² g^?1. The stable confined Au nanoparticles demonstrated strong surface plasmon resonance effect, leading to enhanced absorption in a broad UV/Vis/NIR range. Doping of rare‐earth metal La also broadened the absorption band to the visible region. Both the conduction and valence bands of Au/La‐SrTiO₃ microspheres thus show favorable potential for proton reduction under visible light. The superimposed effect of Au nanoparticles and La doping in Au/La‐SrTiO₃ microspheres led to high photocurrent density in photoelectrochemical water splitting and good photocatalytic activity in photodegradation of rhodamine B. The photocatalytic activities are in the order of the following: Au/La‐SrTiO₃ microspheres>Au/SrTiO₃ microspheres>La‐SrTiO₃ microspheres>SrTiO₃ microspheres.     

Integration of Semiconducting Sulfides for Full‐Spectrum Solar Energy Absorption and Efficient Charge Separation

The full harvest of solar energy by semiconductors requires a material that simultaneously absorbs across the whole solar spectrum and collects photogenerated electrons and holes separately. The stepwise integration of three semiconducting sulfides, namely ZnS, CdS, and Cu_2?xS, into a single nanocrystal, led to a unique ternary multi‐node sheath ZnS–CdS–Cu_2?xS heteronanorod for full‐spectrum solar energy absorption. Localized surface plasmon resonance (LSPR) in the nonstoichiometric copper sulfide nanostructures enables effective NIR absorption. More significantly, the construction of pn heterojunctions between Cu_2?xS and CdS leads to staggered gaps, as confirmed by first‐principles simulations. This band alignment causes effective electron–hole separation in the ternary system and hence enables efficient solar energy conversion.     

Gold/monolayer graphitic carbon nitride plasmonic photocatalyst for ultrafast electron transfer in solar-to-hydrogen energy conversion

Gold (Au) plasmonic nanoparticles were grown evenly on monolayer graphitic carbon nitride (g-C₃N₄) nanosheets via a facile oil-bath method. The photocatalytic activity of the Au/monolayer g-C₃N₄ composites under visible light was evaluated by photocatalytic hydrogen evolution and environmental treatment. All of the Au/monolayer g-C₃N₄ composites showed better photocatalytic performance than that of monolayer g-C₃N₄ and the 1% Au/monolayer g-C₃N₄ composite displayed the highest photocatalytic hydrogen evolution rate of the samples. The remarkable photocatalytic activity was attributed largely to the successful introduction of Au plasmonic nanoparticles, which led to the surface plasmon resonance (SPR) effect. The SPR effect enhanced the efficiency of light harvesting and induced an efficient hot electron transfer process. The hot electrons were injected from the Au plasmonic nanoparticles into the conduction band of monolayer g-C₃N₄. Thus, the Au/monolayer g-C₃N₄ composites possessed higher migration and separation efficiencies and lower recombination probability of photogenerated electron-hole pairs than those of monolayer g-C₃N₄. A photocatalytic mechanism for the composites was also proposed.     

Nanoplasmonic zirconium nitride photocatalyst for direct overall water splitting

The ability of plasmonic nanostructures to efficiently harvest light energy and generate energetic hot carriers makes them promising materials for utilization in photocatalytic water spitting.Apart from the traditional Au and Ag based plasmonic photocatalysts,more recently the noble-metal-free alternative plasmonic materials have attracted ever-increasing interest.Here we report the first use of plasmonic zirconium nitride（ZrN） nanoparticles as a promising photocatalyst for water splitting.Highl...     

Plasmon‐Assisted Water Splitting Using Two Sides of the Same SrTiO3 Single‐Crystal Substrate: Conversion of Visible Light to Chemical Energy

A plasmon‐induced water splitting system that operates under irradiation by visible light was successfully developed; the system is based on the use of both sides of the same strontium titanate (SrTiO₃) single‐crystal substrate. The water splitting system contains two solution chambers to separate hydrogen (H₂) and oxygen (O₂). To promote water splitting, a chemical bias was applied by regulating the pH values of the chambers. The quantity of H₂ evolved from the surface of platinum, which was used as a reduction co‐catalyst, was twice the quantity of O₂ evolved from an Au‐nanostructured surface. Thus, the stoichiometric evolution of H₂ and O₂ was clearly demonstrated. The hydrogen‐evolution action spectrum closely corresponds to the plasmon resonance spectrum, indicating that the plasmon‐induced charge separation at the Au/SrTiO₃ interface promotes water oxidation and the subsequent reduction of a proton on the backside of the SrTiO₃ substrate. The chemical bias is significantly reduced by plasmonic effects, which indicates the possibility of constructing an artificial photosynthesis system with low energy consumption.     

全固态Z-型CdS/Au/Bi2MoO6异质结的构筑及其光催化性能

采用简单的化学还原沉积和二次水热的方法成功制备了CdS和Au共同修饰Z型CdS/Au/Bi2MoO6(CdS/Au/BMO)光催化剂。通过X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)等测试技术对其组成、形貌、光吸收特性和光电化学性能等进行系统表征。实验结果表明,CdS/Au/BMO-2复合材料在可见光照射下表现出最佳的降解效率,其降解RhB的速率常数约为BMO的8.8倍和CdS的20倍。Au NPs作为固态电子媒介,为光生电子的传输和转移提供了一个通道,同时Au NPs的表面等离子体共振(SPR)效应和CdS纳米粒子显著拓宽了催化体系对可见光的响应范围;通过对催化剂的组成、结构和光电性能表征,确定了CdS/Au/BMO的能带结构,进而探讨了CdS/Au/BMO活性增强机制。     

Structure‐Dependent Photoinduced Electron Transfer in Fullerodendrimers with Light‐Harvesting Oligophenylenevinylene Terminals

Oligophenylenevinylene (OPV)‐terminated phenylenevinylene dendrons G1 – G4 with one, two, four, and eight “side‐arms”, respectively, were prepared and attached to C₆₀ by a 1,3‐dipolar cycloaddition of azomethine ylides generated in situ from dendritic aldehydes and N‐methylglycine. The relative electronic absorption of the OPV moiety increases progressively along the fullerodendrimer family C₆₀G1 – C₆₀G4 , reaching a 99:1 ratio for C₆₀G4 (antenna effect). UV/Vis and near‐IR luminescence and transient absorption spectroscopy was used to elucidate photoinduced energy and electron transfer in C₆₀G1 – C₆₀G4 as a function of OPV moiety size and solvent polarity (toluene, dichloromethane, benzonitrile), taking into account the fact that the free‐energy change for electron transfer is the same along the series owing to the invariability of the donor–acceptor couple. Regardless of solvent, all the fullerodendrimers exhibit ultrafast OPV→C₆₀ singlet energy transfer. In CH₂Cl₂, the OPV→C₆₀ electron transfer from the lowest fullerene singlet level (¹C₆₀*) is slightly exergonic (ΔG_CS≈0.07 eV), but is observed, to an increasing extent, only in the largest systems C₆₀G2 – C₆₀G4 with lower activation barriers for electron transfer. This effect has been related to a decrease of the reorganization energy upon enlargement of the molecular architecture. Structural factors are also at the origin of an unprecedented OPV→C₆₀ electron transfer observed for C₆₀G3 and C₆₀G4 in apolar toluene, whereas in benzonitrile, electron transfer occurs in all cases. Monitoring of the lowest fullerene triplet state by sensitized singlet oxygen luminescence and transient absorption spectroscopy shows that this level is populated through intersystem crossing and is not involved in photoinduced electron transfer.     

Plasmonic Nickel–TiO2 Heterostructures for Visible‐Light‐Driven Photochemical Reactions

Plasmon‐mediated carrier transfer (PMCT) at metal–semiconductor heterojunctions has been extensively exploited to drive photochemical reactions, offering intriguing opportunities for solar photocatalysis. However, to date, most studies have been conducted using noble metals. Inexpensive materials capable of generating and transferring hot carriers for photocatalysis via PMCT have been rarely explored. Here, we demonstrate that the plasmon excitation of nickel induces the transfer of both hot electrons and holes from Ni to TiO₂ in a rationally designed Ni–TiO₂ heterostructure. Furthermore, it is discovered that the transferred hot electrons either occupy oxygen vacancies (V_O) or produce Ti³⁺ on TiO₂, while the transferred hot holes are located on surface oxygens at TiO₂. Moreover, the transferred hot electrons are identified to play a primary role in driving the degradation of methylene blue (MB). Taken together, our results validate Ni as a promising low‐cost plasmonic material for prompting visible‐light photochemical reactions.     

Photocatalytic Reduction of Carbon Dioxide by Hydrous Hydrazine over Au–Cu Alloy Nanoparticles Supported on SrTiO3/TiO2 Coaxial Nanotube Arrays

Efficient photocatalytic conversion of CO₂ into CO and hydrocarbons by hydrous hydrazine (N₂H₄?H₂O) is achieved on SrTiO₃/TiO₂ coaxial nanotube arrays loaded with Au–Cu bimetallic alloy nanoparticles. The synergetic catalytic effect by the Au–Cu alloy nanoparticles and the fast electron‐transfer in SrTiO₃/TiO₂ coaxial nanoarchitecture are the main reasons for the efficiency, while N₂H₄?H₂O as the H source and electron donor provides a reducing atmosphere to protect the surface Cu atoms from oxidation, therefore maintaining the alloying effect which is the basis for the high photocatalytic activity and stability. This approach opens a feasible route to enhance the photocatalytic efficiency, which also benefits the development of photocatalysts and co‐catalysts.     

Boosting Electrocatalytic Hydrogen Evolution over Metal–Organic Frameworks by Plasmon‐Induced Hot‐Electron Injection

Efficient hydrogen evolution via electrocatalytic water splitting holds great promise in modern energy devices. Herein, we demonstrate that the localized surface plasmon resonance (LSPR) excitation of Au nanorods (NRs) dramatically improves the electrocatalytic hydrogen evolution activity of CoFe‐metal–organic framework nanosheets (CoFe‐MOFNs), leading to a more than 4‐fold increase of current density at ?0.236 V (vs. RHE) for Au/CoFe‐MOFNs composite under light irradiation versus in dark. Mechanistic investigations reveal that the hydrogen evolution enhancement can be largely attributed to the injection of hot electrons from AuNRs to CoFe‐MOFNs, raising the Fermi level of CoFe‐MOFNs, facilitating the reduction of H₂O and affording decreased activation energy for HER. This study highlights the superiority of plasmonic excitation on improving electrocatalytic efficiency of MOFs and provides a novel avenue towards the design of highly efficient water‐splitting systems under light irradiation.     

Particle‐in‐a‐Frame Nanostructures with Interior Nanogaps

Designing plasmonic hollow colloids with small interior nanogaps would allow structural properties to be exploited that are normally linked to an ensemble of particles but within a single nanoparticle. Now, a synthetic approach for constructing a new class of frame nanostructures is presented. Fine control over the galvanic replacement reaction of Ag nanoprisms with Au precursors gave unprecedented Au particle‐in‐a‐frame nanostructures with well‐defined sub‐2 nm interior nanogaps. The prepared nanostructures exhibited superior performance in applications, such as plasmonic sensing and surface‐enhanced Raman scattering, over their solid nanostructure and nanoframe counterparts. This highlights the benefit of their interior hot spots, which can highly promote and maximize the electric field confinement within a single nanostructure.     

Room‐Temperature and Aqueous‐Phase Synthesis of Plasmonic Molybdenum Oxide Nanoparticles for Visible‐Light‐Enhanced Hydrogen Generation

A straightforward aqueous synthesis of MoO_3?x nanoparticles at room temperature was developed by using (NH₄)₆Mo₇O₂₄?4 H₂O and MoCl₅ as precursors in the absence of reductants, inert gas, and organic solvents. SEM and TEM images indicate the as‐prepared products are nanoparticles with diameters of 90–180 nm. The diffuse reflectance UV‐visible‐near‐IR spectra of the samples indicate localized surface plasmon resonance (LSPR) properties generated by the introduction of oxygen vacancies. Owing to its strong plasmonic absorption in the visible‐light and near‐infrared region, such nanostructures exhibit an enhancement of activity toward visible‐light catalytic hydrogen generation. MoO_3?x nanoparticles synthesized with a molar ratio of Mo^VI/Mo^V 1:1 show the highest yield of H₂ evolution. The cycling catalytic performance has been investigated to indicate the structural and chemical stability of the as‐prepared plasmonic MoO_3?x nanoparticles, which reveals its potential application in visible‐light catalytic hydrogen production.     

Ultrafast Relaxation Processes of Conjugated Polymer Nanoparticles in the Presence of Au Nanoparticles

Considering the importance of conjugated polymer nanoparticles, major emphasis has been given for designing and understanding the energy transfer and charge transfer processes of organic‐inorganic hybrids for light harvesting applications. In the present study, we have designed an aqueous solution‐based light harvesting system using conjugated polymer nanoparticles (poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene], MEH‐PPV) and Au nanoparticles. The change in photo‐induced processes in the presence of metal nanoparticles are studied by steady‐state absorption, time‐resolved emission, time‐resolved fluorescence up‐conversion, ultrafast anisotropy and femtosecond transient absorption spectroscopy. Global and target analysis of transient absorption data validate the creation of a collective delocalized state in polymer nanoparticles, and the time scale for excitation energy funnelling from S₁ state to low lying collective delocalized state (CL_s) is 18 ps. Then, the electron transfer from the CL_s state to Au NP occurs with a time constant of 150 ps. The 815 ps long lived charge transfer (CT) state signifies the charge transfer from the CL_s state of polymer nanoparticles to Au NP. Such basic understanding of relaxation processes in hybrid systems is very important for designing inorganic‐organic hybrid light‐harvesting systems.