Plasmon‐Induced Ammonia Synthesis through Nitrogen Photofixation with Visible Light Irradiation

We have successfully developed a plasmon‐induced technique for ammonia synthesis that responds to visible light through a strontium titanate (SrTiO₃) photoelectrode loaded with gold (Au) nanoparticles. The photoelectrochemical reaction cell was divided into two chambers to separate the oxidized (anodic side) and reduced (cathodic side) products. To promote NH₃ formation, a chemical bias was applied by regulating the pH value of these compartments, and ethanol was added to the anodic chamber as a sacrificial donor. The quantity of NH₃ formed at the ruthenium surface, which was used as a co‐catalyst for SrTiO₃, increases linearly as a function of time under irradiation with visible light at wavelengths longer than 550 nm. The NH₃ formation action spectrum approximately corresponds to the plasmon resonance spectrum. We deduced that plasmon‐induced charge separation at the Au/SrTiO₃ interface promotes oxidation at the anodic chamber and subsequent nitrogen reduction on the cathodic side.     

Novel Au/La‐SrTiO3 microspheres: Superimposed Effect of Gold Nanoparticles and Lanthanum Doping in Photocatalysis

Novel multielement Au/La‐SrTiO₃ microspheres were synthesized by a solvothermal method using monodisperse gold and La‐SrTiO₃ nanocrystals as building blocks. The porous Au/La‐SrTiO₃ microspheres had a large surface area of 94.6 m² g^?1. The stable confined Au nanoparticles demonstrated strong surface plasmon resonance effect, leading to enhanced absorption in a broad UV/Vis/NIR range. Doping of rare‐earth metal La also broadened the absorption band to the visible region. Both the conduction and valence bands of Au/La‐SrTiO₃ microspheres thus show favorable potential for proton reduction under visible light. The superimposed effect of Au nanoparticles and La doping in Au/La‐SrTiO₃ microspheres led to high photocurrent density in photoelectrochemical water splitting and good photocatalytic activity in photodegradation of rhodamine B. The photocatalytic activities are in the order of the following: Au/La‐SrTiO₃ microspheres>Au/SrTiO₃ microspheres>La‐SrTiO₃ microspheres>SrTiO₃ microspheres.     

Boosting Electrocatalytic Hydrogen Evolution over Metal–Organic Frameworks by Plasmon‐Induced Hot‐Electron Injection

Efficient hydrogen evolution via electrocatalytic water splitting holds great promise in modern energy devices. Herein, we demonstrate that the localized surface plasmon resonance (LSPR) excitation of Au nanorods (NRs) dramatically improves the electrocatalytic hydrogen evolution activity of CoFe‐metal–organic framework nanosheets (CoFe‐MOFNs), leading to a more than 4‐fold increase of current density at ?0.236 V (vs. RHE) for Au/CoFe‐MOFNs composite under light irradiation versus in dark. Mechanistic investigations reveal that the hydrogen evolution enhancement can be largely attributed to the injection of hot electrons from AuNRs to CoFe‐MOFNs, raising the Fermi level of CoFe‐MOFNs, facilitating the reduction of H₂O and affording decreased activation energy for HER. This study highlights the superiority of plasmonic excitation on improving electrocatalytic efficiency of MOFs and provides a novel avenue towards the design of highly efficient water‐splitting systems under light irradiation.     

A Redox‐Mediator‐Free Solar‐Driven Z‐Scheme Water‐Splitting System Consisting of Modified Ta3N5 as an Oxygen‐Evolution Photocatalyst

Tantalum nitride (Ta₃N₅) modified with various O₂‐evolution cocatalysts was employed as a photocatalyst for water oxidation under visible light (λ>420 nm) in an attempt to construct a redox‐mediator‐free Z‐scheme water‐splitting system. Ta₃N₅ was prepared by nitriding Ta₂O₅ powder under a flow of NH₃ at 1023–1223 K. The activity of Ta₃N₅ for water oxidation from an aqueous AgNO₃ solution as an electron acceptor without cocatalyst was dependent on the generation of a well‐crystallized Ta₃N₅ phase with a low density of anionic defects. Modification of Ta₃N₅ with nanoparticulate metal oxides as cocatalysts for O₂ evolution improved water‐oxidation activity. Of the cocatalysts examined, cobalt oxide (CoO_x) was found to be the most effective, improving the water‐oxidation efficiency of Ta₃N₅ by six to seven times. Further modification of CoO_x/Ta₃N₅ with metallic Ir as an electron sink allowed one to achieve Z‐scheme water splitting under simulated sunlight through interparticle electron transfer without the need for a shuttle redox mediator in combination with Ru‐loaded SrTiO₃ doped with Rh as a H₂‐evolution photocatalyst.     

Water Splitting via Decoupled Photocatalytic Water Oxidation and Electrochemical Proton Reduction Mediated by Electron‐Coupled‐Proton Buffer

Water splitting mediated by electron‐coupled‐proton buffer (ECPB) provides an efficient way to avoid gas mixing by separating oxygen evolution from hydrogen evolution in space and time. Though electrochemical and photoelectrochemcial water oxidation have been incorporated in such a two‐step water splitting system, alternative ways to reduce the cost and energy input for decoupling two half‐reactions are desired. Herein, we show the feasibility of photocatalytic oxygen evolution in a powder system with BiVO₄ as a photocatalyst and polyoxometalate H₃PMo₁₂O₄₀ as an electron and proton acceptor. The resulting reaction mixture was allowed to be directly used for the subsequent hydrogen evolution with the reduced H₃PMo₁₂O₄₀ as electron and proton donors. Our system exhibits excellent stability in repeated oxygen and hydrogen evolution, which brings considerable convenience to decoupled water splitting.     

Hot‐Electron‐Transfer Enhancement for the Efficient Energy Conversion of Visible Light

Great strides have been made in enhancing solar energy conversion by utilizing plasmonic nanostructures in semiconductors. However, current generation with plasmonic nanostructures is still somewhat inefficient owing to the ultrafast decay of plasmon‐induced hot electrons. It is now shown that the ultrafast decay of hot electrons across Au nanoparticles can be significantly reduced by strong coupling with CdS quantum dots and by a Schottky junction with perovskite SrTiO₃ nanoparticles. The designed plasmonic nanostructure with three distinct components enables a hot‐electron‐assisted energy cascade for electron transfer, CdS→Au→SrTiO₃, as demonstrated by steady‐state and time‐resolved photoluminescence spectroscopy. Consequently, hot‐electron transfer enabled the efficient production of H₂ from water as well as significant electron harvesting under irradiation with visible light of various wavelengths. These findings provide a new approach for overcoming the low efficiency that is typically associated with plasmonic nanostructures.     

Electron‐Transfer Mediator Microbiosensor Fabrication Based on Immobilizing HRP‐Labeled Au Colloids on Gold Electrode Surface by 11‐Mercaptoundecanoic Acid Monolayer

In this paper, a new strategy for constructing a mediator‐type amperometric hydrogen peroxide (H₂O₂) microbiosensor was described. An electropolymerized thionine film (PTH) was deposited directly onto a gold electrode surface. The resulting redox film was extremely thin, adhered well onto a substrate (electrode), and had a highly cross‐linked network structure. Consequently, horseradish peroxidase (HRP) was successfully immobilized on nanometer‐sized Au colloids, which were supported by thiol‐tailed groups of 11‐mercaptoundecanoic acid (11‐MUA) monolayer covalently bound onto PTH film. With the aid of the PTH mediator, HRP‐labeled Au colloids microbiosensor displayed excellent electrocatalytical response to the reduction of H₂O₂. This matrix showed a biocompatible microenvironment for retaining the native activity of the covalent HRP and a very low mass transport barrier to the substrate, which provided a fast amperometric response to H₂O₂. The proposed H₂O₂ microbiosensor exhibited linear range of 3.5 μM–0.7 mM with a detection limit of 0.05 μM (S/N=3). The response showed a Michaelis‐Menten behavior at larger H₂O₂ concentrations. The K_M^app value for the biosensors based on 24 nm Au colloids was found to be 47 μM, which demonstrated that HRP immobilized on Au colloids exhibited a high affinity to H₂O₂ with no loss of enzymatic activity. This microbiosensor possessed good analytical performance and storage stability.     

Strong‐Base‐Assisted Synthesis of a Crystalline Covalent Triazine Framework with High Hydrophilicity via Benzylamine Monomer for Photocatalytic Water Splitting

Methods to synthesize crystalline covalent triazine frameworks (CTFs) are limited and little attention has been paid to development of hydrophilic CTFs and photocatalytic overall water splitting. A route to synthesize crystalline and hydrophilic CTF‐HUST‐A1 with a benzylamine‐functionalized monomer is presented. The base reagent used plays an important role in the enhancement of crystallinity and hydrophilicity. CTF‐HUST‐A1 exhibits good crystallinity, excellent hydrophilicity, and excellent photocatalytic activity in sacrificial photocatalytic hydrogen evolution (hydrogen evolution rate up to 9200 μmol g^?1 h^?1). Photocatalytic overall water splitting is achieved by depositing dual co‐catalysts in CTF‐HUST‐A1, with H₂ evolution and O₂ evolution rates of 25.4 μmol g^?1 h^?1 and 12.9 μmol g^?1 h^?1 in pure water without using sacrificial agent.     

A Hydrogen‐Deficient Nickel–Cobalt Double Hydroxide for Photocatalytic Overall Water Splitting

Developing highly efficient and low‐cost photocatalysts for overall water splitting has long been a pursuit for converting solar power into clean hydrogen energy. Herein, we demonstrate that a nonstoichiometric nickel–cobalt double hydroxide can achieve overall water splitting by itself upon solar light irradiation, avoiding the consumption of noble‐metal co‐catalysts. We employed an intensive laser to ablate a NiCo alloy target immersed in alkaline solution, and produced so‐called L‐NiCo nanosheets with a nonstoichiometric composition and O^2?/Co³⁺ ions exposed on the surface. The nonstoichiometric composition broadens the band gap, while O^2? and Co³⁺ ions boost hydrogen and oxygen evolution, respectively. As such, the photocatalyst achieves a H₂ evolution rate of 1.7 μmol h^?1 under AM 1.5G sunlight irradiation and an apparent quantum yield (AQE) of 1.38 % at 380 nm.     

Van der Waals Heterostructures Comprised of Ultrathin Polymer Nanosheets for Efficient Z‐Scheme Overall Water Splitting

Inspired by natural photosynthesis, Z‐scheme photocatalytic systems are very appealing for achieving efficient overall water splitting. Developing metal‐free Z‐scheme photocatalysts for overall water splitting, however, still remains challenging. The construction of polymer‐based van der Waals heterostructures as metal‐free Z‐scheme photocatalytic systems for overall water splitting is described using aza‐fused microporous polymers (CMP) and C₂N ultrathin nanosheets as O₂‐ and H₂‐evolving catalysts, respectively. Although neither polymer is able to split pure water using visible light, a 2:1 stoichiometric ratio of H₂ and O₂ was observed when aza‐CMP/C₂N heterostructures were used. A solar‐to‐hydrogen conversion efficiency of 0.23 % was determined, which could be further enhanced to 0.40 % by using graphene as the solid electron mediator to promote the interfacial charge‐transfer process. This study highlights the potential of polymer photocatalysts for overall water splitting.     

Polymeric Carbon Nitride/Reduced Graphene Oxide/Fe2O3: All‐Solid‐State Z‐Scheme System for Photocatalytic Overall Water Splitting

The charge transfer between hydrogen evolution photocatalysts (HEPs) and oxygen evolution photocatalysts (OEPs) is the rate‐determining step that controls the overall performance of a Z‐scheme water‐splitting system. Here, we carefully design reduced graphene oxide (RGO) nanosheets for use as solid‐state mediators to accelerate the charge carrier transfer between HEPs (e.g., polymeric carbon nitride (PCN)) and OEPs (e.g., Fe₂O₃), thus achieving efficient overall water splitting. The important role of RGO could also be further proven in other PCN‐based Z‐systems (BiVO₄/RGO/PCN and WO₃/RGO/PCN), illustrating the universality of this strategy.     

Synthesis of Tri‐functional Core‐shell CuO@carbon Quantum Dots@carbon Hollow Nanospheres Heterostructure for Non‐enzymatic H2O2 Sensing and Overall Water Splitting Applications

A core‐shell structure with CuO core and carbon quantum dots (CQDs) and carbon hollow nanospheres (CHNS) shell was prepared through facile in‐situ hydrothermal process. The composite was used for non‐enzymatic hydrogen peroxide sensing and electrochemical overall water splitting. The core‐shell structure was established from the transmission electron microscopy image analysis. Raman and UV‐Vis spectroscopy analysis confirmed the interaction between CuO and CQDs. The electrochemical studies showed the limit of detection and sensitivity of the prepared composite as 2.4 nM and 56.72 μA μM^?1 cm^?2, respectively. The core‐shell structure facilitated better charge transportation which in turn exhibited elevated electro‐catalysis towards hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting. The overpotential of 159 mV was required to achieve 10 mA cm^?2 current density for HER and an overpotential of 322 mV was required to achieve 10 mA cm^?2 current density for OER in 1.0 M KOH. A two‐electrode system was constructed for overall water splitting reaction, which showed 10 and 50 mA cm^?2 current density at 1.83 and 1.96 V, respectively. The prepared CuO@CQDs@CHNS catalyst demonstrated excellent robustness in HER and OER catalyzing condition along with overall water splitting reaction. Therefore, the CuO@CQDs@CHNS could be considered as promising electro‐catalyst for H₂O₂ sensing, HER, OER and overall water splitting.     

Z‐Scheme Photocatalytic Water Splitting on a 2D Heterostructure of Black Phosphorus/Bismuth Vanadate Using Visible Light

Spontaneously solar‐driven water splitting to produce H₂ and O₂, that is, the conversion of solar energy to chemical energy is a dream of mankind. However, it is difficult to make overall water splitting feasible without using any sacrificial agents and external bias. Drawing inspiration from nature, a new artificial Z‐scheme photocatalytic system has been designed herein based on the two‐dimensional (2D) heterostructure of black phosphorus (BP)/bismuth vanadate (BiVO₄). An effective charge separation makes possible the reduction and oxidation of water on BP and BiVO₄, respectively. The optimum H₂ and O₂ production rates on BP/BiVO₄ were approximately 160 and 102 μmol g^?1 h^?1 under irradiation of light with a wavelength longer than 420 nm, without using any sacrificial agents or external bias.     

Decoupling Hydrogen and Oxygen Production in Acidic Water Electrolysis Using a Polytriphenylamine‐Based Battery Electrode

Hydrogen production through water splitting is considered a promising approach for solar energy harvesting. However, the variable and intermittent nature of solar energy and the co‐production of H₂ and O₂ significantly reduce the flexibility of this approach, increasing the costs of its use in practical applications. Herein, using the reversible n‐type doping/de‐doping reaction of the solid‐state polytriphenylamine‐based battery electrode, we decouple the H₂ and O₂ production in acid water electrolysis. In this architecture, the H₂ and O₂ production occur at different times, which eliminates the issue of gas mixing and adapts to the variable and intermittent nature of solar energy, facilitating the conversion of solar energy to hydrogen (STH). Furthermore, for the first time, we demonstrate a membrane‐free solar water splitting through commercial photovoltaics and the decoupled acid water electrolysis, which potentially paves the way for a new approach for solar water splitting.     

Channel‐Rich RuCu Nanosheets for pH‐Universal Overall Water Splitting Electrocatalysis

Channel‐rich RuCu snowflake‐like nanosheets (NSs) composed of crystallized Ru and amorphous Cu were used as efficient electrocatalysts for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting in pH‐universal electrolytes. The optimized RuCu NSs/C‐350 °C and RuCu NSs/C‐250 °C show attractive activities of OER and HER with low overpotentials and small Tafel slopes, respectively. When applied to overall water splitting, the optimized RuCu NSs/C can reach 10 mA cm^?2 at cell voltages of only 1.49, 1.55, 1.49 and 1.50 V in 1 m KOH, 0.1 m KOH, 0.5 m H₂SO₄ and 0.05 m H₂SO₄, respectively, much lower than those of commercial Ir/C∥Pt/C. The optimized electrolyzer exhibits superior durability with small potential change after up to 45 h in 1 m KOH, showing a class of efficient functional electrocatalysts for overall water splitting.     

1‐Carboxymethyl‐3‐methyl‐1H‐imidazol‐3‐ium chloride 2‐(3‐methyl‐1H‐imidazol‐3‐ium‐1‐yl)acetate monohydrate: a crystal stabilized by imidazolium zwitterions

The title compound, C₆H₉N₂O₂⁺·Cl⁻·C₆H₈N₂O₂·H₂O, contains one 2‐(3‐methyl‐1H‐imidazol‐3‐ium‐1‐yl)acetate inner salt molecule, one 1‐carboxymethyl‐3‐methyl‐1H‐imidazol‐3‐ium cation, one chloride ion and one water molecule. In the extended structure, chloride anions and water molecules are linked via O—H...Cl hydrogen bonds, forming an infinite one‐dimensional chain. The chloride anions are also linked by two weak C—H...Cl interactions to neighbouring methylene groups and imidazole rings. Two imidazolium moieties form a homoconjugated cation through a strong and asymmetric O—H...O hydrogen bond of 2.472 (2) Å. The IR spectrum shows a continuous D‐type absorption in the region below 1300 cm⁻¹ and is different to that of 1‐carboxymethyl‐3‐methylimidazolium chloride [Xuan, Wang & Xue (2012). Spectrochim. Acta Part A, 96 , 436–443].     

Gold‐Nanoparticle‐Loaded Carbonate‐Modified Titanium(IV) Oxide Surface: Visible‐Light‐Driven Formation of Hydrogen Peroxide from Oxygen

Gold nanoparticle‐loaded rutile TiO₂ with a bimodal size distribution around 10.6 nm and 2.3 nm (BM‐Au/TiO₂) was prepared by the deposition precipitation and chemical reduction (DP‐CR) technique. Visible‐light irradiation (λ>430 nm) of the BM‐Au/TiO₂ plasmonic photocatalyst yields 35 μm H₂O₂ in aerated pure water at irradiation time (t_p)=1 h, and the H₂O₂ concentration increases to 640±60 μm by the addition of 4 % HCOOH as a sacrificing electron donor. Further, a carbonate‐modified surface BM‐Au/TiO₂ (BM‐Au/TiO₂‐CO₃^2?) generates a millimolar level of H₂O₂ at t_p=1 h with a quantum efficiency (Φ) of 5.4 % at λ=530 nm under the same conditions. The recycle experiments confirmed the stable performance of BM‐Au/TiO₂.     

Self‐assembly of a cobalt(II)‐based metal–organic framework as an effective water‐splitting heterogeneous catalyst for light‐driven hydrogen production

The solar photocatalysis of water splitting represents a significant branch of enzymatic simulation by efficient chemical conversion and the generation of hydrogen as green energy provides a feasible way for the replacement of fossil fuels to solve energy and environmental issues. We report herein the self‐assembly of a Co^II‐based metal–organic framework (MOF) constructed from 4,4′,4′′,4′′′‐(ethene‐1,1,2,2‐tetrayl)tetrabenzoic acid [or tetrakis(4‐carboxyphenyl)ethylene, H₄TCPE] and 4,4′‐bipyridyl (bpy) as four‐point‐ and two‐point‐connected nodes, respectively. This material, namely, poly[(μ‐4,4′‐bipyridyl)[μ₈‐4,4′,4′′,4′′′‐(ethene‐1,1,2,2‐tetrayl)tetrabenzoato]cobalt(II)], [Co(C₃₀H₁₆O₈)(C₁₀H₈N₂)]_n, crystallized as dark‐red block‐shaped crystals with high crystallinity and was fully characterized by single‐crystal X‐ray diffraction, PXRD, IR, solid‐state UV–Vis and cyclic voltammetry (CV) measurements. The redox‐active Co^II atoms in the structure could be used as the catalytic sites for hydrogen production via water splitting. The application of this new MOF as a heterogeneous catalyst for light‐driven H₂ production has been explored in a three‐component system with fluorescein as photosensitizer and trimethylamine as the sacrificial electron donor, and the initial volume of H₂ production is about 360 µmol after 12 h irradiation.     

Constructing SrTiO3–TiO2 Heterogeneous Hollow Multi‐shelled Structures for Enhanced Solar Water Splitting

Constructing hollow multi‐shelled structures (HoMSs) has a significant effect on promoting light absorption property of catalysts and enhancing their performance in solar energy conversion applications. A facile hydrothermal method is used to design the SrTiO₃?TiO₂ heterogeneous HoMSs by hydrothermal crystallization of SrTiO₃ on the surface of the TiO₂ HoMSs, which will realize a full coverage of SrTiO₃ on the TiO₂ surface and construct the SrTiO₃/TiO₂ junctions. The broccoli‐like SrTiO₃?TiO₂ heterogeneous HoMSs exhibited a fourfold higher overall water splitting performance of 10.6 μmol h^?1 for H₂ production and 5.1 μmol h^?1 for O₂ evolution than that of SrTiO₃ nanoparticles and the apparent quantum efficiency (AQE) of 8.6 % at 365 nm, which can be mainly attributed to 1) HoMS increased the light absorption ability of the constructed photocatalysts and 2) the SrTiO₃?TiO₂ junctions boosted the separation efficiency of the photogenerated charge carriers.     

Electrodeposited Cobalt‐Phosphorous‐Derived Films as Competent Bifunctional Catalysts for Overall Water Splitting

One of the challenges to realize large‐scale water splitting is the lack of active and low‐cost electrocatalysts for its two half reactions: H₂ and O₂ evolution reactions (HER and OER). Herein, we report that cobalt‐phosphorous‐derived films (Co‐P) can act as bifunctional catalysts for overall water splitting. The as‐prepared Co‐P films exhibited remarkable catalytic performance for both HER and OER in alkaline media, with a current density of 10 mA cm^?2 at overpotentials of ?94 mV for HER and 345 mV for OER and Tafel slopes of 42 and 47 mV/dec, respectively. They can be employed as catalysts on both anode and cathode for overall water splitting with 100 % Faradaic efficiency, rivalling the integrated performance of Pt and IrO₂. The major composition of the as‐prepared and post‐HER films are metallic cobalt and cobalt phosphide, which partially evolved to cobalt oxide during OER.