Functionalizing and controlling nanostructures resulting from block copolymer self‐assembly are key factors in defining their application. In this work, a simple but quite general route to achieve both goals simultaneously is discussed. In thin films of polystyrene‐block‐poly(vinyl pyridine) (PS‐b‐PVP) with small concentrations of a gold salt, the salt is found to complex with the PVP block which leads to an orientation of the microdomains normal to the surface after solvent annealing together with functionalization. By increasing the amount of gold salt, on the other hand, micelles are found to form in solutions leading to a range of different morphologies in the thin films.
Summary: In the present communication we describe a photolithographic method to produce polyaniline (PANI) patterns using PANI modified with a traceless removable functional group (nitrosated polyaniline, PANI‐NO) and external inexpensive polymeric photoacid generators (poly(vinyl chloride), PVC). Therefore, residual sub‐products created by irradiation of the plate do not remain occluded in the polymeric films. The borders of the patterns are better defined than in the case of chemical lithography using inorganic acids as the hydrolyzing agent.
A temperature‐sensitive polymer/carbon nanotube interface with switchable bioelectrocatalytic capability was fabricated by self‐assembly of poly(N‐isopropylacrylamide)‐grafted multiwalled carbon nanotubes (MWNT‐g‐PNIPAm) onto the PNIPAm‐modified substrate. Electron microscopy and electrochemical measurements revealed that these fairly thick (>6 μm) and highly porous nanocomposite films exhibited high conductivity and electrocatalytic activity. The morphological transitions in both the tethered PNIPAm chains on a substrate and those polymers wrapping around the MWNT surface resulted in the opening, closing, or tuning of its permeability, and simultaneously an electron‐transfer process took place through the channels formed in the nanostructure in response to temperature change. By combining the good electron‐transfer and electrochemical catalysis capabilities, the large surface area, and good biocompatibility of MWNTs with the responsive features of PNIPAm, reversible temperature‐controlled bioelectrocatalysis of 1,4‐dihydro‐β‐nicotinamide adenine dinucleotide with improved sensitivity has been demonstrated by cyclic voltammetry and electrochemical impedance spectroscopy measurements. The mechanism behind this approach was studied by Raman spectroscopy, in situ attenuated total reflection FTIR spectroscopy, and contact angle measurements. The results also suggested that the synergetic or cooperative interactions of PNIPAm with MWNTs gave rise not only to an increase in surface wettability, but also to the enhancement of the interfacial thermoresponsive behavior. This bioelectrocatalytic “smart” system has potential applications in the design of biosensors and biofuel cells with externally controlled activity. Furthermore, this concept might be proposed for biomimetics, interfacial engineering, bioelectronic devices, and so forth. 相似文献
The effect of the initial states (disordered perpendicular cylinder structure vs. parallel cylinder structure) on the crystallization of polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) thin films during cyclohexane annealing was investigated. The cylindrical domains perpendicular or parallel to the surface were obtained by controlling the film thickness. During solvent annealing, for the film with the perpendicular cylinders, the ordering degree of cylinders was increased. The enthalpic increase is large enough for the forming of square‐shaped crystals, and subsequently the square‐shaped single crystals surrounded by the ordered hexagonally packed perpendicular cylinders evolved to the dendrite ones. For the film with the parallel cylinders, the parallel cylinders were translated to the perpendicular ones. The increased enthalpy was not large enough for the formation of square‐shaped single crystals. Instead, the dendrite‐like crystals started at the edge of terraces.
Localized inclusions of liquids provide solid materials with many functions, such as self‐healing, secretion, and tunable mechanical properties, in a spatially controlled mode. However, a strategy to control the distribution of liquid droplets in solid matrices directly obtained from a homogeneous solution has not been reported thus far. Herein, we describe an approach to selectively localize liquid droplets in a supramolecular gel directly obtained from its solution by using evaporative lithography. In this process, the formation of droplet‐embedded domains occurs in regions of free evaporation where the non‐volatile liquid is concentrated and undergoes a phase separation to create liquid droplets prior to gelation, while a homogeneous gel matrix is formed in the regions of hindered evaporation. The different regions of a coating with droplet embedment patterns display different secretion abilities, enabling the control of the directional movement of water droplets. 相似文献
Little is known about how functional regulation failure in genetically altered cells is influenced by topographical confinement of cells, a situation often present in tissues in vivo. We used cultured melanocytes derived from human skin samples as a model system for such investigations. Normal melanocytes have a very well defined shape consisting of a cell body and two dendrites arranged 180° relative to each other. In contrast, neurofibromin 1‐melanocytes (NF1‐melanocytes) have up to a 50 % reduction of neurofibromin 1, which results in an altered morphology that can be easily measured. NF1‐melanocytes deviate from the defined structure of normal melanocytes by forming more than two dendrites per cell. We show that morphology consequences of genetically altered melanocytes can be canceled if cells interact with substrates microstructured by stripes that apply mechanophysical signals in the form of physical topography. The strength of the mechanophysical signal was varied systematically by increasing the height of the microstructures. Melanocytes respond to surface topographical features that are larger than 50 nm and have lateral confinements smaller 4 μm. The response of normal and NF1‐melanocytes to different topographies was analyzed quantitatively by determining density distributions for the number of dendrites per cell, the angles between dendrites, and the orientation imprinted in the substrate. The synthesis of melanin, a pigment produced by melanocytes, differs in the case of genetically altered NF1‐ and normal melanocytes. In both cases, the interaction with microstripes enhanced melanin production significantly. This enhanced melanin production is speculated to be caused by the mechanical stabilization of the dendrites by substrate guidance.相似文献
An efficient procedure to create oriented polymer films with strongly anisotropic properties is described. It is based on a two‐step process combining a photochemical and a thermal aligning step. The orientation of the polymer parallel or perpendicular to linearly polarised incident light can be adjusted. The method presented allows for simple fabrication of films with anisotropic absorption and emission characteristics with a dichroism of 0.7 and a fluorescence anisotropy of about 8.
Nanoscale polymer thin films exhibit strong confinement effects on Tg arising from free surfaces. However, the coupled influence of molecular weight (MW) and surface effects on Tg is not well understood for low MW film systems below the entanglement length. Utilizing atomistically informed coarse‐grained molecular dynamics simulations for poly(methyl methacrylate) (PMMA), it is demonstrated that the decrease in free‐standing film Tg with respect to bulk is more significant for low MW compared to high MW systems. Investigation of the local interfacial properties reveals that the increase in the local free volume near the free surface is greater for low MW, explaining the MW dependence of Tg‐confinement behaviors. These findings corroborate recent experiments on low MW films, and highlight the relationship between nanoconfinement phenomena and local free volume effects arising from free surfaces.
Abstract A general approach to the chromatographic analysis of quaternary ammonium compounds on silica gel thin layers is described. The quaternary cations migrate as ion pairs with bromide or iodide as counter ions. Methanol or chloroform-methanol mixtures serve as developing solvents, in which excess amounts of NaBr or NaI are dissolved. If the solvent cannot dissolve sufficient quantities of halide salts, the latter can be sprayed onto the plate as a methanol solution prior to development. The separation patterns of the quaternary ammonium compounds can be influenced by the choice of counter ion and by the choice of the organic solvent components. 相似文献
下载免费PDF全文