The system CePO4–K3PO4

The phase diagram of the system CePO₄–K₃PO₄ has been determined based on investigations by differential thermal analysis, X-ray powder diffraction, IR spectroscopy and optical microscopy. The system contains only one intermediate compound K₃Ce(PO₄)₂, which melts incongruently at (1500±20)°C. This compound is stable down to room temperature and exhibits a polymorphic transition at 1180°C. It was confirmed that the low-temperature form β-K₃Ce(PO₄)₂ crystallizes in a monoclinic system, space group P2₁/m with unit cell parameters a=9.579 (5), b=5.634 (6), c=7.468 (5) Å; =γ=90°, β=90.81 (3)°; V=403.083 Å³.     

Thermal and spectroscopic studies of scandium complex of 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone

The scandium complexes of Sc(PMBP)₃·H₂O (non-crystal) and Sc(PMBP)₃ (crystal) with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP) were prepared and characterized by thermal analysis, IR, NMR and MS spectroscopies. The crystal structure of the complex, obtained by X-ray analysis, indicates that PMBP is a bidentate ligand in the complex and that the Sc atom is six-coordinate and is in a meridional octahedral environment. The order of the ring current effect on the pyrazolone ring is Sc(PMBP)₃ >PMBP(enol)> PMBP(keto).

The metal to ligand stoichiometry was found to be 1:3. The crystalline complex melts at 209 °C, followed by degradation at about 310 °C, with the beginning of decomposition. The enthalpy of melting was found to be 61 kJ/mol. On the other hand, the non-crystalline complex was found to change into a crystalline complex at 176 °C with an exothermic reaction before melting at 217 °C. The IR band observed at approximately, 450 cm⁻¹ is possibly due to the stretching of the Sc–O bond.     

The effect of humidity on dehydration behavior of nitrofurantoin monohydrate studied by humidity controlled simultaneous instrument for X-ray Diffractometry and Differential Scanning Calorimetry (XRD–DSC)

The dependence of thermal dehydration behavior of nitrofurantoin monohydrate on humidity was studied. Difference in observed crystallinity of resulting anhydrates under three humidity conditions is discussed in relation to the effect of water vapor molecules. Thermal dehydration of nitrofurantoin monohydrate was measured using a humidity controlled simultaneous measurement instrument for X-ray Diffractometry (XRD) and Differential Scanning Calorimetry (DSC) in dry, 27 °C 91% RH and 60 °C 90% RH nitrogen. Dehydration of nitrofurantoin in dry nitrogen gave a mixture of crystalline and amorphous anhydrates in the temperature range of 124–180 °C followed by crystallization around 185–190 °C. Whereas, dehydration in high humidity atmosphere (60 °C 90% RH or 17.7% H₂O–82.3% N₂) gave well crystallized anhydrate at 140 °C soon after dehydration. Dehydration in low humidity nitrogen (27 °C 91% RH or 3.2% H₂O–96.8% N₂) gave not totally crystalline anhydrate, which became pure crystalline at around 190 °C. The effect of high humidity on dehydration and crystallinity of the resulting anhydrate can be attributed to the role of water vapor molecules in two ways such as the acceleration of molecular mobility and high molecular diffusion rate of nitrofurantoin anhydrate, and the formation of hydrogen bonding bridges quickly connecting dehydrated molecules to one another.     

Thermoluminescence characteristics of minerals from irradiated potatoes of different origins of production

Thermoluminescence (TL) characteristics were investigated for minerals, which were separated from potatoes irradiated at 0–1 kGy of different origins of production in Korea. The polyminerals analyzed by X-ray diffractometer were mainly composed of quartz and feldspar, and showed varied contents with producing origins, that contributed to typical TL responses to irradiation. The glow curve of irradiated samples at 0.05–1 kGy peaked at approximately 200°C with high intensity, but that of non-irradiated potatoes was observed at approximately 300°C with low intensity. Discrimination between irradiated (more than 0.05 kGy) and non-irradiated samples was possible just on the basis of the first glow curve, however, normalization of results through a re-irradiation step greatly improved their reliability. The signal intensity of TL decreased with the lapse of post-irradiation time under different storage conditions (0±0.5°C/dark room, 25±5°C/dark room and 25±5°C/naturally lighted room) but was still distinguishable from that of the non-irradiated sample even after one year.     

Characterization of surface interaction of inorganic fillers with silane coupling agents

Coupling agent (CA) can not only help filler achieve better dispersion in polymer matrix, but also improve the roughness of the composite with good rigidity at the same time. In this paper, the interaction of silane coupling agents with inorganic fillers (in our case are Mg(OH)₂ and CaCO₃) were studied by pyrolysis gas chromatography (PGC), as well as Fourier transform infrared spectroscopy. By two-step pyrolysis (first at 250 °C, then at 600 °C), physisorbed and chemisorbed silane on fillers can be distinguished. The bonded silane cannot be flash vaporized at 250 °C, it results in new peaks different from that of silane in pyrograms at 600 °C. The chemisorbed amount of silane increases with time and temperature and finally reaches a plateau. The result showed that PGC was an effective analytical tool to prove the existence of interaction between inorganic filler and CA.     

The fate of As, Pb, Cd, Cr and Mn in a coal during pyrolysis

Transformation of As, Pb, Cd, Cr, and Mn in Chinese Datong coal during pyrolysis was studied. Experiments were carried out in a fixed-bed quartz reactor with a heating rate of 20 °C min⁻¹. Effects of the final temperature (300–1000 °C) and atmosphere (N₂ and H₂ at 0.1 MPa) were examined. Chemical form distribution of the elements in the coal and coal-derived chars (obtained at 1000 °C under N₂ and H₂) was investigated. As, Pb, Cr, Cd, and Mn in the coal and the chars were classified into five chemical forms (ion exchangeable, bound to carbonates, bound to Fe–Mn oxides, bound to organic matter, and in the residue) by a sequential dissolution method. Results show that As, Pb, and Cd are more volatile and tend to enrich in the volatile phase in the pyrolysis. Cr and Mn are relative non-volatile and tend to enrich in the solid phase. H₂ atmosphere promotes the release of the elements. The elements in all the five chemical forms undergo transformation in pyrolysis, and As, Pb, Cr and Cd show similar behavior.     

Stability of phospholipid vesicles studied by asymmetrical flow field-flow fractionation and capillary electrophoresis

The stability of zwitterionic phosphatidylcholine vesicles in the presence of 20 mol% phosphatidyl serine (PS), phosphatidic acid (PA), phosphatidyl inositol (PI), and diacylphosphatidyl glycerol (PG) phospholipid vesicles, and cholesterol or calcium chloride was investigated by asymmetrical flow field-flow fractionation (AsFlFFF). Large unilamellar vesicles (LUV, diameter 100 nm) prepared by extrusion at 25 °C were used. Phospholipid vesicles (liposomes) were stored at +4 and −18 °C over an extended period of time. Extruded egg yolk phosphatidylcholine (EPC) particle diameters at peak maximum and mean measured by AsFlFFF were 101 ± 3 nm and 122 ± 5 nm, respectively. No significant change in diameter was observed after storage at +4 °C for about 5 months. When the storage period was extended to about 8 months (250 days) larger destabilized aggregates were formed (172 and 215 nm at peak maximum and mean diameters, respectively). When EPC was stored at −18 °C, large particles with diameters of 700–800 nm were formed as a result of dehydration, aggregation, and fusion processes. In the presence of calcium chloride, EPC alone did not form large aggregates. Addition of 20 mol% of negatively charged phospholipids (PS, PA, PI, or PG) to 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC) vesicles increased the electrostatic interactions between calcium ion and the vesicles and large aggregates were formed. In the presence of cholesterol, large aggregates of about 250–350 nm appeared during storage at +4 and −18 °C for more than 1 day.

The effect of liposome storage temperature on phospholipid coatings applied in capillary electrophoresis (CE) was studied by measuring the electroosmotic flow (EOF). EPC coatings with and without cholesterol, PS, or calcium chloride, prepared from liposomes stored at +25, +4, and −18 °C, were studied at 25 °C. The performances of the coatings were further evaluated with three uncharged compounds. Only minor differences were observed between the same phospholipid coatings, showing that phospholipid coatings in CE are relatively insensitive to storage at +25, +4 °C or −18 °C.     

Zirconia-supported phosphotungstic acid as catalyst for alkylation of phenol with benzyl alcohol

The liquid-phase alkylation of phenol with benzyl alcohol was carried out using zirconia-supported phosphotungstic acid (PTA) as catalyst. The catalysts with different PTA loadings (5–20 wt.% calcined at 750 °C) and calcination temperature (15 wt.% calcined from 650 to 850 °C) were prepared and characterized by ³¹P MAS NMR and FT-IR pyridine adsorption spectroscopy. The catalyst with optimum PTA loading (15%) and calcination temperature (750 °C) was prepared in different solvents. ³¹P MAS NMR spectra of the catalysts showed two types of phosphorous species, one is the Keggin unit and the other is the decomposition product of PTA and the relative amount of each depends on PTA loading, calcination temperature and the solvent used for the catalyst preparation. The catalysts with 15% PTA on zirconia calcined at 750 °C showed the highest Brönsted acidity. At 130 °C and phenol/benzyl alcohol molar ratio of 2 (time, 1 h), the most active catalyst, 15% PTA calcined at 750 °C gave 98% benzyl alcohol conversion with 83% benzyl phenol selectivity.     

Equilibrium of the reaction between dissolved sodium sulfide and biologically produced sulfur

The equilibrium of the heterogeneous reaction between dissolved sodium sulfide and biologically produced sulfur particles has been studied. Biologically produced sulfur was obtained from a bioreactor of a hydrogen sulfide removal process in which the dominating organism is Thiobacillus sp. W5. Detailed knowledge of this reaction is essential to understand its effect on the process. The results were compared with the equilibrium of the reaction of sulfide with ‘inorganic’ elemental sulfur. The equilibrium between dissolved sodium sulfide and biologically produced sulfur particles can be described by an equilibrium constant, K_x, which consists of a weighted sum of constants for polysulfide ions of different chain length, rather than a true single equilibrium constant. For biologically produced sulfur pK_x = 9.10 ± 0.08 (21 °C) and 9.17 ± 0.09 (35 °C) with an average polysulfide chain length x = 4.91 ± 0.32 (21 °C) and 4.59 ± 0.31 (35 °C). The pK_x value for biologically produced sulfur is significantly higher than for reaction of dissolved sodium sulfide with inorganic sulfur (pK_x = 8.82; 21 °C). This difference is probably caused by the negatively charged polymeric organic layer, which is present on biologically produced sulfur but absent with “inorganic” sulfur. Specific binding of polysulfide ions to the organic layer results in a higher polysulfide concentration at the reaction site compared to the bulk concentration. This results in an apparent decrease of the measured equilibrium constant, K_x.     

Phase behavior, conformations, thermodynamic properties, and molecular motion of multicomponent paraffin waxes: A Raman spectroscopy study

Variable-temperature (72–20 °C) studies of Raman spectra (3100–800 cm⁻¹) and thermal analysis of multicomponent paraffin wax have been carried out. The disorder–order transition under liquid–solid transition was observed and their temperature ranges were obtained through the S_lateral order parameter as a function of temperature. From 56 to 43 °C, the paraffin undergoes a conformational state transition of non-extended chain state (NECS) to extended chain state (ECS). The enthalpy and entropy change for the transition obtained by van’t Hoff analysis were 214.286 ± 21 kJ/mol and 0.661 ± 0.066 kJ/mol/K, respectively. The enthalpy determined by differential scanning calorimetry (DSC) was 52.165 ± 5.2 kJ/mol, which is smaller than the van’t Hoff enthalpy due to larger effective non-extended chain state. The variation of Raman spectra with decreasing temperature presents the structure evolution and molecular motion during the crystallization of paraffin wax.     

Dehydration of magnesium sulphate heptahydrate investigated by quasi isothermal—quasi isobaric TG

With the help of the quasi isothermal-quasi isobaric technique, completed with DTA and thermomicroscopic examinations, several new observations have been made regarding the dehydration process of MgSO₄ · 7 H₂O. It was found that under given conditions the material, first at 50°C and then at 95°C, melts in an incongruous way. In the course of the latter transformation, a ternary system consisting of solid MgSO₄ · 3 H₂O, a solution phase saturated with respect to the trihydrate, and a water vapour phase, is formed. The saturated solution reaches its boiling point at 105°C. Without any temperature change, the system loses four moles of water and solid MgSO₄ · 3 H₂O remains. This decomposes at 115°C and a mixture consisting of MgSO₄ · H₂O and MgSO₄ · 2 H₂O forms, the proportion of which depends on the experimental conditions. At 150°C, the latter compound loses one mole of water. The MgSO₄ · H₂O maintains constant weight up to 310°C, above which temperature the remaining water of crystallization is removed.     

A simultaneous TG–DTA study of the thermal decomposition of 2-hydroxybenzoic acid, 2-carboxyphenyl ester (salsalate)

Simultaneous thermogravimetry–differential thermal analysis (TG–DTA) and gas and liquid chromatography with mass spectrometry detection have been used to study the kinetics and decomposition of 2-hydroxybenzoic acid, 2-carboxyphenyl ester, commercially known as salsalate. Samples of salsalate were heated in the TG–DTA apparatus in an inert atmosphere (100 ml min⁻¹ nitrogen) in the temperature range 30–500 °C. The data indicated that the decomposition of salsalate is a two-stage process. The first decomposition stage (150–250 °C) had a best fit with second-order kinetics with E_a=191–198 kJ/mol. The second decomposition stage (300–400 °C) is described as a zero-order process with E_a=72–80 kJ/mol. The products of the decomposition were investigated in two ways:

(a)Salsalate was heated in a gas chromatograph at various isothermal temperatures in the range 150–280 °C, and the exit gas stream analyzed by mass spectrometry (GC–MS). This approach suggested that salsalate decomposes with the formation of salicylic acid, phenol, phenyl salicylate, and cyclic oligomers of salicylic acid di- and tri-salicylides.

(b)One gram samples of salsalate were heated in a vessel under nitrogen to 150 °C, and the residues were analyzed by liquid chromatography–mass spectrometry (LC–MS). The major compound detected was a linear tetrameric salicylate ester.

     

Isothermal kinetic analysis of the thermal decomposition of magnesium hydroxide using thermogravimetric data

In the present study, the kinetics of the thermal decomposition of magnesium hydroxide is investigated, using isothermal methods of kinetic analysis. For this purpose, experiments in thermogravimetric analyser were carried out in standard values of temperature (350°, 400°, 450° and 500°C) which resulted in weight loss percent as a function of time. The data were further modified to give fraction reacted ‘' versus time to be tested in various forms of ‘' functions. In order to determine the mechanism of the magnesium hydroxide decomposition and the form of the conversion function which governs the dehydroxylation of Mg(OH)₂, four different methods of isothermal kinetic analysis were used. Applying each of these methods to the data, it was concluded that the nucleation mechanism predominates the Mg(OH)₂, decomposition for all values of temperature tested; at 350°C the kinetic model which represents the experimental data is that of reaction at phase boundaries (random nucleation), F₁: ln(1−)=kt) while for the higher temperatures 400°, 450° and 500°C the kinetic equation of nucleation and development in two dimensions, A₂: [−ln (1−)]^1/2=kt was found to fit better the experimental results. The activation energy was evaluated applying two alternative methods; the Arrhenius plot, using maximum rates of reaction, from which the activation energy was evaluated to be 20.54 kcal/mol. An alternative method based on plots of ln t versus 1/T corresponding to the same value of ‘' gave values of 10.72, 13.82 and 16.31 kcal/mol for ‘' values of 0.25, 0.50 and 0.75, respectively.     

Isothermal nucleation and growth kinetics of Pd/Ag alloy phase via in situ time-resolved high-temperature X-ray diffraction (HTXRD) analysis

Among several different approaches to form Pd/Ag alloys for hydrogen separation applications, ex situ studies carried out by conventional X-ray point scanning detectors might fail to reveal the key aspects of the phase transformation between Pd and Ag metals. In this respect, in situ time-resolved high-temperature X-ray diffraction (HTXRD) was employed to study the Pd/Ag alloy phase nucleation and growth kinetics. By the use of linear position sensitive detectors, advanced optics and profile fitting with the use of JADE-6.5 software, isothermal phase evolution of the Pd/Ag alloy at 500 °C, 550 °C and 600 °C under hydrogen atmosphere were quantified to elucidate the mechanistic details of the Pd/Ag alloy phase nucleation and growth pattern. Analysis of the HTXRD data by the Avrami model indicated that the nucleation of the Pd/Ag alloy phase was instantaneous where the growth mechanism was through diffusion-controlled one-dimensional thickening of the Pd/Ag alloy layer. The value of the Avrami exponent, n, was found to increase with temperature with the values of 0.34, 0.39 and 0.67 at 500 °C, 550 °C and 600 °C, respectively. In addition, parabolic rate law analysis suggested that the nucleation of the Pd/Ag alloy phase was through a heterogeneous nucleation mode, in which the nucleation sites were defined as the non-equilibrium defects. Indeed, the cross-sectional SEI micrographs indicated that the Pd/Ag alloy phase growth was strongly dependent upon the deposition morphology of the as-synthesized Pd and Ag layers formed by the electroless plating. Based on the Avrami model and the parabolic rate law, the estimated activation energies for the phase transformation were 236.5 kJ/mol and 185.6 kJ/mol and in excellent agreement with the literature values (183–239.5 kJ/mol). Finally, the in situ annealing of the 15.6 μm thick composite Pd/Ag/PSS membrane at 550 °C in hydrogen atmosphere indicated that the Pd/Ag alloy phase formation was not complete even after 500 h. According to the Avrami model, the increase in the hydrogen permeance from 7.1 m³/m² h atm^0.5 to 21.3 m³/m² h atm^0.5 at 550 °C over a period of 500 h corresponded to an 83% Pd/Ag alloy phase formation.     

Theoretical study on the intramolecular proton transfer reactions of 3-methyl-5-hydroxyisoxazole and its water complexes

The optimized structures and proton transfer reactions of 3-methyl-5-hydroxyisoxazole and its water complexes (3-M-5-HIO · (H₂O)_n · (n = 0–3)) were computed at B3LYP and MP2 theoretical level. The results indicates that 3-M-5-HIO has four isomers (Ecis, Etrans, K1 and K2), and the keto tautomer, and K2 is the most stable isomer in the gas phase. Hydrogen bonding between 3-M-5-HIO and the water molecules can dramatically lower the barrier by the concerted transfer mechanism. Ecis · (H₂O)₃ → K1 · (H₂O)₃ and Ecis · (H₂O)₂ → K2 · (H₂O)₂ is found to be very efficient. Comparing with the proton transfer mechanism of 5-HIO shows that the methyl substitution prevents the intramolecular proton transfer.     

Thermogravimetric analysis of aluminised E-glass fibre reinforced unsaturated polyester composites

Novel aluminised E-glass fibre reinforced unsaturated polyester composites, originally formulated for enhanced thermal and electrical shielding properties were evaluated in terms of their thermal performance. The thermal degradation of these specimens was analysed using a thermogravimetric analyser (TGA). The samples were heated from ambient temperature to 500 °C at a heating rate of 20 °C/min. All specimens were decomposed under dry nitrogen (N₂) at a flow rate of 40 ml/min to yield gases and solid char. Aluminised E-glass composites were compared alongside the unmetallised E-glass and unreinforced composite. The major weight loss occurred between 200 and 400 °C. The unreinforced polyester had a maximum weight loss, 1.25%/°C, occurring at 360 °C. For the aluminised and unmetallised E-glass composites, the maximum rate of weight loss was 0.34 and 0.55%/°C, respectively. Experimental results show the degradation of the aluminised E-glass composites obtained from TGA tests is higher compared to those of unmetallised E-glass fibre and unreinforced polyester composite. This improvement is correlated to the aluminium coating.     

Measurement of glass transition temperature by mechanical (DMTA), thermal (DSC and MDSC), water diffusion and density methods: A comparison study

Glass transition measured by DMTA from the change in slope in storage modulus was 55 °C, which was 10.5 °C lower than the value measured by tan δ peak. Initial glass transition measured by DSC, increased exponentially and reached a constant value of 55 °C at or higher heating rate of 30 °C/min. Transition temperature, measured by MDSC, remained constant up to heating rate 15 °C/min and then decreased. The glass transition values determined from reversible heat flow was 60 °C. The break in diffusivity and density (i.e. volume) was observed at 50 °C below the glass transition temperature measured by thermal and mechanical methods.     

Production of liquid fuels and chemicals from pyrolysis of Bangladeshi bicycle/rickshaw tire wastes

Tire wastes in the form of used bicycle/rickshaw tires available in Bangladesh were pyrolyzed in a fixed-bed fire-tube heating reactor under different pyrolysis conditions to determine the role of final temperature, sweeping gas flow rate and feed size on the product yields and liquid product composition. Final temperature range studied was between 375 and 575 °C and the highest liquid product yield was obtained at 475 °C. Liquid products obtained under the most suitable conditions were characterized by elemental analyses, FT-IR, ¹H NMR and GC–MS techniques. The results show that it is possible to obtain liquid products that are comparable to petroleum fuels and valuable chemical feedstock from bicycle/rickshaw tire wastes if the pyrolysis conditions are chosen accordingly.     

Thermal decomposition and X-ray diffraction of sulphate efflorescent minerals from El Jaroso Ravine, Sierra Almagrera, Spain

Two evaporite minerals from the El Jaroso Ravine, Spain have been analysed by thermogravimetry coupled with an evolved gas mass spectrometer. X-ray diffraction results proved the evaporite minerals were a mixture of sulphates including the minerals magnesiocopiapite, coquimbite and possibly alunogen. Thermal decomposition of the unoxidised samples showed steps at 52, 99 and 143 °C confirmed by mass spectrometric results and attributed to adsorbed water, interstitial water and chemically bonded water. This evaporite mineral rock showed two higher temperature decomposition steps at 555 and 599 °C with mass losses of 19.6 and 7.8%. Slightly different temperatures for the thermal decomposition of the oxadada sample were observed at 52, 64.5 and 100 °C. Two higher temperature mass loss steps at 560.5 and 651 °C were observed for the oxidised sample. By comparison of the thermal analysis patterns of halotrichite and jarosite it can be shown that the El Jaroso samples are mineral sulphates and not halotrichite or jarosite.