Scale up and Application of Biosurfactant from <Emphasis Type="Italic">Bacillus subtilis</Emphasis> in Enhanced Oil Recovery

There is a lack of fundamental knowledge about the scale up of biosurfactant production. In order to develop suitable technology of commercialization, carrying out tests in shake flasks and bioreactors was essential. A reactor with integrated foam collector was designed for biosurfactant production using Bacillus subtilis isolated from agricultural soil. The yield of biosurfactant on biomass (Y _p/x), biosurfactant on sucrose (Y _p/s), and the volumetric production rate (Y) for shake flask were obtained about 0.45 g g⁻¹, 0.18 g g⁻¹, and 0.03 g l⁻¹ h⁻¹, respectively. The best condition for bioreactor was 300 rpm and 1.5 vvm, giving Y _x/s, Y _p/x, Y _p/s, and Y of 0.42 g g⁻¹, 0.595 g g⁻¹, 0.25 g g⁻¹, and 0.057 g l⁻¹ h⁻¹, respectively. The biosurfactant maximum production, 2.5 g l⁻¹, was reached in 44 h of growth, which was 28% better than the shake flask. The obtained volumetric oxygen transfer coefficient (K _L a) values at optimum conditions in the shake flask and the bioreactor were found to be around 0.01 and 0.0117 s⁻¹, respectively. Comparison of K _L a values at optimum conditions shows that biosurfactant production scaling up from shake flask to bioreactor can be done with K _L a as scale up criterion very accurately. Nearly 8% of original oil in place was recovered using this biosurfactant after water flooding in the sand pack.     

Production of Lipids Containing High Levels of Docosahexaenoic Acid by a Newly Isolated Microalga, <Emphasis Type="Italic">Aurantiochytrium</Emphasis> sp. KRS101

In the present study, a novel oleaginous Thraustochytrid containing a high content of docosahexaenoic acid (DHA) was isolated from a mangrove ecosystem in Malaysia. The strain identified as an Aurantiochytrium sp. by 18S rRNA sequencing and named KRS101 used various carbon and nitrogen sources, indicating metabolic versatility. Optimal culture conditions, thus maximizing cell growth, and high levels of lipid and DHA production, were attained using glucose (60 g l⁻¹) as carbon source, corn steep solid (10 g l⁻¹) as nitrogen source, and sea salt (15 g l⁻¹). The highest biomass, lipid, and DHA production of KRS101 upon fed-batch fermentation were 50.2 g l⁻¹ (16.7 g l⁻¹ day⁻¹), 21.8 g l⁻¹ (44% DCW), and 8.8 g l⁻¹ (40% TFA), respectively. Similar values were obtained when a cheap substrate like molasses, rather than glucose, was used as the carbon source (DCW of 52.44 g l⁻¹, lipid and DHA levels of 20.2 and 8.83 g l⁻¹, respectively), indicating that production of microbial oils containing high levels of DHA can be produced economically when the novel strain is used.     

Variable Volume Fed-Batch Fermentation for Nisin Production by <Emphasis Type="Italic">Lactococcus lactis</Emphasis> subsp<Emphasis Type="Italic">. lactis W28</Emphasis>

A feeding technology that was suitable for improving the nisin production by Lactococcus lactis subsp. lactis W28 was established. The effects of initial sucrose concentration (ISC) in the fermentation broth, feeding time, and feeding rate on the fermentation were studied. It was observed that a fed-batch culture (ISC = 10 g l⁻¹) with 100 ml sucrose solution (190 g l⁻¹) being evenly fed (9–10 ml h⁻¹) into the fermenter after 3-h fermentation gave the best performance in terms of biomass and nisin yield. Under these conditions, the total biomass and the total nisin yield were approximately 23% and 51% higher than those in batch fermentation, respectively. When the sucrose concentration was controlled at 5–10 g l⁻¹ in variable volume intermittent fed-batch fermentation (VVIF) with ISC = 10 g l⁻¹, the total biomass and the total nisin yield were 29% and 60% above those in batch fermentation, respectively. The VVIF proved to be effective to eliminate the substrate inhibition by maintaining sucrose at appropriate levels. It is also easy to be scaled up, since various parameters involved in industrial production were taken into account.     

Overproduction of Glucoamylase by a Deregulated Mutant of a Thermophilic Mould <Emphasis Type="Italic">Thermomucor indicae-seudaticae</Emphasis>

Thermomucor indicae-seudaticae, a glucoamylase-producing thermophilic mould, was mutagenised using nitrous acid and gamma (⁶⁰Co) irradiation in a sequential manner to isolate deregulated mutants for enhanced production of glucoamylase. The mutants were isolated on Emerson YpSs agar containing a non-metabolisable glucose analogue 2-deoxy-d-glucose (2-DG) for selection. The preliminary screening for glucoamylase production using starch–iodine plate assay followed by quantitative confirmation in submerged fermentation permitted the isolation of several variants showing varying levels of derepression and glucoamylase secretion. The mutant strain T. indicae-seudaticae CR19 was able to grow in the presence of 0.5 g l⁻¹ 2-DG and produced 1.8-fold higher glucoamylase. As with the parent strain, glucoamylase production by T. indicae-seudaticae CR19 in 250-ml Erlenmeyer flasks attained a peak in 48 h of fermentation, showing higher glucoamylase productivity (0.67 U ml⁻¹ h⁻¹) than the former (0.375 U ml⁻¹ h⁻¹). A large-scale cultivation in 5-l laboratory bioreactor confirmed similar fermentation profiles, though the glucoamylase production peak was attained within 36 h attributable to the better control of process parameters. Although the mutant grew slightly slow in the presence of 2-DG and exhibited less sporulation, it showed faster growth on normal Emerson medium with a higher specific growth rate (0.138 h⁻¹) compared to the parent strain (0.123 h⁻¹). The glucoamylase produced by both strains was optimally active at 60 °C and pH 7.0 and displayed broad substrate specificity by cleaving α-1,4- and α-1,6-glycosidic linkages in starch, amylopectin, amylose and pullulan. Improved productivity and higher specific growth rate make T. indicae-seudaticae CR19 a useful strain for glucoamylase production.     

Kinetics of Growth and Enhanced Sophorolipids Production by Candida bombicola Using a Low-Cost Fermentative Medium

In this study, effect of various parameters on sophorolipid (SL) production by the yeast Candida bombicola was investigated for the enhancing of its production by employing L18 orthogonal array design of experiments. At optimum conditions of sugarcane molasses 50 g l⁻¹, soybean oil 50 g l⁻¹, inoculum size 5% (v/v), temperature 30 °C, inoculum age 2 days, and agitation 200 rpm, the yeast produced almost equal amounts of the product in batch shake flasks and in a 3-l fermentor without any pH control (45 and 47 g l⁻¹, respectively). However, the yield increased to 60 g l⁻¹ in the fermentor under controlled pH environment. Time course of SL production, yeast biomass growth, and utilization of sugarcane molasses and soybean oil at these optimized conditions were fitted to existing kinetic models reported in the literature. Estimated kinetic parameters from these models suggested that conventional medium containing glucose can very well be replaced with the present low-cost fermentative medium.     

Effect of Constant Glucose Feeding on the Production of Exopolysaccharides by <Emphasis Type="Italic">Tremella fuciformis</Emphasis> Spores

A fed-batch culture system with constant feeding (glucose 80 g L⁻¹, 0.25 ml min⁻¹) was used to study the influence of glucose on cell dry weight and exopolysaccharides production from submerged Tremella fuciformis spores in a 5-L stirred-tank bioreactor. The results showed that high levels of cell mass (9.80 g L⁻¹) and exopolysaccharides production (3.12 g L⁻¹) in fed-batch fermentation were obtained after 1 h of feeding, where the specific growth rate (μ) and exopolysaccharides yield on substrate consumed (YP/S) were 0.267 d⁻¹ and 0.14 g g⁻¹. Unlike batch fermentation, maximal cell mass and exopolysaccharides production merely reached 7.11 and 2.08 g L⁻¹; the specific growth rate (μ) and exopolysaccharides yield on substrate consumed (YP/S) were 0.194 d⁻¹ and 0.093 g g⁻¹, respectively. It is concluded that the synthesis of exopolysaccharides can be promoted effectively when feeding glucose at a late exponential phase.     

Lipase production by Penicillium restrictum using solid waste of industrial babassu oil production as substrate

Lipase, protease, and amylase production by Penicillium restrictum in solid-state fermentation was investigated. The basal medium was an industrial waste of babassu oil (Orbignya oleifera) production. It was enriched with peptone, oliveoil, and Tween-80. The supplementation positively influenced both enzyme production and fungal growth. Media enriched with Tween-80 provided the highest protease activity (8.6 U/g), whereas those enriched with peptone and olive oil led to the highest lipase (27.8 U/g) and amylase (31.8 U/g) activities, respectively.     

Production of Raw Starch-Saccharifying Thermostable and Neutral Glucoamylase by the Thermophilic Mold <Emphasis Type="Italic">Thermomucor indicae-seudaticae</Emphasis> in Submerged Fermentation

Among physical and nutritional parameters optimized by “one variable at a time” approach, four cultural variables (sucrose, MgSO₄ ^.7H₂O, inoculum size, and incubation period) significantly affected glucoamylase production. These variables were, therefore, selected for optimization using response surface methodology. The p-values of the coefficients for linear effect of sucrose and inoculum size were less than 0.0001, suggesting them to be the key experimental variables in glucoamylase production. The enzyme production (34 U/ml) attained under optimized conditions (sucrose, 2%; MgSO₄ ^.7H₂O, 0.13%; yeast extract, 0.1%; inoculum size, 5 × 10⁶ spores per 50 ml production medium; incubation time, 48 h; temperature, 40°C; and pH 7.0) was comparable with the value predicted by polynomial model (34.2 U/ml). An over all 3.1-fold higher enzyme titers were attained due to response surface optimization. The experimental model was validated by carrying out glucoamylase production in shake flasks of increasing capacity (0.25–2.0 l) and 22-l laboratory bioreactors (stirred tank and airlift), where the enzyme production was sustainable. Furthermore, the fermentation time was reduced from 48 h in shake flasks to 32 h in bioreactors.     

Effect of the shear rate on pullulan production from beet molasses by Aureobasidium pullulans in an airlift reactor

The effect of the shear rate on pullulan production from beet molasses by Aureobasidium pullulans P56 in an airlift reactor was investigated. A maximum polysaccharide concentration (18.5 g/L), biomass dry weight (14.0 g/L), polysaccharide yield (38.5%), and sugar utilization (96%) was achieved at a shear rate of 42 s⁻¹. A. pullulans grown on beet molasses produced a mixture of pullulan and other polysaccharides. The highest value of pullulan proportion (30% of total polysaccharide) was obtained at a low shear rate (42 s⁻¹). The apparent viscosity of the fermentation broth increased as the shear rate increased up to 42 s⁻¹ and then decreased. On the other hand, the dissolved oxygen concentration and the volumetric mass transfer coefficient increased with the increase of the shear rate from 21 to 84 s⁻¹. The external addition of L-glutamic acid, olive oil, and Tween-80 improved significantly the production of crude polysaccharide (27.0 g/L), but the pullulan content of the polysaccharide was low (20%).     

PVA-Hydrogel Entrapped <Emphasis Type="Italic">Candida Guilliermondii</Emphasis> for Xylitol Production from Sugarcane Hemicellulose Hydrolysate

Viable cells of Candida guilliermondii were immobilized by inclusion into polyvinyl alcohol (PVA) hydrogel using the freezing–thawing method. Entrapment experiments were planned according to a 2³ full factorial design, using the PVA concentration (80, 100, and 120 g L⁻¹), the freezing temperature (−10, −15, and −20 °C), and the number of freezing-thawing cycles (one, three, and five) as the independent variables, integrated with three additional tests to estimate the errors. The effectiveness of the immobilization procedure was checked in Erlenmeyer flasks as the pellet capability to catalyze the xylose-to-xylitol bioconversion of a medium based on sugarcane bagasse hemicellulosic hydrolysate. To this purpose, the yield of xylitol on consumed xylose, xylitol volumetric productivity, and cell retention yield were selected as the response variables. Cell pellets were then used to perform the same bioconversion in a stirred tank reactor operated at 400 rpm, 30 °C, and 1.04 vvm air flowrate. At the end of fermentation, a maximum xylitol concentration of 28.7 g L⁻¹, a xylitol yield on consumed xylose of 0.49 g g⁻¹ and a xylitol volumetric productivity of 0.24 g L⁻¹ h⁻¹ were obtained.     

Kinetic and Stoichiometric Parameters in the Production of Carotenoids by <Emphasis Type="Italic">Sporidiobolus salmonicolor</Emphasis> (CBS 2636) in Synthetic and Agroindustrial Media

With the objective of determining the kinetic behavior (growth, substrate, pH, and carotenoid production) and obtain the stoichiometric parameters of the fermentative process by Sporidiobolus salmonicolor in synthetic and agroindustrial media, fermentations were carried out in shaken flasks at 25°C, 180 rpm, and initial pH of 4.0 for 120 h in the dark, sampling every 6 h. The maximum concentrations of total carotenoids in synthetic (913 μg/L) and agroindustrial (502 μg/L) media were attained approximately 100 h after the start of the fermentative process. Carotenoid bioproduction is associated with cell growth and the ratio between carotenoid production and cell growth (Y _P/X) is 176 and 163 μg/g in the synthetic and agroindustrial media, respectively. The pH of the agroindustrial fermentation medium varied from 4.2 to 8.5 during the fermentation. The specific growth rate (μ _X) for S. salmonicolor in synthetic and agroindustrial media was 0.07 and 0.04 h⁻¹, respectively. The synthetic medium allowed for greater productivity, obtaining maximum cell productivity (P _x) of 0.08 g L⁻¹ h⁻¹ and maximum total carotenoid productivity (P _car) of 14.2 μg L⁻¹ h⁻¹. Knowledge of the kinetics of a fermentative process is of extreme importance when transposing a laboratory experiment to an industrial scale, as well as making a quantitative comparison between different culture conditions.     

The Ethanol Tolerance of <Emphasis Type="Italic">Pachysolen tannophilus</Emphasis> in Fermentation on Xylose

The influence of ethanol on fermentation by Pachysolen tannophilus was studied. When xylose utilization rate was 80%, ethanol concentration began to decline. Fermentation of P. tannophilus was affected by ethanol addition in the beginning of fermentation; average xylose consumption rate was 0.065 g·l⁻¹·h⁻¹, and maximum specific growth rate was 0.07 h⁻¹ at 28 g·l⁻¹ ethanol, comparing with the average xylose consumption rate of 0.38 g·l⁻¹·h⁻¹ and maximum specific growth rate of 0.14 h⁻¹ in fermentation with no ethanol addition; P. tannophilus stopped growth at 40 g·l⁻¹ ethanol. When the initial ethanol concentration was 30 g·l⁻¹, the addition of glucose in xylose media made the growth of P. tannophilus better, and the most favorable glucose concentration was 15 g·l⁻¹ with the highest biomass of 1.51 g·l⁻¹ as compared with that of 0.95 g·l⁻¹ in pure xylose media.     

<Emphasis Type="Italic">Rhizopus stolonifer</Emphasis> LAU 07: a novel source of fructosyltransferase

Increasing awareness of the importance of fructooligosaccharides (FOS) as ingredients of functional foods has led to intensive search of new sources of fructosyltransferases (FTase), enzymes responsible for the conversion of sucrose to fructooligosaccharides. A local strain of Rhizopus stolonifer isolated from spoilt orange fruit with high fructosyltransferase activity (U _t) of 12.31–45.70 U mL⁻¹ during a fermentation period of 24–120 h is herein reported. It showed low hydrolytic activity (U _h) in the range of 0.86–1.78 U mL⁻¹ during the same period. FOS yield of 34 % (1-kestose, GF₂, nystose, GF₃) was produced by FTase obtained from a 72 h-old culture using 60 g of sucrose per 100 mL of the substrate. When the isolate was grown in a defined submerged medium, its pH dropped sharply from the intial value of 5.5 to 1.0 within 24 h, and this value was maintained throughout the fermentation. The biomass content ranged from 8.8 g L⁻¹ at 24 h of fermentation to reach the maximum of 10 g L⁻¹ at 72 h. It was reduced to 5.6 g L⁻¹ at the end of 120 h of fermentation. This report represents the first reference to a strain of Rhizopus as a source of FTase for the production of FOS. The high U _t/U _h ratio shown by this isolate indicates that it may be a good strain for the industrial and commercial production of FOS. However, there is a need of further optimization of the bioprocess to increase the conversion efficiency of sucrose to FOS by the enzyme.     

The Comparison of Lutein Production by <Emphasis Type="Italic">Scenesdesmus</Emphasis> sp. in the Autotrophic and the Mixotrophic Cultivation

The results of this study indicate that an increase in CO₂ percentage to 30% can enhance Scenedesmus sp. growth in autotrophic cultivation to a maximum of 0.85 g/l as compared with 0.6 g/l obtained in the batch with air (after 6 days of cultivation). However, while the CO₂ was higher than 30%, it showed a negative impact on cell growth. A mixotrophic cultivation with 3 g/l of glycerol can achieve 0.38 g l⁻¹ day⁻¹ of the maximum biomass productivity compared with that of 0.21 g l⁻¹ day⁻¹ in autotrophic cultivation. Nevertheless, the lutein content of the mixotrophic cultivation was 0.08–0.1% lower than 0.2–0.25% obtained in autotrophic cultivation, which led to a lower lutein productivity of 0.36 mg l⁻¹ day⁻¹ in the mixotrophic batch compared with 0.44 mg l⁻¹ day⁻¹ obtained in the autotrophic batch. The limitation of cell growth in the mixotrophic cultivation would be the contributing factor regarding the lower lutein productivity. The mixotrophic cultivation of repeated batch to remove potential inhibitive metabolic products from glycerol catabolism does not show an obvious improvement on biomass. Conclusively, mixotrophic cultivation achieves higher biomass productivity with lower lutein content than that of autotrophic cultivation, which leads to lower lutein productivity. Therefore, the autotrophic cultivation is preferred in the lutein production.     

Separation ofN-carbamoyl aspartate andl-dihydroorotate from serum by high-performance liquid chromatography with fluorimetric detection

Summary A high-performance liquid chromatographic method, with 9-anthryldiazomethane as derivatizing agent, has been developed for the simultaneous determination ofN-carbamoyl aspartate andl-dihydroorotate in serum. Sample preparation for 1 mL serum was by simple liquid-liquid extraction and then derivatization. The compounds were separated on a Luna C18(2) column by use of a gradient prepared from acetonitrile and 10 mM sodium acetate buffer, pH 6.0, and fluorimetric detection was performed at excitation and emission wavelengths of 365 nm and 412 nm, respectively. The response was found to be linearly dependent on concentration between 0.8 and 60 μg mL⁻¹ forl-dihydrooratate and between 0.9 and 90 μg mL⁻¹ forN-carbamoyl aspartate; the mean recovery rates were 50 and 51%, respectively. The limits of detection and quantification were 0.33 μg mL⁻¹ and 0.6 μg mL⁻¹, respectively, forl-dihydroorotate and 0.4 μg mL⁻¹ and 0.7 μg mL⁻¹ forN-carbamoyl aspartate. This method can be used to assess accumulation ofN-carbamoyl aspartate andl-dihydroorotate in body fluids in situations where cellular pyrimidine de novo synthesis is impaired.     

The electrochemical polymerization of <Emphasis Type="Italic">o</Emphasis>-phenylenediamine on <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine functionalized glassy carbon electrode and its application

The polymerization of o-phenylenediamine (OPD) on l-tyrosine (Tyr) functionalized glassy carbon electrode (GCE) and its electro-catalytic oxidation towards ascorbic acid (AA) had been studied in this report. l-Tyrosine was first covalently grafted on GCE surface via electrochemical oxidation, which was followed by the electrochemical polymerization of OPD on the l-tyrosine functionalized GCE. Then, the poly(o-phenylenediamine)/l-tyrosine composite film modified GCE (POPD-Tyr/GCE) was obtained. X-ray photo-electron spectroscopy (XPS), field emission scanning electron microscope (SEM), and electrochemical techniques have been used to characterize the grafting of l-tyrosine and the polymerization and morphology of OPD film on GCE surface. Due to the doping of the carboxylic functionalities in l-tyrosine molecules, the POPD film showed good redox activity in neutral medium, and thus, the POPD-Tyr/GCE exhibited excellent electrocatalytic response to AA in 0.1 mol l⁻¹ phosphate buffer solution (PBS, pH 6.8). The anode peak potential of AA shifted from 0.58 V at GCE to 0.35 V at POPD-Tyr/GCE with a greatly enhanced current response. A linear calibration graph was obtained over the AA concentration range of 2.5 × 10⁻⁴–1.5 × 10^–3 mol l⁻¹ with a correlation coefficient of 0.9998. The detection limit (3δ) for AA was 9.2 × 10⁻⁵ mol l⁻¹. The modified electrode showed good stability and reproducibility and had been used for the determination of AA content in vitamin C tablet with satisfactory results.     

Significantly Improved Expression and Biochemical Properties of Recombinant Serratia marcescens Lipase as Robust Biocatalyst for Kinetic Resolution of Chiral Ester

A lipase gene from Serratia marcescens ECU1010 was cloned into expression vector pET28a, sequenced, and overexpressed as an N terminus His-tag fusion protein in Escherichia coli. Through the optimization of culture conditions in shake flask, the lipase activity was improved up to 1.09 × 10⁵ U/l, which is a great improvement compared to our previous reports. It was purified to homogeneity by Ni-NTA affinity chromatography with an overall yield of 59.4% and a purification factor of 2.4-fold. This recombinant lipase displayed excellent stability below 30 °C and within the pH range of 5.0−6.8, giving temperature and pH optima at 40 °C and pH 9.0, respectively. The lipase activity was found to increase in the presence of metal ions such as Ca²⁺, Cu²⁺, and some nonionic surfactants such as PEG series. In addition, among p-nitrophenyl esters of fatty acids with varied chain length, the recombinant lipase showed the maximum activity on p-nitrophenyl laurate (C₁₂). Using racemic trans-3-(4′-methoxy-phenyl)-glycidyl methyl ester [(±)-MPGM] as substrate, which is a key chiral synthon for production of diltiazem, a 50% conversion yield was achieved after 4 h in toluene–water (100 mM KPB phosphate buffer, pH 7.5) biphasic system (5:5 ml) at 30 °C under shaking condition (160 rpm), affording (−)-MPGM in nearly 100% ee. The K _m and V _max values of the lipase for (±)-MPGM were 222 mM and 1.24 mmol min⁻¹ mg⁻¹, respectively. The above-mentioned features make the highly enantioselective lipase from Serratia marcescens ECU1010 a robust biocatalyst for practical use in large-scale production of diltiazem intermediate.     

Purification and partial characterization of a lipase from Bacillus coagulans ZJU318

An extracellular lipase was purified from the fermentation broth of Bacillus coagulans ZJU318 by CM-Sepharose chromatography, followed by Sephacryl S-200 chromatography. The lipase was purified 14.7-fold with 18% recovery and a specific activity of 141.1 U/mg. The molecular weight of the homogeneous enzyme was (32 kDa), determined by sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis. The enzyme activity was maximum at pH 9.0 and was stable over a pH range of 7.0–10.0, and the optimum temperature for the enzyme reaction was 45°C. Little activity loss (6.2%) was observed after 1 h of incubation at 40°C. However, the stability of the lipase decreased sharply at 50 and 60°C. The enzyme activity was strongly inhibited by Ag⁺ and Cu²⁺, whereas EDTA caused no inhibition. SDS, Brij 30, and Tween-80 inhibited lipase, whereas Triton X-100 did not significantly inhibit lipase activity.     

Citric acid production from raw glycerol by acetate mutants of Yarrowia lipolytica

Three acetate mutants of the yeast species Yarrowia lipolytica were screened using batch cultivation. The strain Y. lipolytica 1.31 was found to be the most suitable for citric acid production from raw glycerol, a by-product of biodiesel production from rapeseed oil. At the initial concentration of glycerol of 200 g dm⁻³, the citric acid production of 124.5 g dm⁻³, yield of 0.62 g g⁻¹, and productivity of 0.88 g dm⁻³ h⁻¹ were achieved. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

High-yield bacillus subtilis protease production by solid-state fermentation

A Bacillus subtilis isolate was shown to be able to produce extracellular protease in solid-state fermentations (SSF) using soy cake as culture medium. A significant effect of inoculum concentration and physiological age on protease production was observed. Maximum activities were obtained for inocula consisting of exponentially growing cells at inoculum concentrations in the range of 0.7–2.0 mg g⁻¹. A comparative study on the influence of cultivation temperature and initial medium pH on protease production in SSF and in submerged fermentation (SF) revealed that in SSF a broader pH range (5–10), but the same optimum temperature (37°C), is obtained when compared to SF. A kinetic study showed that enzyme production is associated with bacterial growth and that enzyme inactivation begins before biomass reaches a maximum level for both SF and SSF. Maximum protease activity and productivity were 960 U g⁻¹ and 15.4 U g⁻¹ h⁻¹ for SSF, and 12 U mL⁻¹ and 1.3 U mL⁻¹ h⁻¹ for SF. When SSF protease activity was expressed by volume of enzyme extract, the enzyme level was 10-fold higher and the enzyme productivity 45% higher than in SF. These results indicate that this bacterial strain shows a high biotechnological potential for protease production in solid-state fermentation.