Standard enthalpy of formation of platinum hydrous oxide

Standard enthalpies of formation of amorphous platinum hydrous oxide PtH_2.76O_3.89 (Adams' catalyst) and dehydrated oxide PtO_2.52 at T=298.15 K were determined to be -519.6±1.0 and -101.3 ±5.2 kJ mol^-1, respectively, by micro-combustion calorimetry. Standard enthalpy of formation of anhydrous PtO₂ was estimated to be -80 kJ mol^-1 based on the calorimetry. A meaningful linear relationship was found between the pseudo-atomization enthalpies of platinum oxides and the coordination number of oxygen surrounding platinum. This relationship indicates that the Pt-O bond dissociation energy is 246 kJ mol^-1 at T=298.15 K which is surprisingly independent of both the coordination number and the valence of platinum atom. This may provide an energetic reason why platinum hydrous oxide is non-stoichiometric. This revised version was published online in August 2006 with corrections to the Cover Date.     

Standard enthalpy of formation of lanthanum oxybritholites

Lanthanum-bearing silicate-oxyapatites or britholites, Ca_10–xLax(PO₄)_6–x(SiO₄)_xO with 1≤x≤6, have been synthesized by solid state reaction at high temperature. They were characterized by X-ray diffraction and IR spectroscopy. Using two microcalorimeters, the heat of solution of these compounds have been measured at 298 K in a solution of nitric and hydrofluoric acid. A strained least squares method was applied to the experimental results to obtain the solution enthalpies at infinite dilution, and the mixing enthalpy in two steps. In the first step the mixing enthalpy obtained is referenced to the britholite monosubstituted and to the oxysilicate. The mixing enthalpy referenced to the oxyapatite and to the oxysilicate is then extrapolated. In order to determine the enthalpies of formation of all the terms of the solution, thermochemical cycles were proposed and complementary experiments were performed. The results obtained show a decrease of the enthalpy of formation with the amount of Si and La introduced in the lattice. This was explained by the difference in the bond energies of (Ca–O, P–O) and (La–O, Si–O).     

The standard enthalpy of formation of silver pivalate

The standard enthalpy of combustion of crystalline silver pivalate, (CH₃)₃CC(O)OAg (AgPiv), was determined in an isoperibolic calorimeter with a self-sealing steel bomb, Δ_c H ⁰ (AgPiv, cr)= −2786.9±5.6 kJ mol⁻¹. The value of standard enthalpy of formation was derived for crystalline state: Δ_f H ⁰(AgPiv,cr)= −466.9±5.6 kJ mol⁻¹. Using the enthalpy of sublimation, measured earlier, the enthalpy of formation of gaseous dimer was obtained: Δ_f H ⁰(Ag₂Piv₂,g)= −787±14 kJ mol⁻¹. The enthalpy of reaction (CH₃)₃CC(O)OAg(cr)=Ag(cr)+(CH₃)₃CC(O)O^.(g) was estimated, Δ_r H ⁰=202 kJ mol⁻¹.     

Crystal structures and thermal decomposition kinetics of lanthanide complexes with 3,4,5-trimethoxybenzoic acid and 1,10-phenanthroline

A series of lanthanide complexes with the 3,4,5-trimethoxybenzoic acid(3,4,5-tmoba) and 1,10-phenanthroline(phen),[Ln(3,4,5-tmoba) 3 phen] 2(Ln = Pr(1),Nd(2) and Ho(3)),have been synthesized and characterized by a series of techniques including elemental analysis,IR spectra,X-ray crystallography and TG/DSC-FTIR technology.The three complexes have two kinds of coordination modes,in which the Pr 3+ and Nd 3+ cations are nine-coordinated and the Ho 3+ cation is eight-coordinated.The three-dimensional IR accumulation spectra of gaseous products for complexes 1-3 were analyzed and the gaseous products were identified by the typical IR spectra obtained from the 3D surface graphs.Meanwhile,we obtained the activation energy E of the first steps of complexes 1-3 by the integral isoconversional non-linear(NL-INT) method and discussed the non-isothermal kinetics of complexes 1-3 using the Malek method.Finally,SB(m,n) was defined as the kinetic method of the first-step thermal decomposition.The thermodynamic parameters △G≠,△H≠ and △S≠ of activation at the peak temperature were also calculated.     

Thermodynamics of Silicon Nitride. Standard molar enthalpy of formation of amorphous Si3N4 at 298.15 K

The standard molar enthalpy of formation Δ_f H _m ⁰=–760±12 kJ for amorphous silicon nitride a-Si₃N₄ has been determined from fluorine combustion calorimetry measurements of the massic energy of the reaction: a-Si₃N₄(s)+6F₂(g)=3SiF₄(g)+2N₂(g). This value combined with Δ_f H _m ⁰= –828.9±3.4 kJ for a-Si₃N₄ indicates that determined for the first time molar enthalpy change for the transition from amorphous to α-crystalline form Δ_trs H _m ⁰=69±13 kJ is very evident, in spite of its large uncertainty range resulting from impurity corrections. This revised version was published online in July 2006 with corrections to the Cover Date.     

Low-temperature heat capacities and standard molar enthalpy of formation of aspirin

Molar heat capacities (C _p,m) of aspirin were precisely measured with a small sample precision automated adiabatic calorimeter over the temperature range from 78 to 383 K. No phase transition was observed in this temperature region. The polynomial function of C _p,m vs. T was established in the light of the low-temperature heat capacity measurements and least square fitting method. The corresponding function is as follows: for 78 K≤T≤383 K, C _p,m/J mol^-1 K^-1=19.086X ⁴+15.951X ³-5.2548X ²+90.192X+176.65, [X=(T-230.50/152.5)]. The thermodynamic functions on the base of the reference temperature of 298.15 K, {ΔH _T -ΔH _298.15} and {S _T-S _298.15}, were derived. Combustion energy of aspirin (Δ_c U _m) was determined by static bomb combustion calorimeter. Enthalpy of combustion (Δ_c H ^o _m) and enthalpy of formation (Δ_f H ^o _m) were derived through Δ_c U _m as - (3945.26±2.63) kJ mol^-1 and - (736.41±1.30) kJ mol^-1, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Molar heat capacities and standard molar enthalpy of formation of 2-amino-5-methylpyridine

The heat capacities (C _p,m) of 2-amino-5-methylpyridine (AMP) were measured by a precision automated adiabatic calorimeter over the temperature range from 80 to 398 K. A solid-liquid phase transition was found in the range from 336 to 351 K with the peak heat capacity at 350.426 K. The melting temperature (T _m), the molar enthalpy (Δ_fus H _m⁰), and the molar entropy (Δ_fus S _m⁰) of fusion were determined to be 350.431±0.018 K, 18.108 kJ mol⁻¹ and 51.676 J K⁻¹ mol⁻¹, respectively. The mole fraction purity of the sample used was determined to be 0.99734 through the Van’t Hoff equation. The thermodynamic functions (H _T-H _298.15 and S _T-S _298.15) were calculated. The molar energy of combustion and the standard molar enthalpy of combustion were determined, ΔU _c(C₆H₈N₂,cr)= −3500.15±1.51 kJ mol⁻¹ and Δ_c H _m⁰ (C₆H₈N₂,cr)= −3502.64±1.51 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. The standard molar enthalpy of formation of the crystalline compound was derived, Δ_r H _m⁰ (C₆H₈N₂,cr)= −1.74±0.57 kJ mol⁻¹.     

烟酸的低温热容和标准摩尔生成焓

利用精密自动绝热热量计测量了分析纯烟酸在78～400 K温区的低温热容. 用最小二乘法将实验摩尔热容对温度进行拟合, 得到了热容随温度变化的多项式方程. 用此方程进行数值积分, 得到在此温区每隔5 K的舒平热容值和相对于298.15 K时的热力学函数值. 利用精密静止氧弹燃烧热量计测定了烟酸在298.15 K时的恒体积燃烧能为 Δ_cU＝ －(24528.3±16.1) J•g^－1. 依据物质燃烧焓定义计算出烟酸的标准摩尔燃烧焓为: Δ_cH_m^o＝－(3019.05±1.98) kJ•mol^－1. 最后, 依据Hess定律计算出烟酸的标准摩尔生成焓为: Δ_fH_m^o＝－(56.76±2.13) kJ•mol^－1.     

L-苏糖酸铜的制备及其标准生成焓

L 苏糖酸作为金属离子的载体,可使金属离子易与氨基酸或蛋白质结合而被动物吸收和利用[1]。本文以L 苏糖酸与Cu2(OH)2CO3·xH2O反应后的溶液浓缩加无水甲醇制得水合物Cu(C4H6O5)·0 5H2O(经HPLC分析,纯度>99 9%),用化学分析、元素分析、IR光谱、TD DTG和量热法进行了表征。1　实验部分1 1　试剂与仪器L 抗坏血酸(Vc)、B.R.(东北制药总厂);H2O2、CaCO3、H2C2O4和Cu2(OH)2CO3·xH2O均为A.R.(西安化学试剂厂);2400型元素分析仪(PE公司);Cu2+含量用Na2S2O3滴定法测定;TG 7型热重分析仪(PE公司);BRUKEREQUINOX 5…     

氯化烷基咪唑系列离子液体标准摩尔燃烧焓和生成焓

用精密氧弹热量计测定了4种离子液体: 氯化1-甲基-3-乙基咪唑(C2MIC), 氯化1-甲基-3-丁基咪唑(C4MIC), 氯化1-甲基-3-戊基咪唑(C5MIC)和氯化1-甲基-3-己基咪唑(C6MIC)的燃烧热, 计算了它们的标准摩尔燃烧焓 和标准摩尔生成焓 , 结合文献中的标准摩尔溶解焓, 估算了烷基咪唑阳离子在水溶液中的标准摩尔生成焓, 以及亚甲基对标准摩尔燃烧焓和标准摩尔生成焓的贡献.     

Thermochemical studies for determination of the molar enthalpy of formation of aniline derivatives

The standard (p ^o=0.1 MPa) molar enthalpies of combustion atT=298.15 K were measured by static bomb combustion calorimetry for liquidN,N-diethylaniline,N,N-dimethyl-m-toluidine,N,N-dimethyl-p-toluidine, andN-ethyl-m-toluidine. Vaporization enthalpies forN,N-dimethyl-m-toluidine andN-ethyl-m-toluidine were determined by correlation gas chromatography. Derived standard molar values of _f H _m ^o (g) at 298.15 K forN,N-diethylaniline (62.1±7.6);N,N-dimethyl-m-toluidine (72.6±7.3),N,N-dimentyl-p-toluidine (68.9±7.4),N-ethyl-m-toluidine (30.5±3.8 kJ· mol^–1) were obtained.     

Standard molar enthalpies of formation and sublimation of <Emphasis Type="Italic">N</Emphasis>-phenylphthalimide

The standard (p ⁰=0.1 MPa) molar enthalpy of formation, Δ_f H ⁰ _m, for crystalline N-phenylphthalimide was derived from its standard molar enthalpy of combustion, in oxygen, at the temperature 298.15 K, measured by static bomb-combustion calorimetry, as –206.0±3.4 kJ mol^–1. The standard molar enthalpy of sublimation, Δ^g _cr H ⁰ _m , at T=298.15 K, was derived, from high temperature Calvet microcalorimetry, as 121.3±1.0 kJ mol^–1. The derived standard molar enthalpy of formation, in the gaseous state, is analysed in terms of enthalpic increments and interpreted in terms of molecular structure.     

2-氨基-4, 6-二甲基嘧啶与锌盐配合物的制备及生成焓测定

Thepyrimidinesasaclassareknowntopossessextraordinarybiologicalpropertiesthataregenerallydistinguishedqualitativelybytheirapplicationsinpesticide,herbicide,bactericide,andmedicineinter-mediates犤1犦.Asurveyoftheseapplicationsandanum-beroftherelatedvariationsthataredevelopedrecent-ly,suchastheextraordinaryeffectiveherbicideofsulfonylsulfourea,revealsthebroadbiologicalimpor-tancejustbecauseofthewideoccurrenceofpyrimi-dinesringsystemsinthesemolecules犤2犦.Ithasbeenshownthatthemedicineintermediates…     

Preparation,Characterization and Standard enthalpy of formation of Sr2CeO4.

Sr₂CeO₄ has been prepared by sol-combustion and co-precipitate routes and the resulting products have been characterized by XRD analysis. The molar enthalpies of solution of Sr₂CeO₄(s), Sr(NO₃)₂(s) and Ce(NO₃)₃·6H₂O(s) in 0.150 dm^–3 of (4.41 mol dm–3 H₂O₂+4.23 mol dm^–3 of HNO₃) solvent as well as the molar enthalpies of solution of Sr₂CeO₄(s), SrCl₂(s) and CeCl₃(s) in 0.150 dm³ of (1.47 mol dm^–3 H₂O₂+3.05 mol dm^–3 of HClO₄) solvent have been measured using an isoperibol type calorimeter. From these results and other auxiliary data, the standard molar enthalpy of formation of Sr₂CeO₄ has been derived to be –2277.3±3.1 kJ mol^–1 at 298.15 K. This is the first reported thermodynamic data on this compound.     

Standard Enthalpies of Formation for Some Semi-products At the Synthesis of Poly(ethylene) Terephthalate

The enthalpies of combustion for 4-formylbenzoic acid (I), 4-methylbenzyl alcohol (II), and trimethyl 1,2,4-benzenetricarboxylate (III) were determined by the bomb calorimetry method. Enthalpies of sublimation for I and II were measured with a calorimeter. The contributions of different substituents to the standard enthalpies of formation for benzene derivatives in the gas state were derived. This revised version was published online in July 2006 with corrections to the Cover Date.     

Micro-combustion Calorimetry Aiming At 1 mg Samples

A micro-combustion calorimeter was developed. The small energy equivalent (ca. 68 JK_–1) of this calorimeter makes it possible to measure combustion energies of very small samples. The energy equivalent was determined by burning 2 mg of benzoic acid. The standard deviation of the mean energy equivalent was reduced to 0.014% in 5 experiments. The standard massic energy of combustion of salicylic acid and the standard deviation of the mean were determined to be –21871±5 J g_–1, which agrees well with the literature values. The standard molar enthalpy of formation of salicylic acid was derived as –591.2±1.7 kJ mol_–1.This revised version was published online in November 2005 with corrections to the Cover Date.     

The Gaussian G4 enthalpy of formation of propargylamine and propargyloxy derivatives of triazido-s-triazine

Enthalpies of formation in gas phase of three series of energetic derivatives of triazido-s-triazine containing propynyloxy, propynylamine and methylpropynylamine groups were calculated using G4 method. Contributions of each group to the enthalpy of formation of the discussed compounds were estimated in order to apply the increment method for quick estimation of this thermodynamic parameter for substituted s-triazines.     

5-氨基间苯二甲酸钠和5-羟基间苯二甲酸钠的热力学性质

在水溶液中合成了5-氨基间苯二甲酸钠(1)和5-羟基间苯二甲酸钠(2)固态样品,元素分析和TG-DTG确定其组成符合C8H5O4NNa2·H2O(1)和C8H4O5Na2·H2O(2).用精密自动绝热热量计测定了它们在78～400K温区的低温热容,将实验值用最小二乘法拟合,得到热容随温度变化的多项式方程,用此方程进行数值积分,得到该温区内每隔5K的舒平热容值和各种热力学函数值.用RD496-2000型微热量计测定了样品在298.15K时的标准摩尔溶解焓分别为ΔsolHmθ(1,s)=-44.552±0.164kJmol-1和θΔsolHm(2,s)=-36.055±0.154kJmol-1,计算了其水合阴离子标准摩尔生成焓分别为θΔfHm(C8H5O4N2-,aq)=-684.56±1.67kJmol-1和ΔfHmθ(C8H4O52-,aq)=-1263.43±2.13kJmol-1.用RBC-II型精密转动弹热量计测定了样品的恒容燃烧热分别为ΔcU(1,s)=-13382.14±5.28Jg-1和ΔcU(2,s)=-10339.15±4.15Jg-1,计算了它们的标准摩尔燃烧焓和标准摩尔生成焓分别为ΔcHmθ(1,s)=-3252.90±1.28kJmol-1和θΔcHm(2,s)=-2522.64±1.01kJmol-1,ΔfHmθ(1,s)=-1406.46±1.66kJmol-1,θΔfHm(2,s)=-1993.79±1.46kJmol-1.     

Synthesis and enthalpy of formation of SrB4O7·3H2O

Hydrated strontium borate, SrB₄O₇·3H₂O, has been synthesized and characterized by XRD, FT-IR, DTA-TG and chemical analysis. The molar enthalpy of solution of SrB₄O₇·3H₂O in 1 mol dm⁻³ HCl(aq) was measured to be (21.15 ± 0.29) kJ mol⁻¹. With incorporation of the previously determined enthalpies of solution of Sr(OH)₂·8H₂O(s) in [HCl(aq) + H₃BO₃(aq)] and H₃BO₃ in HCl(aq), and the enthalpies of formation of H₂O(l), Sr(OH)₂·8H₂O(s) and H₃BO₃(s), the enthalpy of formation of SrB₄O₇·3H₂O was found to be −(4286.7 ± 3.3) kJ mol⁻¹.