2,6-Mes(2)C(6)H(3)](2)Ga(+)Li[Al(OCH(CF(3))(2))(4)](2)(-) (Mes = 2,4,6-Me(3)C(6)H(2)): A compound containing a linear unsolvated two-coordinate gallium cation

The title compound [2,6-Mes(2)C(2)H(3)](2)Ga(+)Li[Al(OCH(CF(3))(2))(4)](2)(-), 1, containing a linear two-coordinate gallium cation, has been obtained by metathesis reaction of [2,6-Mes(2)C(2)H(3)](2)GaCl with 2 equiv of Li[Al(OCH(CF(3))(2))(4)] in C(6)H(5)Cl solution at room temperature. Compound 1 has been characterized by (1)H, (13)C((1)H), (19)F, and (27)Al NMR spectroscopy and X-ray crystallography. Compound 1 consists of isolated [2,6-Mes(2)C(6)H(3)](2)Ga(+) cations and Li[Al(OCH(CF(3))(2))(4)](2)(-) anions. The C-Ga-C angle is 175.69(7) degrees, and the Ga-C distances are 1.9130(14) and 1.9145(16) A. The title compound is remarkably stable, is only a weak Lewis acid, and polymerizes cyclohexene oxide.     

Studies of the kinetics and thermochemistry of the forward and reverse reaction Cl + C6H6 = HCl + C6H5

The laser flash photolysis resonance fluorescence technique was used to monitor atomic Cl kinetics. Loss of Cl following photolysis of CCl4 and NaCl was used to determine k(Cl + C6H6) = 6.4 x 10(-12) exp(-18.1 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 578-922 K and k(Cl + C6D6) = 6.2 x 10(-12) exp(-22.8 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 635-922 K. Inclusion of literature data at room temperature leads to a recommendation of k(Cl + C6H6) = 6.1 x 10(-11) exp(-31.6 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) for 296-922 K. Monitoring growth of Cl during the reaction of phenyl with HCl led to k(C6H5 + HCl) = 1.14 x 10(-12) exp(+5.2 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 294-748 K, k(C6H5 + DCl) = 7.7 x 10(-13) exp(+4.9 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 292-546 K, an approximate k(C6H5 + C6H5I) = 2 x 10(-11) cm(3) molecule(-1) s(-1) over 300-750 K, and an upper limit k(Cl + C6H5I) < or = 5.3 x 10(-12) exp(+2.8 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 300-750 K. Confidence limits are discussed in the text. Third-law analysis of the equilibrium constant yields the bond dissociation enthalpy D(298)(C6H5-H) = 472.1 +/- 2.5 kJ mol(-1) and thus the enthalpy of formation Delta(f)H(298)(C6H5) = 337.0 +/- 2.5 kJ mol(-1).     

Energetics of the N-O bonds in 2-hydroxyphenazine-di-N-oxide

The standard enthalpy of formation and the enthalpy of sublimation of crystalline 2-hydroxyphenazine-di-N-oxide, at T = 298.15 K, were determined from isoperibol static bomb combustion calorimetry and from Knudsen effusion experiments, as -76.7 +/- 4.2 kJ.mol(-1) and 197 +/- 5 kJ.mol(-1), respectively. The sum of these two quantities gives the standard enthalpy of formation in the gas-phase for this compound, delta(f)H(m)degrees(g) = 120 +/- 6 kJ.mol(-1). This value was combined with the gas-phase standard enthalpy of formation for 2-hydroxyphenazine retrieved from a group estimative method yielding the mean (N-O) bond dissociation enthalpy, in the gas-phase, for 2-hydroxyphenazine-di-N-oxide. The result obtained with this strategy is (DH(m)degrees (N - O)) = 263 +/- 4 kJ.mol(-1), which is in excellent agreement with the B3LYP/6-311+G(2d,2p)//B3LYP/6-31G(d) computed value, 265 kJ.mol(-1).     

Experimental and computational thermochemical study of 2-thiobarbituric acid: structure-energy relationship

This paper reports an experimental and computational thermochemical study on 2-thiobarbituric acid (2-thioxodihydropyrimidine-4,6(1H,5H)-dione), [CAS 504-17-6]. The value of the standard (p(0) = 0.1 MPa) molar enthalpy of formation in the gas phase at T = 298.15 K has been determined. The energy of combustion was measured by bomb combustion calorimetry, using a rotatory bomb, and from the result obtained, the standard molar enthalpy of formation in the crystalline state at T = 298.15 K was calculated as -(396.8 ± 0.9) kJ·mol(-1). The enthalpy of sublimation was determined using a transference (transpiration) method in a saturated N(2) stream and a value of the enthalpy of sublimation at T = 298.15 K was derived as (118.3 ± 2.2) kJ·mol(-1). From these results a value of -(278.5 ± 2.4) kJ·mol(-1) for the gas-phase enthalpy of formation at T = 298.15 K was determined. Theoretical calculations at the G3 and G4 levels were performed, and a study of the molecular and electronic structure of the compound has been carried out. Calculated enthalpies of formation are in very good agreement with the experimental value.     

The dimerization of SnCl2(g): mass spectrometric and theoretical studies

The vaporization of SnCl2(s) was investigated in the temperature range between 382 and 504 K by the use of Knudsen effusion mass spectrometry. The Sn+, SnCl+, SnCl2+, Sn2Cl3+, and Sn2Cl4+ ions were detected in the mass spectrum of the equilibrium vapor. The SnCl2(g) and Sn2Cl4(g) gaseous species were identified, and their partial pressures were determined. The structure and vibrational properties of both species and corresponding fragmentation products were studied applying density functional theory and second-order M?ller-Plesset perturbation theoretical approaches. Molecular parameters yielded thermodynamic functions by the use of statistical thermodynamics. The sublimation enthalpies of SnCl2(g) and Sn2Cl4(g) at 298 K resulting from the second- and third-law methods are evaluated as 130.9 +/- 6.2 kJ mol(-1) and 155.8 +/- 7.3 kJ mol(-1), respectively. The enthalpy changes of the dissociation reactions Sn2Cl4(g) = 2 SnCl2(g) were obtained as delta(d)H degrees(298) = 106.8 +/- 6.2 kJ mol(-1). The corresponding theoretical value amounts to 103.4 kJ mol(-1). The change of monomer properties due to the dimerization reaction is also discussed.     

Synthesis and characterization of pentachlorophenyl-metal derivatives with d0 and d10 electron configurations

By reaction of [TiCl(3)(thf)(3)] with LiC(6)Cl(5), the homoleptic organotitanium(III) derivative [Li(thf)(4)][Ti(III)(C(6)Cl(5))(4)] (1) has been prepared as a paramagnetic (d(1), S = 1/2, g(av) = 1.959(2)), extremely air-sensitive compound. Oxidation of 1 with [N(C(6)H(4)Br-4)(3)][SbCl(6)] gives the diamagnetic (d(0)) organotitanium(IV) species [Ti(IV)(C(6)Cl(5))(4)] (2). Compounds 1 and 2 are also electrochemically related (E(1/2) = 0.05 V). The homoleptic, diamagnetic (d(10)) compounds [N(PPh(3))(2)][Tl(C(6)Cl(5))(4)] (3) and [Sn(C(6)Cl(5))(4)] (4) have also been prepared. Nearly tetrahedral environments have been found for the d(0), d(10), and d(1) metal centers in the molecular structures of compounds 2-4 as well as in that of [Li(thf)(2)(OEt(2))(2)][Ti(III)(C(6)Cl(5))(4)].CH(2)Cl(2) (1') (X-ray diffraction). The reaction of the heavier Group 4 metal halides, MCl(4) (M = Zr, Hf) with LiC(6)Cl(5) in the presence of [NBu(4)]Br gives, in turn, the heteroleptic species [NBu(4)][M(C(6)Cl(5))(3)Cl(2)] (M = Zr (5), Hf (6)). Compounds 5 and 6 are isomorphous and isostructural, with the metal center in a trigonal-bipyramidal (TBPY-5) environment defined by two axial Cl ligands and three equatorial C(6)Cl(5) groups (X-ray diffraction). No redox features are observed for compounds 3-6 in CH(2)Cl(2) solution between -1.6 and +1.6 V.     

Energetics of C-Cl, C-Br, and C-I bonds in haloacetic acids: enthalpies of formation of XCH2COOH (X=CI, Br, I) compounds and the carboxymethyl radical

The standard molar enthalpies of formation of chloro-, bromo-, and iodoacetic acids in the crystalline state, at 298.15 K, were determined as deltafH(o)m(C2H3O2Cl, cr alpha)=-(509.74+/- 0.49) kJ x mol(-1), deltafH(o)m(C2H3O2Br, cr I)-(466.98 +/- 1.08) kJ x mol(-1), and deltafH(o)m (C2H3O2I, cr)=-(415.44 +/- 1.53) kJ x mol(-1), respectively, by rotating-bomb combustion calorimetry. Vapor pressure versus temperature measurements by the Knudsen effusion method led to deltasubH(o)m(C2H3O2Cl)=(82.19 +/- 0.92) kJ x mol(-1), deltasubH(o)m(C2H3O2Br)=(83.50 +/- 2.95) kJ x mol(-1), and deltasubH(o)m-(C2H3O2I) = (86.47 +/- 1.02) kJ x mol(-1), at 298.15 K. From the obtained deltafH(o)m(cr) and deltasubH(o)m values it was possible to derive deltafH(o)m(C2H3O2Cl, g)=-(427.55 +/- 1.04) kJ x mol(-1), deltafH(o)m (C2H3O2Br, g)=-(383.48 +/- 3.14) kJ x mol(-1), and deltafH(o)m(C2H3O2I, g)=-(328.97 +/- 1.84) kJ x mol(-1). These data, taken with a published value of the enthalpy of formation of acetic acid, and the enthalpy of formation of the carboxymethyl radical, deltafH(o)m(CH2COOH, g)=-(238 +/- 2) kJ x mol(-1), obtained from density functional theory calculations, led to DHo(H-CH2COOH)=(412.8 +/- 3.2) kJ x mol(-1), DHo(Cl-CH2COOH)=(310.9 +/- 2.2) kJ x mol(-1), DHo(Br-CH2COOH)=(257.4 +/- 3.7) kJ x mol(-1), and DHo(I-CH2COOH)=(197.8 +/- 2.7) kJ x mol(-1). A discussion of the C-X bonding energetics in XCH2COOH, CH3X, C2H5X, C2H3X, and C6H5X (X=H, Cl, Br, I) compounds is presented.     

Molecular nitrides containing group 4 and 5 metals: single and double azatitanocubanes

Treatment of [[Ti(eta(5)-C(5)Me(5))(micro-NH)](3)(micro(3)-N)] (1) with the imido complexes [Ti(NAr)Cl(2)(py)(3)] (Ar=2,4,6-C(6)H(2)Me(3)) and [Ti(NtBu)Cl(2)(py)(3)] in toluene affords the single azatitanocubanes [[Cl(2)(ArN)Ti]( micro(3)-NH)(3)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]].(C(7)H(8)) (2.C(7)H(8)) and [[Cl(2)Ti](micro(3)-N)(2)(micro(3)-NH)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]] (3), respectively. Similar reactions of complex 1 with the niobium and tantalum imido derivatives [[M(NtBu)(NHtBu)Cl(2)(NH(2)tBu)](2)] (M=Nb, Ta) in toluene give the single azaheterometallocubanes [[Cl(2)(tBuN)M](micro(3)-N)(micro(3)-NH)(2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]] (M=Nb (4), Ta (5)), both complexes react with 2,4,6-trimethylaniline to yield the analogous species [[Cl(2)(ArN)M](micro(3)-N)(micro(3)-NH)(2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]].(C(7)H(8)) (Ar=2,4,6-C(6)H(2)Me(3), M=Nb (6.C(7)H(8)), Ta (7.C(7)H(8))). Also the azaheterodicubanes [M[micro(3)-N)(2)(micro(3)-NH)](2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)](2)].2C(7)H(8) [M=Ti (8.2C(7)H(8)), Zr (9.2C(7)H(8))], and [M[(micro(3)-N)(5)(micro(3)-NH)][Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)](2)].2 C(7)H(8) (Nb (10.2C(7)H(8)), Ta (11.2C(7)H(8))) were prepared from 1 and the homoleptic dimethylamido complex [M(NMe(2))(x)] (x=4, M=Ti, Zr; x=5, M=Nb, Ta) in toluene at 150 degrees C. X-ray crystal structure determinations were performed for 6 and 10, which revealed a cube- and double-cube-type core, respectively. For complexes 2 and 4-7 we observed and studied by DNMR a rotation or trigonal-twist of the organometallic ligands [[Ti(eta(5)-C(5)Me(5))(micro-NH)](3)(micro(3)-N)] (1) and [(micro(3)-N)(micro(3)-NH)(2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]](1-). Density functional theory calculations were carried out on model complexes of 2, 3, and 8 to establish and understand their structures.     

Singly-bonded fullerene dimers: neutral (C(60)Cl(5))(2) and cationic (C(70))(2)(2+)

C(60)Br(24) and C(70)Br(10) react with TiCl(4), splitting out bromine, and, after Br/Cl exchange, forming singly-bonded dimeric structures (C(60)Cl(5))(2) and [(C(70))(2)](Ti(3)Cl(13))(2), respectively, the latter consisting of dimeric [(C(70))(2)](2+) dications and (Ti(3)Cl(13))(-) anions.     

Pore with gate: enhancement of the isosteric heat of adsorption of dihydrogen via postsynthetic cation exchange in metal-organic frameworks

Three isostructural anionic frameworks {[(Hdma)(H(3)O)][In(2)(L(1))(2)]·4DMF·5H(2)O}(∞) (NOTT-206-solv), {[H(2)ppz][In(2)(L(2))(2)]·3.5DMF·5H(2)O}(∞) (NOTT-200-solv), and {[H(2)ppz][In(2)(L(3))(2)]·4DMF·5.5H(2)O}(∞) (NOTT-208-solv) (dma = dimethylamine; ppz = piperazine) each featuring organic countercations that selectively block the channels and act as pore gates have been prepared. The organic cations within the as-synthesized frameworks can be replaced by Li(+) ions to yield the corresponding Li(+)-containing frameworks {Li(1.2)(H(3)O)(0.8)[In(2)(L(1))(2)]·14H(2)O}(∞) (NOTT-207-solv), {Li(1.5)(H(3)O)(0.5)[In(2)(L(2))(2)]·11H(2)O}(∞) (NOTT-201-solv), and {Li(1.4)(H(3)O)(0.6)[In(2)(L(3))(2)]·4acetone·11H(2)O}(∞) (NOTT-209-solv) in which the pores are now unblocked. The desolvated framework materials NOTT-200a, NOTT-206a, and NOTT-208a display nonporous, hysteretic and reversible N(2) uptakes, respectively, while NOTT-206a and NOTT-200a provide a strong kinetic trap showing adsorption/desorption hysteresis with H(2). Single crystal X-ray analysis confirms that the Li(+) ions are either tetrahedrally (in NOTT-201-solv and NOTT-209-solv) or octahedrally (in NOTT-207-solv) coordinated by carboxylate oxygen atoms and/or water molecules. This is supported by (7)Li solid-state NMR spectroscopy. NOTT-209a, compared with NOTT-208a, shows a 31% enhancement in H(2) storage capacity coupled to a 38% increase in the isosteric heat of adsorption to 12 kJ/mol at zero coverage. Thus, by modulating the pore environment via postsynthetic cation exchange, the gas adsorption properties of the resultant MOF can be fine-tuned. This affords a methodology for the development of high capacity storage materials that may operate at more ambient temperatures.     

High-enthalpy hydrogen adsorption in cation-exchanged variants of the microporous metal-organic framework Mn3[(Mn4Cl)3(BTT)8(CH3OH)10]2

Exchange of the guest Mn2+ ions in Mn3[(Mn4Cl)3(BTT)8(CH3OH)10]2 (1-Mn2+; BTT=1,3,5-benzenetristetrazolate) with selected cations results in the formation of isostructural framework compounds 1-M (M=Li+, Cu+, Fe2+, Co2+, Ni2+, Cu2+, Zn2+). Similar to the parent compound, the new microporous materials are stable to desolvation and exhibit a high H2 storage capacity, ranging from 2.00 to 2.29 wt % at 77 K and 900 torr. Measurements of the isosteric heat of adsorption at zero coverage reveal a difference of 2 kJ/mol between the weakest and strongest H2-binding materials, which is attributed to variations in the strength of interaction between H2 molecules and unsaturated metal centers within each framework. The Co2+-exchanged compound, 1-Co2+, exhibits an initial enthalpy of adsorption of 10.5 kJ/mol, the highest yet observed for a microporous metal-organic framework.     

Kinetic analysis of one-step solid-state reaction for Li4Ti5O12/C

The kinetics of one-step solid-state reaction of Li(4)Ti(5)O(12)/C in a dynamic nitrogen atmosphere was first studied by means of thermogravimetric-differential thermal analysis technique at five different heating rates. According to the double equal-double steps method, the Li(4)Ti(5)O(12)/C solid-state reaction mechanism could be properly described as the Jander equation, which was a three-dimensional diffusion with spherical symmetry, and the reaction mechanism functions were listed as follows: f(α) = (3)/(2)(1 - α)(2/3)[1 - (1 - α)(1/3)](-1), G(α) = [1 - (1 - α)(1/3)](2). In FWO method, average activation energy, frequency factor, and reaction order were 284.40 kJ mol(-1), 2.51 × 10(18) min(-1), and 1.01, respectively. However, the corresponding values in FRL method were 271.70 kJ mol(-1), 1.00 × 10(17) min(-1), and 0.96, respectively. Moreover, the values of enthalpy of activation, Gibbs free energy of activation, and entropy of activation at the peak temperature were 272.06 kJ mol(-1), 240.16 kJ mol(-1), and 44.24 J mol(-1) K(-1), respectively.     

稀土高氯酸盐-甘氨酸配合物[Sm2(Gly)6(H2O)4](ClO4)6·5H2O单晶 体的低温热 容及标准生成焓

合成了稀土高氯酸盐-甘氨酸配合物晶体。经热重、差热、化学化析及有关文献对比,确定其组成是[Sm2(Gly)6(H2O)4](ClO4)6·5H2O,单晶结构,纯度是99.0%.熔点分析仪分析知其没有固定熔点,在79～370K温区,用高精密全自动绝热量仪对单晶配合物进行了热容测定,发现该配合物在低温段没有反常热容。348.07K附近是该配合物的分解温区,配合物的分解温度、分解熵和分解焓分别是346.89K,44.669kJ/mol和128.77J/K·mol。计算机拟合了热容对温度的多项式方程,在79～318K温区,Cp=1294.56+624.17K-11.893X^2+75.075X^3+23.762X^4.在常压,298.15K下用具有恒温环境的反应热量计测定了配合物的标准生成焓值为-8022.405kJ/mol。     

Energy-resolved photoionization of alkylperoxy radicals and the stability of their cations

The photoionization of alkylperoxy radicals has been investigated using a newly developed experimental apparatus that combines the tunability of the vacuum ultraviolet radiation of the Advanced Light Source at Lawrence Berkeley National Laboratory with time-resolved mass spectrometry. Methylperoxy (CH(3)OO) and ethylperoxy (C(2)H(5)OO) radicals are produced by the reaction of pulsed, photolytically produced alkyl radicals with molecular oxygen, and the mass spectrum of the reacting mixture is monitored in time by using synchrotron-photoionization with a double-focusing mass spectrometer. The kinetics of product formation is used to confirm the origins and assignments of ionized species. The photoionization efficiency curve for CH(3)OO has been measured, and an adiabatic ionization energy of (10.33 +/- 0.05) eV was determined with the aid of Franck-Condon spectral simulations, including ionization to the lowest triplet and singlet cation states. Using the appearance energy of CH(3)(+) from CH(3)OO, an enthalpy of formation for CH(3)OO of Delta(f) (CH(3)OO) = (22.4 +/- 5) kJ mol(-1) is derived. The enthalpy of formation of CH(3)OO(+) is derived as Delta(f) = (1019 +/- 7) kJ mol(-1) and the CH(3)(+)-OO bond energy as (CH(3)(+) - O(2)) = (80 +/- 7) kJ mol(-1). The C(2)H(5)OO(+) signal is not detectable; however, the time profile of the ethyl cation signal suggests its formation from dissociative ionization of C(2)H(5)OO. Electronic structure calculations suggest that hyperconjugation reduces the stability of the ethylperoxy cation, making the C(2)H(5)OO(+) ground state only slightly bound with respect to the ground-state products, C(2)H(5)(+) and O(2). The value of the measured appearance energy of C(2)H(5)(+) is consistent with dissociative ionization of C(2)H(5)OO via the Franck-Condon favored ionization to the ? (1)A' state of C(2)H(5)OO(+).     

Experimental and molecular dynamics simulation study of the sublimation energetics of cyclopentadienyltricarbonylmanganese (Cymantrene)

The standard molar enthalpy of sublimation of monoclinic cyclopentadienyltricarbonylmanganese, Mn(eta (5)-C 5H 5)(CO) 3, at 298.15 K, was determined as Delta sub H m (o)[Mn(eta (5)-C 5H 5)(CO) 3] = 75.97 +/- 0.37 kJ x mol (-1) from Knudsen effusion and Calvet-drop microcalorimetry measurements, thus considerably improving the very large inaccuracy (>10 kJ x mol (-1)) of the published data. The obtained value was used to assess the extension of the OPLS-based all-atom force field we previously developed for iron metallocenes to manganese organometallic compounds. The modified force field was able to reproduce the volumetric properties (density and unit-cell volume) of crystalline Mn(eta (5)-C 5H 5)(CO) 3 with a deviation of 0.6% and the experimentally determined enthalpy of sublimation with an accuracy of 1 kJ x mol (-1). The interaction (epsilon) and atomic-diameter (sigma) parameters of the Lennard-Jones (12-6) potential function used to calculate dispersion contributions within the framework of the force field were found to be transferable from iron to manganese.     

Experimental and molecular dynamics simulation study of the sublimation and vaporization energetics of iron metalocenes. crystal structures of Fe(eta5-C5H4CH3)2 and Fe[(eta5-(C5H5)(eta5-C5H4CHO)

The standard molar enthalpies of sublimation of ferrocene, 1,1'-dimethylferrocene, decamethylferrocene, ferrocenecarboxaldehyde and alpha-methylferrocenemethanol, and the enthalpy of vaporization of N,N-dimethyl(aminomethyl)ferrocene, at 298.15 K, were determined by Calvet-drop microcalorimetry and/or the Knudsen effusion method. The obtained values were used to assess and refine our previously developed force field for metallocenes. The modified force field was able to reproduce the deltasubHdegreesm and deltavapHdegreesm values of the test-set with an accuracy better than 5 kJ.mol-1, except for decamethylferrocene, in which case the deviation between the calculated and experimental deltasubHdegreesm values was 16.1 kJ.mol-1. The origin of the larger error found in the prediction of the sublimation energetics of decamethylferrocene, and which was also observed in the estimation of structural properties (e.g., density and unit cell dimensions), is discussed. Finally, the crystal structures of Fe(eta5-C5H4CH3)2 and Fe[(eta5-(C5H5)(eta5-C5H4CHO)] at 293 and 150 K, respectively, are reported.     

Gas-phase acidities and O-H bond dissociation enthalpies of phenol, 3-methylphenol, 2,4,6-trimethylphenol, and ethanoic acid

Energy-resolved, competitive threshold collision-induced dissociation (TCID) methods are used to measure the gas-phase acidities of phenol, 3-methylphenol, 2,4,6-trimethylphenol, and ethanoic acid relative to hydrogen cyanide, hydrogen sulfide, and the hydroperoxyl radical using guided ion beam tandem mass spectrometry. The gas-phase acidities of Delta(acid)H298(C6H5OH) = 1456 +/- 4 kJ/mol, Delta(acid)H298(3-CH3C6H4OH) = 1457 +/- 5 kJ/mol, Delta(acid)H298(2,4,6-(CH3)3C6H2OH) = 1456 +/- 4 kJ/mol, and Delta(acid)H298(CH3COOH) = 1457 +/- 6 kJ/mol are determined. The O-H bond dissociation enthalpy of D298(C6H5O-H) = 361 +/- 4 kJ/mol is derived using the previously published experimental electron affinity for C6H5O, and thermochemical values for the other species are reported. A comparison of the new TCID values with both experimental and theoretical values from the literature is presented.     

o-(Cyclohexyliminoethyl)(arylamido)benzene and related complexes of zirconium and titanium. The non-innocence of the ketimino functionality

N-Arylamido complexes of zirconium in which the amido functional group is attached to an o-(alkyliminoethyl) substituted aromatic ring, have been synthesised by salt elimination reactions and characterised by spectroscopic and diffraction methods; they are analogous to the N-silylamido species recently reported (Dalton Trans., 2002, 3290-3299). The ligands 2-[CyN=C(CH(3))]C(6)H(4)N(H)(xyl), L(xyl)H, and 2-[CyN=C(CH(3))]C(6)H(4)N(H)(mes) L(mes)H, Cy = C(6)H(11), xyl = 3,5-Me(2)C(6)H(3) mes = 2,4,6-Me(3)C(6)H(2), were prepared in good yields by Buchwald-Hartwig amination of the arylbromides with 2-[CyN=C(CH(3))]C(6)H(4)NH(2). Reaction of L(mes)Li with Zr(NEt(2))(2)Cl(2)(thf)(2) gave after chloride substitution the arylamido ketimino complex L(mes)Zr(NEt(2))(2)Cl 1; variable amounts of the arylamido vinylamido complex 2 were also obtained. Interaction of L(mes)Li or L(xyl)Li with Ti(NMe(2))(2)Cl(2) gave rise to the tripodal bis-amido amino complexes 5 and 6 possibly formed by ligand rearrangement involving migration of the dimethylamido group to the ketimino carbon.     

Structures, energetics, and aromaticities of the tetrasilacyclobutadiene dianion and related compounds: (Si4H4)(2-), (Si4H4)(2-)·2Li+, [Si4(SiH3)4](2-)·2Li+, [Si4(SiH3)4](2-)·2Na+, and [Si4(SiH3)4](2-)·2K+

In light of the important recent synthesis of a stable tetrasilacyclobutadiene dianion compound by Sekiguchi and co-workers and the absence of theoretical studies, ab initio methods have been used to investigate this dianion and a number of related species. These theoretical methods predict multiple minima for each compound, and most minima contain folded and bicyclic silicon rings. For (Si(4)H(4))(2-), (Si(4)H(4))(2-)·2Li(+), [Si(4)(SiH(3))(4)](2-)·2Li(+), [Si(4)(SiH(3))(4)](2-)·2Na(+), and [Si(4)(SiH(3))(4)](2-)·2K(+), respectively, the energetically lowest-lying structures are designated A-3 (C(2v) symmetry), B-8 (C(1) symmetry), C-1 (C(2) symmetry), D-1 (C(2) symmetry), and E-1 (C(2h) symmetry). None of these structures satisfies both the ring planarity and the cyclic bond equalization criteria of aromaticity. However, all of the representative NICS values of these lowest-lying structures are negative, indicating some aromatic character. Especially, structures C-1 and D-1 of C(2) symmetry effectively satisfy the criteria of aromaticity due to the slightly trapezoidal silicon rings, which are nearly planar with nearly equal bond lengths. SiH(3) substitution for hydrogen in (Si(4)H(4))(2-)·2Li(+) significantly reduces the degree of aromaticity, as reflected in the substantially smaller NICS absolute values for [Si(4)(SiH(3))(4)](2-)·2Li(+) than those of (Si(4)H(4))(2-) and (Si(4)H(4))(2-)·2Li(+). The aromaticity is further weakened in [Si(4)(SiH(3))(4)](2-)·2Na(+) and [Si(4)(SiH(3))(4)](2-)·2K(+) by replacing lithium with the sodium and potassium cations.     

Homoleptic organometallic anions of Ti, Zr, Hf, and Nb

Reactions of C(6)H(5)Li and 4-CH(3)C(6)H(4)Li with halides of Ti, Ir, Hf, and Nb lead to the formation of homoleptic organometallic anions of these metals. Owing to their thermal instability and their sensitivity towards H(2) O and O(2) , these compounds are characterized by single-crystal structure determinations at low temperature, whereas other physical data could only be obtained occasionally. Three pentacoordinate complex anions [Ti(C(6)H(5))(5)](-), [Ti(4-CH(3)C(6)H(4))(5)](-), and [Zr(C(6)H(5))(5)](-) have square-pyramidal structures that display only slight deviations from the ideal geometry, in contrast to the already known structures of [Ti(CH(5))(5)](-). The hexacoordinate complex anions [Zr(C(6)H(5))(6)](2-), [Zr(4-CH(3)C(6)H(4))(6)](2-), [Nb(C(6)H(5))(6)](2-), and [Nb(4-CH(3)C(6)H(4))(6)](2-) all have trigonal-prismatic structures, in accord with the known hexamethyl complex dianions. In contrast, the hexacoordinate complex anion [Hf(C(6)H(5))(6)](2)(-) has an octahedral or close to octahedral structure, in contrast to the known trigonal-prismatic structures of [Ta(C(6)H(5))(6)](-) and [Ta(4-CH(3)C(6)H(4))(6) (-). A qualitative explanation for this structural variability is given.