Reconciling semiclassical and Bohmian mechanics: IV. Multisurface dynamics

In previous articles (J. Chem. Phys. 2004, 121, 4501; 2006, 124, 034115; 2006, 124, 034116) a bipolar counter-propagating wave decomposition, Psi = Psi+ + Psi-, was presented for stationary states Psi of the one-dimensional Schr?dinger equation, such that the components Psi+/- approach their semiclassical WKB analogs in the large action limit. The corresponding bipolar quantum trajectories are classical-like and well-behaved, even when Psi has many nodes or is wildly oscillatory. In this paper, the method is generalized for multisurface scattering applications and applied to several benchmark problems. A natural connection is established between intersurface transitions and (+ <--> -) transitions.     

Photoionization-induced water migration in the amide group of trans-acetanilide-(H2O)1 in the gas phase

IR-dip spectra of trans-acetanilide-water 1:1 cluster, AA-(H(2)O)(1), have been measured for the S(0) and D(0) state in the gas phase. Two structural isomers, where a water molecule binds to the NH group or the CO group of AA, AA(NH)-(H(2)O)(1) and AA(CO)-(H(2)O)(1), are identified in the S(0) state. One-color resonance-enhanced two-photon ionization, (1 + 1) RE2PI, of AA(NH)-(H(2)O)(1) via the S(1)-S(0) origin generates [AA(NH)-(H(2)O)(1)](+) in the D(0) state, however, photoionization of [AA(CO)-(H(2)O)(1)] does not produce [AA(CO)-(H(2)O)(1)](+), leading to [AA(NH)-(H(2)O)(1)](+). This observation explicitly indicates that the water molecule in [AA-(H(2)O)(1)](+) migrates from the CO group to the NH group in the D(0) state. The reorganization of the charge distribution from the neutral to the D(0) state of AA induces the repulsive force between the water molecule and the CO group of AA(+), which is the trigger of the water migration in [AA-(H(2)O)(1)](+).     

Coupled-states statistical investigation of vibrational and rotational relaxation of OH(2pi) by collisions with atomic hydrogen

We report state-to-state cross sections and thermal rate constants for vibrational and rotational relaxation of OH(2pi) by collision with H atoms. The cross sections are calculated by the coupled-states (CS) statistical method including the full open-shell character of the OH + H system. Four potential energy surfaces (PESs) ((1,3)A' and (1,3)A') describe the interaction of OH(X2pi) with H atoms. Of these, three are repulsive, and one (1A') correlates with the deep H2O well. Consequently, rotationally and ro-vibrationally inelastic scattering of OH in collisions with H can occur by scattering on the repulsive PESs, in a manner similar to the inelastic scattering of OH by noble gas atoms, or by collisions which enter the H2O well and then reemerge. At 300 K, we predict large (approximately 1 x 10(-10) cm3 molecule(-1) s(-1)) vibrational relaxation rates out of both v = 2 and v = 1, comparable to earlier experimental observations. This anomalously fast relaxation results from capture into the H2O complex. There exists a significant propensity toward formation of OH in the pi(A') lambda-doublet level. We also report state-resolved cross sections and rate constants for rotational excitation within the OH v = 0 manifold. Collisional excitation from the F1 to the F2 spin-orbit manifold leads to an inverted lambda-doublet population.     

Molecular packing tunes the activity of Kluyveromyces lactis beta-galactosidase incorporated in Langmuir-Blodgett films

Functional consequences of constraining beta-Gal in bidimensional space were studied at defined molecular packing densities and constant topology. Langmuir-Blodgett films, LB15 and LB35 composed of dipalmitoyl phosphatidylcholine and K. lactis beta-Gal, were obtained by transferring Langmuir films (L) initially packed at 15 and 35 mN/m, respectively, to alkylated glasses. The beta-Gal-monolayer binding equilibrium, mainly the adsorption rate and affinity, depended on the initial monolayer's surface pressure (lower for higher pi i). At pi i = 15 and 35 mN/m, the surface excess (Gamma) followed downward parabolic and power-law tendencies, respectively, as a function of subphase protein concentration. Gamma values in L roughly reflected the protein surface density chemically determined in LBs (0-7.5 ng/mm2 at pi i = 0-35 mN/m and [beta-Gal] subphase = 0-100 microg/mL). The beta-Gal-catalyzed hydrolysis of o-nitrophenyl-galactopyranoside showed a Michaelian kinetics in solution as well as in LB15. KM, KM,LB15, Vmax, and Vmax,LB15 were 5.15 +/- 2.2 and 9.25 +/- 6 mM and 39.63 and 0.0096 +/- 0.0027 micromol/min/mg protein, respectively. The sigmoidal kinetics observed with LB35 was evaluated by Hill's model (K0.5 = 9.55 +/- 0.4 mM, Vmax,35 = 0.0021 micromol/min/mg protein, Hill coefficient n = 9) and Savageau's fractal model (fractal constant K f = 9.84 mM; reaction order for the substrate gs = 9.06 and for the enzyme ge = 0.62). Fractal reaction orders would reflect the fractal organization of the environment, demonstrated by AFM images, more than the molecularity of the reaction. Particular dynamics of the protein-lipid structural coupling in each molecular packing condition would have led to the different kinetic responses.     

Activation energy for the disproportionation of HBrO2 and estimated heats of formation of HBrO2 and BrO2

The kinetics of the reaction HBrO(2) + HBrO(2) --> HOBr + BrO(3)(-) + H(+) is investigated in aqueous HClO(4) (0.04-0.9 M) and H(2)SO(4) (0.3-0.9 M) media and at temperatures in the range 15-38 degrees C. The reaction is found to be cleanly second order in [HBrO(2)], with the experimental rate constant having the form k(exp) = k + k'[H(+)]. The half-life of the reaction is on the order of a few tenths of a second in the range 0.01 M < [HBrO(2)](0) < 0.02 M. The detailed mechanism of this reaction is discussed. The activation parameters for kare found to be E(double dagger) = 19.0 +/- 0.9 kJ/mol and DeltaS(double dagger) = -132 +/- 3 J/(K mol) in HClO(4), and E(double dagger) = 23.0 +/- 0.5 kJ/mol and DeltaS(double dagger) = -119 +/- 1 J/(K mol) in H(2)SO(4). The activation parameters for k' are found to be E(double dagger) = 25.8 +/- 0.5 kJ/mol and DeltaS(double dagger) = -106 +/- 1 J/(K mol) in HClO(4), and E(double dagger) = 18 +/- 3 kJ/mol and DeltaS(double dagger) = -130 +/- 11 J/(K mol) in H(2)SO(4). The values Delta(f)H(29)(8)(0)[BrO(2)(aq)] = 157 kJ/mol and Delta(f)H(29)(8)(0)[HBrO(2)(aq)] = -33 kJ/mol are estimated using a trend analysis (bond strengths) based on the assumption Delta(f)H(29)(8)(0)[HBrO(2)(aq)] lies between Delta(f)H(29)(8)(0)[HOBr(aq)] and Delta(f)H(29)(8)(0)[HBrO(3)(aq)] as Delta(f)H(29)(8)(0)[HClO(2)(aq)] lies between Delta(f)H(29)(8)(0)[HOCl(aq)] and Delta(f)H(29)(8)(0)[HClO(3)(aq)]. The estimated value of Delta(f)H(29)(8)(0)[BrO(2)(aq)] agrees well with calculated gas-phase values, but the estimated value of Delta(f)H(29)(8)(0)[HBrO(2)(aq)], as well as the tabulated value of Delta(f)H(29)(8)(0)[HClO(2)(aq)], is in substantial disagreement with calculated gas-phase values. Values of Delta(r)H(0) are estimated for various reactions involving BrO(2) or HBrO(2).     

A general formalism of deriving the pair potential of polymer chains for arbitrary interaction potentials between isolated chain segments at and close to the theta-point

A formalism has been worked out which allows to transform any non-punctiform segment-segment potential of isolated polymer segments ε of fairly short-ranged character into the pair-potentialU operating between linear polymer chains with a certain reference to the arguments as they have been originally put forward byFlory andKrigbaum. Although no restrictions are made in the derivation as to the repulsive or attractive contribution of the segment-segment potential ε because of some known general deficiencies of theFlory-Krigbaum treatment for exclusively repulsive interaction, the resulting equations are primarily intended to describe the thermodynamic situation at and close to the θ-point where repulsion and attraction—though working at different ranges of segment separation—cancel. As the equation derived is somewhat complicated two different approximate forms have been developed: The first one is based on aTaylor series expansion retaining terms up to the fourth order which allows to characterizeU by the second and the fourth moment of the pair segment-segment distribution function, β and γ (β being the so-called binary cluster integral of segment-segment interaction, which is considered to be zero for θ-conditions). In this caseU may be represented by an expression of the general form $$U/kT = A(1 - BR^2 )\exp \{ - bR^2 \} .$$ The second method is based on a separate integration over the repulsive and attractive ranges of ε giving the repulsive (U ₊) and the attractive (U _?) part ofU finally after some approximations leading to an equation of the general form $$U/kT = (U_ + + U_ - )/kT = A_1 \exp \{ - b_1 R^2 \} - A_2 \exp \{ - b_2 R^2 \} .$$ In both cases the knowledge of the exact form of ε is dispensable, only β and γ—or for the second case their repulsive (β₊ and γ₊) and attractive (β_? and γ_?) parts have to be known. It is shown that the approximations are in excellent accordance with the exact form so that they may be conveniently used to describe pair potentials of polymer chains and to analyze pair potentials of segment-segment interactions under the limitations and conditions indicated.     

Syntheses, luminescence behavior, and assembly reaction of tetraalkynylplatinate(II) complexes: crystal structures of [Pt((t)Bu(3)trpy)(Ctbd1;CC(5)H(4)N)Pt((t)Bu(3)trpy)](PF(6))(3) and [Pt(2)Ag(4)(Ctbd1;CCtbd1;CC(6)H(4)CH(3)-4)(8)(THF)(4)

A series of tetraalkynylplatinate(II) complexes, (NBu(4))(2)[Pt(Ctbd1;CR)(4)] (R = C(6)H(4)N-4, C(6)H(4)N-3, and C(6)H(3)N(2)-5), and the diynyl analogues, (NBu(4))(2)[Pt(Ctbd1;CCtbd1;CR)(4)] (R = C(6)H(5) and C(6)H(4)CH(3)-4), have been synthesized. These complexes displayed intense photoluminescence, which was assigned as metal-to-ligand charge transfer (MLCT) transitions. Reaction of (Bu(4)N)(2)[Pt(Ctbd1;CC(5)H(4)N-4)(4)] with 4 equiv of [Pt((t)Bu(3)trpy)(MeCN)](OTf)(2) in methanol did not yield the expected pentanuclear platinum product, [Pt(Ctbd1;CC(5)H(4)N)(4)[Pt((t)Bu(3)trpy)](4)](OTf)(6), but instead afforded a strongly luminescent 4-ethynylpyridine-bridged dinuclear complex, [Pt((t)Bu(3)trpy)(Ctbd1;CC(5)H(4)N)Pt((t)Bu(3)trpy)](PF(6))(3,) which has been structurally characterized. The emission origin is assigned as derived from states of predominantly (3)MLCT [d(pi)(Pt) --> pi((t)Bu(3)trpy)] character, probably mixed with some intraligand (3)IL [pi --> pi(Ctbd1;C)], and ligand-to-ligand charge transfer (3)LLCT [pi(Ctbd1;C) --> pi((t)()Bu(3)trpy)] character. On the other hand, reaction of (Bu(4)N)(2)[Pt(Ctbd1;CCtbd1;CC(6)H(4)CH(3)-4)(4)] with [Ag(MeCN)(4)][BF(4)] gave a mixed-metal aggregate, [Pt(2)Ag(4)(Ctbd1;CCtbd1;CC(6)H(4)CH(3)-4)(8)(THF)(4)]. The crystal structure of [Pt(2)Ag(4)(Ctbd1;CCtbd1;CC(6)H(4)CH(3)-4)(8)(THF)(4)] has also been determined. A comparison study of the spectroscopic properties of the hexanuclear platinum-silver complex with its precursor complex has been made and their spectroscopic origins were suggested.     

Experimental and theoretical study of the photodissociation reaction of thiophenol at 243 nm: intramolecular orbital alignment of the phenylthiyl radical

The photoinduced hydrogen (or deuterium) detachment reaction of thiophenol (C(6)H(5)SH) or thiophenol-d(1) (C(6)H(5)SD) pumped at 243 nm has been investigated using the H (D) ion velocity map imaging technique. Photodissociation products, corresponding to the two distinct and anisotropic rings observed in the H (or D) ion images, are identified as the two lowest electronic states of phenylthiyl radical (C(6)H(5)S). Ab initio calculations show that the singly occupied molecular orbital of the phenylthiyl radical is localized on the sulfur atom and it is oriented either perpendicular or parallel to the molecular plane for the ground (B(1)) and the first excited state (B(2)) species, respectively. The experimental energy separation between these two states is 2600+/-200 cm(-1) in excellent agreement with the authors' theoretical prediction of 2674 cm(-1) at the CASPT2 level. The experimental anisotropy parameter (beta) of -1.0+/-0.05 at the large translational energy of D from the C(6)H(5)SD dissociation indicates that the transition dipole moment associated with this optical transition at 243 nm is perpendicular to the dissociating S-D bond, which in turn suggests an ultrafast D+C(6)H(5)S(B(1)) dissociation channel on a repulsive potential energy surface. The reduced anisotropy parameter of -0.76+/-0.04 observed at the smaller translational energy of D suggests that the D+C(6)H(5)S(B(2)) channel may proceed on adiabatic reaction paths resulting from the coupling of the initially excited state to other low-lying electronic states encountered along the reaction coordinate. Detailed high level ab initio calculations adopting multireference wave functions reveal that the C(6)H(5)S(B(1)) channel may be directly accessed via a (1)(n(pi),sigma(*)) photoexcitation at 243 nm while the key feature of the photodissociation dynamics of the C(6)H(5)S(B(2)) channel is the involvement of the (3)(n(pi),pi(*))-->(3)(n(sigma),sigma(*)) profile as well as the spin-orbit induced avoided crossing between the ground and the (3)(n(pi),sigma(*)) state. The S-D bond dissociation energy of thiophenol-d(1) is accurately estimated to be D(0)=79.6+/-0.3 kcalmol. The S-H bond dissociation energy is also estimated to give D(0)=76.8+/-0.3 kcalmol, which is smaller than previously reported ones by at least 2 kcalmol. The C-H bond of the benzene moiety is found to give rise to the H fragment. Ring opening reactions induced by the pi-pi(*)n(pi)-pi(*) transitions followed by internal conversion may be responsible for the isotropic broad translational energy distribution of fragments.     

AFM colloidal forces measured between microscopic probes and flat substrates in nanoparticle suspensions

Colloidal forces between atomic force microscopy probes of 0.12 and 0.58 N/m spring constant and flat substrates in nanoparticle suspensions were measured. Silicon nitride tips and glass spheres with a diameter of 5 and 15 mum were used as the probes whereas mica and silicon wafer were used as substrates. Aqueous suspensions were made of 5-80 nm alumina and 10 nm silica particles. Oscillatory force profiles were obtained using atomic force microscope. This finding indicates that the nanoparticles remain to be stratified in the intervening liquid films between the probe and substrate during the force measurements. Such structural effects were manifested for systems featuring attractive and weak repulsive interactions of nanoparticles with the probe and substrate. Oscillation of the structural forces shows a periodicity close to the size of nanoparticles in the suspension. When the nanoparticles are oppositely charged to the probes, they tend to coat the probes and hinder probe-substrate contact.     

Weak distance dependence of through-bond interactions in tetrahydro-4H-thiopyran-4-ylidene end-capped oligo(cyclohexylidenes); a computational survey

Calculations on members of the oligo(cyclohexylidene) series [(n), n = 1-5)] and related tetrahydro-4H-thiopyran end-capped analogues [(n), n = 1-4)] show a strong through-bond coupling between their pi bonds and sulfur lone pairs (Lp(pi)S). This coupling is mediated by an interaction between the H(ax)-C-C-H(ax) structural sub-units and the pi bonds connecting the cyclohexyl moieties. A comparison of the length dependency of the through-bond coupling via an oligo(cyclohexylidene) and an alkane bridge [divinyl alkanes (n)] shows that oligo(cyclohexylidenes) are more efficient in mediating through-bond couplings over large distances. Oligo(cyclohexylidene) bridges exhibit molecular wire characteristics.     

Intramolecular "Aryl-metal chelate ring" pi,pi-interactions as structural evidence for metalloaromaticity in (aromatic alpha,alpha'-diimine)-copper(II) chelates: molecular and crystal structure of aqua(1,10-phenanthroline)(2-benzylmalonato)copper(II) three-hydrate

By reaction of Cu(2)CO(3)(OH)(2), 2-benzylmalonic acid (H(2)Bzmal), and 1,10-phenanthroline (phen), [Cu(Bzmal)(phen)(H(2)O)] x 3H(2)O (compound 1) has been obtained and characterized by thermal, spectral, magnetic, and X-ray diffraction methods. The molecular structure of 1 is remarkably similar to that of [Cu(Bzmal)(bipy)(H(2)O)] x 2H(2)O (compound 2, bipy = 2,2'-bipyridine). In both complexes, the aryl(Bzmal) ring produces an unexpected pi,pi-stacking interaction with the Cu(II)-(aromatic alpha,alpha'-diimine) chelate ring, at an average distance d(pi)(-)(pi) of 3.40 A, involving roughly parallel and smoothly slipped rings. This insight is discussed as new structural evidence for metalloaromaticity of Cu(II)-(aromatic alpha,alpha'-diimine) chelate rings. Interestingly, 1 recognizes itself by a weak intermolecular pi,pi-stacking interaction between aryl(Bzmal) ligands to give pairs of complex molecules. In contrast, there is an intermolecular pyridyl-pyridyl pi,pi-stacking interaction also forming pairs of complex molecules in 2.     

The dissociation/recombination reaction CH4 (+M) ⇔ CH3 + H (+M): a case study for unimolecular rate theory

The dissociation/recombination reaction CH(4) (+M) ? CH(3) + H (+M) is modeled by statistical unimolecular rate theory completely based on dynamical information using ab initio potentials. The results are compared with experimental data. Minor discrepancies are removed by fine-tuning theoretical energy transfer data. The treatment accounts for transitional mode dynamics, adequate centrifugal barriers, anharmonicity of vibrational densities of states, weak collision and other effects, thus being "complete" from a theoretical point of view. Equilibrium constants between 300 and 5000 K are expressed as K(c) = k(rec)/k(dis) = exp(52,044 K/T) [10(-24.65) (T/300 K)(-1.76) + 10(-26.38) (T/300 K)(0.67)] cm(3) molecule(-1), high pressure recombination rate constants between 130 and 3000 K as k(rec,∞) = 3.34 × 10(-10) (T/300 K)(0.186) exp(-T/25,200 K) cm(3) molecule(-1) s(-1). Low pressure recombination rate constants for M = Ar are represented by k(rec,0) = [Ar] 10(-26.19) exp[-(T/21.22 K)(0.5)] cm(6) molecule(-2) s(-1), for M = N(2) by k(rec,0) = [N(2)] 10(-26.04) exp[-(T/21.91 K)(0.5)] cm(6) molecule(-2) s(-1) between 100 and 5000 K. Weak collision falloff curves are approximated by asymmetric broadening factors [J. Troe and V. G. Ushakov, J. Chem. Phys. 135, 054304 (2011)] with center broadening factors of F(c) ≈ 0.262 + [(T - 2950 K)/6100 K](2) for M = Ar. Expressions for other bath gases can also be obtained.     

Redox properties of ruthenium nitrosyl porphyrin complexes with different axial ligation: structural, spectroelectrochemical (IR, UV-visible, and EPR), and theoretical studies

Experimental and computational results for different ruthenium nitrosyl porphyrin complexes [(Por)Ru(NO)(X)] ( n+ ) (where Por (2-) = tetraphenylporphyrin dianion (TPP (2 (-) )) or octaethylporphyrin dianion (OEP (2-)) and X = H 2O ( n = 1, 2, 3) or pyridine, 4-cyanopyridine, or 4- N,N-dimethylaminopyridine ( n = 1, 0)) are reported with respect to their electron-transfer behavior. The structure of [(TPP)Ru(NO)(H 2O)]BF 4 is established as an {MNO} species with an almost-linear RuNO arrangement at 178.1(3) degrees . The compound [(Por)Ru(NO)(H 2O)]BF 4 undergoes two reversible one-electron oxidation processes. Spectroelectrochemical measurements (IR, UV-vis-NIR, and EPR) indicate that the first oxidation occurs on the porphyrin ring, as evident from the appearance of diagnostic porphyrin radical-anion vibrational bands (1530 cm (-1) for OEP (*-) and 1290 cm (-1) for TPP (*-)), from the small shift of approximately 20 cm (-1) for nu NO and from the EPR signal at g iso approximately 2.00. The second oxidation, which was found to be electrochemically reversible for the OEP compound, shows a 55 cm (-1) shift in nu NO, suggesting a partially metal-centered process. The compounds [(Por)Ru(NO)(X)]BF 4, where X = pyridines, undergo a reversible one-electron reduction. The site of the reduction was determined by spectroelectrochemical studies to be NO-centered with a ca. -300 cm (-1) shift in nu NO. The EPR response of the NO (*) complexes was essentially unaffected by the variation in the substituted pyridines X. DFT calculations support the interpretation of the experimental results because the HOMO of [(TPP)Ru(NO)(X)] (+), where X = H 2O or pyridines, was calculated to be centered at the porphyrin pi system, whereas the LUMO of [(TPP)Ru(NO)(X)] (+) has about 50% pi*(NO) character. This confirms that the (first) oxidation of [(Por)Ru(NO)(H 2O)] (+) occurs on the porphyrin ring wheras the reduction of [(Por)Ru(NO)(X)] (+) is largely NO-centered with the metal remaining in the low-spin ruthenium(II) state throughout. The 4% pyridine contribution to the LUMO of [(TPP)Ru(NO)(py)] (+) is correlated with the stability of the reduced form as opposed to that of the aqua complex.     

H atom transfer along an ammonia chain: tunneling and mode selectivity in 7-hydroxyquinoline.(NH3)3

Excitation of the 7-hydroxyquinoline(NH(3))(3) [7HQ(NH(3))(3)] cluster to the S(1) (1)pi pi(*) state results in an O-H-->NH(3) hydrogen atom transfer (HAT) reaction. In order to investigate the entrance channel, the vibronic S(1)<-->S(0) spectra of the 7HQ.(NH(3))(3) and the d(2)-7DQ.(ND(3))(3) clusters have been studied by resonant two-photon ionization, UV-UV depletion and fluorescence techniques, and by ab initio calculations for the ground and excited states. For both isotopomers, the low-frequency part of the S(1)<--S(0) spectra is dominated by ammonia-wire deformation and stretching vibrations. Excitation of overtones or combinations of these modes above a threshold of 200-250 cm(-1) for 7HQ.(NH(3))(3) accelerates the HAT reaction by an order of magnitude or more. The d(2)-7DQ.(ND(3))(3) cluster exhibits a more gradual threshold from 300 to 650 cm(-1). For both isotopomers, intermolecular vibrational states above the threshold exhibit faster HAT rates than the intramolecular vibrations. The reactivity, isotope effects, and mode selectivity are interpreted in terms of H atom tunneling through a barrier along the O-H-->NH(3) coordinate. The barrier results from a conical intersection of the optically excited (1)pi pi(*) state with an optically dark (1)pi sigma(*) state. Excitation of the ammonia-wire stretching modes decreases both the quinoline-O-H...NH(3) distance and the energetic separation between the (1)pi pi(*) and (1)pi sigma(*) states, thereby increasing the H atom tunneling rate. The intramolecular vibrations change the H bond distance and modulate the (1)pi pi(*)<-->(1)pi sigma(*) interaction to a much smaller extent.     

Kinetics of the unimolecular decomposition of the 2-chloroallyl radical

The thermal decomposition of the 2-chloroallyl radical, CH(2)CClCH(2) --> CH(2)CCH(2) + Cl (1), was studied using the laser photolysis/photoionization mass spectrometry technique. Rate constants were determined in time-resolved experiments as a function of temperature (720-840 K) and bath gas density ([He] = (3-12) x 10(16), [N(2)] = 6 x 10(16) molecule cm(-3)). C(3)H(4) was observed as a primary product of reaction 1. The rate constants of reaction 1 are in the falloff, close to the low-pressure limit, under the conditions of the experiments. The potential energy surface (PES) of reaction 1 was studied using a variety of quantum chemical methods. The results of the study indicate that the minimum energy path of the CH(2)CClCH(2) dissociation proceeds through a PES plateau corresponding to a weakly bound Cl-C(3)H(4) complex; a PES saddle point exists between the equilibrium CH(2)CClCH(2) structure and the Cl-C(3)H(4) complex. The results of quantum chemical calculations, the rate constant values obtained in the experimental study, and literature data on the reverse reaction of addition of Cl to allene were used to create a model of reactions 1 and -1. The experimental dependences of the rate constants on temperature and pressure were reproduced in RRKM/master equation calculations. The reaction model provides expressions for the temperature dependences of the high-pressure-limit and the low-pressure-limit rate constants and the falloff broadening factors (at T = 300-1600 K): k(infinity)(1) = 1.45 x 10(20)T(-1.75) exp(-19609 K/T) s(-1), k(infinity)(-)(1) = 8.94 x 10(-10)T(-0.40) exp(481 K/T) cm(3) molecule(-1) s(-1), k(1)(0)(He) = 5.01 x 10(-32)T(-12.02) exp(-22788 K/T) cm(3) molecule(-1) s(-1), k(1)(0)(N(2)) = 2.50 x 10(-32)T(-11.92) exp(-22756 K/T) cm(3) molecule(-1) s(-1), F(cent)(He) = 0.46 exp(-T/1001 K) + 0.54 exp(-T/996 K) + exp(-4008 K/T), and F(cent)(N(2)) = 0.37 exp(-T/2017 K) + 0.63 exp(-T/142 K) + exp(-4812 K/T). The experimental data are not sufficient to specify all the parameters of the model; consequently, some of the model parameters were obtained from quantum chemical calculations and from analogy with other reactions of radical decomposition. Thus, the parametrization is most reliable under conditions close to those used in the experiments.     

Nanomosaic: formation of nanodomains confined in a two-dimensional molecular plane

Atomic force microscopy observations of a (hydrocarbon guanidinium/fluorocarbon carboxylic acid) mixed monolayer revealed that a nanoscopic phase-separated structure was formed by a combination of attractive interaction between the oppositely charged head groups and repulsive phase separation of the hydrocarbon and fluorocarbon chains.     

Characteristics of antiaromatic ring pi multi-hydrogen bonds in (H2O)n-C4H4 (n = 1, 2) complexes

By counterpoise-corrected optimization method, the six antiaromatic ring pi multi-hydrogen bond structures with diversiform shapes for (H2O)n-C4H4 (n = 1,2) have been obtained at the MP2/aug-cc-pVDZ level. At the CCSD(T)/aug-cc-pVDZ level, the interaction energy obtained mainly depends on the numbers of H2O and fold numbers of the pi multi-hydrogen bond. The interaction energy order is -2.342 (1a with pi mono-hydrogen) < -2.777 (1b with pi bi-hydrogen) < -4.683 (2a with pi bi-hydrogen) < -4.734 (2b with pi tri-hydrogen) < -4.782 (2c with pi tri-hydrogen) < -5.009 kcal/mol (2d with pi tetra-hydrogen bond). Strangely, why is the interaction energy of the pi bi-hydrogen bond in 1b close to that of the pi mono-hydrogen bond in 1a (their difference is only 15.7%)? The reason is that a pi-type H-bond (as an accompanying interaction) between two lone pairs of the O-atom and a near pair of H-atoms of C4H4 exists shoulder by shoulder in structures 1a, 2a, 2b, and 2c and contributes to the interaction energy. Another accompanying interaction, a repulsive interaction between the pi H-bond (using the H-atom(s) of H2O) and the near pair of H-atoms of C4H4, is also found. For the structures and interaction energies, the pi-type H-bond produces four effects: bending the strong pi H-bond, attracting the pair of H-atoms of C4H4 so that they deviate from the C4 ring plane, showing the interaction energy contribution, and bringing the larger electron correlation contribution. The repulsive interaction also produces four effects: pushing the pair of H-atoms of C4H4 so that they deviate from its ring plane, elongating the distance of the pi H-bond, promoting the formation of pi-type H-bond, and slightly influencing the interaction energy. In the present paper, one C=C bond with two H2O (over and below the ring plane) forms a pi H-bond link in two ways: a strong-weak pi H-bond link and a strong-strong pi H-bond link. The stability contribution of the former is more favorable than the latter. One H2O forms a pi H-bond with C4H4 in two ways. One strong pi H-bond part (over or below the ring plane) always is accompanied by another H-bond part. The accompanying part is either a weak pi H-bond or pi-type H-bond.     

Observation of vibronically excited thioformaldehyde at 62,000-72,000cm(-1) by 1+1'+1' resonance enhanced multiphoton ionization spectroscopy

Vibronically excited thioformaldehyde (H(2)CS) has been studied by two-color 1+1'+1' resonance enhanced multiphoton ionization (REMPI) spectroscopy, in which the C (1)B(2)0(0)(0) state of H(2)CS was selected as an intermediate state for the resonant excitation to high-lying electronic states at 62,000-72,000cm(-1). In light of the distinctive selection rules for the 1+1'+1' REMPI and one-photon direct absorption transitions excited from the C (1)B(2) and X (1)A(1) states of H(2)CS, respectively, we have been able to identify 1 valence state (npi, pi*(2)), and 14 Rydberg states (n, 5s), (pi, 4s), (n, 3d(xz)), (n, 3d(yz)), (n, 5p(z)), (n, 5p(x)), (n, 5p(y)), n,4d(z)2), (n, 4d(xz)), (n, 4d(yz)), (n, 6s), (pi, 4p(y)), (n, 6p(z)), and (n, 6p(y)), in this study.     

Ultraviolet photodissociation dynamics of the SH radical

Ultraviolet (UV) photodissociation dynamics of jet-cooled SH radical (in X 2pi(3/2), nu"=0-2) is studied in the photolysis wavelength region of 216-232 nm using high-n Rydberg atom time-of-flight technique. In this wavelength region, anisotropy beta parameter of the H-atom product is approximately -1, and spin-orbit branching fractions of the S(3P(J)) product are close to S(3P2):S(3P1):S(3P0)=0.51:0.36:0.13. The UV photolysis of SH is via a direct dissociation and is initiated on the repulsive 2sigma- potential-energy curve in the Franck-Condon region after the perpendicular transition 2sigma(-)-X 2pi. The S(3P(J)) product fine-structure state distribution approaches that in the sudden limit dissociation on the single repulsive 2sigma- state, but it is also affected by the nonadiabatic couplings among the repulsive 4sigma-, 2sigma-, and 4pi states, which redistribute the photodissociation flux from the initially excited 2sigma- state to the 4sigma- and 4pi states. The bond dissociation energy D0(S-H)=29,245+/-25 cm(-1) is obtained.